Fedora Networking :: Root Can Not Bind Socket On Lower Ports (<1024)?
May 9, 2010
I am encountering a wierd problem in FC12. When I try to lunch a program that listens to a lower port such as 80 or any one that is less than 1024, I always get "Permission denied" error message (I am running it as root!).Then I try starting httpd service daemon that listens to 80, no errors, the daemon started and listend to 80.PS: I checked selinux, it has been disabled.Do you have any knowledge on this case? BTW, the kernel version is:2.6.31.5-127.fc12.i686.PAE #1 SMP Sat Nov 7 21:25:57 EST 2009 i686 i686 i386 GNU/Linux
View 5 Replies
ADVERTISEMENT
Aug 2, 2011
Have a program, erlang, that needs to bind to a port lower than 1024, as a non-root user. How do you allow that on a system?
View 1 Replies
View Related
Oct 24, 2010
My understanding is SELinux adds type enforcement to standard Linux. This means that both the standard Linux and enhanced SELinux access controls must be satisfied to access an object. Which means that thing that is prevented to do in the normal standard Linux will be also prevented in the SELinux System? Does SELinux make it possible to run a non-root software to bind to a port < 1024? something that standard Linux won't allow? If not, what other suggestions do you have for allowing a program to run as non-root but able to bind to privileged ports? I know all about using the port re-direction such as ipchains, iptables.
View 4 Replies
View Related
Feb 23, 2009
I am currently trying to get a B.A.T.M.A.N mesh network up and running. the thing uses UDP port 4305 for broadcasting to nearby nodes and it seems this port is closed or used by something else.
now i have tried to open this port with commands like
Code:
iptables -A INPUT -p udp --dport 4305 -j ACCEPT
iptables -A OUTPUT -p udp --dport 4305 -j ACCEPT
it still gives me the same error saying the socket cannot connect.any way for me to scan that udp port, see what is blocking it and open the thing up ?
View 4 Replies
View Related
Jul 26, 2010
If I open a raw SCTP socket, am I able to bind to a specific port? (I only want to see SCTP packets from a particular IP address AND port.) Or, any raw SCTP socket, regardless of port binding , will get all SCTP packets received by the OS from that IP address? The port doesn't matter and is ignored.
View 1 Replies
View Related
May 4, 2011
I finally got the certs to configure:
openvpn --config server.conf
Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010
Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key
Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1
Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened
Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100
Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500
Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072]
Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194
Tue May 3 17:26:27 2011 UDPv4 link remote: [undef]
Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256
Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62
Tue May 3 17:26:27 2011 IFCONFIG POOL LIST
Tue May 3 17:26:27 2011 Initialization Sequence Completed
But openvpn still won't start; where to go from here.
Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use
Tue May 3 17:54:25 2011 Exiting
View 3 Replies
View Related
Feb 23, 2011
I did check the manpath and the files located there.just seems that some pages are missing.
View 8 Replies
View Related
Oct 23, 2010
I'm trying to list all ports less then 1024 on my current machine which are open in the listening state, one port per line
View 1 Replies
View Related
Feb 1, 2011
I'm simply trying to make a little restriction on www packets under two rules:
1. Allow inbound/outbound www packets (works!)
2. DROP inbound traffic to port 80 from source ports less than 1024. (DOES NOT WORK!)
Now, technically, when i use hping to test my rules, hping3 192.168.100.100 -S -p80 -s 1023 I should NOT receive any packets. However, i still receive packets, which means my rule that says less than 1024 does not work. (see below)
And this is my iptables rules in shell-script so far:
#!/bin/sh
DEFAULT_NIC=eth0
SERVER_IP="192.168.100.100"
ALLOWED_WWW_PORT=80
IPT="/sbin/iptables"
[Code].....
View 1 Replies
View Related
Oct 20, 2010
How does bind system call names a socket.Code:bind(server_sockfd, (struct sockaddr *)&server_address, server_len);I see use of bind in majority of programms as above.But any of the arguments is not the name of socket.
View 1 Replies
View Related
Sep 26, 2010
I am trying to create a socket to listen for a bootp response so I am using a PF_PACKET socket so that I get the response based on my mac. My problem is that I don't want to hear all traffic (as I do now) so would like to use a specific port number and bind to it.
View 1 Replies
View Related
Jun 26, 2011
I am learning network prgramming in linux in c,and try to build a server and in this server I want to bind the listening socket to a paricular Ip address and port.Bind function is showing error,I did not want to use wild card. Here is the code.
#include<stdio.h>
#include<sys/socket.h>
#include<strings.h>
#include<netinet/in.h>
#include<arpa/inet.h>
#include<string.h>
[Code]...
View 2 Replies
View Related
May 3, 2011
In user mode [non-root] linux machine, tried to bind a socket by using a"ioctl(iInterfaceSocket, SIOCSIFADDR, &stCommand)". I am getting error 13 -> Permission denied because of user mode. If change from usermode to kernel mode everything works fine.I need to bind the socket in user mode only, please suggest solution for the abovewhile explaining the above,
View 2 Replies
View Related
Jun 4, 2010
I want to configure socket timer to release socket(port) once the connection is terminated. Do we have something in Linux OS to configure this delay to release socket?.
Any command, link or man-page anything will be helpful.
I browsed a lot but unable to find it.
View 1 Replies
View Related
May 5, 2009
I had installed Fedora 10
Below is the output of uname -a
Linux 2.6.27.5-117.fc10.i686.PAE #1 SMP Tue Nov 18 12:08:10 EST 2008 i686 i686 i386 GNU/Linux
I need to enable telnet service on it, then found xinetd and telnet-server not installed,
Then I had installed below
First I had installed Xinetd: xinetd-2.3.14-21.fc10.i386.rpm
then I had installed telnet-server: xinetd-2.3.14-21.fc10.i386.rpm
After installation I executed below commands
Service xinetd start
Chkconfig xinetd on
Chkconfig telnet on
Service iptables stop
Chkconfig iptables off
Iptables �F
After I had tried telnet localhost ----IT FAILED
when I run telnet server manually by issuing the below command
/usr/sbin/in.telnetd, I get below error
[COLOR="Red"]/usr/sbin/in.telnetd: getpeername: Socket operation on non-socket[/COLOR]
I have other system running same OS, I had followed the same steps discussed above to enable telnet, It works fine on it.
View 1 Replies
View Related
Sep 3, 2009
I am configuring bind9 on fedora 9(sulphur).I have configured /etc/named.conf and created zone file in /var/named/I have started the service but when I am executing the command nslookup mydomain.com it is not able to resolve the name.Another problem I am facing when I do telnet localhost 53,I am able to connect.but when I do telnet myip 53 it does not connect.Seems to be a firewall problem but I ve disabled iptables selinux completely even I ve disabled dnsmasq but still not working.
View 1 Replies
View Related
Oct 17, 2010
I tried removing it and installing again but I still get the same code in the terminal:
[Code]....
View 3 Replies
View Related
Aug 16, 2010
I am running vsftp on one of my systems and when trying to connect to it it errors out with this: vendion@Loki:~> ftp 192.168.1.100 Connected to 192.168.1.100. 500 OOPS: could not bind listening IPv6 socket
I have tried stopping the firewall and even disabling IPv6 nothing changed, any clues as to what is going on?
View 5 Replies
View Related
Jun 17, 2010
I am using haproxy for the first time. I downloaded the latest version 1.4.7 and then unpacked it.then opened the terminal and wrote the command $make -f Makefile.bsd REGEX=pcre DEBUG= COPTS.generic="-Os -fomit-frame-pointer -mgnu" After which an executable haproxy file was created which I copied to /usr/local/sbin.
then i wrote $sudo make install then I make a configuration file in /etc/haproxy.cfg which is as follows
[Code]....
But it's not working it is various kind of errors intially it was showing "cannot bind to socket" so tried changing the port number but didn't help I also used command like $sudo sysctl net.ipv4.ip_nonlocal_bind=1
View 4 Replies
View Related
Jan 31, 2010
I am pragmatically trying to upload a list of files from my client machine to a proFTPd server I have running on Ubuntu. Every time I get several (around fifty) files into the transfer, I get the following error: Quote: Connection reset by peer: socket write error
I am able to remotely upload 25,000 small files of ~ 1K in size, but when I go to upload hundreds of 2-4 Mb files, I get a socket write error. Am I using up all available sockets before they can be released? If so, how do I release the sockets? If not, what does this error mean and why am I getting it?
View 1 Replies
View Related
Jun 23, 2011
i want bind mountd on two different porti m working on /etc/sysconfig/nfsi have tried MOUNTD_PORT= but it's usefull for bind only one port, with RPCMOUNTDOPTS= and the switch -t 2 i can duplicate the threads but the switch -p always works on one port
View 3 Replies
View Related
Sep 26, 2010
I have forwarded both port 22 and 9000 on my router. I can connect on 22 and remotely login into the machine. The problem when I start my java listener program which is listening on 9000 it cant not establish any connection. I have even add this into the iptables too -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 9000 -j ACCEPT. I have disabled the SELINUX too. What else must I do to make it work any suggestion please?
View 6 Replies
View Related
Aug 12, 2009
host A: Fedora 7 has bind 9.4.2
host B: Fedora 11 has bind 9.6.1
I want to migrate my bind configuration from A to B I've read the release notes and man pages and I can't see why copying
/etc/named*
and
/var/named/*
I checked /etc/sysconfig/named too... Seems to have no effect on my brand new install on Fedora 11. Host B stays basically un-configured.
View 2 Replies
View Related
Mar 12, 2010
I tried to add my wife , and when I put in a password for her, this error comes up."Please set a valid user name consisting of a lower case letter followed by lower case letters and numbers." I did all that and I still can't set a password for her.
View 3 Replies
View Related
Aug 18, 2010
This message appears very often in teh output of very different programs, for example Firefox/Swiftfox, Thunderbird, Mplayer In case of Mozilla apps it sometimes freezes KDE interface too (can't switch windows or panel does not pop-up) for a few seconds. IPV6 is not compiled into kernel and module is not built. It is disabled on the eth0 interface too.
View 1 Replies
View Related
Jun 30, 2011
I am writing a ping kind of program for my own application. This application needs to run with non root user privileges. This needs me to create a raw socket. But the ping connection is failing because of creating raw socket with non root user.How can I run the application successfully with non root user privileges using raw socket creation?
View 4 Replies
View Related
Dec 28, 2009
I've got a weird problem on my fedora 12.
My computer is running behind an ISP box, Firewall shut off, SELinux disabled.
I've a local IP address : 192.168.0.2 dynamically given by the ISP through DHCP
I've got bind installed. I've defined a domain (let's call it mydomain.com) in the /etc/named.conf this way :
Code:
//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
[Code].....
Finally, the named service is running.
Here is the trouble : I can ping my domain, but when I try to browse to this domain in my browser, the connection is rejected !
View 2 Replies
View Related
Aug 3, 2010
I am having problems accessing my work desktop through my home computer running Fedora 13. I am able to remote into work through MAC and Windows XP. I loaded vpnc and was able to connect to the concentrator. I also able to ping it too. I cannot connect to my desktop using rdesktop. I get error message �Unable to connect, socket is unavailable. I cannot ping to the desktop.
View 2 Replies
View Related
Jul 3, 2009
I have an x application I am trying to run under gnome. It assumes a fixed ip address and exclusive use of the eth0. I have run it under gnome on RHEL 5.3. I set the ip address and ifconfig confirms the correct address. When I run it I get "SocketConnect() error:
Resource temporarily unavailabele, port 8005. (on the terminal that I started it)
This is indicative that it has failed to make a connection to the outside world. One difference I notice between the non-working and the working is that, the error message seems to stop coming out on the fedora gnome, almost immediately, whereas on the other installations it will come out indefinitely until it connects. is virb0 interferring. What is different in the networking on fedora 11 then RHEL?
View 2 Replies
View Related
Apr 21, 2011
I'd like to pass all traffic between bridge ports via the FORWARDING chain, so I changed following sysctl parameters:
Code:
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
[code]...
View 1 Replies
View Related
