Fedora Installation :: Porting 9.04 Xorg To F13?
Jul 7, 2010
My problem is I own an HP2133 with via graphics. These drivers are very poorly supported, both open-source and proprietary drivers F13 runs quite nice on that machine, but playback of videos or flash lacks much perfomance.Proprietary drivers are only provided for Ubuntu and that only for 9.10 by VIA until know. With these drivers Ubuntu 9.10 is able to playback flash/videos quite good. But Ubuntu (9.10) brings a few annoying bugs, which do not seem to be fixed, that is the thing I do dislike with this ditstro. I pushed my luck and tried these drivers with F11/F12, but they did not work due to differences in xorg version. In F10 it was possible to use 8.04 VIA drivers, but F10 has EOL and is besides flash playback considerably slower than later Fedora releases.
So I thought using alien or similar tools to convert the xorg packages from Ubuntu 9.10 into rpms and install these to a F13 release.... (Like downgrading to an older xorg like it was necessary in F9 for ATI cards ...) As the VIA drivers did not work with earlier version of Fedora, I had the idea porting Ubuntu's xorg to Fedora that way.Before I start spending a lot of time on this, I would like the freaks and neerds around here, if this to your opinion could have any chance of success.
View 1 Replies
ADVERTISEMENT
Jul 27, 2010
I realize that I ask for a rather crazy thing . My problem is I own an HP2133 with via graphics. These drivers are very poorly supported, both open-source and proprietary drivers F13 runs quite nice on that machine, but playback of videos or flash lacks much perfomance. Proprietary drivers are only provided for Ubuntu and that only for 9.10 by VIA until know. With these drivers Ubuntu 9.10 is able to playback flash/videos quite good. But Ubuntu (9.10) brings a few annoying bugs, which do not seem to be fixed, that is the thing I do dislike with this ditstro. I pushed my luck and tried these drivers with F11/F12, but they did not work due to differences in xorg version. In F10 it was possible to use 8.04 VIA drivers, but F10 has EOL and is besides flash playback considerably slower than later Fedora releases.
So I thought using alien or similar tools to convert the xorg packages from Ubuntu 9.10 into rpms and install these to a F13 release.... (Like downgrading to an older xorg like it was necessary in F9 for ATI cards ...) As the VIA drivers did not work with earlier version of Fedora, I had the idea porting Ubuntu's xorg to Fedora that way.
Before I start spending a lot of time on this, I would like the freaks and neerds around here, if this to your opinion could have any chance of success.
View 1 Replies
View Related
Oct 8, 2009
Error: xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-catalyst conflicts with xorg-x11-drv-nvidia
I have followed the guide to install ATI proprietary drivers using RPM Fusion.
View 3 Replies
View Related
Mar 6, 2010
First thing I do when I install fedora is to customise a few things: default font sizes, number of workspaces (an their names), icons on the gnome panels etc. I was wondering if there is a way that I could just copy some file from my old install to the new one that would save me doing this manully each time. I think the main things I need are customisations done in System->Preference->Appearnece and customisations to the GNOME Panels
View 1 Replies
View Related
Sep 29, 2010
I am a software developer, presently porting a game engine from Visual Studio to GCC. I'm working on LTS 10.04. The project uses C++ lambdas, and I really would like to keep it this way. Therefore, I need GCC >= 4.5 to compile it.
I wouldn't like to reinstall entire OS, or to have to manually update this single program every time. Is there an option to update it from 10.10 repositories, pointing out, that I need only this package (and it's dependencies)? Or is there any PPA that does the trick for me?
Generally, the entire packaging system of Ubuntu rocks, as long as I can find up-to-date PPAs of all packages I need to have in recent versions (like mono).
View 3 Replies
View Related
Jul 17, 2009
i'm new to MySQL and i designed a database using MySQL and PHP recently but dont know how to port it to my host company. How do i save the database on my flash drive then transfer to my host on my website's control panel.
View 1 Replies
View Related
Feb 26, 2009
Is it possible to import an xorg.conf file from Debian to Fedora and have it work? The reason for this is that I have an older monitor that only offers 800x600 as the maximum resolution.
View 2 Replies
View Related
Dec 6, 2009
I have just installed Fedora 12 (64 bit), and I'm having troubles getting it working on my widescreen LCD TV. Before I installed the nvidia driver, it worked fine. After I installed the nvidia driver, it showed output on the screen until it gets to the logon screen (I never actually see the logon screen), where it goes black.
I'm assuming this is to do with my xorg.conf file, but I cant for the life of me work out what I need to change. I have been playing with all sorts of options, with no success.
View 4 Replies
View Related
Nov 20, 2010
I plan to do a minimal install and then install xorg and fluxbox. I'm not familiar with the way fedora names it's packages. what packages I need to install to get a working xorg. This is just a regular install on a home system with no special needs.
View 14 Replies
View Related
May 27, 2010
Just have F-13 32 bit installed. But can't find xorg.conf. The screen resolution is only 800x600. The LCD display and the video card can support 1640x1280. Please where can I find a standard xorg.conf. Or how to create it here?
View 14 Replies
View Related
Nov 6, 2010
After loading all the apps I use last night with a working FC14 x86_64, I powered up this morning and nothing happened after starting atd.1 try an alternat kernel same effectstart in init 1, OK go to init 3 OKran startx .. failedlook for xorg.conf.. no fileNow if Iwas still running mandriva , I would have typed mcc and bought up the control panel so I could have sorted out the Xorg problem, or tried. There really needs to be something like this.I found that gdm was not installed so installed it.It will now boot up to the login screnn, but wont accept my passwd.restart in init 3, login as root and add another user and set the password for that user.I also rest my passwd as welll.boot up again and get authentication failure on both users, and I cant login as root as someone removed that feature.
Also I can't use Ctrl-Alt -backspace to killl X so I have access to CLI so I can login there and run startx.I suspect several gnome packages have been removed/lost as I use lefthand mouse settings and the mostsetting are back to default.All I have is a live CD to gain access to the forum, and I only have one computer.There really needs to be a fallback to one of the smalll DMs on fedora so in situations like this you are nt forced to use CLI, thats if a new user would know how to access it. As there is no bootsplash, you have to already know to hit return and wait for the bootsplash.
IMO this a is a seriouss flaw, in what otherwise is a good OS.In the meantime I'll try and install XFCE to get X running, but I will need some help getting gnome back.I'll load gnome-panel and see if yum will pick up the rest as depemdencies.I hope this isn't a bug, as to lost the DM after the first machine power cycle is fairly drastic---------- Post added at 08:52 AM GMT ---------- Previous post was at 08:18 AM GMT ----------I resorted to yum install gnome-*which loaded 255 packages, including gnome-desktop, gnome-common, all the gnome applettsThis wasn't just one or two packages corupted, it was removal of the DM altogetherSimilar effect to running "rm -rf gnome-* "
View 7 Replies
View Related
Jul 22, 2009
I have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies
View Related
Mar 23, 2010
I've got two laptops (a Dell and an Acer), one for work, the other for home. Both run openSUSE 11.1 64-bit and use KDE 4.4.
Is it possible to copy the settings on one machine to the other? The desktops are pretty similar, but not quite the same - and I can't remember what I did to the one I prefer to get it that way.
Obviously, the underlying hardware is different, but I am hoping that the OS takes care of that.
View 5 Replies
View Related
Jan 14, 2010
I am in the midst of porting a driver that works on kernel version 2.6.21 to version 2.6.27. I am not aware of all the changes that need to be done to achieve my objective.
View 5 Replies
View Related
Apr 20, 2011
I am working under linux/kernel 2.6.32. I want to port a new Wi-Fi driver ath6kl which is already exist under kernel 2.6.37.
View 2 Replies
View Related
Aug 21, 2010
I want to migrate some of the Perl Scripts from Solaris to Linux. Please explain the steps to migrate the Perl script from Solaris to Linux.
View 1 Replies
View Related
Mar 1, 2010
I have written some shells scripts. They basically create ssh tunnels between a my box and numerous nodes on a cluster. Which then allows me send Linux commands and receive output from far away nodes on my cluster.
E.g. Script:
Code:
#linux_command="uname -a"
#Create tunnel
[code]....
View 2 Replies
View Related
Jun 21, 2010
What are the challenges that are involved in porting an Operating system to a new architecture? Say I want to port linux to new architecture called XYZ, what are the things that should be taken care of?
View 2 Replies
View Related
Jun 23, 2010
I use ubuntu 9.04;I have a function called "isLogEnabled" in my project on windows, I wanna port it to linux. I know that I should have a "config.h" file in linux to get log from a specific Shared object and ..., but because I'm new to linux, I don't know how this should be done.
This is my function:
Code:
//This function return True if log policy is set in registry and False otherwise
int isLogEnabled()
[code]...
View 14 Replies
View Related
Jan 8, 2009
I bought a set of 3 laser sensors and it came with a software and its C++ source code for windows to receive the lasers info through the serial port. Since the entire project is running on Linux, I need to port the windows code to Linux. At the present moment, I already can receive the data from each of the 3 sensors, but the info is coming concatenated! Tracking down the original windows code, I found that it is probably happening cause I didn't ported these lines to my Linux version:
Code:
COMMTIMEOUTS CommTimeouts;
[...]
CommTimeouts.ReadIntervalTimeout = 2;
[code]....
I've searched already about how to specify the serial port timeouts on Linux, but didn't find a solution. how to port these lines to Linux or maybe where to find more info about how to set serial port timeouts on Linux?
View 4 Replies
View Related
Jul 28, 2011
I am still new to porting wifi drivers. I am currently porting Ralink RT5370 driver, no problem with the compilation but when I execute insmod operation I got a lot of errors regarding RTMP. This is a part of the error I got:
rt5370sta: Unknown symbol rausb_buffer_free
rt5370sta: Unknown symbol RtmpOsFreeSpinLock
rt5370sta: Unknown symbol RtmpOsPktHeadBufExtend
rt5370sta: Unknown symbol RtmpOSTaskNotifyToExit
rt5370sta: Unknown symbol RtmpOsGetNetDevName
rt5370sta: Unknown symbol RtmpOsHtonl
rt5370sta: Unknown symbol RtmpOsAtomicInterlockedExchange
rt5370sta: Unknown symbol RtmpUtilInit
rt5370sta: Unknown symbol RtmpOSTaskInit
rt5370sta: Unknown symbol RtmpOsAtomicInit
insmod: can't insert '/home/rt5370sta.ko': unknown symbol in module or invalid parameter
Based on the some forum that I've read, adding the MODULE_LICENSE("GPL") is one of the solution. I did add it inside usb_main_dev.c and recompile but I still get the same errors.
View 2 Replies
View Related
May 12, 2009
I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies
View Related
Feb 2, 2011
i am getting segmentation fault while porting project having c,c++,fortran files which has been developed in vc++ windows to linux.this project is working fine in windows but not in linux.when i runned in linux using makefile it is going through some output but again am getting segmentation fault.
View 1 Replies
View Related
Jan 20, 2010
I'm trying to install Kubuntu 9.10 on my machine (I had the same problem with Kubuntu 9.04). The machine is:
- Core 2 Quad 6600
- Nvidia 7600 GS
- Two disk seagate 500 in mirroring raid software
When I try to install Kubuntu, after disk partition, my system dosn't see the CD. He tell me to insert disk into drive but I doesn't touch it. I resolved this mounting an external hard disk into /cdrom. After this, the installation continues until the step "select and install software". At this step, the installation procedure tell me an error. During this error, in the other console, I've this:
Code:
Jan 19 21:58:09 in-target: Alcuni pacchetti non possono essere installati. Questo può voler dire
Jan 19 21:58:09 in-target: che è stata richiesta una situazione impossibile oppure, se si sta
Jan 19 21:58:09 in-target: usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
[Code]....
View 3 Replies
View Related
Jun 18, 2011
I found in my xorg.0.log the the xorg ATI driver is failing ALL options.
Code:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.942] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[Code].....
View 9 Replies
View Related
Aug 5, 2011
I just did a net install on an old powerpc G4 and it seems pretty successful.except i cant change any of the monitor settings from the control panel in gnome (or LXDE)its showing 'not recognised' and only allows 768 x 1024 in very restricted colour.I dont think there is a hardware problem:
- the monitor is a generic old CRT which has worked fine with everything before this.
- the display card is an AGP 32Mb - original with this G4 and was working.
- the computer works great in Mac OS10.3 - (but OS10.3 doesnt support flash or up to date web browser any more, hence trying debian).
i have searched debian forums and various sites, but i couldnt find a fix. It looked like i should edit xorg.conf file but I am not able to find it. I looked in /etc/X11 - but not there.could someone tell me please, do i need to find xorg.conf?
View 7 Replies
View Related
Jan 20, 2010
I have an Ubuntu 9.10 server that is normally headless, but has a TV-Out that I want to start using. I've installed xorg, but when I test it with either startx or just X, I get the following:
Code:
X: warning; process set to priority -2 instead of requested priority 0
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
[Code].....
View 2 Replies
View Related
Apr 24, 2010
Came from 8.04, fresh install. The monitor was not detected properly, I have 1024x768 max resolution on a 1280x1024 screen. As 10.04's xorg has no xorg.conf file, I cannot tell it the right data. What and where are the new config files?
View 5 Replies
View Related
Apr 8, 2010
I am trying to install R in in centos version 5.4 But i got the following error :
*** checking for IceConnectionNumber in -lICE... no checking X11/Intrinsic.h usability... no checking X11/Intrinsic.h presence... no checking for X11/Intrinsic.h... no configure: error: --with-x=yes (default) and X11 headers/libs are not available ****
how can install xorg-x1 package (with resolving all the relevant dependencies). ??
View 1 Replies
View Related
May 24, 2010
I'm somewhat spoiled by standard installations that do it all. This time I'm doing it more manually.I've installed a sid guest vm. I want to give it a graphical face, so for a change I've chosen the lightweight xfce.Only I'm missing the xorg.conf. I've installed xdm, so I have a login. However, it can't get in from there.It hasn't yet generated an xorg.conf in /etc/X11.Short of copying one, which I suppose I might try, How do you prompt debian to generate and configure the xorg.conf from scratch?Currently, I have
root@sid:~# tail /var/log/Xorg.0.log
(II) Xen Virtual Pointer: Found absolute axes
(II) Xen Virtual Pointer: Found x and y absolute axes
[code]....
View 7 Replies
View Related
