Is there a tool already out there that will split error logs based on the virtual host they belong to? Or perhaps a somewhat simple way to write a script that can do this? I'll keep looking for a solution but I thought I'd ask in case someone here has one to offer.
View 2 RepliesI try to log all my iptable logs to mysql instead just a logfile. The setup is as followed:
[Code].....
[red]Problem[/red] rsyslog logs everything correct, except it does not log to db, it logs to /var/log/messages. As I am brand new to the whole Linux experience, I don't get it. My /etc/rsyslog.conf is setup with $ModLoad onmysql.
I've got this log file and I need to get all sorts of information from it...
24 - [02/Sep/2010:00:01:16 +0200] - 10.1.53.62 - 200
23 - [02/Sep/2010:00:01:26 +0200] - 10.1.53.62 - 200
19 - [02/Sep/2010:00:01:56 +0200] - 10.1.53.62 - 200
[code]....
i am trying to run xterm command in linux.it opens one pop-up window and closes when we close that terminal.I want to store it like a file.
$ xterm -l -lf "test"
but test is not storing any where? how to configure this?
When i try cd of ubuntu 10.10 over win7 ultimate. many ways many things i try test but nothing work out. finally i am sending this logs wubi files.
View 1 Replies View RelatedCurrently we are using Unix machine & the activity are logged in the file using following code used in profile
.profile code
# /ln/aud_root/dds_ibm/.profile
trap 'print "not allowed"' INT
trap 'print "not allowed"' QUIT
trap 'print "not allowed"' TSTP
[Code].....
I am using a custom OpenVPN install using 7zip. It installs the program and unzips the keys and configuration files to the correct location. This is being installed by an administrator and needs to work for non admin users. Before there was an issue about not pushing the routes correctly and I am going to get around that by adding the users to the Network Config group which will allow them to add routes but not a whole lot more power. Now I am getting the error "Error opening logfile for writing C:Program FilesOpenVPNlogclient.log.
You probably don't have administrator privileges, which are necessary to run OpenVPN." Is there anyway around this? OpenVPN still works even though this error occurs so is there anyway to just turn the error off (changing verb to 0 does not work) or recompile it to ignore this error? Is there anyway to change the logging location to event viewer or another directory such as C:Users\%currentuser%OpenVPN.log (when I try to do this with log or log-append option it throws another error and doesn't work so I would prefer event viewer so there wouldn't be any permission issues).
I noticed that on my server, I keep getting the same error flooding my logs:
Code:
We don't use CUPS but I'm sure that package is a dependency of something else. It seems like this is Samba trying to share out to the local CUPS server. How can I disable this from flooding my logs? Samba should not be sharing out any printers at all.
Im in a unique situation where a box has a 400G file, on FreeBSD, without thesplit' utility available
View 11 Replies View Relatedbrowse the internet for about 30min till NetworkManager craps out on me. but it'll come back as " connected " in about 10 minutes time. where i could look at what causes this? would the error be in my logs? iv'e updated each Network Mangler from updates and updates-testing and still dont fix the problem. i know i never had the problem in 0.8.x of NM.
View 4 Replies View RelatedI've been trying to create a RAID5 array with 4x1TB disks.
I'm using Ubuntu 10.10, uname output:
Quote:
Linux dynamips 2.6.35-22-server #33-Ubuntu SMP Sun Sep 19 20:48:58 UTC 2010 x86_64 GNU/Linux
I have two of them connected to the on board ICH7 SATA controller (sdb and sdc), and two of them connected to an external Silicon Image SiI 3132 controller (sdd and sde). sda is my boot disk split into several partitions and is also connected to the onboard SATA.
Everything is working fine before I create the array, here are my hdparm outputs:
Quote:
/dev/sdb:
Timing cached reads: 2958 MB in 2.00 seconds = 1478.89 MB/sec
Timing buffered disk reads: 360 MB in 3.02 seconds = 119.35 MB/sec
/dev/sdc:
Timing cached reads: 2940 MB in 2.00 seconds = 1469.77 MB/sec
code....
I don't mind that apache logs "rotate". By that, I mean that periodically the most recent log is renamed "*.1" and the older logs are bumped up a number In my particular situation, I do mind that the log that was "*.4" is deleted rather than being renamed to "*.5" when that periodic renaming happens.
I know most of the other /var/log files have the same behavior. What does this? Can I change it so my apache logs are "rotated" up but aren't deleted? I know this will take some hard drive space, but I have a lot of it.
EDIT: CentOS 5.3, kernel 2.6.18-128.1.6.el5, Apache 2.2.3
When I try to login as me - it gets pretty far but then something happens and automatically logs out. This happens in Gnome, Kde too. Now - I have no problem logging in a Root. Is there a way I can try to stop the login process before it kicks me out, or is there a way to look at some files to tell me what's going on?
View 3 Replies View RelatedI think I miss something here(Ubuntu 9.10 server 64bit):
/etc/srg/srg.conf
Code:
##### SRG Example Configuration File #####
# Squid log file to process
# Defaults to access.log in the srg directory.
# e.g. log_file "/usr/local/squid/logs/access.log"
[Code].....
WARNING: Configuration file not found!
No logfile lines found to process!
I was using sftp to pull a file from a system and the transfer aborted with the message:
Code:
Received message too long
followed by a large number and I was kicked all the way out to a shell prompt.
Anyone know what problem might have caused this? I was using the Cygwin's sftp when this happened.
The file I was getting wasn't very large (5.5M) and certainly nowhere near the largest I've grabbed using sftp. Luckily the remote system was 'IX and I was able to dust off my memories of the "split" command (before USB drives became common, "split -b 1400k" was burned into my synapses) and reassemble the file once I got all the chunks transferred. Still, having to do this is weird.
I'm trying to upload my tar'ed site to server but I have upload limit. My ftp program extracts tar after uploading it. How do I split this one tar into two so I could upload one tar and let it extract itself, and then upload second one and let it extract itself too?
View 1 Replies View Relatedwhen I run the following command:
awk -F, '{print $10 "," $5 "," $1 "," $3 "," $4 "}' myfile > tmpfile
tmpfile displays the lines but they are all cut off and placed on the line below at the same point.
i have a folder of size 50 gb in my fedora 13 system. i want to split the folder into 5 pieces of size 10 gb each. how to do that? purpose is i am going to gunzip this folders seperately and going to write in dvds
when i attempted to gunzip that 50 gb folder,i got 12gb tar.gz file which is not equal to the size of a dvd. then i dont want to split that file.
In an attempt to get something that, well, you know, just works... I migrated a laptop to Karmic server today. Which works fine, except for one thing: when I use wvdial and a Huawei E160g USB modem to connect to the Internet (which is the only option out here in the sticks where I live) no default gateway is set. When I add one manually everything is fine, except that the default gateway keeps disappearing after a while (at irregular intervals, as far as I can see). Nothing appears in any logfile that even mentions the default route, let alone a reason for its magical vanishing trick. My wvdial.conf is fairly pedestrian:
[Code]...
What's going on here? I'm stumped. And the mighty Googlebrain doesn't seem to know, either. How do I get wvdial & friends to set the correct default route upon connecting? Given the fact that without a default route a PPP connection to a remote network is little use, I would expect this to be a standard feature and not something that I'd have to script a work-around for myself. But then, I have been wrong before. Secondly, and more importantly, why does my default route keep disappearing without a trace?
Is there a way I can redirect messages from kernel ringbuffer to a logfile, e.g. with rsyslogd? With redirect I mean that the messages do no longer appear in dmesg, but only in the logfile.
In my case that should be iptables log messages.
Im running a dedicated game server for ArmA-II. There is a server.cfg file that directs the server to output to a log file all server events, such as game issues from clients and the server itself.The value in the server.cfg file looks like this: logfile="server.log";How do I set it up so that the dedicated server outputs this information, not only to the log, but also to my screen? Would this be done from the server.cfg file?
View 1 Replies View Relatedif I use the final flag, postfix loggs to /var/log/messages, not to /var/log/maillog.What I am doing wrong?regards ralfHere my config:
options {
sync (0);
time_reopen (10);
[code]....
I have a 7 GB VOB file which I created from a DVD using ffmpeg dump to remove CSS protection (it is legal where I live to do so). Now, I want to create a DVD/.iso that will be understood by regular DVD players/appliances. How do I do it?
View 1 Replies View RelatedHow can I split a line in vim into 2. example :
original line :
welcome to linux questions
after splitting :
welcome to
linux questions
Is there a single key strike through which i can do it ? like going to the word "to" and striking that key will put rest of the words in new line. ( i want to do it in normal mode , not in the usual insert mode where it obviously can be done by typing <Enter> )
i have created two physical volumes, later added volume group to it and then created logical volume and formated the logical volume n mounted it on directory now now i wanted to split the volume group but am unable to do it.If i tries it error msg displayed as existing volume group is active and i have to inactive that volume group
View 4 Replies View RelatedMy server is running Red Hat 4.1.2-44.I am having an issue with it hanging (website doesn't respond, can't connect via SSH (it's a remote server)) after 4am on every 3rd Sunday or so.A reboot is required to get the server responding again.I have checked every logfile I can find and found nothing that helps me. The thing I have noticed is that some of these log files start afresh after the reboot so my initial thoughts are that it is a logrotate issue or something similar.
The last activity I can find before the reboot (at 8:32) is in the logfile /var/log/cron:
Mar 28 04:22:01 crond[9356]: (root) CMD (run-parts /etc/cron.weekly)
Mar 29 08:32:39 crond[3884]: (CRON) STARTUP (V5.0)
[code]....
After struggling and googling on the internet I can't manage it to work.I have stup rsyslog to receive the logging from my firewall and it puts it into the syslog file.ut I would like to have a separate logfile for these messages.I have created the firwall.log file with owner syslog, same as for the syslog file.I already have tried to use in the /etc/rsyslog.d/10-firewall.conf the following ::msg, contains, "firewalld" /var/log/firewall.logor
:msg, contains, "firewalld" -/var/log/firewall.logI don't know the difference between the "-" sign in the lines but I have seen also those kind of situations.
I also have put this line into the 50-default.conf file because I thought it wasn't seeing the 10-firewall.conf file but no work.I have added a $template HostMessages, "/var/log/%HOSTNAME%/logfile.log" in the /etc/rsyslog.conf file but neither it works.In the firewall I can see the Syslog facility is now on LOG_LOCAL0 and I can change it from LOCAL0, LOCAL1, LOCAL2, ... until LOCAL7What does these different numbers mean
How can I split an output of a command to two terminals? one will get stdout and the other will get stderr. The best I could do is:
On first terminal code...
This works ok but it prints the errors over and over again every time, is there any better way to redirect the errors to another terminal?
I have a file with 5 columns. Column 4 contains numbers.Is it possible to split the file into multiple files using a condition for the contents of column 4 i.e if column 4 contains a value between 0-10 then print the lines to a new file called less_than_10.txt
View 1 Replies View RelatedI have a text file of n-number of tab-delimited lines ("INPUT") which I would like to parse line-by-line to a text output file depending on the SampleID of the line. These lines contain a unique SampleID and each subject has several lines of data.
[code]....
I also have a text file of relevant SampleID ("INPUT2"). The basic idea is that I read a line from INPUT, split the tab-delimited line, extract the SampleID from the split line, compare the SampleID of this line to my list of relevant SampleIDs. If there is a match, then print the line from INPUT to OUTPUT, then move on to the next line of INPUT. Alternatively, if there is no match, then move on to the next line in INPUT. I tried to script this (extreme newbie at perl right now) and failed miserably, but here is what I have at the moment:
[code]...