How does bind system call names a socket.Code:bind(server_sockfd, (struct sockaddr *)&server_address, server_len);I see use of bind in majority of programms as above.But any of the arguments is not the name of socket.
I am trying to create a socket to listen for a bootp response so I am using a PF_PACKET socket so that I get the response based on my mac. My problem is that I don't want to hear all traffic (as I do now) so would like to use a specific port number and bind to it.
I am learning network prgramming in linux in c,and try to build a server and in this server I want to bind the listening socket to a paricular Ip address and port.Bind function is showing error,I did not want to use wild card. Here is the code.
In user mode [non-root] linux machine, tried to bind a socket by using a"ioctl(iInterfaceSocket, SIOCSIFADDR, &stCommand)". I am getting error 13 -> Permission denied because of user mode. If change from usermode to kernel mode everything works fine.I need to bind the socket in user mode only, please suggest solution for the abovewhile explaining the above,
iam just trying to connect to server which accepts one client and server will read(blocking operation) infinitely, but After closing the client socket the server "read operation" is returning zero and "errno variable(in errno.h)" value is also zero. how can i detect whether a client socket is closed/active..?
I am currently trying to get a B.A.T.M.A.N mesh network up and running. the thing uses UDP port 4305 for broadcasting to nearby nodes and it seems this port is closed or used by something else.
now i have tried to open this port with commands like
Code:
iptables -A INPUT -p udp --dport 4305 -j ACCEPT iptables -A OUTPUT -p udp --dport 4305 -j ACCEPT
it still gives me the same error saying the socket cannot connect.any way for me to scan that udp port, see what is blocking it and open the thing up ?
If I open a raw SCTP socket, am I able to bind to a specific port? (I only want to see SCTP packets from a particular IP address AND port.) Or, any raw SCTP socket, regardless of port binding , will get all SCTP packets received by the OS from that IP address? The port doesn't matter and is ignored.
the above code works fine.if we copmile and run ./a.exe 192.xx.xx.xxx 1111 and press enter it works fine..everytime it asks "Please enter the message: " and if give that will be displayed in server. but my problem is i dont want to print everytime "Please enter the message: " i just want to feed some words one by one to the socket.
im getting that error in my code for some reason. I compiled my code, and when i try to run this server it throws me an error on my call to setsocketopt(). The only way it can reach that part of my loop is if it succeeds when it calls sock() so I dont understand why the error says its an operation on a non-socket. Im just trying to set up a server to pass messages from a client to it a viceversa. Here is the code:
Code: int main() { int socket_fd, new_socket_fd, k; struct addrinfo hints, *server_info, *p; struct sockaddr_storage peer_address; code....
I am encountering a wierd problem in FC12. When I try to lunch a program that listens to a lower port such as 80 or any one that is less than 1024, I always get "Permission denied" error message (I am running it as root!).Then I try starting httpd service daemon that listens to 80, no errors, the daemon started and listend to 80.PS: I checked selinux, it has been disabled.Do you have any knowledge on this case? BTW, the kernel version is:2.6.31.5-127.fc12.i686.PAE #1 SMP Sat Nov 7 21:25:57 EST 2009 i686 i686 i386 GNU/Linux
I finally got the certs to configure: openvpn --config server.conf Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010 Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1 Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100 Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500 Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2 Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2 Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072] Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194 Tue May 3 17:26:27 2011 UDPv4 link remote: [undef] Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256 Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62 Tue May 3 17:26:27 2011 IFCONFIG POOL LIST Tue May 3 17:26:27 2011 Initialization Sequence Completed
But openvpn still won't start; where to go from here. Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use Tue May 3 17:54:25 2011 Exiting
I am running vsftp on one of my systems and when trying to connect to it it errors out with this: vendion@Loki:~> ftp 192.168.1.100 Connected to 192.168.1.100. 500 OOPS: could not bind listening IPv6 socket
I have tried stopping the firewall and even disabling IPv6 nothing changed, any clues as to what is going on?
I am using haproxy for the first time. I downloaded the latest version 1.4.7 and then unpacked it.then opened the terminal and wrote the command $make -f Makefile.bsd REGEX=pcre DEBUG= COPTS.generic="-Os -fomit-frame-pointer -mgnu" After which an executable haproxy file was created which I copied to /usr/local/sbin. then i wrote $sudo make install then I make a configuration file in /etc/haproxy.cfg which is as follows
[Code]....
But it's not working it is various kind of errors intially it was showing "cannot bind to socket" so tried changing the port number but didn't help I also used command like $sudo sysctl net.ipv4.ip_nonlocal_bind=1
I have a server listening on incoming client connections. Once the client establishes SSL connection with the server, the server waits on read() from the client. Only Client can disconnect the connection. I want to have a timer in the server program to wait for x secs after read() and then disconnect the Client connection.
i have a server program which accept multiple client connection and am using polling. like every 2 secs it will look to client whether any data is received after it binded. i have used setitimer but there is runtime error i got.. the server accept all client connection but doesn't execute any msg which client sent.
i have problem in socket programming, while displaying received message in file,i got a problem... i cant able to write it in the file.... this is the code....
now my problem is run time error i can able to create file but i cant able to write file....log.txt contain nothing.... as here i have give sample code... dont say not initialising function and all.... i have initialised , please only see func1() - my problem is only not able to write msg which i got received from the client..
When sending data over the socket, the sending socket includes 0x00 after each sent byte. I wonder how this can be avoided -- I just want to transfer the data in the tx_buffer as it is.
# ./serv & [1] 6895 # ./EUG 127.0.0.1 EUG: Data to be transmitted: 0x35 0x32 0x30 0xff 0x03 0x31 EUG: Data - #Bytes transmitted: 6 ./serv: Here is the message: '5'
Is it possible to swap a client ip and port ? This is what I am trying to do. Let say you have Comp1 and Comp2 And you have Server between them. My goal is to get Comp1 and Comp2 know each others IP So Comp1 connects to server And server stores comp1's IP In a text file or other place And Comp2 connect to server And server also stores his info And then both comp1 and comp2 dowload the tex file And use the info on it.
How can we build a packet using C?we have a structure called sockaddr_in which is use to for IPv4,so that we can define address,port and etc in this way:
This is my main question:Quote: In raw socket sniffing: how do I copy data from a structure into a char[] or pointer? My problem: I started doing some raw socket programming in OpenWRT (I'm a newbie) for research. It's been a long time since the last time I programmed in C, so here's my newbie question/problem.
I'm receiving packets and using an .h file with the structures to get the information of each 802.11 packet in monitor mode (attached to this post).My (simple) goal is to get the Tx MAC Address. No luck. This is my "read the prism header" function:
I am currently doing a research on video transmission over wireless LAN. I tend to transmit my offline file (xx.svc) from server to client.It may sound stupid (since I have a very little knowledge about c programming and raw socket), but my biggest challenges is that when I want to write the file to the buffer, how actually to define/include the file at the programming coding? where I need to locate the file? Is it at the same folder with my c programming, or somewhere in the linuxinclude folder?
Can anyone just give a simple example on how to include a file and write it into a buffer before send it through raw socket.
I am looking to be able to connect to an IRC server in a C program. I have followed some instructions from an old book I have however it doesn't seem to be working. I've tried connecting to localhost on my ssh port and it still doesn't want to work. This is what I have so far as a piece of skeleton test code:
I have currently had the need to go back to basic socket programming, and implemented a simple udp packet sender. But I realized I needed to be able to select which network interface to send the packets from.
The reason is so that one of the interfaces has vlan tagging, and I need my UDP packets to be accordingly vlan tagged. For example, one of the interfaces is eth1.200.
Has anyone had an issue with gdb not being able to send a UDP msg across a socket?
I have ComponentA sending a msg to ComponentB utilizing gdb. ComponentB gets the msg. ComponentB sends a msg to ComponentC. ComponentC does stuff to the msg and sends a msg back to ComponentB using gdb. ComponentB never seems to receive the 2nd message.
If I don't use gdb the messages Tx and Rx without an issue.
I'm flying blind without gdb to figure out a different bug.
(Let me first of all state that I am a newbie to any form of programming.) I have been trying to create an IP header + TCP header and send this to another machine on my network.using C)I used the normal stuff: two structures for the headers, a sockaddr_in structure, call to function socket with SOCK_RAW, setsockopt with HDRINCL and call to sendto.All functions seem to return fine (values other then -1) the function that I have used to calculate the checksum for the IPheader matches the value that I manually calculated. I just don?t see the anything coming out of the interface on whireshark.I assumed that it had something do with my piece of code so I used two examples (including mixter void ru rawip html A brief programming tutorial in C for raw sockets[/url]). They show exactly the same thing functions return fine but no packets being send.I use Ubuntu 9.04 2.6.28-14-genericThe machine has two interfaces one with an ip address the other interface is in promiscuous mode. (both interfaces connected to a switch with port mirroring) I can see all normal traffic in/out.