Ubuntu :: Proprietary Nvidia Drivers = Ugly Bootup?
Sep 26, 2010
I'm using an Nvidia Geforce 6x card (can't remember the exact number). When I do not have the proprietary driver enabled, the Ubuntu logo and status bar, as well as various boot up messages, look very nice. They are scaled properly and I'm impressed with how they look. When I do enable the proprietary driver, the screen resolution during boot up is much smaller, and therefore everything looks ugly. The little status bar under the Ubuntu logo suddenly fills up and "freezes." The transition from login screen to desktop is jerky.
Unfortunately if I disable my card, I cannot use desktop effects or even view flash videos in full screen mode. (I'm assuming nouveau still has work to do.) Is there any way I can have proprietary drivers enabled and a nice boot up experience?
View 2 Replies
ADVERTISEMENT
Jan 9, 2011
It's weird, but when I activate proprietary drivers my Ubuntu splash screen from gorgeous to ugly. For instance without the drivers my splash screen shows Ubuntu and the loading dots into amazing HD quality.However when the drivers are activated the quality becomes ugly, and text start appearing saying loading pulse audio, and other stuff. How can I make it gorgeous again?
View 2 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Jul 13, 2010
I installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?
View 1 Replies
View Related
Jun 9, 2011
After using Arch Linux for a while, I tried Ubuntu 11.04 again. Most of it was a pleasant surprise, except for the nvidia drivers. I currently have the nouveau drivers, but when I activate the nvidia drivers and reboot, it's installed but not in use. I figured I should run nvidia-xconfig (as suggested by nvidia-settings) but that makes my computer boot into a tty. Removing the /etc/X11/xorg.conf file makes it boot in nouveau again.
How do I install the Nvidia drivers? Ive tried the drivers from nvidia.com too, with the same results. I really want to be able to play my games, and nouveau just isnt going to cut it.
View 9 Replies
View Related
May 13, 2010
I want to run both World of Warcraft and Steam under wine, but WoW won't work with the latest 195.x.x driver, and steam won't work with the previous 185.x.x driver.
Is it possible to have both installed, and to switch between them as needed for different applications? Or will I really have to choose between one or the other?
View 1 Replies
View Related
Feb 4, 2010
I had, with much delight, accomplished a dual boot install of Ubuntu 9.1.0 and Windows 7 the other day and everything was working perfectly fine. However, I decided to activate the proprietary Nvidia drivers that were available in the drivers menu and my system subsequently no longer operates. After installing and rebooting Ubuntu will no longer work and becomes stuck on a black screen with two white dashes in the top right had of the screen.
This hang up occurs directly after the first white Ubuntu logo appears during the startup and the only key that will work during this screen are Crtl + Alt + F1, which only bring up a second black screen except with a solid white dash in the top right screen. At that point no key will work. I have tried to fix things in recovery mode and used envyng to remove the nvidia drivers as well as other operations, however the same result still appears when I try and run Ubuntu. I own a Sony Vaio Z690C if it makes any difference.
View 1 Replies
View Related
Dec 22, 2010
If anyone else out there is being driven crazy by the fact that their fonts are too big in KDE (with the proprietary nvidia driver), here's all the places you need to change it to make it work:
In /etc/X11/xorg.conf, under Identifier "Screen0", add:
Option "UseEdidDpi" "FALSE"
Option "DPI" "90x90"
[code]....
View 3 Replies
View Related
Oct 20, 2010
I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !
I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).
View 9 Replies
View Related
Jan 12, 2011
Thought I'd put this together based on what I just did as it's hard to find a place where you get complete info in one place for this topic.
Not taking any credit as it's just piecing together stuff found on the net.
Of course this is for my specific hardware and system so YMMV:
- Palit Sonic GT 240 card
- Lucid 10.04.1 64-bit
- Intel DG33FB board and E7200 CPU
- LG monitor L194WT at 1440x900 res
Reason for choosing the latest NVidia drivers instead of the ones available from the System > Administration > Hardware Drivers option is that the latest ones contain specific fixes for my card, that are not available in the others.
Prerequisites:
All of the following is based on a freshly installed 64-bit Lucid 10.04.1 system. Some actions may need modification if you have already been tinkering with Nvidia drivers.
1. Backup your /etc/X11/xorg.conf file if any. The default clean install of 64-bit Lucid 10.04.1 doesn't create this file so unless you have generated and modified the xorg.conf file for your specific needs, skip this.
2. Install the following packages
Code:
If this doesn't work, run
Code:
And paste the output of that in the command above so you get, say
Code:
3. Remove the following packages using Synaptic's 'Completely Remove' option
- nvidia-173-modaliases
- nvidia-96-modaliases
- nvidia-current-modaliases
- nvidia-common
4. Create a new text file disable-nouveau.conf in the directory /etc/modprobe.d/ with the following contents
Code:
5. Download the latest NVidia drivers applicable to your card from here:[url]
6. Save the downloaded file (e.g. NVIDIA-Linux-x86_64-260.19.29.run in my case) to an easily accessible location like your home folder. Make this file executable by running, say
Code:
7. Check that the driver was correctly downloaded.
Code:
8. Run Update Manager, Check for updates and Apply any found
Installation:
1. Restart and choose the recovery option from the Grub options list.
2. Choose the Root Shell option in the list of options presented subsequently.
3. At the root shell run the following
Code:
If you skip this, the driver installer will inform you of the need to do this.
4. This will present you with a login prompt. Login with your admin username and password.
5. Navigate to the folder where the driver installer is present and run it, like
Code:
6. Accept the license text.
7. Say Yes to installing the 32-bit Open GL drivers.
8. I think you need to say Yes/ Accept once more time to initiate the driver installation.
9. Once the driver is installed it will ask you whether it should configure xorg.conf for you, say Yes. This will create the xorg.conf file if not present in your system and modify an existing one if present.
10. Back at the prompt, shutdown the system
Code:
11. Restart and use the normal startup option in the Grub options list, if all goes well you should see your beautiful desktop.
View 1 Replies
View Related
Jul 17, 2011
As this question pops up quite often on IRC and, as a quick search told me, on this board as well, I decided to put together some directions that, with some or the other variation, also apply to other Linux distributions and have never failed me. The following is confirmed to work for Kubuntu 11.04 Natty Narwhal 64bit with a NVIDIA GeForce GT 240 and on Kubuntu 11.04 Natty Narwhal 32bit with a NVIDIA GeForce FX 5900XT graphics card.
This HowTo will describe how to install the proprietary NVIDIA graphics card drivers using exclusively the command line. I strongly suggest you try this method for a fresh install of graphics drivers before trying any other method, especially a GUI-driven one (I never used a GUI for package management on a Debian-ish system, but I hear that the Ubuntu Software Center supposedly has a way of installing proprietary graphics drivers).
The restricted packages repository should be enabled by default. To the more experienced users: This HowTo uses apt-get for demonstrating the install process. If you prefer using aptitude, feel free to replace the commands accordingly. First steps. As well be doing everything on the command line, first open a terminal application from your desktop environments menu or from a shortcut icon on your panel, if you have one. You should be greeted by a prompt that looks like this:
[Code]...
View 7 Replies
View Related
Jan 5, 2009
Quote:
NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.
I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.
It's fairly easy, anyone can do this. Read and follow these instructions:
Install all updates. Although it seems unimportant, it really is.
Go to [url] and follow the instructions to install the free and nonfree repositories
Go to System > Administration > Add/Remove Software
Search the following: nv
Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.
Install the drivers by clicking "Apply" at the bottom of your screen.
After installing, go to Applications > System Tools > nVidia Display Settings
Set the properties of your video card, such as TwinView or higher screen resolutions.
After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!
Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.
Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.
Now type:
Code:
Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.
Exit out of the terminal.
Exit out of the nVidia Display Settings application. Do not save anything from this application.
Log out and log back in to see the changes.
If you want to change some settings, repeat steps 7 - 16.
View 3 Replies
View Related
Jul 26, 2010
I have an nVidia GeForce 7600GS with a dual monitor setup. A 19" Dell @ 1280x1024, and a 19" widescreen Acer @ 1440x900. The Dell is attached via DVI, and the resolution is detected properly, and set, but the Acer is connected via VGA, and so the native resolution is unkown to the nvidia control panel. It will only let me set the resolution up to 1024x768. I had it create the xorg.conf file, and i tried to edit it manually, changing its
[Code]...
View 9 Replies
View Related
Aug 26, 2011
I've recently jump from the Ubuntu/Mint ship, and figured I've give a polished KDE distribution a shot. Of course I turned to OpenSuSE, and I love it so far. I've resisted KDE quite a lot since 4.x came out but it's really come along. Much better than the (in my opinion) monstrous disaster that Gnome has become.
Anyways, on to my problem: I've installed the proprietary Nvidia drivers via the one-click-install shown in the wiki, and that worked great. But now my resolution at boot - that is the boot/loading screen, not my desktop - is shown at a very low resolution instead of my native resolution, like it was with OpenSuSE's default open-source Nvidia driver, which I'm guessing is Nouveau. On Ubuntu, this was pretty easy to correct; all you had to do was edit /etc/default/grub and put your resolution there, and tinker with some other options so that instead of Plymouth trying to set its own, it just carries over Grub's specified resolution. But I can't seem to do that with OpenSuSE. For one, I don't see /etc/default/grub, and more than that, I don't think you guys use Plymouth. I could be wrong on that second point, though. So, how can I change the boot screen's resolution to my native resolution? I'm using the latest Stable release (11.4) and latest Nvidia drivers. Other than that, the install is new.
View 5 Replies
View Related
Apr 5, 2011
My GNOME system stopped using the proprietary NVIDIA drivers after the recent dist-upgrade to v6.0.1. It was working perferctly before that.
My inxi output:
inxi -F
System: Host thirra-ws1 Kernel 2.6.32-5-686 i686 (32 bit) Distro Debian GNU/Linux squeeze/sid
CPU: Dual core Intel Core2 Duo E7500 (SMP) cache 3072 KB flags (sse3 nx lm vmx) bmips 11703.9
[Code].....
When I tried to configure the screen resolution using NVIDIA X server settings, I was told to run 'nvidia-xconfig'. I ran it, restarted X but my resolution is still stuck at the maximum of 1024x768. I've tried running the above many times with the same results. I even tried aptitude reinstalling but still the same.
View 11 Replies
View Related
Mar 15, 2011
I have openSUSE 11.4 with standard KDE and two screens attached.Here's the question: How do I configure dual monitors when using the proprietary nVidia drivers?The openSUSE 11.4 installation put in the "nouveau" drivers for my nVidia card and I was able to configure dual monitors using KDE's Configure Desktop --> Display & Monitors GUI configurator. I could also set up dual monitors using a script based on xrandr (e.g. "xrandr --output VGA-1 --auto --pos 0x0 --output DVI-I-1 --auto --pos 1920x0")My screens are detected as VGA-1 and DVI-I-1 by the nouveau drivers.
OK, today I switched to the proprietary nVidia drivers. Only one of the screens is now detected and displayed in the KDE monitor configurator and that's marked as "default" rather than as a VGA or DVI connection.When I run xrandr to configure monitors, I get error messages if I refer to VGA or DVI hardware.
More info -- RPMs
nvidia-gfxG02-kmp-desktop-260.19.36_k2.6.37.1_1.2-23.1.x86_64
x11-video-nvidiaG02-260.19.36-24.1.x86_64
[code]....
View 7 Replies
View Related
Apr 17, 2010
I am currently running Ubuntu 9.10 on a Compaq Presario V3010US. My video card is an NVIDIA GeForce Go 6150 which appears to be running properly with some limitations (missing effects from CompizConfig). While utilizing the "Hardware Drivers" configuration a recommended driver is listed but when I attempt to activate this driver I encounter an error.
This error turns my attention to the log file :
This log file is extensive and I do not wish to post pages of code unless requested. The configuration does however list that "a different driver is in use". I have scoured threads to ensure that I have not posted a question that has been answered to no avail. Please bear in mind that I am in my Linux infancy and my grasp of this incredible operating system is cursory at best.
View 9 Replies
View Related
Nov 18, 2010
I just received my laptop this week and have been tweaking my laptop to acquire more stability. I just installed the NVIDIA proprietary drivers for the NVS 3100M chipset and I have a residual windows that wont disappear even after reboot. Even after reinstalling the NVIDIA driver it stays. Is there some way to flush the framebuffer?
View 8 Replies
View Related
May 4, 2010
My home desktop computer upgraded to Ubuntu Lucid Lynx 10.04 without any problems. However, after all was said and done, the boot up and shut down screens look like crap. They are all in terminal text, and without any graphics. I have attached pictures of what they look like. This can't be right. Is there a way I can set the system to use the proper graphics when booting up and shutting down? I like my computer to be pretty.
This is what it does for most of the boot process:
boot1.jpg
It does this just before the screen where I enter my password.
boot2.jpg
This is how it looks when it shuts down:
shutdown.jpg
View 9 Replies
View Related
May 8, 2010
I know i know, some will say "eww Proprietary Drivers" but hey, ubunt is all about having more control of the OS. Is there an easy way to install Proprietary Drivers thats not through the hardware drivers option on system?
View 2 Replies
View Related
Oct 15, 2010
I've tried the 'current' proprietary Nvidia drivers in the repository and also the newest from Nvidias home page. Both of them gives me, regardless of what theme I choose, ugly windows. The only things that are shown correct according to the theme is the minimise, maximise, close buttons (correct colour and form). Everything else is grey and ugly. I have successfully activated 'Normal' visual effects, so composite/opengl seems to work.The only window that is according to the theme is System/Preferences/Appearance!?
View 9 Replies
View Related
Mar 1, 2011
Is there a way I can get the clean screen back for when I enter the encryption password during boot? It was quite clean and nice before the drivers but now it just looks awful
View 3 Replies
View Related
Feb 20, 2010
I just installed Ubuntu today and when I go to Hardware Drivers it tells me that there are no proprietary drivers on this system and doesn't show any for me to activate. Oddly enough when I was running the live CD of Ubuntu I got a list of a few drivers to activate, namely the Broadcom STA Wireless Driver and the NVIDIA Accelerated Graphics Driver (version 185).
View 9 Replies
View Related
May 2, 2010
I just built a new HTPC and decided to give Ubuntu a whirl again. I downloaded and installed 10.04, and set about configuring it. Everything looked great, except my audio over HDMI didn't work. I enabled the proprietary ATI drivers, and bam! the audio works! Great. Only one problem: there's a two inch border around my TV (not there with the open source drivers), and Boxee flashes colors rather than playing videos (a known bug. It's fixed by not using the ATI proprietary drivers). So, I disabled the drivers, rebooted, and the Boxee video works, the border/gap is gone, but once again the audio doesn't work. I've been through all the sound settings, and I have everything set to the HDMI output, but still nothing. I've tried various fixes I've found through googling
View 4 Replies
View Related
Jun 12, 2010
I am using Ubuntu 10.04 and unable to connect to the internet. I went to System > Administration > Hardware Drivers and a window popped-up: "No proprietary drivers are in use on this system". So I selected the "NVIDIA accelerated graphics driver (version current) [RECOMMENDED]". But when I try to "Activate" I get this following error:
"failed to fetch [URL] temporary failure resolving 'us.archive.ubuntu.com"
View 1 Replies
View Related
Oct 3, 2010
I'm experiencing video lag in games. I'm using 10.04 lts 32 bit and the latest version of proprietary drivers. For example I play hon and so and then it freezes for a small period of time which is frustrating.
I don't understand, my specs are:
Under this specs it should run perfectly. What's the matter? Ati drivers have poor support under linux? I tried updating to 10.10 and nothing. I tried contacting customer supporot amd but they can't help me. Nice isn't it?
View 6 Replies
View Related
Nov 24, 2010
When I run the liveCD (which I'm on right now), it shows proprietary drivers for my wireless hardware. I installed 10.04 from the liveCD onto my laptop, and after the install, it says there aren't any drivers. Is there a way I can pull the drivers from the liveCD, or should I try a reinstall?
View 1 Replies
View Related
Jul 13, 2011
I recently bought a new PC and it has an AMD GPU. I've been using Catalyst because the open source radeon driver gave me poor performance in games (maybe by 12.04 I can use it ).I've had some updates show up recently. This brings me to wonder if I have anything at all to worry about. This is a production machine and I don't want to muck around with fixing issues brought on by my usual apt-get upgrade.Currently, I've been avoiding updating a few packages related to the Kernel and Xorg:
Code:
The following packages have been kept back:
linux-generic linux-headers-generic linux-image-generic
The following packages will be upgraded:
linux-libc-dev xserver-xorg-video-ati xserver-xorg-video-radeon
3 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.I had an NVIDIA issue back on Ubuntu 8.04 after updating once, due to a kernel update. I had to revert to an older kernel and mess around a bit to fix my installation. I don't have any experience with Catalyst. Basically, I want input as to whether or not it's dangerous to update this sort of stuff. I don't want to mess around fixing issues caused by a rogue update
Ubuntu 11.04 64 bit
AMD Radeon HD 6450
Latest proprietary driver available from Jockey.
View 1 Replies
View Related
Mar 1, 2011
I've been trying to install the proprietary ATI drivers from the .run file from their site as per this link [URL]
I can follow the steps perfectly until step 16, at which I am informed that the command aticonfig is not found.
I have a Mobility Radeon HD 5470 graphics card.
View 3 Replies
View Related
Mar 25, 2011
How do I install the proprietary drivers for an ASUS 901?
Im running wine and stuff that ran at full settings on my damn windows 98 computer are slow as balls. So I checked into drivers and it says I dont have any proprietary drivers installed and it didnt see any.
View 1 Replies
View Related
