I'm installing FC 11 via Live CD and it does not detect the drive...? However I can create and delete partitions with fdisk without problem...? The BIOS detects the drive without problem.
Hardware
Supermicro Server.
Single 80 Gig IDE drive.
My FC13 install has been corrupted by a ram problem. Now I have broken packages to repair if I want to recover.
My question: if i boot from live cd, will I be able to fix the hard-drive install using yum connected to internet?
I've installed F10-live.iso onto a usb key but am having problems with the non-privileged user I created. When I login as kurt, I do not have access to my home directory on the hard drive. I tried [root@localhost home] #chmod kurt kurt (after cd-ing to the correct spot), but still cannot access my files there. I can do so as Live System User, but not as me.
View 2 Replies View RelatedThe disk I obtained from a seller runs fine in live mode (no installation) on my Windows XP. I liked what I saw. However, when trying to run cd live on my Linux PC it won't run. Linux pc currently has Kubundu 9.1 installed. Previous to that I had Mint 8 installed, but again Fedora 12 cd would not run. After getting an initial Fedora startup screen, I next receive a bunch of text, ending with a text screen of about 30 lines with "OK" in green to right of each line. At bottom is blinking cursor. That ends my machine's live running of cd.
Obviously, if I can not get cd to run live on linux pc, I'm not going to be able to install. (I should add that ubuntu, kubuntu, mint 8 and pclinuxos all ran successfully live on machine and three of them were installed successfully.) Perhaps, Fedora is at war with Ubuntu et al.
I tried to use Grub to boot the Fedora 14 Live CD from its ISO image (SHA256 verified) on the hard drive. I put Fedora-14-x86_64-Live-Desktop.iso in the root directory of the FAT32 partition D: (sda5) then extracted isolinux from this ISO, and put it on D: I followed the isolinux.cfg file, and wrote a menu.lst as follows:
title Fedora 14 Live CD
root (hd0,4)
kernel (hd0,4)/isolinux/vmlinuz0 root=live:CDLABEL=Fedora-14-x86_64-Live-Desktop rootfstype=auto ro liveimg quiet rhgb
initrd (hd0,4)/isolinux/initrd0.img
However Grub told me: No root device found. Boot has failed. Sleeping forever. Here's the contents of isolinux.cfg:
[Code]...
I am trying to run ubuntu 10.04 from a usb drive like a live cd so I can test it before I use it. I have made my external hard drive active so that it will read, but i am not sure what to do next. I have put iso on the active partition however when I try to boot from the external hard drive it says boot mgr missing.
View 3 Replies View RelatedI am going to set up Linux on a USB Flash Drive and want to either install to the drive or run a Live Distribution from it since I want to stay with the distro I have on my hard drive.What size or type of drive should I use? I have access to a Corsair Voyager 16GB. Is 16GB enough and would the speed of it be enough?I have seen other drives such as the OCZ Rally 2 which have faster write and read speeds.
View 1 Replies View RelatedInstead it gives, initially: 'memory for crash kernel not within permissible range' I have 2gb memory on a personal system. Then it gives a screen of commands, or something, followed by: ' kernel panic; not syncing fatal exception
View 10 Replies View RelatedIs it possible to install CentOS 5.4 on a USB Flash Drive to boot from or even a LiveCD? I know with OpenSUSE 11.2 there is a LiveCD version and Ubuntu can be booted this way.
View 1 Replies View RelatedI have searched but have not found a successful way of generating a USB drive with persistence using Debian 8 Live USB.
I have an 8 gig USB drive that I would use 4 gigs for the persistent drive.
I just install Gnome live 5.0.6 on a USB thumb drive and would like to know how to save my setting?
View 5 Replies View RelatedI just setup an old computer with Suse 11.3. My goal is to store all my movies and stuff on the Suse box and access them through my home network. I have 11.3 installed, got the network setup and working, can access the internet, access files to/from my laptop to Suse box, and can even access movies/files on the Suse box from my WD Live media box. The problem is: when I add an external drive to the Suse box my WD Live does not totally 'see' it. he external USB drive is accessable on the Suse box as I've moved files to and from this external USB drive. The drive is a WD MyBook. I setup sharing in Samba and the WD Live sees the drive but cannot see the files. Is this a permission thing? Pretty sure I setup Samba correctly as I share several directories in the Suse box.
View 3 Replies View RelatedI have a couple of laptops without hard drives lying around; and I'd like to use them with ubuntu studio. Ubuntu studio doesn't have a live image, so I can't use any of the millions of "copy live-cd ISO to usb" instructions I'm finding all over the web. I only want to use them with creox, but I figure I'll need the real-time kernel as well.
View 1 Replies View RelatedFor some reason, Ubuntu 10.4 LTS cannot boot normally, so I have reverted to a live CD, no concern, I can just reinstall, what I am concerned with is the fact that I get my music. I load up the live CD, and I am able to access my hard drive, but I as I found my music folder, I cannot copy and past and/or move ANY folders into a flash drive. It says I do not have permission.
View 3 Replies View RelatedI have a big problem with my ubuntu linux.. last night i was trying to execute a windows aplicacion (with wine).. suddenly the pc turned off.. later i turned it on but i couldnt enter to ubuntu... now i want to format my pc but i need to save some files on my flash drive.. because i cannot enter to ubuntu so i can save those files.. I used the Live CD, actually im using the live cd right now... the problem is that i dont know how to acces to my hard drive so i can save those files. every time I try to acces, this error appears...
Unable to Mount Location
DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
I tried with right click>Mount... but this error appears..
Unable to Mount Location
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
How do you access a floppy drive from linux dsl live?
View 11 Replies View RelatedI have downloaded the live iso and i was wondering if i could use usb drive (8GB) as a boot instead of burning a disk?
View 6 Replies View RelatedI just tried Centos 5.2 Live starting from a 2 GB USB flash drive. Everything seems to run fine, fast, stable - except for that the persistent feature is not working. I created the USB from Windows using the Centos 5.2 LiveCD image and the current version of Live USB Creator (3.7), and declared a 256 MB persistent space.
This persistence feature had worked before with Fedora 11 but the system resulted unstable, kernel panic.... Now Centos has been solid for hours in a row... but the file where persistence should be reflected remains untouched with the initial creation timestamp. When rebooting, every change in config, file created etc gets lost.
Can you install a live cd onto hard drive? I'm in a live environment now and don't see an install option.
View 10 Replies View RelatedI am trying to install Debian Live to a 4 GB flash drive. I am using UNetBootin to extract this (debian-live-6.0.1-i386-gnome-desktop.iso) file to a FAT32 partition on my flash drive. It installs fine, and shows me the SysLinux menu fine, but when i choose live(or anything else) it says"Invalid or Corrupt Kernel Image". I also tryed these other installers. pendrivelinux's Universal USB Installer. It gives me the same message. win32diskimager gives me a different Debian menu, but the same problem. Does anyone know what is wrong, and how to fix it. It is driving me nuts!
View 11 Replies View Relatedi have downloaded the gnome live cd. how do i install it using a usb pen drive?
View 1 Replies View RelatedI have an 8GB Sandisk Cruzer, which reportedly works just fine booting Linux. It does have U3 still present on one of the partitions, but this should not pose any problems either. I also have a 2GB FAT32 partition for storing Windows stuff. The rest (5.7GB) I have reserved for Ubuntu. Windows reports this as an active partition, and the Ubuntu boot CD reports this partition as dev/sdb5. I have installed Ubuntu from the Desktop CD to the USB partition using the guided install (largest continuous free space) and selected the boot (grub) location on the same partition (sdb5), as I'd rather not modify my existing windows bootloader. A 300MB swap partition also exists on the drive. When I attempt to boot the USB drive from either my laptop (Inspiron 1505) or desktop (Abit IP35 Pro), only a blinking dash (or underscore) appears with no LED activity on the flash drive. Could it be that the MBR of the flash drive needs to be aware that the grub install is located at sdb5?
View 1 Replies View RelatedI wanted to keep kon-boot and ubuntu live on USB drives instead of CDs for the ease of carrying around. I wonder if its at all possible to put both tools on same USB drive instead of keeping them on two separate ones?
View 3 Replies View RelatedCan someone tell me how to do this? I just formatted a slaved drive for EXT4 and now I'd like to write grub over the MBR. Cannot really find much on Google. tried: grub-install /dev/sda1 and of course didn't work....
View 5 Replies View RelatedI have a friend of mines computer that is hosed and gets the BSOD. He has pictures of his grandson on there that her really needs before I fix it. Is there a way to mount the main windows partition while running the Live CD? I have tried it and get an error but I am not able to get it working.
View 5 Replies View RelatedHave not found this elsewhere so here goes.
I had a friend ask how he could do his electronic banking without a chance of any information being left on his computer once he is done.
I thought of a Ubuntu live CD but have seen the HD activity light flashing when using one. That leads me to believe that some kind of use is made of the HD and that makes a live CD questionable. He wants no information on the HD even in unassigned sectors.
Maybe, better yet would be a USB thumb drive that runs Ubuntu or another distribution that will not use the HD or even require that one be in the computer. A plus with a thumb drive would be that it would only be available on the computer when it is being used so it could contain passwords etc. Of course, it would have to be removed when not in use.
I decided to install Maverick on another PC in the house. I downloaded and burnt the 10:10 live CD three weeks ago and installed it on my laptop without problem.
Now when try to install on this it read the CD as first boot device, goes to the language selection, and then the "try without installing/Install/check disk" etc. I select either "install" or "try without installing" and after s few seconds the drive spins down and thats it...nothing more happens.
I know the CD's fine as I already installed with it and the PC in question currently has a working version of Karmic on it. PC is an Acer L100 and the CD is the 32 bit version.
Update: After posting this I've played around a bit more. It seems most attempts it doesnt want to read the Live CD at all. After trying to boot from it and displaying the copyright line "isolinux..." it jump straight GRUB and boots my present OS. I've just tried the Karmic CD too and the same thing is happening. So maybe points to a problem with the CD drive??
I'm mostly a linux-idiot but I tried to get an update for a laptop that was running xubuntu. Anyway, it won't boot and instead takes me to a screen where it says "press s to skip mounting, or press m to recover manually" or something like that. I've pressed S, and then it tells me that it can't find /tmp or something, and I have to turn it off and back on to do anything. Pressing M doesn't help much either... at least not for a mostly-linux-idiot like me. I would do a clean install, but there are a few files I absolutely have to have from the hard drive. recover the files I need from my hard drive to a usb drive while using a Live CD?
View 9 Replies View RelatedI have just finished building a new computer and it booted with no problems from the hard drive to ubuntu 10.10 (it was a hard drive from a previous computer and had ubuntu installed). After less than a minute though it froze up completely. I restarted and now cannot get ubuntu to boot. I get to GRUB with no problems but when I try to boot ubuntu I get a black screen with a blinking cursor in the top left corner and it hangs indefinitely.
I tried to boot from a live cd to see if there was anything I could do but I get as far as the screen to choose "Try Ubuntu" or "Install" and both choices leave me on a black screen with the mouse icon. I can move the mouse but nothing else. I have tried the Ubuntu 10.10 32 bit, 11.04 64-bit, 11.04 32-bit and even Mythbuntu, which I had on a cd from a magazine. I get the same result with all of these.
On the other hand, OpenSUSE 11.4 boots from the Live CD fine and I installed it and it boots from the hard drive. This is good news but I would much prefer Ubuntu, as I'm more used to it. Am I doing something wrong or have I any hope?
The computer specs are:
Processor: AMD phenom II X2 555
Motherboard: Asus M4A88TD V-EVO
Memory: G-Skill Ripjaws 4GB Dual channel
Hard Drive: Seagate Barracuda 200GB
A recent update messed up my Ubuntu (actually Xubuntu) laptop, and so I want to recover a few important files off of it before reinstalling the OS.I cannot boot into Ubuntu on my hard drive, so I put in one of my Live CDs, but couldn't figure out how to get the files from my hard drive.I googled the problem, but all the solutions talked about recovering Windows files with a Live CD.I need to recover my files that were in Ubuntu
View 4 Replies View Related