I have bought a dell inspiron 1545 laptop and have problem with wireless before this it has a ubuntu os default but I install now only fedora. When I using ubuntu have no problem with wireless and it came and connected. But now fedora 11 does not find the wireless servers. maybe i must install its drivers for wireless?
View 1 Replies
I am new to Linux and i just installed f15 kde on my computer. I have a wifi usb adapter and it is recognized and everything, however, i cannot seem to find/enable wireless and the wireless tab in the network manager is greyed out. Also, from reading other posts i believe there should be an option to 'Enable wireless' when left clicking the network interface icon in the toolbar. All I see is is 'Enable networking'.
lsusb:
dmesg:
iwconfig:
I had Ubuntu installed before and it worked fine. As far as I can tell all drivers and firmware are working fine so i just need to enable wireless networking i believe.
Every time I start up my Samsung NC10 the wifi doesn't seem to find my wireless router at all and instead tries to connect to my printers network. To solve this I need to disable and re-enable wireless until it automatically connects. I know this isn't exactly a major problem, it's just getting pretty annoying. I'm using Fedora 11 btw.
View 3 Replies View RelatedI have been running F13 since it came out, with the wireless working fine since I got it working (using the RPM Fusion repository, broadcom-wl-5.60.48.36-1.fc13). Since I updated software (without reading what was to be updated), yesterday, I am unable to even find wireless networks, although I am, as you can see, able to access through eth0 It is not a hardware problem, as I can not only find them, but access them on Ubuntu 9.10 live disc. Below is my lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[code].....
i am new using linux i install fedora 13 in dell mini 10 and i want to how i find and install the drivers for my laptop. I tried Ubuntu the last time and it has some hardware detection but i dont know how it made in fedora
View 5 Replies View RelatedI normally connect to a free wireless project, and did have a Windows box until yesterday when I installed Fedora 10. When I was using Windows, I was able to connect to the unsecured wireless network. Now on Fedora 10, the wireless card is working and is able to pick up signals but the signal strengths are markedly decreased and I am unable to see the network which I usually connected to.I really don't want to go back to Windows.
View 12 Replies View RelatedIm just after installing fedora 12 dual boot with windows 7. When I try to find my wireless network the laptop doesn't seem to picking it up. It works perfectly when I connect with a LAN cable.
View 2 Replies View RelatedJust installed f14 on my Toshiba laptop, which has a realtek ethernet card. i installed the drivers from the realtek site with no issues (also, i know the card is good, i had it working on suse a while back). No matter what I try, i cannot seem to get the computer to recognize there being a wireless connection (tells me no such thing as wlan0).ifconfig shows the following:
Code:
# ifconfig
eth0 Link encap:Ethernet HWaddr 88:AE:1D:F4:AD:88
[code]...
I am unable to access wireless network from my notebook. My configuration is Dell i5, 4GB RAM and 1397 W-LAN and I have F13. I can still access Internet through Ethernet using a LAN cable but the network monitor doesn't show list of Wireless networks which my room mate's windows 7 machine easily detects.
If anyone needs more info please provide me the steps to perform to find that out
I am recently trying to get a steady wireless connection running. I am currently using the default settings/driver Fedora 13 is stocked with. As my internet browsing is somewhat up and down in load times, I decided to check in a video game which is generally a good test for me. haha I am harshly spiking and cannot find the source of my problem so my guess is a driver issue.
lspci | grep Network:
Code:
Code:
It is is seemingly right, my Windows 7 harddrive works just fine, this is just one last of the few issues I'm having from fully formatting my winblows HD to use as Linux storage.
I cannot find any native AR5008 Linux Drivers for my card and it has been a frustrating day. I guess I'm not cut to be a network analyst just yet.
System specs:
ASUS P5Q SE/R
Intel Core 2 Quad Q9550
4GB DDR2 667
Gigabyte GTX465 1G
TP LINK TL-WN851N Wireless card
For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View Relatedcould some one please post a link to where i can find a driver for a NETGEAR WG111v2 wireless nic for mandriva 2010
View 4 Replies View RelatedI have recently switched my samsung n130 with windows 7 starter to the ubuntu netbook remix. When I go onto it, it doesn't even look for a wireless connection. All there is is a wired auto ethos. How can i get my netbook to recognize my wireless connection in my house?
View 1 Replies View RelatedI am trying to configure a Travelmate 2490 to connect to my wirelessr router, a TP-Link TL-WR941ND. It does not show up in the list when I use network manager. However when I look to see if there is a driver for my wireless network in the computer it seems to find one. I am quite a beginner so some basic troubleshooting would be great.
View 1 Replies View RelatedHave Ubuntu 10.10 on Toshiba Laptop and Brother Wireless printer HL-2170W Everything worked OK and could install printer and print. However now system will not find printer, only thing I can think of that is different is that I installed all updates a few nights ago. If I go to System/Admin/Printing/Add Printer/Find - it will not find it. Have removed and reinstalled the Cups printer config tool. I am new to Linux. System will print when booted to Vista.
View 1 Replies View RelatedI was using ubuntu 9.04 and everything was working flawlessly with my network. The only problem with 9.04 is that it was unsupported and I couldn't install the packages I wanted to such as Cairo dock so I decided to upgrade to 9.10 which is a lot better. However I ran into a problem that I never had on 9.04. I cant connect to MY wireless network (my Belkin wireless card can detect networks but not mine) I have a netgear router WNDR3700v2 with WPA2 encryption. I thought that the encryption was the problem so I turned it off and ubuntu could still not find the SSID through the network manager. My SSID broadcast is on.
View 9 Replies View RelatedI know some wireless card can work in Master Mode but it seems use madwifi driver. I know madwifi doesn't support usb dongles find a usb wireless card which can work as AP under Ubuntu. I have check this list [URL] I am not sure if ar9170usb.ko and its device support Master MOde.
View 6 Replies View RelatedI am new to Ubuntu and have just installed Ubuntu 10.04 on a Dell D600. My wired network is working perfectly however, my wireless card is unable to detect wireless networks. I am using a Broadcom Corporation BCM4306 wireless card. I have updated the drivers and it is installed correctly as far as I can tell. My card seems to be working, but it doesn't detect any wireless networks. I know that my wireless is functioning, because I can log on successfully with a windows laptop. In addition there are 5 or 6 other networks available, so it should be able to detect something. I am new, so please let me know what information you need and, if possible, how to find it.
Here is the results of "lshw -C network" from the terminal below:
mikee@mikee-laptop:~$ lshw -C network
WARNING: you should run this program as super-user.
*-network:0
description: Ethernet interface
product: NetXtreme BCM5705M Gigabit Ethernet
vendor: Broadcom Corporation
[Code]...
ive just installed the aircrack package in my dell vostro 1310 which i bought with its ordinary wireless card ( hell knows what it is. couldn't find..).At the very first time while trying to reach my wireless internet i was using backtrack 4 and i was not sucesfull.. that would be good normally, but it was not. because i couldnt do it cuz my wireless card wasnt being recognized by airmon..so i tought..i can use my wireless with ubuntu... then i got ubuntu again.. and intalled the aircrack.. as i run it i found ou t that still it wont find my wireless card...do i need any further config. to make it work with aircrack ??i can only find eth0, which is my wired network device....
View 1 Replies View RelatedEverything was working great till I updated about 8 days ago! I have since been un able to find a solution.
PC Modle MSI Wind U230
lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[Code]....
I just installed Ubuntu 10.4 LTS and it will not find my homes network. When i search for networks it shows everyones but mine and i know its not hidden, because my windows machine finds it NP. when I hard wire it, it works just fine only the wireless is the problem.
View 1 Replies View RelatedI'm new to Ubuntu. Today, I took my old Compaq Presario V3010US and gave it life with Ubuntu 10.04. The hard drive was erased and replaced with the Linux OS stuff. Ubuntu recognizes most of the hardware except my Broadcom wireless card. I find this to be a pain because i'm a newbie to linux stuff. Anyway, can anyone help me fix this? I thank you for your time reading this.
View 1 Replies View RelatedI went out and purchased a Sabrent PCI wireless 802.11n card with the RT2860 chipset because it was on the ubunutu compatibility list and has linux driver available from the manufacturer. I was impressed that the card worked in wireless G mode out of the box, which is a great start....
However, I can't find any wireless N networks. Dual booting I can find/use my N network, but in ubuntu I can only find my G network. This is somewhat frustrating because I bought this card and a new (read: expensive) Linksys E3000 router specifically to run a nice new N network...
I have downloaded, made, and installed (reboot) the latest driver from the manufacturer, but it still won't find any N networks. I found a few posts by searching here and google that alluded to changing this line: "HT_OpMode=1" (from 0 to 1) in the config file RT2860STA.dat located in /etc/Wireless/RT2860STA/ and a reboot. It didn't work for me.
Frankly all this rebooting is starting to **** me off ... I have spent most of last night trying to setup my 180$ wireless network and its still no better than the freebie DDWRT54g based wifi it replaced. I am frustrated, perhaps someone wiser in the ways of ubuntu and wireless N can shed some light on the situation....
I forgot to mention I am on Karmic Kola, amd64 with the standard gnome.
I recently installed the Maverick Meerkat distribution and am having problems getting it to find and connect to my wireless network. Additional info: I am using a Toshiba laptop and used the wubi installer to get Ubuntu.
View 9 Replies View RelatedI'm trying to find a command or application that will tell me what drivers my wifi card is using.
I've been googling for a while now and all I get in return for any query I try are articles about folks having wifi troubles.
The Ubuntu install works fine but my Windows install seems incapable of connecting. I've recently realised that I think it all started when I installed 10.04. I think 10.04 might have rewritten the firmware on the wifi module and now Windows can't connect. I'm not sure if this is possible but it is the only solution I can come up with considering that I've now tried 2 different version of Windows and they both have the same problem.
Anyway anyone know of a command or app I can use to discover which driver my card is using at the moment so that I can begin my investigations.
Just installed ubuntu 10.04 on my Dell inspiron 1525 laptop. Everything got installed right, and I elected to select the sta driver rather than the B43 driver. After restarting, the b43 option disappeared. The wireless said it connected, but when i went to firefox it wouldn't load and said server not found. My wireless card is a bcm4312. Any ideas as to why this is not working?
View 7 Replies View RelatedJust installed Ubuntu on my sister-in-law's emachines. Suddenly, her computer's not finding any wireless networks (although the other two Linux computers in the house find and connect just fine, as did her computer when it ran Windows).
~$ lspci
Code:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
[code]....
My main question is must support for Dynamic Extensions be compiled during install? Specifically Mysql and Mysqli appear not to have been compiled into php despite using the prefix "--with-ysqli=/user/local/mysql/bin/mysql_config".Or can I place the needed call to mysql extension in the php.d and download the .so file adding it to the proper direectory?If I must reinstall, where on the PHP.NET site does it address reinstall? I'm shocked not to find this in the documentation
View 1 Replies View RelatedTo start off I have a Rosewill rnx-n2x wireless adapter and a Dlink 4500 router. The problem is, the wireless network manager detects every wireless router in the neighborhood, except mine. I see this persons, and this persons, but no "My router Not yours". I even tried doing the hidden network setup and still nothing.
I have read that the rnx n2x isnt supported by linux, although I've seen solutions to make it work (which didn't work, mkdir command kept getting denied during make) link to what I'm talking about: [URL]. What I don't get though, is that if the rnx n2x isnt supported by linux, wouldn't I not be getting my neighbors connections to begin with?
I'm having problems getting the wifi to work on my toshiba satellite pro l40 (psl4be). My laptop has a wifi card built in but linux cant seem to be able to find it. I tryed following these instructions and i got this output:
Code:
james@james-laptop:~$ lsusb
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 0bda:8197 Realtek Semiconductor Corp.
Bus 006 Device 001: ID 0000:0000
[Code]...
as you can see its telling me i have no wifi card, even though i am fully aware i do. ive tryed using ndiswrapper to install the windows drivers of the ethernet adaptor but my wifi still doesnt work, im guessing ethernet has nothing to do with wifi.I intend to convert from windows, however if i cant get the wifi to work i can only see linux at a major disadvantage as i use my wifi alot.
