I have tried to find a solution for this problem, but i haven't found one yet. I have a mediabox with no speakers, and a desktop with speakers. So I want the audio from the mediabox played through the speakers of my desktop. Is there anyone who knows the best way to achieve this?
View 14 RepliesI have Ubuntu 11.04 installed on my Toshiba Satellite C655 laptop. When I plug my headphones, they sometimes work, they sometimes don't, but that's not the main problem. When they do work, sound also plays out of the speakers. The only solutions I was able to find were for earlier versions, which don't work for 11.04.
View 9 Replies View RelatedI did a fresh install last night everything is fine but my sound will not play through speakers, but will play through headphones. My video and sound come out of hdmi video card.
View 1 Replies View RelatedI'm currently running 32-bit Ubuntu 10.04 on a Pentium 4. I'm currently using the LXDE desktop environment but the problem is the same in GNOME. I have new Altec-Lansing BX1220 speakers. They didn't come with a driver disk and a Google search didn't return any drivers, so they should be plug-and-play. When I plug them in, the light turns on, and with the volume high enough it returns feedback. However, they don't actually play what the computer is playing. I went into alsamixer and made sure all the volumes were turned up; it didn't help. It was plugged into my microphone jack.
View 1 Replies View RelatedI have onboard sound, and have a blue jack that can be used for input sound wise. You can plug a device in and then just play it through your speakers. This works for me in Windows 7, but I'm not sure how to get this to work in Ubuntu.
I went to my sound settings, but didn't see anything to make my input jack active. I'm just basically using my pc as a pass through to play through my pc speakers.
It was so close to a perfect install. The only thing really missing is this issue with the sound. I've searched all over the forums and i found one thing where you get the model and codecs and write them to a file, however, I can't seem to find what my "model" is because none of the postings have anything about Lenovo laptops. Here is the command they all asked for:
Code:
cat /proc/asound/card0/codec#* | grep Codec
Codec: Realtek ALC269
Codec: Intel G45 DEVIBX
With that info, how do I get the model and how do I get my speakers to stop playing when headphones are plugged in. Also, I don't have any software installed like pulse audio either, so it's not that.
I looked around the settings on Ubuntu and I cannot prevent sound from being played on my laptop speakers when external (more powerful) speakers are plugged in. Windows automatically defers all sound output to the external ones as soon as it is plugged in.
View 6 Replies View RelatedMy Toshiba Satellite Pro A200 running Fedora 8 continues to play sound out of the laptop speakers when external speakers are plugged in (and no sound out of the external). What can I do to diagnose/fix this? code...
View 7 Replies View RelatedWell, the title pretty much sums it up. Whenever i plug in my external speakers, my laptop speakers continue to put out sound, which is good until i turn up the volume and hear rattling.
I am running ubuntu 9.04 64-bit 2.6.28-13 on an MSi GX620.
I don't know what I did but I lost all audio. I'm running F15 with gnome 3. By opening system settings and then sound I don't find anything muted. Under hardware I have 3 devices, the first is RS880 Audio Device (Radeon HD 4200) this one has no sound at all when I click test speakers. Then I have quickcam comm STX and then I have Internal Audio which works by clicking on test speakers.. I have no clue of where to start to fix this but reinstall everything again.
View 1 Replies View RelatedSince I bought my computer and I installed Linux on it, I had this problem...
Back in the day I never Found a REAL Solution and finally my "solution" (in Fedora)
was installing "pavucontrol" to choose the Devices when I needed to Switch.
Via the Pulse Audio Volume Control I was able to Mute speakers or Headphones
at my will, even if I had both connected, this thing worked from F12 to F14 very well...
(The same problem is present in every distro I tried and sometimes it was solved the same way in other distros)
But Now, I'm in F15 And my magic workout doesn't work anymore... it doesn't matter
wich device I choose as output, the PC simply don't mute one or another and my headphones and speakers sound at the same time.
The Sound card is a HDA INTEL with the Realtek ALC662 rev1 Chip, as I said before,
I'm using Fedora 15 KDE (64 Bit version) and I'm running ALSA v 1.0.23 with pulseaudio 0.9.22-5
The output of "lsmod | grep snd" is:
snd_usb_audio 98871 1
snd_usbmidi_lib 18066 1 snd_usb_audio
snd_rawmidi 20308 1 snd_usbmidi_lib
[Code]....
I have had sound working for months but recently I plugged in a USB headset and to get it to work, I had to open pulse audio and change to it. I later unplugged it, turned off the computer and have now restarted it (without the headset) and now I get no sound through the computer speakers! What do I do?
View 12 Replies View RelatedI Have a fedora 13 X64_86, running on a Asus M3A Board and Phenom 9500 processor. I can Hear the sound but at times its cracky on both Headphone and speakers when i plug-in the headphone jack in the front pannel (front pannel is AC 97), the speakers continue to play. microphone fails to work I have removed Pulse audio and its subcomponents and reinstalled it.
View 8 Replies View RelatedI just installed Fedora 15 and I'm liking it quite a bit but I have no sound output. My USB speakers (bose companion 5) show up in sound preferences, and I've selected them as the sound output device. And whenever an application (such as Rhythmbox) plays music, it shows up in the list of sound-outputting applications. But there's no sound.
I've checked that none of the mixers are muted (in fact all are on maximum), and my speakers are not muted either. Switched USB ports; it's working fine now. Wacky. Something about order of initialization? I plugged my mouse into the "offending" USB port and it works fine too. OK, I get it, it's not about the USB port. I have to plug in my speakers AFTER Fedora boots. That's kind of annoying but bearable.
I'm running FC 14 on an Alienware m15x-R1. It's an older one that they made before Dell bought them out. My problem is that the internal speakers don't work, but if I plug a headset in to the audio jack, it works fine. lspci tells me I have an audio device Intel Corp HD Audio Controller, which may or may not be helpful. I booted it up with an Ubuntu live CD just to make sure it was the hardware, and I get the same results.
View 1 Replies View RelatedDecided that my internal RealTek HDA was pretty meh. I'm now using an SoundBlaster USB external. After disabling the internal sound device in System > Preference > Sound ...everything works perfectly through the external device, except Firefox, no sound at all... not even with Flash...
View 5 Replies View RelatedI am running fedora 14 64 bit on Dell Inspiron. All of a sudden sound from speakers is not coming. They work in windows. I am suspecting some update with pulseaudio. However, earplugs work.
View 6 Replies View RelatedIm having trouble with playing sound in F14. I used to have F12 where everything worked perfect, recently I've changed to F14 (complete reinstall) and I noticed that my speakers don't work and the sound through the headphones is to quiet.It is as if F14 doesn't recognize my sound card?
View 7 Replies View RelatedI recently installed realtek sound driver software in my system,
but after installing it,the speakers are not working....
I'm using fedora 13(x86_64).
i just want to make my system speak,like before....
how to make my speakers work ?
I'm trying to figure out what in the world is going on with my sound in OpenSuSE. I put in a brand new Audigy chipset soundcard and finally got some sound to come out of the speakers. I used the guide here: SDB:AudioTroubleshooting - openSUSE. to fix the permissions on my sound and am able to get sound-test to play sounds as well as connect to the sound device in my vmware and play sounds. That being said, I have terrible sound quality coming out. There is a lot of static sound like white noise and the volume of the actual sound played is very low compared to the noise. The sounds also distort somewhat.
I have tried the pulse audio change in the tutorial above also and have been searching around google. The only problem that I saw similar was a person who fixed the problem by updating KDE. I don't have KDE, I'm using Afterstep.
This problem presented itself upon upgrading to ubuntu 9.10. Any time something affects the sound system the buzz goes away. If a song plays, no buzz. If I simply adjust or mute the volume, no buzz. But after 10 seconds of no sound related activity, the buzz returns. This is a very loud and aggravating buzz, most likely made worse by the fact that I run my sound through an amplifier.
View 2 Replies View RelatedI installed Fedora 14 on a Toshiba Satellite L650-18X laptop. The on board speakers work fine but when I try to connect external headphones, the sound still comes from the on board speakers and not from the connected headphones. Also the microphone jack doesn't work.
As I searched the web for possible solutions I think the problem is related to the Alsa sound driver. I kindly ask if someone with experience could share details regarding the Alsa configuration for this particular sound driver in Fedora 14 in order to solve this issue.
For users whom wish to install the wireless driver on the Toshiba Satellite L650-18X, Broadcom offers great information on it's official site
HTML Code: [url]
Here are the steps the user needs to perform in a terminal window in order to install the wireless driver :
I have a network of about 25 computers. All of them running either Ubuntu 10.04 or 9.10. I can ssh into each machine with no problems. I want to type a terminal command and have an audio file play in the speakers of the user at the remote machine. The users have soft phones..... all sound is pushed through their headsets..... If I wanted to say.... play a cat meow in their ear or maybe a dog barking.... how would I do this?
View 9 Replies View RelatedAfter installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
(noob)I am running ubuntu 11.04 on my ASUS k60IJ, the sound plays out of both my earbuds and the internal speakers of the laptop.
View 6 Replies View RelatedMost of the BT stuff I see involves connecting a headset to the PC...I'm not seeing much for what I want to do. I have a motorola Droid, and it's pairing via bluetooth to my thinkpad just fine. I'm running Ubuntu 9.10 64bit.What I want to do is pair the PC to my phone and have the PC act as the headset, i.e., the audio from my phone comes out my PC speakers. Ultimately I'm trying to record audio from my phone, voicemails from Verizon that I'd like to save to audio files. A couple years ago I was able to do something like this with a Thinkpad in WinXP, and record audio using Audacity. I'm not seeing how to make the PC work as a headset.
View 4 Replies View RelatedMy friend and I have a problem. We both wish to listen to songs at the same time. But the problem is that our choices of songs are different. So, I suggested that he listen to his favorite song on the speakers whilst I listen to my favorite song via headphones.
But, whenever we do try this idea the speakers won't play when I plug in the headphones.
Anyway so we can make both speakers and headphones play different songs at once?
First things first: I'm running F12 KDE and yum informs me that I'm fully up to dateI'm having a problem where the second sound that my computer plays stutters - this is best seen in amarok, the first track will play fine but the second track will stutter and play really slowly. I asked on IRC and the suggestion came back that it was possibly due to this bug[URL]
View 3 Replies View RelatedI am having sound problems with Fedora 14 the problem being no sound! I have been trying to fix this for a few days now and have spent hours and hours, I am considering putting windows back on because I am so frustrated but I would really like to get Fedora working if possible. I am new to Linux based systems but am really impressed so far, I installed it on 2 of my laptops, one of them works great, have sound no problems, but the other one has no sound, it's the older one that wont play sound, I don't know if that is relevant.
I have tried so many different fixes that I have found on the forums that I can't remember everything I've done. Now the first thing you would probably say is alsamixer -c0, I have checked that, it shows 2 master volumes one was up and one was muted. I turned the muted one up but it didn't fix the problem. But it may be worth mentioning that when I have returned to alsamixer it was back down. I tried the alsactl store command but after a reboot it had still gone back to mute.
and just to clarify I am using su commands. I have logged in as root and tried to play sound because I suspected a permissions problem but I can't play logged in as root either.
I have uninstalled, reinstalled and uninstalled again pulseaudio. I have read it has caused issues for lots of people so I left it uninstalled. Couldn't open the sound settings in system preferences so I installed gmixer. So I have asla and gmixer currently installed.
I can't remember what else I have done, that's just what I have done in the last couple of hours, I have installed almost every sound related package that I have come across, I have messed up the operating system 3 times and done a fresh install. The default sound card is ATI-IXP. The laptop in question is an IBM thinkpad R15e
I own a netbook (samsung nf210 to be exact) which has Linux Mint 10 installed. What I want to do is to make both, headphones and speakers, play the same output at the same time. I believe it is possible to make it since many people are facing such condition and treat it as a pulseaudio bug (or smth like that) And it would be perfect if it was possible to easily switch between the modified configuration (dual output) and original configuration. I've noticed there are some profiles (analog output, duplex, surround etc.). Is there any way to modify those profiles? If it was, I could modify the Analog Surround Output 4.0 profile and assign rear speakers to headphones and front speakers to internal speakers of my computer.
View 1 Replies View Related