I have a Network Time server provided by my Smoothwall firewall and I can get all the computers on my Lan barring my F11 one, to sync with it.Using SSH I can connect into the F11 PC, what command do I need to run to force it to update?
View 4 RepliesIt seems that selinux has stop weav to sync the bookmarks.I followed the fix code as SELinux suggested,but it can't work.Does anyone know how to solve it?
View 3 Replies View RelatedI use jpilot on opensuse 11.3 64bit to sync pim data with my Palm Treo 680 via bluetooth. This worked fine until today. Now I get the following error message when I try to sync: Syncing on device bt: Press the HotSync button now dlp_ReadSysInfo error Exiting with status YNC_ERROR_PI_CONNECT Finished.
The last successfull sync was on the 20th October and today is the 24th October. I did not change any settings in jpilot or on my palm device. So I guess there must have been an update of opensuse which causes this error. But I do not now how to look up the updates during this period or how to undo them. Was there an update between the 20th and the 24th Oktober, which might affect either jpilot or bluetooth functionality?
I've discovered Firefox Sync a while ago, and it's absolutely awesome. Now of course I'd like most of my software to work this way! So is there a way to get the same behavior with Thunderbird?
View 1 Replies View RelatedI've got Ubuntu One syncing a single 25MB folder on 4 computers. On one of these computers, the ubuntuone-syncdaemon process constantly pegs the CPU, using from 50-80% long after any sync-able files have been modified and successfully synced. The process is only using 8.9MB of RAM.
Specs:
Ubuntu 10.04 (lucid)
Kernel 2.6.32-24-generic
1000.8 MB RAM
Pentium 4 2.53GHz
Free disk space: 280.9 GB
System monitor shows 56.8% total RAM usage, 15.4% swap file usage.
Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps, the parameter is the maximum samples per second by which the audio is changed. -async 1 is a special case where only the start of the audio stream is corrected without any later correction.Searching the net makes one believe that this command is just some sort of magic.People just put it in the line and it just works. Isn't that nice?
It says nothing about how to change the TIME the audio starts syncing. Like do I want it to start 5 seconds delayed? Or what about 5 seconds sooner?What if the audio gets more out of sync as the video goes on? Can I slip it a little at a time? What? No magic?No one mentions a file that already has badly synced audio.So what -async 1 really does is simply start the audio at the beginning of the file. LIKE AS IF THAT ISN'T STANDARD PROCEDURE?So what is the exact solution to syncing a messed up video? And why can't it just do the proper "timestamp" sync in the first place?No docs, no info and you are left out in the cold.
I want to change my default shell to tcsh. I used
Code:
usermod -s /bin/tcsh username
command as given at url
But if I open a new shell, it is still a bash shell.
How do I make my default shell as tcsh?
Is there anyway to sync my mtp device? I use Rythmbox and quite like it. It will let me drag and drop songs onto my MTP device. What I'm looking for is a true sync. Something that will delete from the device if it's been deleted from my library. Or update, or anything really. Just a sync, not a drag and drop.
View 14 Replies View RelatedHow is the best way to sync my iphone 4 on it? I tried itunes using wine, but sux... Doesn't work well.
View 4 Replies View Relatedsyncing their blackberry with Fedora 11. I followed the how to but haven't had any luck.
View 8 Replies View RelatedI have found that if I change the FPS of a video, the audio is out of sync.
Is there a way in mencoder to have it correct this, and maintain the correct sync?
I don't think it is just a matter of audio/video delay. I have tried many times to correct this via that method, and it doesn't come close. Although, if I encode the video to another format, but with the original fps, the audio is sync'd.
how to synchronize time in NFS client with its NFS server. I am using Fedora.
View 6 Replies View RelatedWhy it need to sync the repos database every time? Fedora is not a rolling release distro, so the packages don't change so often.. only with minor updates..For example: I have absolute certainty that emesene-1.6 is the same for the last 12 months, and I want to install it quickly.. what can I do to circumvent yum's obsession with repo syncing?
View 3 Replies View RelatedOn my network I have one computer running Fedora 14 and another running Ubuntu 1.0. I need to sync Evolution between these 2. The problem is Evolution folders have different content in the 2 distros. Is there a way to sync e-mails, contacts etc, between these 2 distros?
View 4 Replies View RelatedV.L.C. and all others - but Totem - video players that I have installed have audio out of sync. This occurs in both D.V.D. and .mkv & .avi. I had this problem with V.L.C. 1.1.10 & now with 1.1.11. I do not think that this is a problem with V.L.C. since I have had the same issue occur with gnome-mplayer. I tried to downgrade gstreamer*, and that did not correct my problem. It shouldn't be a problem with libdvd* since the problem still occurs with files on my drive. Handbrake doesn't fail to rip D.V.D correctly.
Because of all of this I figure that it must be a system library that Totem and HandBrake don't use ( or bundle most likely in the case of HandBrake ).I am using Fedora 15 x86_64 with all updates to date.
I was searching on google for syncing my iphone 3gs in linux. I have seen many forums which say that Rhythmbox and gtkpod are able to sync iphone but I did not find any of them to be very helpful in my case. Any Way syncing iphone in linux so that I don't have to boot to windows.
View 7 Replies View RelatedHOWTO: Sync Contacts between BlackBerry and Evolution on Fedora 10
1. Overview
Open source tools are available to sync a BlackBerry with Evolution but it appears these tools are not supported by Fedora 10. The main thing that seems to be missing is the Barry plugin for OpenSync. Maybe the reason that this package has not been created is that Barry requires OpenSync version 0.22, whereas F10 ships OpenSync version 0.36. This HOWTO explains how to build all of the required components from source code. If the required package becomes available, this HOWTO would then be redundant.
This entire build and installation is performed in the home directory of a non-root user to ensure that no system files are broken. Some of the commands in this HOWTO must be run as root, when this is the case it is stated explicitly and otherwise the commands in this document should be run under a non-root account. The username for the examples below is erik.
2. Be a Developer
When you install F10 you are prompted to specify the uses to which your computer will be put. Hopefully you selected software development, if not your machine will probably be missing many of the utilities required for this HOWTO.
3. Initialize Evolution
Open Evolution and click on all of the buttons at the left to ensure that the necessary databases are created.
4. Prepare The Environment
[Code]...
I've been trying to use cheese to record greeting from my kids to grand parents etc. But every time I record a video, the video is choppy and the audio sync is off. I've used the one in the (F11) repos and built it from source. It behaves the same using other distros as well. Is this par for the course with cheese, or is it my hardware?[URL]... Any other applications/methods to record audio & video while providing a video.
View 2 Replies View RelatedI would like to keep my Tomboy notes synced between my home computer and the LiveUSB I'm using at the classroom. I used to sync them to Ubuntu one back when I used Ubuntu, but now that I'm using Fedora their server doesn't seem to respond.Is there a way that I can sync the notes, either using Ubuntu one or any other solution?
View 2 Replies View RelatedHaving problems with yum in FC11, it is updates for files that do not exist.Did a 'yum clean metadb', 'yum clean cache', 'yum clean all' as that normally fixes issues, not this time.It does pull down all the xml files just fine, the problem is that the rpm filesets it suggests for update from those new files just do not exist.It only finds about 30 packages to update (as I have been a good boy and keep things updated) but none of the files actually exist on the mirror servers. I selected a single one here as I'm sure you don't want to trawl through the lot...
[root@eagle packages]# yum update bzr
Loaded plugins: priorities, refresh-packagekit
Setting up Update Process
[code]....
I then used firefox to browse the updates directories (at download.fedoraproject.org and some of the other mirrors) that were reporting the 404 errors, and the errors are correct, the files just do not exist (well not yet anyway).So are the updates repo files out of sync at that end or have I missed something obvious that I should also have deleted from the yum setup.
I have an F11 on an old box 686 athlon with an old nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] (rev 15) AGP. I am trying to do a network install upgrade to F13. I cannot get it to display the install menus from the network install disk. I get the initial screen with the install, basic video, repair, etc choices, but after I select the install/upgrade option, I see the CD drive read but the LCD monitor display never appears. The ready light on the monitor just keeps blinking and the display stays dark. Is there anyway of getting an error log to see what is going on?
View 3 Replies View RelatedI have installed Fedora today after trying various Linux Distributions. The only other one I really used for a longer time was ubuntu. So, theres an application for syncing Evolution with my Palm (Tungsten E2) which is called gnome-pilot. I set it up, but in contrast to ubuntu, I can't sync my Contacts and calendar with fedora. THe only things I can chose are shown on the screenshot below.
Is there any way to make my palm also sync its calendar (like it perfectly worked in ubuntu) ?
Edit: I was too stupid to search for "Gnome-Pilot" in the packet manager. Because if I did, i would have found "Additional conduits" which allows me to do that
Just upgraded Fedora 12->13 using yum, on my way to Fedora 15.After upgrade to 13, I rebooted, and all is fine.Began upgrade from 13->14. I get the following errors from yum --releasever=14 distro-sync:
Code:
Error: Package rhpl-0.221-2.i686 (@anaconda-InstallationRepo-200911081854.i386/12)
Requires: libpython2.6.so.1.0
[code].....
May I know if there is any tutorial to sync up Fedora DS to ADS?
View 2 Replies View Relatedable to get an I pod nano 3rd gen 4gig to sync with Rhythm box or sync rhythm box back to the Ipod?
View 2 Replies View RelatedI am using the akmod nvidia driver and I have the option for "sync to vblank" checked, however when running minecraft my computer is still pulling 200+ fps and it's causing tearing like a beast.Is anyone else having this problem? I don't know if my drivers are corrupted, set up improperly, or if the driver is just broken.
View 1 Replies View RelatedMy linux system is running from the ram (ramfs/tmpfs). Crated a partition type 'tmpfs'. Processes are reading/ writing from/to this partition files. I am looking for utilities to sync this partition to the remote storage regularly (say, once in 10 sec). Normal copy command will produce partial files, if the copy is getting executed during a write operation.
View 2 Replies View RelatedI am trying to find out the best way to sync my address book from my motorola razr v8, and eventually my new nexus one phone, to Evolution in fedora 12. I don't use bluetooth, just a simple usb connection.
View 1 Replies View RelatedMACHINE: HP Proliant DL260G5OS: SLES 11 SP1kernel: Linux xserver 2.6.32.12-0.7-default #1 SMP 2010-05-20 11:14:20 +0200 x86_64 x86_64 x86_64 GNU/LinuxIt is used as remote xserver in a LAN.I have configured /usr/lib/restricted/bin/.rbashrc with some environment variables but when the users logon in the system finally is executed $HOME/.bashrc and some environment vars are overwritten.
View 2 Replies View RelatedI am using ubuntu10.04-server 64bit AMD with fluxbox. After I ran Matlab in a shell (without GUI) the shell does not display characters anymore, but will execute any command, I just can't see the characters that I'm typing.. I use aterm and xterm, does anybody know why that is, am I missing a package?
View 1 Replies View Related