I just ran the kernel update for F12 and now i can't enable my Wireless Radio. I'm really new to Linux and kinda need someone to hold my hand though debugging this. I can get on with the wired connection.
View 14 RepliesI am new to Linux world. I want to configure wireless on my laptop to use ADSL.
View 9 Replies View RelatedI just loaded the boot-able cd, and I do not have enough knowledge with Linux bases OS's to figure out how to enable the wireless card. ifconfig produces an eth0 and a lo, when I try ifup wlan0, it says: configuration for wlan0 not found. I have looked at all the forums notes and cannot find anything that seams like it is the same problem.
View 12 Replies View RelatedI am new to Linux and i just installed f15 kde on my computer. I have a wifi usb adapter and it is recognized and everything, however, i cannot seem to find/enable wireless and the wireless tab in the network manager is greyed out. Also, from reading other posts i believe there should be an option to 'Enable wireless' when left clicking the network interface icon in the toolbar. All I see is is 'Enable networking'.
lsusb:
dmesg:
iwconfig:
I had Ubuntu installed before and it worked fine. As far as I can tell all drivers and firmware are working fine so i just need to enable wireless networking i believe.
I've been experiencing a problem with Fedora in which when I enable Wireless in Fedora, Wireless networking does not work in windows. HOwever, when disabled, it works correctly. Windows claims it is "not able to find any networks to connect to"
EDIT: It seems that when wireless is disabled manually on fedora before shutdown, there are no problems in windows.
I recently installed Fedora on an old computer of mine that I pulled out of storage, and I can not get it to detect my wireless network. Previously it was running Windows XP and I was able to get it to connect, but now that I'm on Fedora it doesn't even detect my network. I tried lspci and lsusb but I didn't find anything under network, only Ethernet showing my linksys. I know I must have a wireless chipset, but nothing will show.
I also attempted to yum install ndiswrapper because another thread with a similar problem suggested this, and when it prompted me for my password it wouldn't let me type. How would I go about fixing this?
I updated my F13 laptop and viola, my wireless ceased to function. WTF!? I have a ton of homework to do tonight and this is the only machine that I have. lspci
[Code]...
There is a realtek rtl8187 on my board, and windows can browse and connect to wireless networks. I installed F11 and it was capable of browse and connect to my wireless network - even if it was really slower than windows. Anyway I did some yum update+reboots and now NetworkManager don't list any wireless network, and the checkbox "Enabled wireless" in the right click menu disappeared (I can see "Enable networking" only now). What can I do?
View 2 Replies View Relatedhave a gateway nv78 laptop. I just ran the latest update on Fedora 12, and after Fedora stopped seeing wireless networks all together.
View 8 Replies View RelatedOn my ageing laptop with Intel IPW3945 wireless adapter which has always worked extremely well.... Fedora 13 with the latest NetworkManager. Seems that wireless speed has slowed to a crawl.
Code:
[glenn@leonardo ~>$ rpm -qa | grep NetworkManager
NetworkManager-vpnc-0.8.1-1.fc13.i686
NetworkManager-pptp-0.8.1-1.fc13.i686
[code]....
I have a server that NFS exports the /home directory out to other computers. On the desktop they all work great, but on a wireless laptop, this is where the problem occurs. The wireless enables after the person logs in, rendering the NFS export /home useless on the laptops.Is there anyway to have the wireless enable correctly on the boot so that NFS can mount properly at boot also?I'm using Fedora 11 (32bit) with a wireless router that has a security of WPA-PSK [TKIP] + WPA2-PSK [AES]. I could switch to some of the older versions if necessary to get this working.
View 5 Replies View RelatedQuick question. I have a Dell Latitude E6500 with Fedora 13 on it. There is a wireless radio switch (hardware) on the right side of the machine, next to the CD drive. When I flip it to "off", the wireless gets disconnected -- as I expect. But when I flip the switch back to the "on" position, nothing happens -- wireless is still disabled.
How do I re-enable the wireless after I flip the switch back to the "on" position?
I use FC9. Yesterday after system update I turned of the computer, but today when it booted the wireless didn't work, ndiswrapper device wlan0:1 does not seem to be present, delaying initialization.I have removed and again installed the wireless driver and looks like it is ok,
[root@localhost utils]# ./ndiswrapper -r bcmwl6
[root@localhost utils]# ./ndiswrapper -i /fatfs/Archiv/Softwere/Drivers/Dr_software/bcmwl6.inf
installing bcmwl6 ...
[root@localhost utils]#
after ndiwwrapper -m
it gives warning( or error )[root@localhost utils]# ./ndiswrapper -m
module configuration already contains alias directive
[Code]....
I just rebooted my netbook after updates this last week and notices the wireless is broken now. The updates updated my kernel and wl modules. I'm using a broadcom 43224 driver.If i reboot to the older kernel the wireless works.
View 5 Replies View RelatedI just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
I've had a host of problems since upgrading to 11.04 Natty Narwhal, so let's deal with these 1 at a time.
I've got a Hewlett-Packard Pavilion G60 laptop. Next to the power button is a handy wireless on/off button. This has always worked well with previous editions (9.04,through 10.10). first press toggles the wireless off, second press toggles it on.
Not so in 11.04. The toggle off works great, first time. But, it will not toggle back on. Not after any number of tries, not after restarting, not after booting into other OS's (9.10 and Vista) re-enabling it there and then booting back into Narwhal. to further complicate the issue, this feature bypass the network manager, so toggling the wireless off by the switch leaves me showing no wireless adapter in the network manager. I also restarted, switched from Unity to a Gnome session, but the issue still persists.
As my only network options are wireless, this has become a substantial inconvenience.
----
EDIT: so the network util is actually saying "wireless disabled by hardware switch". Also noticed it I enable it in 9.10, reboot to 11.04 (where I inevitably fail to re-enable it), then reboot into 9.10, it will initially be disabled. The key difference is in 9.10 I have the ability to enable wifi using the hardware button. It seems that 11.04 is remembering that wireless is disabled between boots. Is there a place it might be storing this value? If so, I may be able simply to set the value as enabled, since toggling that silly button isn't working.
-----
EDIT 2:
found this thread:"Wireless disabled by hardware switch" bug? - Natty
seems to be a similar issue. I'll be following how that one develops, too.
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
When i click the network manager icon it just says under wireless networks "Wireless network is not enabled" How do i enable it?
View 9 Replies View RelatedI used the windows executable wubii installation for xubuntu 10.04 I'm not dual booting.My problem is all indications in the user interface are selected "enable networking" "enable wireless" and my wireless switch was on throughout and was connected to the internet during the installation in windows.However
Code:
sudo lshw -C network
Returns
[code]....
I am a day old in ubuntu-world, and I am having internet issues. Yesterday, after i had installed ubuntu alongside windows 7. To begin with it did not detect wireless (not networks but wireless itself), so i figured it was something to do with the adapter and came to these forums where many things were suggested. none worked. So I restarted the system for good measure and lo and behold it detected wireless networks and connected to the internet almost immediately.
Now, after a day, when i have logged in to ubuntu again, there is no wireless detected. The same problem. When I right click on the network icon in the notification area i see that Enable Networking is checked but "Enable Wireless" is darkened. There is no way to check it.
Can anybody please advise as to what to do next. I am using ubuntu 10.04 LTS (Lucid Lynx I believe).My system config is i7, 512MB ram.
my computer-toshiba satellite currently running on ubuntu 10.10 i cant connect to wireless except when im at my parents house not to sure why it was working now all of a sudden it stopped while i was using 10.04 figure when i upgraded to 10.10 it would fix it self ..didnt happen so im stumped when i right click on the satelite it the top right of my screen it shows-
-enable networking-(witch is checked)
-enable wireless-(witch willnot allow me to click it)
-enable notifications-(witch is checked)
-connection information- (wont allow)
-edit connections..-
-about-
dont know why it wont allow me to enable the wireless
My wireless can connect to my router without a problem, but in order to do so (after boot) I must first disable networking in the Notification Area and then re-enable it. I don't mind it too much, but when other people use my computer, it's made painfully obvious to me, that this was never an issue with Windows 7 (as much as I despise MS).
View 9 Replies View RelatedAs the title says i updated my system which then needed a reboot. I also installed Mixxx djing software to try it out. So i thought id just restart the system. Usually when i boot into my desktop wireless automatically can connect to my router but not this time, wired only for now... i know theres tons of wireless issue threads but some more experienced users will be able to get straight to the point and run through some diagnostics with me.
View 1 Replies View RelatedI have recently installed ubuntu on my laptop. However I cannot enable the wireless on it. The card is registered and drivers are installed. From reading previous forums i can guess that its because its "Hard Blocked"" (assumptions). However the switch for it is in the on postion.
View 2 Replies View RelatedI have a LG S1 PRO, that to activate the wireless is necessary Fn + F6. How do I enable wireless on command? Since you can not activate in ubuntu with these keys.
View 9 Replies View RelatedWe're on vacation here with free wifi and I brought two laptops. The older of the two laptops running Ubuntu 10.04 and a Broadcom wireless chip suddenly wouldn't work this morning. I checked and it says wireless disabled, however wireless is grayed out when I right click on network manager. I have -no- idea what to do. I've never seen wireless just die like that. I popped open the cover but the wireless card is fine. I re-seated it, booted back up, still no sign of it.
What can I do?
I updated from Ubuntu 9 to 10 some while ago and can no longer connect to the internet via wireless. The computer is a Medion 96290 with a USB wireless card. Running "lsusb" gives code...
This tells me a driver is installed but it may not be the correct one. I copied this driver from the Windows driver file.
Network Manager shows "Wireless Network" greyed out and "wireless is disabled".
WICD shows net8187b as the installed driver and that the hardware is present.
There is a wireless switch on the keyboard which it was not necessary to use in Ubuntu 9 and is inoperative in Ubuntu 10.
I have searched through and applied many suggestions without success and have posted this problem on a couple of forums, again without success.
I have been having some problems with my wireless connection. I am having to start my computer 2 times in order for my wireless connection to work. The first time I start up, even after I enable wireless it wont connect. If I reboot immediately and enable wireless it will then connect. I would like to be able to fix this problem since it has become really annoying to me to have to boot my computer 2 times every time I turn it on. BTW Network manager shows auto-connect, however it also shows i month ago as to the last time the connections were used.
View 2 Replies View RelatedI am newbie at linux and Ubuntu and I have some problems enabling my wireless. I have spent many hours searching for solutions and couldn't find one for me (maybe don't apply it right - I am newbie). I have HP Pavilion dv6, dual boot Win7 and Ubuntu. At Win7 wireless is ok but at Ubuntu I can't enable my wireless adapter, so my laptop can't recognise any wireless network.
View 3 Replies View RelatedHow can I enable wireless injection?
[code]....