I find myself in need of the gd graphics library from php this page[RL]...seems to indicate I need to recompile php with a switch to enable it is this so? I've used it in the past, seems like it was just enabled by default here's the output of phpinfo()
View 5 RepliesIs there away to update my driver. In my Xorg.conf all I have under driver is "Intel" I am using an Intel GM45 card and I don't have 3D support.
View 14 Replies View RelatedI'm unable to use 3d accelerated graphics in the desktop effects. I'm getting the infamous 'Desktop Effects require hardware 3d support' error. My GPU is an ATI Radeon HD 5670, and I've already tried the proprietary driver from ATI. It hung my system and gave me loads of issues, and to be frank, the ATI driver has NEVER worked for me. I'm using 32-bit Fedora 14, but if I remember correctly the 64 bit version of Fedora 14 did let me do this without an installer.
View 7 Replies View RelatedI am thinking about buying a new computer. It has ATI Radeon HD 3000 Graphics. Does Fedora 14 support ATI Radeon HD 3000 Graphicst? Will I have to install a driver and if so where would I download the driver?
View 4 Replies View Related[A word of explanation: initially the post below followed a post by Adam Williamson in another thread devoted to inability to load GNOME 3 in VM; this is why I address Adam in the opening.]
Adam, the situation with the GNOME 3 support for Intel integrated graphics seems to be a little confusing. You are probably among the most competent to clarify it.
Let me tell my own story first.
I was installing earlier today Fedora 15 on an HP dm4-1160US laptop with i5 and Intel graphics, and the anaconda installer hung right after "Waiting for hardware to initialize..." flashed on the screen, before even Media Check screen was reached. I tried a few times, always with the sae result: anaconda hung. Then I decided to add nomodeset to the boot parameters and the anaconda installer went on and I was able to complete the installation without a slightest problem.
I rebooted and without a problem reached the GDM login screen. When logging into GNOME, a pop-up window informed me that the system was unable to load GNOME and that instead I would be logged into the fall back mode. By the way, I haven't experienced the problems that plagued "Classic GNOME" on another laptop of mine where instead of clean install I preupgraded from Fedora 14 (strictly following the guidelines for preupgrading).
Wireless card was recognized and wlan initialized, nearby wireless networks seen, yet I wasn't able to connect to my own wireless network (I tried to do this already in the process of installation, equally unsuccessfully).
I was able to connect via Ethernet cable, and then I proceeded to perform yum update.
The update brought a new kernel. I went into grub.conf and noticed that nomodeset has been automatically added to the boot parameters for each of the two kernels. I decided to perform an experiment: I removed nomodeset from the boot options for the new kernel, and left it in place for the anaconda installed kernel.
I rebooted into the new kernel. Right after the grub menu disappeared, the screen turned pitch black and stayed this way for good 10 seconds. I thought that the former situation repeats itself making impossible to boot without the nomodeset option. Suddenly, the screen lit up and the GDM login screen appeared.
I logged into a shiny GNOME 3 where I am writing these words right now. Ah, and I was also able to connect to the wireless (I made yet another attempt using the network manager applet -- this time it worked).
What does that seem to indicate? That GNOME 3 support is already available for Intel graphics chips? But one may need to play with the nomodeset cheatcode, as I described this above?
I found and modified the following file. It starts JBoss just fine. However, chkconfig refuses to --add it - saying the file doesn't support it.
its in /etc/init.d, root:root, rwx,rx,r and the first few lines...
#!/bin/sh
# chkconfig: 345 100 25
# description: JBoss App Server
# processname: jboss
[Code]....
I am using RHEL 6.0 OS runnig on an i5 core with H57 chipset. whether there is any support for GMA-HD in the builtin graphics drivers or do I need to add any extra driver for using GMA -HD?
View 1 Replies View RelatedIs there a guide somewhere that covers installing Trac? [URL]That one doesn't cover how to link Trac to Apache with mod_python,configuring authentication, or using htdocs to host static content (like the logo image I want to use. Does tracd support authentication and htdocs?
View 1 Replies View RelatedI need to use my TV as a monitor via DVI.
Using Meerkat 64. Here's some specs:
Code:
Because the Physical ID is 2.1, I'm fairly certain this is the DVI port. Do I need a driver for this to work?
Does CentOS 5.4 support Intel Q45 graphics chip? If it does not support, How do I install the driver manually?
View 1 Replies View RelatedI'm running Ubuntu 10.04 on an Apple iMac 27". After updating yesterday, I no longer have working graphics drivers or a working mouse. The graphics card in question is an ATI HD 5750, and mouse is an Apple bluetooth 'magic' mouse.So far I've managed to fix the mouse, but not the graphics.
At first I didn't have any display at all, but I was able to ssh into the machine and get part way through the proprietry graphics driver installation. The installation failed, but at least I have something displaying on the screen now.I have tried the fix in this thread:[URL]The installation of this completes, however the graphics driver is not working. If I go to Administration > Hardware Drivers, then Ubuntu tells me the ATI driver is in use, but it's clearly not (takes 3 seconds to move a window).I've tried booting into the .24 kernel instead of the .25, but that's even worse since not the mouse doesn't work in .24 (it used to work fine)
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 4 Replies View RelatedI am impressed with 11.4 and am happy that for the first time ever I don't need to install a kernel patch to support my on-board nVidia graphics. However, the on-board sound no longer works now. I don't know how to set it up in phonon. My device number 0 in phonon is MCP72XE/MCP72P/MCP78U/MCP78S high definition audio, and I assume this is my nVidia on-board sound card. The driver information states snd-hda-intel.
How can I check what is wrong with it? It did work fine on 11.2 right up to the 11.4 installation. I do get system sounds (like the start-up and shut-down sounds), but nothing from any application, e.g., firefox playing a video. Based on the advice from another thread I tried: speaker-test -c2 -l5 -twav This does not produce any sound, but gives the following information: speaker-test 1.0.24.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576
[Code]...
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies View RelatedI have a system with two nVidia graphics cards, with monitors connected to each graphics card. I used nvidia-settings to setup a X server for each graphics card. Rebooted with saved xorg.conf file. I do see all monitors displaying their correct image. I am using Gnome 2 supplied with 11.3. The problem is: how do I start applications on the 2nd X server? If I use the application launcher on 2nd X server, the applications appear on the monitors of the 1st X server. I am also unable to move applications windows from one X server to the other.
View 1 Replies View RelatedHad to use ubuntu server edition at my workplace, i cannot get ubuntu graphics screen in my server (Alt+F1, F2, F3, F4, F5, F6 and F7) is there any way to work on ubuntu server graphics screen.
Server Config:
IBM x 3500 Xeon Quad Core
2GB DDR 3
500 GB HDD SATA
I just bought a dual USB2/USB3 external disk for backup purposes on my Ubuntu server box, running 8.0.4 LTS. For various reasons I can't upgrade to the newest LTS yet and I was wondering if there were any plans for USB3 support on Ubuntu Server 8.0.4?
View 4 Replies View RelatedI have been trying to convert our backup web server, Dell PowerEdge 2850, from Windows 2003 to Ubuntu.The box had been hosting a couple of web sites for the past 4 years. It was light stuff, PHP/Joomla on Apache 2 and DotNetNuke on IIS. There was also Apache Tomcat on there. Recently, we also added Subversion and TeamCity for version control plus continuous integration. All of the .NET stuff has been moved over to another server that we acquired. Right now I am trying to get Sun Glassfish 3 and Alfresco WCM to run on Windows on the old server, but it is a major pain in the butt. I could use OpenSolaris, except there are a couple things that are easier in Ubuntu. The box must also be able to run FreeNX properly so that my boss, who is a GUI guy, will be able to log in to a desktop. That leaves Ubuntu, since I am somewhat familiar with it.
I was able to get FreeNX, Glassfish and Alfresco (up to a point) to run using a Turnkey Linux image. The problem is the server is proving to be difficult. I tried starting with the desktop 9.1 CD that I downloaded; however, there is massive graphics corruption on the desktop. It'll boot fine to the Gnome desktop, but the system will become really slow and the windows disappear, leaving just a border. Switching to another VT shows blurry, shaky text. I suspect there is an issue with the graphics driver, but I can't even type in any commands to find out what is going on.
I also downloaded 9.04 Server edition and it installed fine with no shaky text. How hard would it be to build on top of that for XWindows and FreeNX to work? Why is the text shaking in the first place?
I am installing a new large 4 Tb RAID (hardware) under 9.10. Does GPT support come by default in the new 9.10 kernel? How can I check? I gather I need to use PARTED to make a GPT partition table on the raid. Anyone know details of how to do this? [URL]...
View 2 Replies View Relateddoes ubuntu 10.04 support multithread on mysql 32 bit?
View 8 Replies View RelatedIve had my server up and running for a few weeks now, everything has been good. My one small hitch is that while in the console I need to be able to see Chinese Simplified characters. I dont really need to type them, but I do need to be able to read them. How do I go about adding support for simplified chinese?
View 2 Replies View RelatedI'm testing a support ticketing system (osTicket), and am trying to set up the server so it can send and receive messages using an external email account so it will, you know, work.When you try to add an email account, it spits out the error "IMAP doesn't exist. PHP must be compiled with IMAP enabled." in the web interface.So apparently IMAP isn't enabled in PHP. And apparently I have to recompile PHP to add that particular function. Um... how i do that? i not so good with computer
View 1 Replies View Relatedfirst, sorry for my bad english, I am german I have a problem enabling IOMMU on my MSI 970A-G45 mainboard. I need the IOMMU support for PCI passthrough in KVM ( I need my DVB pci cards in the virtual machine).
I have installed Ubuntu server 11.04 and enabled IOMMU in bios. The first strange thing is, that when iommu is enabled in the bios i cant access network or USB devices in ubuntu. Only when its disabled in bios.
Well, i tried the tutorial from here: http://www.linux-kvm.org/page/How_to...th_VT-d_in_KVM and compiled a new kernel with "Support for DMA Remapping Devices", "Enable DMA Remapping Devices" and "PCI Stub driver" enabled and installed it (based on description in wiki)
[Code]...
I'm not having any luck today getting maildrop working. Ubuntu (Hardy) and everything is from aptitude.If I use 2.0.3 (the version aptitude serves up) I get this:
maildrop 2.0.3 Copyright 1998-2005 Double Precision, Inc.
GDBM extensions enabled.
Courier Authentication Library extension enabled.
[code]...
This is after I made maildrop setuid root. It seems that the version aptitude serves us was compiled without the --enable-trusted-users flag at compile time. There appears to be no way around this other than to recompile, according to Sam V, the author of the program. So I'm off to compile my own.
/usr/local/bin/maildrop -v
maildrop 2.4.2 Copyright 1998-2005 Double Precision, Inc.
Maildir quota extension are now always enabled.
This program is distributed under the terms of the GNU General Public
License. See COPYING for additional information.
[code]....
It never talks to mysql and obviously isn't authenticating. The aptitude version does talk to mysql, but can proceed no further because it hits that "trusted user" issue.
Are the authlib & mysql libraries somewhere else? There areHow can I solve this? Have any of you successfully compiled maildrop to work with courier-authlib and mysql? This is driving me nuts. I'm using courier-imap with virtual users in mysql. This setup has worked just fine for a long time, but I now need to add server side filtering. It seems like I'm almost there....
exportfs outputs the following error upon restart or after editing /etc/exports.
Code:
'exportfs: Warning: /exports does not support NFS export.'
here is my info and configs.
[code]....
I'm wanting to setup a file server for home. I'll probably use the following: Ebox, Firefly Media Server, TorrentFlux I'm still not sure about how to go about redundancy for the store, possibly software RAID 5. ZFS would be cool but the linux support through FUSE and large memory requirements are a bit of turn-off. I'm also not sure how to go about supporting TimeMachine on my new Macbook Pro. I've seen a couple of old guides on the web discussing Netatalk and Avahi but noting new.
I'm thinking I'll probably use a spare 2.5" 80GB SATA drive for the OS drive, and then probably 4x2TB HDD (for 6TB of useable storage in RAID 5). I'm not sure about what mobo and cpu to use yet. I was originally thinking to go with an atom based Mini-ITX mobo but to get one with 4x SATA ports is hard enough, let alone trying to get one with 5-6x (1 for OS and 4 for data) so I'm thinking maybe I should get a low power Intel or AMD based Micro-ATX mobo with 6x SATA. I'm also thinking I'll setup CrashPlan for online backup from the server (plus directly from my Macbook Pro and my Desktop).
I acquired an old ML370 Proliant server, and I'm attempting to find a way to control the fan speed, as all three noisy fans are running at full blast, and I had planned to keep this thing in the office, because it has no wireless capability or support.
I know the following:HP has a suite of programs that are variously called Insight Control Manager, Server Health driver, HP-health, hpasm, and a few more I can't remember. Obviously these are different iterations of the same program, but I have been unable to determine which one I need, and I've been completely unable to find a way to install any of them or find the repository that contains them.
The website: Download Drivers and SoftwareIt lists a lot of different Enterprise-class Server OSes, but nothing about Ubuntu or any home server OSes. I've only been at this for a week, so I don't know which of these would work with Ubuntu Server, or how to make them work if their aptitude file extension is not .deb. I'm currently running Server version 10.10, as 11.04 gave me monitor troubles.
I am planning to do a critical installation on a Dell Poweredge T610 server. Has anyone faced any problems installing CentOS on this server.
View 2 Replies View RelatedI am looking to use Citadel in my machine, some questions come to mind before I install it again on my new server.
Can this tool support phpBB sending mail for activations etc?
Can I use CLI mail commands?
I have noted it can support a vast number of domains.