Fedora :: Nvidia Proprietary Module To Get 3D Acceleration

Jun 1, 2010

I am installing the Nvidia proprietary module to get 3D acceleration. The system boots into gnome (fedora 11) nicely. When I go to console init 3 (shutdown X) to install the Nvidia native driver the console is all garbled. the monitor is fully polluted with random alphanumeric characters, different colors, quite pretty actually but cannot get out of it.. The fedora driver is nouveau. GPU is GeForce 8500. I get the same from a fedora dist. (2.6.30-10-105.2.23.fc11.i586) and linux distrbution (2.6.32.13)

View 2 Replies


ADVERTISEMENT

OpenSUSE Hardware :: Switch On 3d Acceleration Without Installing The Proprietary Driver From ATI/AMD?

Jul 26, 2011

I'm using openSuse 11.3 with KDE 4.4.4. My graphics card is an Asus EAH 5450 with an ATI radeon HD 5450 GPU. I'm using the opensource radeon driver. When I open sysinfo:/ in Konqueror, I see the following info:

Vendor: ATI Technologies Inc
Model:
2D driver: radeon
3D driver: swrast (No 3D Acceleration) (7.8.2))

How do I switch on 3d acceleration without installing the proprietary driver from ATI/AMD? I know this must be possible because on another computer, I have also openSuse 11.3 with KDE 4.4.4 and an ATI radeon HD 4350 installed and it has 3d enabled directly after installation of openSuse with the opensource radeon driver.

View 5 Replies View Related

Fedora :: (EE) Jul 30 06:32:07 NVIDIA(0): Failed To Initialize The NVIDIA Kernel Module

Jul 30, 2010

I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:

Code:

(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs

[code]....

Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?

View 2 Replies View Related

Fedora :: Switch To Nvidia Proprietary Graphics?

Oct 3, 2009

How do I use the proprietary graphics for my nvidia card?

I use KDE, and I've installed both kmod-nvidia and akmod-nvidia, and when I went to activate the special affects I ran into problems. I had to use Xrender for it to work at all (and that just went really slow) whereas OpenGL just made my screen go black, with a mouse and window borders if I alt+tabbed.

I reinstalled and only have the default video driver installed (nouveau or something like that) and I'm a bit scared to try prorprietary graphics without a step-by-step guide that works, which I haven't been able to find.

View 3 Replies View Related

Fedora :: Got Font Sizes Right With 14 + KDE + Proprietary Nvidia Drivers?

Dec 22, 2010

If anyone else out there is being driven crazy by the fact that their fonts are too big in KDE (with the proprietary nvidia driver), here's all the places you need to change it to make it work:

In /etc/X11/xorg.conf, under Identifier "Screen0", add:
Option "UseEdidDpi" "FALSE"
Option "DPI" "90x90"

[code]....

View 3 Replies View Related

Fedora :: Set Up Any NVidia Video Card Properly With The Proprietary Drivers ?

Jan 5, 2009

Quote:

NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.

I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.

It's fairly easy, anyone can do this. Read and follow these instructions:

Install all updates. Although it seems unimportant, it really is.

Go to [url] and follow the instructions to install the free and nonfree repositories

Go to System > Administration > Add/Remove Software

Search the following: nv

Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.

Install the drivers by clicking "Apply" at the bottom of your screen.

After installing, go to Applications > System Tools > nVidia Display Settings

Set the properties of your video card, such as TwinView or higher screen resolutions.

After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!

Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.

Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.

Now type:

Code:

Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.

Exit out of the terminal.

Exit out of the nVidia Display Settings application. Do not save anything from this application.

Log out and log back in to see the changes.

If you want to change some settings, repeat steps 7 - 16.

View 3 Replies View Related

Fedora :: Install Nvidia Proprietary In Runlevel 3 - Deactivate Or Unistall Nouveau

Jan 25, 2011

ill try to write in english as well as i can.So, my problem is this:Fedora has Nouveau drivers installed by default, and I want to install nVidia propietary drivers.When i try to install Nvidia propietary in runlevel 3, it says that ive to deactivate or unistall Nouveau.

Ok, i do that, but the next reboot, the tty doesnt work (black screen) and i cant access runlevel 3 correctly and i cant install propietary driver. I have looked this in google and i didnt find nothing, so i ask here.

View 5 Replies View Related

Hardware :: NVIDIA Proprietary Driver - Resolution Changes Not Saved On Restart - Fedora 14

Dec 20, 2010

I recently installed Fedora 14 KDE and NVIDIA proprietary driver for GeForce FX 5200. I'm able to change the resolution to 1920x1080 (Acer H213H 21.5" lcd monitor), but when I restart the box, I lose these settings and I have to fiddle with NVIDIA and KDE monitor settings until I get the settings back.

Here is my xorg.conf file:

Code:

Is this (in)correct? What else can I try in order to keep my resolution at 1920x1080? When I restart, it reverts to 640x480.

I didn't have this problem before installing NVIDIA driver, however, I had visual anomalies and slowness in video refresh/repaint whenever moving windows. I don't want to go back to that so I'd like to see how to permanently propagate my resolution settings through reboots of this box. I've search multiple forums with no relevant hits as far as I was able to discern.

View 7 Replies View Related

Hardware :: No Sound Through Inboard HDMI On Fedora 12 With Proprietary NVIDIA Video Driver

Aug 5, 2010

Under Fedora 12, I have installed the proprietary NVIDIA graphics driver successfully and am now attempting to use the onboard HDMI output. (The board has HDMI and VGA out built in.) I am getting a clear picture on the TV screen, although the edge of the screen output hangs off all edges of the physical screen. The HDMI audio output is being detected, but no sound come out of the TV when I switch the sound output from the Analog Sterio Duplex to HDMI Output in the Sound Preferences. Any suggestions, and what further information is required?

View 9 Replies View Related

Fedora :: Error "Failed To Load Module "nvidia" (module-specific Error,0) No Drivers Available

May 1, 2011

I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.

View 5 Replies View Related

Fedora Installation :: Nvidia Removing Kernel Module

Jun 19, 2009

I had the 180.xxx nvidia drivers on my FC10 setup.I installed the 185.xxx and am running into issues. It gives me the fatal server error: no screens found message. Before that it says that the nvidia kernel module is 180.xxx and the driver component has 185.xxx. I can't seem to figure out how to uninstall the previous module to make this work. I removed the yum kmod nvidia. I'm running this using sh nvidia.185xxx.xxxx.run . The weird thing is that it sometimes would work but then I would restart and it would break again.
Thanks in advance,

View 9 Replies View Related

Fedora :: Unable To Load Kernel Module 'nvidia.ko'

Nov 29, 2009

im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is 2.6.31.5-127.fc12.x86_64...i followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:

-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device

View 11 Replies View Related

Fedora :: F14: Module License 'NVIDIA' Taints Kernel

Nov 5, 2010

Code:

# dmesg | grep nvidia
nvidia: module license 'NVIDIA' taints kernel.

I searched around and found out the kernel accepts only GPL modules, which is pretty dumb. People recommended using rpmfusion's akmods, but that's what I'm using to begin with.

How can I fix this without having to recompile the kernel?

Code:

# uname -r
2.6.35.6-48.fc14.x86_64

View 8 Replies View Related

General :: Get 3D Acceleration With A Nvidia Card Without X?

Mar 2, 2010

I like Linux.

I like OpenGL.

I don't like X.

On Linux, is there anyway to get 3D acceleration from my Nvidia card without X? Ideally, I'd have the kernel boot, get to a console, then somehow get into a "graphics mode", where my entire monitor is just a single OpenGL screen ... and I draw stuff to it with OpenGL. Without X.

View 4 Replies View Related

Fedora :: Updated Kernel / Now Nvidia.ko Module Doesn't Load

Feb 26, 2010

I think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.

View 5 Replies View Related

Ubuntu :: NVidia Graphics Driver - 3D Acceleration?

Jun 20, 2010

I have a nvidia Geforce 8500 on my 10.04 system - the driver I'm using is: NVIDIA accelerated graphics driver (version current) [Recommended]. When I look at System/Preferences/Monitors I am asked if I want to use the vendor's graphics tool and up pops the NVIDIA X Server Settings window. How do I enable 3D acceleration?

View 2 Replies View Related

Ubuntu :: NVIDIA: Failed To Load The NVIDIA Kernel Module?

Aug 31, 2010

I spent quite a lot of time jumping from one thread to another trying to fix a problem with my NVIDIA drivers in Lucid. I was getting the error message on startup: NVIDIA: Failed to load the NVIDIA kernel module ...Failed to load module "nvidia" (module-specific error, 0) No drivers available".

After a lot of trial and error, this is what worked for me (I have updated this thread following [URL]):

- Download the latest NVIDIA driver from www.nvidia.com/page/drivers.html

- In the terminal cd to the directory where you downloaded the driver package (e.g., $ cd Downloads)and make it executable (e.g., $ sudo chmod +x ./NVIDIA-Linux-x86_64-256.53.run)

- Edit blacklist.conf $ gksu gedit /etc/modprobe.d/blacklist.conf

and add the following lines to the end of the file:

#recommended by http://ubuntuforums.org/showthread.php?t=1467074
blacklist vga16fb
blacklist nouveau
blacklist rivafb

[Code].....

View 2 Replies View Related

Ubuntu :: NVIDIA Driver Stopped Working No 3D Acceleration?

Aug 23, 2010

My problem started with the following post.[URL]I ended up tracing the issue back to openGL that disappeared during an update and the nvidia driver had broken. The only remaining issue is that the 3D acceleration on the NVIDIA (GeForce 8600 GT) card will not activateURL]hich I have done many times now. I am now on the nvidia-173 driver as that one seems to be working the best. Even the nvidia-settings is having trouble and crashes when I try to look at the OPENGL/GLX information.I have found many instances of jockey showing that the driver is "active but not in use" which is what I am seeing. The problem is that the 3D acceleration is not working and the issue seems to be the driver.

View 6 Replies View Related

Ubuntu Multimedia :: GLX Video Acceleration With ATI/NVIDIA 3-monitor Setup ?

Jun 25, 2011

I'm currently running a three-monitor setup, two of the monitors being connected to an NVIDIA card, and the third being connected to the motherboard's onboard ATI adapter. This works, and it actually works quite well, but after installing the nvidia-current drivers (using the GNOME dialog), I am unable to get any video acceleration going. The GLX module doesn't seem to want to load, and while I'm actually quite impressed with the video performance I'm getting with the open-source drivers, I'd really like to have the OpenGL capability, as it does make things look prettier.

Relevant configs and logs are below.

I should clarify - I don't care about the 3rd monitor on the ATI adapter; I'm only concerned with getting OpenGL working on the two on the NVIDIA - if that's possible, which it may not be...

System:

Code:

xorg.conf:

Code:

View 3 Replies View Related

Ubuntu :: Nvidia Proprietary Driver ?

May 31, 2011

I did a clean install of Ubuntu 11.04 on my desktop which has a Nvidia GForce 7300LE card. Installation was successful, however, the moment I install Nvidia Current driver the system hangs. The only way I was able to get the system working was by doing a fresh install.

View 4 Replies View Related

Debian Multimedia :: How To Keep Out Proprietary NVIDIA Driver

Feb 20, 2016

Debian Jessie kernel 3.16.0 AMD64. Legacy GeForce 66oo GT video card.

I just re-installed Jessie via Debian non-free DVD. When I run apt-get update && apt-get upgrade, the screen says to the effect :

"Before Nouveau can be used, must remove Nvidia config from xorg.conf and xorg.conf.d"

Is there a simple way to keep Nouveau and blacklist or prevent Nvidia driver from being automatically installed in the first place?

View 6 Replies View Related

Ubuntu :: NVIDIA Proprietary Driver Won't Build On 2.6.32.24?

Sep 1, 2010

I have used the NVidia proprietary drivers for awhile. Yes, I know about nv and I even know about the prepackaged ones, but I've never minded getting the latest from NVidia, dropping out of X, and running the install which automatically rebuilds everything.

I recently took the synaptic update to 2.6.32-24. It worked fine and -- I guess -- migrated my driver. I didn't think about it. For no particular reason today I tried to build the latest NVIDIA driver (256.53 -- had been on an earlier 256 series). The build failed with some conftest failures. Even trying to rebuild the working driver failed. Reverting to 2.6.32-23 allowed both to be built and they work. So something the NVIDIA installer is expecting headerwise must be different between 2.6.32-23 and -24.

View 5 Replies View Related

Ubuntu Multimedia :: 10.10 Nvidia Proprietary Driver No GUI

Nov 23, 2010

Installing Mythbuntu 10.10, which I finally got installed properly. At first I installed the open-source video drivers just to make sure the installation worked, then I installed the "version current" proprietary drivers using the graphics drivers manager...tool...thing. However, when I restarted the computer, it has a text-mode splash screen and I stay in the first virtual terminal.

If I try to go to the GUI "terminal" [Ctrl-Alt-F7], it appears to be partway through some kind of check:

Code:

I ran sudo dpkg-reconfigure xserver-xorg to try to get back to the open-source drivers, but it didn't give any text output and went straight to the next line of command prompt, when I restarted it did the exact same thing. Any tips for at least getting back to the open drivers? I'd like to not have to reinstall again (I'm dual-booting WinXP,). The card in question is a GeForce 6200 AGP.

View 6 Replies View Related

Hardware :: Proprietary Driver With An Nvidia Gt310m?

Apr 16, 2010

I've been getting a little discouraged with my laptop and I've been finding a lot of machines with gt310m graphics. The driver page last I checked didn't list this as being supported by the proprietary driver, I was just wondering if there's anyone that has tried it, and what the results were.

View 1 Replies View Related

Hardware :: Nvidia (with Proprietary Driver) Vs ATI (with Free)

Mar 8, 2011

I currently have an nvidia card (GeForce 8800 GTX) and use the proprietary driver since I game a lot on wine (games like mass effect 2, prince of persia 2008, and some more recent games). I was wondering if using an equivalent ATI card with the free driver would show the same performance as my current on, or if the ATI driver isn't THAT mature yet. Would I be able to play the latest games with it on wine, or am I better of with nvidia and the propietary driver.

(I definitely know nouveau doesn't stand up to it *yet*, i.e., Prince of Persia complains about lack of video features). (note I don't care about a nouveau vs radeon debate, nor for a nvidia vs ati debate, the question is ati+free vs nvidia+propietary).

View 2 Replies View Related

Software :: Have Two Proprietary Nvidia Drivers Installed?

May 13, 2010

I want to run both World of Warcraft and Steam under wine, but WoW won't work with the latest 195.x.x driver, and steam won't work with the previous 185.x.x driver.

Is it possible to have both installed, and to switch between them as needed for different applications? Or will I really have to choose between one or the other?

View 1 Replies View Related

OpenSUSE Hardware :: NVIDIA Proprietary Install - 195.36.08 - Fail ?

Mar 3, 2010

I tried installing the latest NVidia proprietary drivers, but it was epic fail.

OpenSUSE 11.2

It fails with an "unable to compile kernel module" error.

I stupidly overwrote the log file without backing it up. It had a lot of compile warnings, but I didn't see anything that looked like a compile error. I'll try to generate it again.

View 8 Replies View Related

Ubuntu :: Enabling NVidia Proprietary Driver In 10.04 Is Breaking?

May 2, 2010

Everything works great at the moment, no hardware problems or anything like that. But whenever I enable the proprietary nVidia driver 185, it causes the boot screen to not come up, Ubuntu stops recognising my sound-card and refuses to work and when I try to shut down or restart, it just takes me back to the log in screen. When I remove the driver, everything works okay again.

View 3 Replies View Related

Ubuntu :: All Attempts To Install NVIDIA Proprietary Fail?

May 28, 2010

The problem is that Ubuntu 10.04 as delivered is not compatible with the Nvidia driver installed with 10.04. This problem is widely reported, as is a fix for it. The usual form of the fix is as follows:

To fix the above error message use the following procedure
1) Download Newest Nvidia drivers from here
2) Open module blacklist as admin gksudo gedit /etc/modprobe.d/blacklist.conf

[code]...

View 1 Replies View Related

Ubuntu :: Proprietary Nvidia Drivers = Ugly Bootup?

Sep 26, 2010

I'm using an Nvidia Geforce 6x card (can't remember the exact number). When I do not have the proprietary driver enabled, the Ubuntu logo and status bar, as well as various boot up messages, look very nice. They are scaled properly and I'm impressed with how they look. When I do enable the proprietary driver, the screen resolution during boot up is much smaller, and therefore everything looks ugly. The little status bar under the Ubuntu logo suddenly fills up and "freezes." The transition from login screen to desktop is jerky.

Unfortunately if I disable my card, I cannot use desktop effects or even view flash videos in full screen mode. (I'm assuming nouveau still has work to do.) Is there any way I can have proprietary drivers enabled and a nice boot up experience?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved