Since the yum repository for FC 6 is no longer available, I'm looking for a place to find the latest package of mkisofs that can be used on FC6. I could not find a decent place to download it from.
View 2 Repliesinstalling on linux i try to install VLC and get [user@localhost ~]$ sudo yum install vlc Setting up Install Process Parsing package install arguments Resolving Dependencies
--> Running transaction check
---> Package vlc.i386 0:0.8.7-0.8.fc8 set to be updated
--> Processing Dependency: vlc-core = 0.8.7-0.8.fc8 for package: vlc
[Code]...
I just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
i need to install the package libxmlrpc-core-c3-dev, so i wrote in the command line:
root@ubuntu-desktop:/home/ubuntu/Desktop# apt-get install libxmlrpc-core-c3-dev
& the following message appears:
Reading package lists... Done
Building dependency tree... 0%
Building dependency tree... Done
Package libxmlrpc-core-c3-dev is not available, but is referred to by another package.This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package libxmlrpc-core-c3-dev has no installation candidate
I just bought a netbook that came with Ubuntu. I partitioned the drive so I can multiboot and have put Fedora Core 12 LXDE spin next to Ubuntu netbook edition. The netbook is System76 manufacturer and they have put all their drivers in a .deb package. How can I use this file in Fedora Core 12?
View 3 Replies View RelatedI have created a virtual machine of a system running Fedora Core 4 and I need to upgrade it to Fedora Core 10. Based on what I have read, it iis possible so I started theupgrade process. I get an error message saying that /dev/hda6 (my root paritition does not exist) even though it does.
Does the installer need to read a label from /etc/fstab? I executed tune2fs -L / /dev/hda6 amd ,and added LABEL=/ for the corresponding entry for fstab. but the FEDORA CORE 10 is still giving the same problems for the installation process. Should I upgrade to an intermediate verson like Fedora Core 7 first?
So i upgraded from 9.10 to 10.04. when i ran update manager after the install, it had some stuff for OpenOffice and during the update it hung. I powered off the laptop and turned it back on, booted into ubuntu and tried over but it didn't list the updates again.
View 8 Replies View RelatedI'm having some trouble installing the php-development package on my fedora core 6 server.
Code:
yum install php-devel
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
[Code]...
I recently came back to Ubuntu after a long hiatus. In the last week I've installed and re-installed 10.10 several times getting things the way I want them. Although I've installed on 3 different machines and updated them all almost completely, I'm having a problem downloading the package "openoffice.org-core" On every install on all 3 machines it stops at exactly 20.5 MB out of 27.3 Is anyone else having this problem? I'm thinking it is an issue with the repo, unless someone can think of something I'm possibly missing. This problem has been continuous over the last week, isn't a temporary connection issue.
View 3 Replies View Relatedi am looking for a rpm package to run openoffice because when i try to install it it come up with i need this openoffice.org-core = 1:3.3.0-9.3.fc14 but i cant find it anywhere on the net?
View 14 Replies View RelatedJust a quick question. Does Kubuntu Karmic support core 2 E8500 out of the box or do you need the SMP kernel?
View 3 Replies View Relatedi download the rpm package of gcc .
View 10 Replies View RelatedI am using Oracle Enterprise Linux version 4 update 7. I would like to create and burn iso images via the terminal. Assume I have a folder called movies in directory /root/Desktop.I would like to create a movie.iso image ans burn it using mkisofs and cdrecord.
View 3 Replies View RelatedI am trying to automate yum update of specific package on a remote machine.
So far I have this:
#!/bin/bash
# Update my system
if ! yum update w3m
then
failure=1
fi
if [ $failure ]
[Code]...
I am trying to install libg++2.7.0 package in FedoraCore 6 on a DELL machine that has Intel Pentium D processor.I get an error saying "unrecognized host system name i686 unknown linuxoldld"
View 1 Replies View RelatedIn Ubuntu I can easily transfer packages from offline machine into online machine using APTonCD feature. In fedora ,Is there anything similar by which I can transfer my packages of online machine into the offline machine
View 2 Replies View RelatedAre ubuntu- 64 bit packages I am using on my core 2 duo desktop compatible with core i3? I am thinking of buying new core i3 laptop as I am moving to new city .. I will not be having fast Internet access ( GPRS ), So I will be using the downloaded deb packages (In var/cache/apt) to install softwares I need whenever I format my laptop ( I experiment a lot, So I format a lot )
View 6 Replies View RelatedI have this package dependency question for a while. I have brand new Squeeze system. I selected desktop during installation. Gnome is default system but I turned off gdm3 and uses fluxbox as window manager. I understand if two packages are tied together funtionally so that removal of either package terminates one feature. Above cases, many small packages only depends on the core packages. The core packages work fine without games, other programs.
There are so many programs that I want to remove in the system. For examples, ekiga is a VoIP program that I never use it. When I tried to remove it using apt-get or aptitude, it suggests entire gnome packages will be removed also, which is illogical. The only solution I found is I need to manually remove the package files. I haven't tried it yet.
After going from Debian Lenny to squeeze, everything was going OK, apart from 8 broken packages of which I was easily able to fix 7 of the packages. The last one is x-org core, which comes up with the error message /var/cache/apt/archives/udev_150-2_i386.deb returned an error. From all my research it indicates that an update from kernel 2.6.26-2-686 to a later version is required due to 150 udev requiring the support of the CONFIG_SYSFS_DEPRECATED. My next question is where to start, do I need to add a linux-image repository in sources.list and then use the command-line or am I headed in the wrong direction.
View 3 Replies View RelatedI set up my home server like 3 year ago on a Fedora core 4, I am running a NAT, firewall and FTP very smoothly on it. In the past 3 years, it has been doing perfectly without any modification/ upgrade. But recently, I just realized I might need a VPN server on it, but the recent release of OpenVPN doesn't support Fedora core 4 anymore, therefore I suddenly want to make an upgrade. I've read the articles/ manual for Fedora 13, yet I do not find any suggestion on how to upgrade to 13 from core 4.
how can I do an upgrade in the easiest manner as I don't want the server cease working too long (I need its NAT for my network).
I'm having some problems getting the GUI installed in my Server 10.04 installation.
I've installed the Ubuntu server 10.04 32bit with a VMWare player on a Windows XP Pro host. Everything seems to have gone ok but at the end of the install it said that VMWare items are being installed and while that happens I can only use the terminal mode or I could wait for the GUI to load. Well the GUI never loaded so I logged in through the terminal.
I realized immediately that I'm over my head as I'm more familiar with DOS rather than bash or the terminal commands of Ubuntu. So I tried to look up on the internet (from my host machine) on how to start or install the GUI interface for the server. I've found lots of things that show commands like:
sudo apt-get install gnome gdm
or
sudo aptitude install gnome-core
but in all cases I get a message that the package is not found. So I'm wondering how do I find the package so that I can install this?
I am in school for my CIS degree and the book I am using this session covers Windows XP and Fedora Core 4. I am having trouble finding & downloading Fedora Core 4. My question is: Is there a big enough difference between Fedora Core 4 and Fedora Core 14 that I would not be able to use 14 instead of 4?
View 14 Replies View RelatedWhere can I get the wireless driver for Fedora core 10. I am using a 64 bit system with a hp pavilion notebook.
View 7 Replies View RelatedWhen I am trying to install Fedora Core 10 into a XEN VM i get an error stating that images/xen directory does not exist on the DVD image.
View 2 Replies View RelatedI cannot install Fedora core 10. It boots up and it gets to the Fedora 10 loading screen. After that it complains my monitor is out of Range and that's as far as I can go. I had originally thought I could get to some text install mode, but I don't make it far enough to do that.
View 1 Replies View RelatedI just got an update that installed, and after a reboot I've got one core at 100%. The "you need to restart" icon in the notification tray said "glibc glibc glibc glibc nscd". Now that I look at it, It's switching between both cored. This behavior is consistent over multiple full reboots as well as kexec reboots.
Edit: Strange, just when I finished, the CPU load settled out and now everything is fine. I wonder what was going on. I'm rebooting right now to double check. Edit2: Yep, same issue 100% usage on one core. And it probably will level out soon. I'm not sure what could be causing this. I assume that glibc could be the issue.
I just installed Windows 7 Ultimate on my computer and I want to install Fedora Core 11 and dual boot my system. I have been on the net looking around, but I can't seem to find any suggestions on how I would do this. Can someone help me or give me a URL(s) that will give me a step-by-step guide on how to install Fedora Core 11 on a Windows 7 computer?
View 4 Replies View RelatedI wanted to try Fedora 12 Live/KDE on a newly-bought Fujitsu Esprimo P1500. Booting with no kernel options would just freeze the machine. After some random experimentation, I added the option "nolapic" and got a seemingly working machine. However, only seemingly, as it turned out that only one of the processor cores was working (the processor is a "Pentium(R) Dual-Core CPU E5300").
View 4 Replies View RelatedI am trying to install FC4 in my pc having WDC WD800JD SATA HDD. During the installation it shows that no HDD found. I have searched a lot but no driver are found for fedora core 4.
View 10 Replies View RelatedI upgraded from 9 to 10 and now i can't use firefox it says "couldn't load xpcom" anybody know what i could do..
View 3 Replies View Related