Fedora :: Nikon Camera Is Not Mountable?
Sep 9, 2010
I have a compact-flash card that has some corruptions. I woiuld like to try to fix this by copying out the data from the flashcard using ddrescue or something and then trying to fix the filesystem outside the flash.
BUT Fedora does not allow me to really mount / make a block device of the usb-device, so I can not use ddrescue to copy out the disk-image.
Why is my Nikon camera not a block device, and then the other "GUI-applications" triggered on that device in stead?
View 5 Replies
ADVERTISEMENT
Nov 20, 2010
Would like to download photos from my Nikon Coolpix camera.
View 3 Replies
View Related
May 27, 2010
What software do you use for processing RAW photographs? When I had Nikon D40 and Lightzone was free of charge for linux, I used it and really liked that piece of software. Then they've gone commercial for linux. Worst still, My relatively new Nikon D5000's colour profiles are not yet supported by the latest release, which made me abandon LightZone.
Since then I haven't found any piece of software that I'd be comfortable with. A trial version of Bibble 5 was very good, but it wouldn't install on my multilib slackware64 (It was ok on Slackware13 32-bit). Besides it's rather pricey. Is there any linux software that you're really happy with when it comes to RAW processing?
View 3 Replies
View Related
May 19, 2010
I just bought a new Nikon S570 digital camera and I was trying to mount the camera via the USB cable in order to get the pictures off of it but either a) I don't know how to mount the camera properly or b) there is some sort of compability or program that I need to install in order to get it to work. According to lsusb it the camera shows up as being connected:
Code:
Bus 004 Device 003: ID 05ac:8213 Apple, Inc.
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 05ac:0236 Apple, Inc.
Bus 003 Device 002: ID 05ac:8242 Apple, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 04b0:0319 Nikon Corp.
Bus 002 Device 003: ID 05ac:8403 Apple, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ac:8507 Apple, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
So maybe i just need to know how to mount it so I can access the files?
Also, I tried to plug the SD card into the built in card reader but it never showed up either. Do I need to do anything different to get the SD card to mount too?
View 1 Replies
View Related
Jul 17, 2011
I was looking to iphone and i was surprised the quality of such tiny camera.
Is there any alternative camera for my laptop to have similar or much better then the one in iphone? So that i can use it from my laptop, but have very sharp HD quality with maximum megapixel + highest frame per second.
View 1 Replies
View Related
Apr 27, 2010
Can anyone tell me what is the best program on Ubuntu that will download picture files in Raw format from my Nikon D3000 and correct them, and do the usual stuff to make a colour-balanced, photo that can be saved in another format - say Tiff?
View 4 Replies
View Related
Sep 2, 2011
I have a problem with my hard disk...this HHD had no OS just data in some linux file system....i tired to plug it in a windows OS and backup the files....but now the HHD file systems shows RAW. Now when i plug in fedora 15 OS the HHD is not mountable. I tried to # grub-install /dev/dbc1 but it give me an error. error "Bios driver not found" What can i do to restore my file system so i can recover my data?
View 2 Replies
View Related
May 6, 2011
After I upgraded from Lenny to Squeeze, Thunar (in Xfce4) can't seem to detect when a CD is placed in the CD-ROM drive. When I put a USB in the USB port, Thunar adds an icon to the desktop, but with data CDs this isn't happening, and I must mount them from the terminal. However, CDs made from an ISO, for example, my Debian install CD, are detected and appear on the desktop.
View 1 Replies
View Related
Dec 17, 2010
i booted up this morning and got a surprise. when i plug in a usb drive normally, it pops up in the k message box, and i can choose too mount it. then it mounts no problem.
when i turned on the computer today, however, i plugged in my usb drive, and clicked to mount it, and lo and behold, i got a strange message:
'Could not mount the following device: USB 8GB'
when i choose more information, i get this:
Code:
org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.12" (uid=8691 pid=2415 comm="kdeinit4: plasma-desktop [kdeinit]) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=1887 comm="/usr/sbin/hald))
im not entirely sure what this means. i can mount the drive manually through the terminal if it's running as root, but thats not a particularly practical way to do things, as i am a student and often have to switch USB drives and ipods many times a day.
View 7 Replies
View Related
Jan 4, 2010
I can't get Ubuntu to mount my Sony DRU540A, no matter what I do. Audio CDs, Data CDs and burning are impossible, does anybody have any ideas on how to mount this unmountable drive? It worked well enough to install Jaunty Jackalope, and I never had any problems using this drive with windows xp, but now that I've upgraded Karmic Koala it doesn't seem to work no matter what I try.
View 4 Replies
View Related
Jun 11, 2010
I've upgraded to the new 10.04, and when I have the Alternate CD in, it shows on my desktop, and I can search all the contents of the CD, so I know it's registering. But when I try to install anything, via the terminal, .deb packages, synaptics package manager, it always asks me to insert the CD. Then I click ok and it says it's not mountable, even though I know it is because it's on my desktop.
View 3 Replies
View Related
Mar 5, 2010
I have attached an external USB disk to my debian gnu/linux system. The disk showed up as device /dev/sdc, and I prepared it like this:created a single partition withfdisk /dev/sdc (and some more commands in the interactive session that follows)formatted the partition withmkfs.msdos /dev/sdc1If I then attach the USB disk to a Windows XP or Vista system, then no new drive becomes available. The disk and its partition show up fine in the disk managment tool under "computer management", but apparently the file system in the partition is not recognized.How do I create a FAT32 file system which can actually be used in windows?edit:I've given up on this and went with a NTFS file system created by windows. In debian lenny this can be mounted read-write but apparently it requires you to install the "ntfs-3g" package and explicitly pass the -t ntfs-3g option to the mount command.
View 2 Replies
View Related
Jan 7, 2010
I currently am setting up an htpc running Karmic. The problem I am having is getting my Raid 0 to be mountable. My raid is not my boot partition, but is for data storage. My setup is a zotac motherboard with three sata connectors. I have a 300 GB drive, my eSata port, and my DVD attached to these. In the PCIe expansion slot I have installed Syba 2 port Sata PCIe 1a card using the Sil3132 sata II host chipset. Off of this I have 2 1.5Tib Hdds that I am setting up as Raid 0. During the boot I enter the chipset BIOS and establish this as a Raid 0.
When I install Karmic it sees the Raid and my 300 GB drive so I install to the 300 GB Drive and everything works fine. I am able to boot to the Hdd and run the OS. I then installed GParted and setup a partition on my RAID as GPT since I want one large partition of 2.78Tib. I then Format it through GParted as ext4 and I am able to mount and access it. I then reboot the system, and can no longer mount the filesystem. What I found interesting is If I reopen GParted I can then mount it. I traced it down to the fact that the until I access GParted the Block Special Device (sil_bgabagabaedd1) does not appear in /dev/mapper. Everytime I reboot I need to go into GParted to restore the Block Special Device then it is mounted. I think I am missing something in the raid setup as to why it is not being retained. What have I missed? What do I need to do to retain the Block Special Device? Is there a boot config setting?
Edit: I did further research and found that if I do kpartx it will appear just as gparted, but on reboot vanishes. I found something similar at this thread but not comfortable in updating dmraid: [URL] I think it is related to gpt and I will try to use a smaller partition to see if the behavior changes.
View 1 Replies
View Related
Jan 22, 2011
i have a cryptsetup container, which after freshly setting up the computer isn't mountable anymore. Google didnt help me much soSince i use a keyfile, it cant be the passphrase.This is what i do:Quote:
losetup /dev/loop0 /home/data.img
cryptsetup -d super-secret-key.file data /dev/loop0
mount /dev/mapper/data /data
[code]....
View 4 Replies
View Related
Jan 30, 2011
I have the ndiswrapper util installed on my computer, however, I have been unable to install the corresponding driver from the provided cd. I have a WNA 1100 wireless adapter. I have not been able to locate a mountable .inf file on the cd. Only a "setupt.exe" or a trans.tbl file.
View 2 Replies
View Related
Oct 5, 2010
I'm familiar with the software and hierarchy of the mount command but I can't find any info on why it is needed or preferred. What are the physical aspects of it? What is the burden of having files accessible all the time?
View 14 Replies
View Related
Sep 22, 2010
I have a couple of directories that I want to turn into an image. For example:
Quote:
/usr/dir1
/usr/dir2
I want to end up with two imgs (dir1.img and dir2.img). I wanna be able to type in:
Quote:
mkdir /usr/dir1
mount dir1.img /usr/dir1
How can I do that? If I can't use mount than what should I use?
View 3 Replies
View Related
Nov 22, 2010
I want to know How to find mountable devices and their device files in Linux.
View 4 Replies
View Related
Jul 3, 2011
I am using Safesync from Trendmicro to backup my data. Since some time I am experiencing heavy problems. Normally my Backup should look like this: But when I am mounting it with WebDAV, it is looking different:
Code:
cdrewing@christian-desktop:~$ sudo mount -t davfs http://dav.trendmicro.safesync.com /media/Safesync
[sudo] password for cdrewing:
Gib bitte den Benutzernamen f�r den Server http://dav.trendmicro.safesync.com an; wenn du keinen angeben willst, dr�cke Return.
[Code]...
Note: When I am mounting Safesync with Nautilus, everything is functional and ok. But I need my command line access because I want to use rsync. A workaround could be to access the resource via the nautilus mount. Where can I find this via the command line?
View 1 Replies
View Related
Sep 4, 2011
I'm using fedora 15 on my HP G42 laptop, I didn't install any particular packages for access web camera.Does the default OS support access web camera or Do I need to install any software package for that?
View 1 Replies
View Related
Oct 12, 2009
Is there un-delete software for Fedora? On my windows computer I have a program for un-deleting camera photos, it comes in handy for un-deleting the photos that my girlfriend makes me delete.
View 5 Replies
View Related
Jul 14, 2011
My previous laptop died (HD failure, etc.) so I just put F15/LXDE on a Dell Latitude D610. All updates applied. I inserted my Canon Powershot A480 in a USB port, but o/s doesn't seem to react. No desktop icon, no FileManager presence, nothing in /media folder. Other USB devices are detected, mounted and recognized (external HD, memory stick, etc.), but not the camera. what I should do to get the camera recognized?
Edit: DigiKam and Digikam libs are installed and system was rebooted. Still no camera detection.
View 1 Replies
View Related
Mar 2, 2009
I have a lenovo 7757 model which has an inbuilt camera. I have FC9 working on it. However I cannot use the camera. How do I enable it? If someone could point me to a driver if it needs to be installed.
View 6 Replies
View Related
Jun 11, 2010
Finally got around to dual-booting and all was going well. I was surprised to see that the webcam on my Vaio worked straight away. However, some time between one boot and another the webcam mysteriously stopped working..
Here is the last time it worked:
Jun 6 23:12:51 dillinga kernel: uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1837)
Jun 6 23:12:51 dillinga kernel: input: UVC Camera (05ca:1837) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input12
Then the next boot:
Jun 6 23:41:48 dillinga kernel: uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1837)
Jun 6 23:41:48 dillinga kernel: uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
Jun 6 23:41:48 dillinga kernel: uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[code]....
So I decided to boot into windows and make sure all was OK - and it was. Then I came back into Fedora and suddenly the camera was working again! I thought I'd reboot just to see if anything changed and alas here I am again with no webcam and the same error.
View 8 Replies
View Related
Feb 28, 2010
I had my Canon DV camcorder working well with Kino for capture in Fedora 11. I upgraded to F12 recently and tried to capture some video tonight. It does not seem to even recognize my camera.My card: 02:08.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 04)My kernel: 2.6.31.12-174.2.22.fc12.i686.PAEI read somewhere about installing ieee1394 kernel modules from ATRPMs and rebuilding the kernel but
View 1 Replies
View Related
Mar 24, 2010
When I plug in my digital camera (Canon Elph) it shows up in Nautilus, however I'm trying to write a script that will work from the command line. I don't see the camera in the /media folder, nor do I see it in /mnt. When I browse to it through nautilus it shows up as "gphoto2://[usb:001,008]/" with the "008" changing each time. how do I see my files through bash?
View 1 Replies
View Related
Oct 14, 2010
I have a Linux-based PC, running Fedora 13, and am attempting to upload photos from my Soncy Cyber-Shot DSC-W310 digital camera. When I insert the CD that came with my camera, I get the following error message:
Archive: /media/SONYPMB/Install.exe
[/media/SONYPMB/Install.exe]
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive.
zipinfo: cannot find zipfile directory in one of /media/SONYPMB/Install.exe or
/media/SONYPMB/Install.exe.zip, and cannot find /media/SONYPMB/Install.exe.ZIP, period.
I spoke with your tech support person, and he indicated that I could press menu, and go to setting and select PictBridge on the USB option, but that does not work either.
View 5 Replies
View Related
Nov 4, 2010
I have a Nikon Cool Pix 990 camera which I could access under Fedora 11 (and previous) using digikam and/or gphoto2. However under F12 and F13 it no longer works. When plugged in I get a Nikon Camera icon that the system thinks is a usbfs. However the camera is too old for that interface. If I unmount the device then it shows under usb-devices as having Driver=(none). How can I get it to be recognised as a non-usbfs device ?
View 2 Replies
View Related
Jan 23, 2010
When I may find source code for OV2640 web camera driver?
View 1 Replies
View Related
Sep 29, 2010
I have tried putting the SDHC card in before switching on laptop, after, unmounting and remounting several times... on the odd occasion (1/10?) it reads fine, but more often than not, i can see thumbnails of all the images but on opening the file it comes out wrong...either most of the image is a grey block - so can see a tiny bit of sky then its as if it hasn't rendered the whole image...or, the image is striped horizontally, with as if a film negative has been shredded and then misaligned with the colours going wrong...is there an update, something to install to fix this? ETA: - its not the card which works perfect on other laptops and its not the card reader it opens fine in windows 7 on the same computer.
View 10 Replies
View Related
