I am new to fedora and I've installed fedora 14, I want to know what are the steps to make my machine act as a transparent (IP-less) bridge? Second, after setting the bridge, I want to make all the packets that passes through the bridge execute a servlet filter (to make some tests and add cookies) is it possible? Is there a simpler way to do those tests on the packets and add cookies?
View 4 RepliesThe challenge: I am trying to setup a piece of hardware that is transparent to the network that transfers ip packets between two interfaces without adding a "hop". Details The particular problem I'm having is that one interface is ppp, the other is ethernet. It is trivial to setup a bridge between two ethernet devices but I am having trouble finding anything for ppp<->ethernet.
Here, the ppp link is an internet connection, and the ethernet connection has exactly one device attached. Once the ppp link is negotiated, I want the ppp peer to think it's talking directly with the device on my ethernet interface and I want the device on my ethernet interface to think it's talking directly to the ppp peer.
Current solution: The best solution I currently have is to alter the routing table. When the ppp link is negotiated, I am given an ip address. I add a route that directs everything to that ip address to the eth0 device. I also set a default route to the ppp device. Now, anything that comes from the ethernet side gets forwarded to the ppp side, and anything directed towards my ip address gets forwarded to the eth0 side.
I am trying to set up a network like this:
Internet <---> Router <---> Debian server <---> Windows PC
I want the server and PC to both have internet access, and I want to be able to forward ports from the router to the server. I know how to configure the server to give the PC internet access, but how would I assign an IP address to the server and give it internet access? I have used a very similar setup a few years ago, but I can't remember how to do this.
I am using vnuml to test a network project. I have one Ethernet card on my ubuntu 9.10( eth0) with network 10.1.0.0/16, and creating a tap0 with subnet 10.4.0.0/16. Now the problem is how to work them together, such that packets from one interface goes to other one?
View 2 Replies View Relatedany one are implementing Transparent Cache in bridge mode. after googling i found article but its not working for me. any one have done this before ? [URL]
View 4 Replies View RelatedI want to set up a bridge using bridge-utils within /etc/network/interfaces like is shown here in this guide: [URL] The problem is that, at the same time, I want eth0 to have a specific static IP address. Right now I have a configuration for eth0. This guide tells me that I should not configure eth0 outside of the br0 configuration.
View 3 Replies View RelatedI need to execute scripts to setup the bridge after openvpn is restart. Where do I put the scripts? How do I get openvpn to execute them?
View 2 Replies View Relatedi have a linux server runnig oracle applications. i need to access this server from putty using ssh through internet. i did by registering my static ip with the dnydns.org and i am able to connect to the server. but now there is no security to authenticate any user as any one knowing the password can login to it.
i thought of configuring the firewall of linux server but the client ip`s are not static and they change continiously. so thought of keeping one more pc between the server and the router which will do the work of authenticating. but i am confuse as how to configure it to allow the packets coming from the internet after authenticating and to by pass the packets generated from internal LAN?
i need to write a program in c that can sniff packets from Ethernet and distinguish RTP packets from Non-RTP packets, i have no idea what should i do
View 9 Replies View RelatedTomcat6 is built in server with it but i dont know how to use it .I am doing a dynamic web project based on servlet and eclipse galileo is being used as IDE for it.
View 1 Replies View RelatedI have 2 NIC's in a box. One of them is external and doesn't matter for this question I don't think.
The other NIC is 192.168.100.3. It hosts an iSCSI Target and SMB Share on my LAN. It's works great.
I have another PC that has NIC at 192.168.100.101 and it hosts my DHCP (Scope: 192.168.100.5-25) server for my LAN.
I have a hardware firewall at 192.168.100.1 and it serves inet to the LAN on a different external connection.
So...
I currently have a WAP (cheap p.o.s. netgear router in WAP mode that keeps overheating). I want to eliminate the WAP device and add a WiFi NIC to the Top PC above.
So, on the first system I would have:
NIC 1: External IP and External Gateway
NIC 2: Static IP 192.168.100.3
Proposed WiFi NIC 3: Static 192.168.100.4
Question:
If I bridge NIC 2 and NIC 3 like this:
# brctl addbr br0
# brctl addif br0 eth0
# brctl addif br0 eth1
Then I simply put the WiFi in Ad Hoc, will another WiFi in Ad Hoc (for example my laptop) be able to "see" 192.168.100.101 (DHCP) & 192.168.100.1 (Gateway) (via WiFI 192.168.100.4 through the bridge to 192.168.100.3 and on to the LAN)?
Also, can the two NIC's be bridge together even though they are the SAME subnet?
I tried google but without success. I have a small home network and one computer has to work as a bridge (comp1), it connects to the internet through wlan and is connected with cable to other computer (comp2), I would like to to make that second computer member of a local network with internet access.I was trying this:
Code:
ifconfig wlan0 0.0.0.0
ifconfig eth0 0.0.0.0
brctl addbr br0
brctl addif br0 wlan0
brctl addif br0 eth0
[Code]...
I want to connect my dataone broadband connection in bridge mode in fedora 7. As i am currently using a bridge connection through this modem (smartAX MT882) in win XP, i want a bridge connection in fedora 7 too to access the internet from linux. I have gone through some forums discussing this issue. somewhere i have found the option "adsl - setup" and tried it in my fedora 7. But it is showing the message "adsl- command not found" on this issue. I need a detail step by step procedure for brigde connection using datone in fedora 7.
View 3 Replies View RelatedI'm trying to set up a Linux box with three ethernet interfaces as a bridge where I can do some packet filtering. I don't want this box to have any IP stack, packets that are allowed through the filter should be forwarded without changes just the way a switch would do it. I have build a kernel with ethernet support but no IP stack. It detects my interfaces, and I can bring them up with the ifconfig or ip commands. But when I try to start a bridge with brctl I get this error message:
can't setup bridge control: Address family not supported by protocol
A google search for that error message gave me no results at all. The command I used was "brctl addbr br", which does work on a full installation. Does brctl require IP support in the kernel? That would be a bit odd I think, since brctl doesn't do anything IP related, everything it does is at lower layers?
Does anybody know what the above message means, and what I might have been doing wrong?
What I am trying to do: bridge 2 NICs in my linux box eth0 connects to linsys router (which in turn connects to internet) eth1 connects to Xbox 360
What I did:
Code:
ifconfig eth0 0.0.0.0
ifconfig eth1 0.0.0.0
brctl addbr br0
brctl addif eth0
brctl addif eth1
[Code]...
I'm sure this is a bridging issue and there is just some option I'm not setting correctly. Also, the reason I'm connecting the Xbox 360 directly to the linux box and not to the router is for traffic monitoring purposes. Note that all connections and functionality work perfectly when the Xbox IS connected through the router.
I'd like to pass all traffic between bridge ports via the FORWARDING chain, so I changed following sysctl parameters:
Code:
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
[code]...
I have set up many Dansguardian/Squid proxy servers. All of them have been on a network where I could use Microsoft Group Policies to force the proxy settings on each machine. The entire setup is quite easy, surprisingly robust, and reliable as hell.
My Dentist talked to me today and asked for something different. He wants to set his office up as a wireless hot spot for his patrons, and he wants their surfing directed through a proxy server. I plan on putting them on a completely different subnet and independent router. Now, since I won't have the convenience of GP I'm wondering if there is a way to force all internal Port 80 traffic through the Proxy server but obviously not the Proxy itself. I would like to use the router to do this and not the Linux box. Is there a low cost home router like Linksys or Netgear that will do this?
I've problem with configuring transparent proxy on Fedora v13 was checking with several examples, last one from here on router (cisco 1812) everything seems ok, think there is a problem with Linux
Squid machine and router 'see each other'
Code:
While try to open web page, on GRE there is:
Code:
But when want to see what hapenning in tunnel between router and squid - there nothing...squid configuration is ok - was checking before try to make it transparent.
My skill in fedora linux is all acquired by reading online and trial and error. I manage to set up my squid 3.0 proxy server in fedora 11. It is working smoothly as I wanted it to be. I have one client who is running bittorrent that drags all the bandwidth of our network.The problem is I cant make my server work tranparently. I want to make transparent proxy so that it can support my wireless router and I want to control the bandwidth to a fair level for everyone without them knowing.
Please somebody help me configure iptables in step by step, specifically in fedora 11. And all other necessary configuration needed to run my transparent squid 3.0 proxy in fedora 11.I know there's a lot of Linux Genius here that can help. Please help me I needed it badly.
My current network setup at home is all wired, and that's worked for me so far. Now I want to set up a wireless connection on my Linux box that I can connect to with both my laptop and my Nintendo DS. I'd like to be able to host a wireless network from the Linux box, connect to it with some other wireless device, and have the wireless device communicate with the router, the internet, and other computers on the wired network. I have the wired network set up (statically configured) as eth0. Other network adapters present on the system are eth1 (not in use) and wlan0, wlan1, and wlan2 (identical cards, remnants from the last time I experimented with wireless).
So I guess my question comes in two parts:
1) How do I set up wlan0 such that it can host? Is Ad-hoc mode okay for this, or do I need to set it up in Master mode?
2) How do I forward connections between the wireless net and the router?
Note that I will be using WEP, as it is all that the NDS supports. I'd like to set up MAC filtering as well, but not until after I get something that works.
"I am new to Linux. Could you please guide me how to make ADSL bridge connection. I have tried to make connection using Network manager. But, it some times works and some times doesn't works."
View 1 Replies View RelatedI am using Fedora Core 9.0 and Squid Cache: Version 3.0.STABLE2 .
Now i am trying to use the squid as a proxy server but its not working its giving error like this ...
While trying to retrieve the URL: /
The following error was encountered:
Invalid URL Some aspect of the requested URL is incorrect.
Possible problems:
Here is my squid.conf
While trying to retrieve the URL: /
I have also try to forward the traffic coming on 3128 to 80 but its not working:
How do I configure a network bridge to start on boot?
I have two network interfaces eth0 and eth1.
Here is my current network script configuration:
Code:
#/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
HWADDR=00:10:18:4e:5e:a7
[Code]....
The bridge will come up if I restart the network service after boot....but it won't automatically come up when the computer starts.
I am trying to set up bridge, and everything seems to be ok, except 1 thing, it disappears after reboot. So, what I am doing:
Code:
brctl addbr br0
brctl addif br0 eth0
and adding /etc/sysconfig/network-scripts/ifcfg-br0, here it is:
Code:
GATEWAY=192.168.1.1
DEVICE=br0
BOOTPROTO=none
NETMASK=255.255.255.0
DNS1=208.67.222.222
DNS2=208.67.220.220
TYPE=bridge
HWADDR=00:18:f3:75:18:78
IPADDR=192.168.1.3
IPV6INIT=no
ONBOOT=yes
USERCTL=no
and my ifcfg-eth0 is:
Code:
GATEWAY=192.168.1.1
DEVICE=eth0
BOOTPROTO=none
NETMASK=255.255.255.0
DNS1=208.67.222.222
DNS2=208.67.220.220
TYPE=bridge
HWADDR=00:18:f3:75:18:78
IPADDR=192.168.1.3
IPV6INIT=no
ONBOOT=yes
USERCTL=no
How to make it working after reboot?
My Laptop can Connect to my wireless modem device, but I don't know How can I connect to internet (ADSL) by My laptop (Bridge)?
View 6 Replies View Relatedwhat i want to do is
client <--> wlan0 <--> computer <--> eth0 <--> internet
i have 2 network connections eth0 wired connected to internet wlan0 wireless (work fine) i have installed hostapd with madwifi and so on oki when i run hostapd the clients see the hot spot oki clients connect with wpa oki network manager run at demand not automatic (keep it for internet help) now i'm a bit lost what do i need is wlan0 give the client an ip (dhcp demand) create a bridge between wlan0 and eth0 steps to create a permanent bridge between wlan0 and eth0
I have setup hostapd and a bridged setup with br0 bridging eth0 and wlan0. The setup works but unfortunately not on bootup. The reason is that the bridge can't add iface wlan0 because it is down for some reason at this time. When hostapd is running (after the network script) the interface is up and can be added to bridge via
[Code]....
In my Fedora13 machine, while in mobile broadband, i can ping and skype outside, but cannot browse/yum etc. Few output that may be of relevence are here:
$ netstat -s
IP:
149468 total packets received
6 with invalid headers
16174 with invalid addresses
0 forwarded
0 incoming packets discarded
118821 incoming packets delivered
101331 requests sent out
124 outgoing packets dropped
866 dropped because of missing route .....
I've been trying for a couple days now to get netem rate limiting to work on a Fedora 12 i686 virtual machine (both on VMware Fusion and KVM), and have had no success.In order to do outbound rate limiting, I want to use the netem token bucket filter (TBF), as described here:[URL]Unfortunately, attempting to use the TBF results in this error:
Code:
[root@f12-build ~]# tc qdisc add dev eth1 parent 1:1 handle 10: tbf rate 256kbit buffer 1600 limit 3000
[code]...
I have a hardware device with two ethernet ports, eth0 and eth1 running Centos 5. Basically my goal is to forward packets from eth0->eth1 and eth1->eth0 as well as get a copy of these packets for analysis. If I set IP routing to do the forwarding then I won't get a copy of the packets for analysis.
View 3 Replies View Related