browse the internet for about 30min till NetworkManager craps out on me. but it'll come back as " connected " in about 10 minutes time. where i could look at what causes this? would the error be in my logs? iv'e updated each Network Mangler from updates and updates-testing and still dont fix the problem. i know i never had the problem in 0.8.x of NM.
View 4 RepliesI was curious about the constantly blinking HDD led on my netbook, and I found out, that the modem-manager daemon constantly spamming my logs.The affected logs are syslog, daemon.log and debug.he modem-manager service drops a line every 2 second (actual time) to these 3 logfile.It is just a conncetion information, like this:
Nov 19 12:11:04 zwbnoti modem-manager: Duration: 3012 Up: 0 Kbps Down: 0 Kbps Total: 6454 Total: 15560
Nov 19 12:11:06 zwbnoti modem-manager: Duration: 3014 Up: 11 Kbps Down: 3 Kbps Total: 6456
[code]...
I'm getting a timeout error from NetworkManager when attempting to connect to my router/firewall.
Excerpt from /var/log/messages attached.
When I try to login as me - it gets pretty far but then something happens and automatically logs out. This happens in Gnome, Kde too. Now - I have no problem logging in a Root. Is there a way I can try to stop the login process before it kicks me out, or is there a way to look at some files to tell me what's going on?
View 3 Replies View RelatedMy first time to try Networkmanager and I get this error
[code]...
Is there a dependency I missed?
I noticed that on my server, I keep getting the same error flooding my logs:
Code:
We don't use CUPS but I'm sure that package is a dependency of something else. It seems like this is Samba trying to share out to the local CUPS server. How can I disable this from flooding my logs? Samba should not be sharing out any printers at all.
After updating from 11.3 to 11.4 the networkmanager stopped working for me. When I hover over the KDE NetworkManager icon it says Error: Invalid state. If I click it, it says Network Management disabled and checkboxes (Enable networking and enable wireless - both checked). I already tried removing /var/lib/NetworkManager/NetworkManager.state and restarting the network management (/etc/init.d/network restart). Also reinstalling the NetworkManager package.
View 1 Replies View RelatedI have installed opensuse 11.3 I am unable to connect to my wireless connection.
KNetworkManager finds the connection (when i scan for connections), i can enter the WEP Hex key, it says it is configured. Goes through its "check list" when you click "ok", and all seems good. But it won't connect. When i run "nm-tool" i get:
State: unknown
WARNING **: error: could not connect to NetworkManager
I edited values in:
linux-2ys8:/home/sam # vi /var/lib/NetworkManager/NetworkManager.state
to "true"
running rcnetwork restart, output was:
Shutting down network interfaces:
eth0 device: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
eth0
[code]....
knetworkmanager(9276): KUniqueApplication: Cannot find the D-Bus session server: "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
knetworkmanager(9275): KUniqueApplication: Pipe closed unexpectedly.
Is there a tool already out there that will split error logs based on the virtual host they belong to? Or perhaps a somewhat simple way to write a script that can do this? I'll keep looking for a solution but I thought I'd ask in case someone here has one to offer.
View 2 Replies View RelatedI've been trying to create a RAID5 array with 4x1TB disks.
I'm using Ubuntu 10.10, uname output:
Quote:
Linux dynamips 2.6.35-22-server #33-Ubuntu SMP Sun Sep 19 20:48:58 UTC 2010 x86_64 GNU/Linux
I have two of them connected to the on board ICH7 SATA controller (sdb and sdc), and two of them connected to an external Silicon Image SiI 3132 controller (sdd and sde). sda is my boot disk split into several partitions and is also connected to the onboard SATA.
Everything is working fine before I create the array, here are my hdparm outputs:
Quote:
/dev/sdb:
Timing cached reads: 2958 MB in 2.00 seconds = 1478.89 MB/sec
Timing buffered disk reads: 360 MB in 3.02 seconds = 119.35 MB/sec
/dev/sdc:
Timing cached reads: 2940 MB in 2.00 seconds = 1469.77 MB/sec
code....
When i try cd of ubuntu 10.10 over win7 ultimate. many ways many things i try test but nothing work out. finally i am sending this logs wubi files.
View 1 Replies View RelatedI don't mind that apache logs "rotate". By that, I mean that periodically the most recent log is renamed "*.1" and the older logs are bumped up a number In my particular situation, I do mind that the log that was "*.4" is deleted rather than being renamed to "*.5" when that periodic renaming happens.
I know most of the other /var/log files have the same behavior. What does this? Can I change it so my apache logs are "rotated" up but aren't deleted? I know this will take some hard drive space, but I have a lot of it.
EDIT: CentOS 5.3, kernel 2.6.18-128.1.6.el5, Apache 2.2.3
just upgraded fc12 -> fc13 with preupgrade. all seems well except for network manager icon missing from the systemtray and therefor unable to connect to wifi. uninstalled network manager and reinstaled but to no avail. wifi is a bcm4318 airforce one btw, broadcom kernel stuff is loaded but maybe in fc13 its supported in the kernel now?
View 4 Replies View RelatedOn our app server the logs from the Sybase Mobilink service get logged to /var/log because of that I did a chmod a+rx /var/log and all is well until.... the next day QA logs in goes to check the logs and gets:
Quote:
qa@dwdb [~]$ ls /var/log
ls: /var/log: Permission denied
qa@dwdb [~]$
I have no problems seeing the networks available and connecting to a network in KDE. But there is no network manager in GNOME. I might have messed up with the settings earlier. What I can do though is run knetwork manager every time I start up (or add it to start up programs). But that opens up the KDE wallet which would rather avoid.I am thinking I need to install something related to NetowrkManager.
View 2 Replies View RelatedI just upgraded (as a fresh install) to Fedora 13. In so doing I kept the old /home partition. My NetwokrManager Applet is missing from the top bar. But if I login instead as a different user, then it is there. When I did the install, I had to create a (new) user as part of the process. The old passwd file had two users, one called admin, and the other myself. I logged in initially as the new user, and created the admin user keeping the same home directory, user ID and group ID. I then logged out, logged in again as admin, and removed the new user. I then added myself as a user keeping the same home directory, and user and group IDs.. For some reason admin has the applet but I don't. I also don't see how to add it except as a custom laucher using nm-applet, and that didn't seem to work.
View 2 Replies View Relatedif the NetworkManager uses wpa_supplicant? I normally dont use NetworkManager and decided to try it. I started it and tried it out and it works with WEP and WPA! I cant figure out why using the iwconfig command is not working by itself for WEP. WPA working with NetworkManager is just a bonus though.
View 4 Replies View RelatedI seem to be having this problem with Fedora 14:
[URL]
My wireless device is an Intel Ultimate N WiFi Link 5300, driver is iwl4965. Post-suspend I see exactly the same messages as in that Ubuntu report. Restarting NM does not help.Is there a way to lengthen to timeout or kick the device in to life some other way?
I'm an inordinate amount of trouble getting F15 to run without NetworkManager. If I boot with the NetworkManager service enabled, my NIC presents as expected at /dev/eth0 (I'm using biosdevname=0). However, when I stop the NetworkManager service, /dev/eth0 disappears from the filesystem.If I boot without NetworkManager enabled, /dev/eth0 is never created. Reviewing dmesg, udev is loading an ethernet driver.
View 1 Replies View RelatedI've always used the network init service to manage my network interfaces on headless servers and used NetworkManager on desktop installs. Lately it seems that NetworkManger is becoming more and more integrated into network management even on servers. I have a RHEL6 server in my lab that runs NM without any Gnome components installed and I've noticed in Fedora NM becoming more tightly coupled with the system-config-network related services.
I'm asking because this is a "highly connected" server, with two redundant NICs on each of two different networks with a bond interface associating each pair for redundancy. Every time the server reboots it fails to configure its default route correctly. I know how to configure the network using the standard /etc/sysconfig/network and ifcfg-* scripts. Is NM fully integrated with these configuration files?
I have a web server running and its generating lot of logs daily. Currently, Iam manually zipping last 2 days log files and moving them to a different folder called "old logs". Iam keeping them there for 5 days for any reference and eventually deleting them.
View 1 Replies View RelatedI loaded F10 up on my laptop a few nights back. NetworkManager connects via Ethernet just fine. It will also connect wirelessly, but only when security is disabled. I've been using 128-bit WEP.
When I try to connect using security, this is what appears in the log:
Code:
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
[Code]......
after fiddling around with compiz-fusion and KDE, my network suddenly disappeared. I looked in the package manager and apparently I don't have the gnome applet for networkmanager...but everything else I seem to have (the git version not svc or w/e) Anyone know if installing the applet will let me choose my wireless network and connect to it? Right now I think so, but what I have to do is boot into windows, find the package on the web and download it, then boot into fedora and install it
where I can find the fedora 10 networkmanager-gnome package (git version for x86_64)? I looked around and found the svc version and a git version for i386, but my OS is x86_64 and I couldn't find any git versions of it for 64-bit fedora's. btw, I have no idea what git and svc mean, but when I tried to install the svc version, it told me I had to install svc versions for all the other networkmanager packages...
I recently installed F10 x86_64 on my Lenovo T61 laptop, and while I'm quite pleased with F10, I am having a difficult time with my wireless card. I spent most of yesterday searching for a solution, but none have presented themselves. Scenario: I am trying to connect to a HIDDEN SSID with NO ENCRYPTION (work Wifi, don't ask) using network-manager and its associated applet.
Symptoms: I left-click on NetworkManager, select "Connect to Hidden Wireless Network", enter my information, NetworkManager does a few things, and finally I'm told that NetworkManager cannot connect to my network.
[Code]...
I have just installed Fedora 10 on an old laptop and was quite impressed with how smoothly it all went ... until it came to setting up networking!
I have battled for three days now and I'm almost there;
- installed updated firmware to the built in Broadcom 4306 wireless network adapter
- got NetworkManager to work with a static ip address by manually editing the ifcfg-wlan0 file
- managed to get the WPA security to work
The only problem I am left with is that there is no default route; if I set one up using: ip r a default via 10.1.1.1 dev wlan0
Then everything starts working.
If I try to add routes using the NetworkManager gui interface they dont get saved (no suprises there then! ).
I have tried creating a route-wlan0 file in /etc/sysconfig/network-scripts/ but this seems to be ignored by NetworkManager.
Since the NetworkManager GUI is almost useless, does anyone know if there are any other configuration files I can manually modify to get a default route set?
Just upgraded from Fedora 10 to 11 and cannot setup wireless connection via NetworkManager. By some reason it doesn't store WPA key. There are following errors in the message log:
Code:
Aug 14 14:37:05 mike-dev NetworkManager: <WARN> connection_get_settings_cb(): connection_get_settings_cb: Invalid connection: 'NMSettingConnection' / 'uuid' invalid: 1
Aug 14 14:37:11 mike-dev NetworkManager: <WARN> wait_for_connection_expired(): Connection (2) /org/freedesktop/NetworkManagerSettings/2 failed to activate (timeout): (0) Connection was not provided by any settings service
Every time KDE starts, it pops up a message saying that 'another network manager is running', how can I prevent NetworkManager from starting?
View 3 Replies View RelatedIs there a way to force the NetworkManager to bring up the interfaces right way. I have a service( postgres ) that needs to have a network interface up when it starts. Right now it is not even through I have the box check to have the network interface active on boot up.
View 1 Replies View RelatedI'm having trouble booting after a recent bunch of updates (haven't been able to boot F12 from hard disk for a couple of days). The boot process gets as far as "NetworkManager daemon [OK]", then just stops. I get this for all 3 kernels that I can choose from the grub menu (2.6.32.16-141, 2.6.32.14-127, 2.6.32.12-115)Mounting the hard drive with a liveUSB, a quick inspection of /var/log/messages reveals that things go smoothly until: etc. until I hit the power button.I ought to mention that I wireless card that requires the Realtek RTL8192SE driver, which requires
Code:
sudo su
make
[code]....
Fedora 13 64. NetworkManager tries to unlink /etc/hosts and is blocked:
Code:
SELinux is preventing /usr/sbin/NetworkManager from unlink access on the file /etc/hosts.
Additional Information:
[code]....