Fedora Installation :: Using A SDHC Card For The /home Partition ?
Jul 16, 2009
When installing Fedora 11 (Gnome, from live CD), is it possible to use a SDHC card for the /home partition?
The reason I'm asking: having heard that Fedora 11 should support the EeePC 701, I decided to try the installation, following this guide. I created the partitions as in the guide, with the exception that in the place of a 16 gb secondary SSD I have a 16 gb SDHC card. The installation ends in an unhandled exception.
I tried various different partitioning systems, always however putting the /home partition on the SDHC card, because if I select only the machine's 4 gb SSD to be used in the installation, I'm told that there is insufficient space. Whatever I try, I always get the unhandled exception error. So, I'm wondering if this is due to trying to use the SDHC card for the /home partition.
I'm afraid I didn't save the error message details, and since installed OpenSUSE on the eeePC, but this started bugging me.
View 1 Replies
ADVERTISEMENT
Jul 21, 2010
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
View 2 Replies
View Related
Oct 24, 2009
I would like to install fedora onto a memory card 16Gb kingstone SDHC that I use in a ACER aspire one
I followed the instruction on the website and I found the following problem:
The wireless and Ethernet hardware where either not found or, if they were found, they did't work and there were no possibilities to make it work.
The strange thing is that almost every time after I attempted to boot form the memory when booting window as usual, the Ethernet hardware was not found anymore also under window!
View 2 Replies
View Related
Sep 29, 2010
I have tried putting the SDHC card in before switching on laptop, after, unmounting and remounting several times... on the odd occasion (1/10?) it reads fine, but more often than not, i can see thumbnails of all the images but on opening the file it comes out wrong...either most of the image is a grey block - so can see a tiny bit of sky then its as if it hasn't rendered the whole image...or, the image is striped horizontally, with as if a film negative has been shredded and then misaligned with the colours going wrong...is there an update, something to install to fix this? ETA: - its not the card which works perfect on other laptops and its not the card reader it opens fine in windows 7 on the same computer.
View 10 Replies
View Related
Dec 25, 2009
F12 on my aspire one (A110, the original 8Gb SSD model) works well with only one significant problem.
Suspend fails; the screen fades to black, backlight stays on, macine stops responding to keyboard/mouse/powerswitch and just hangs (for at least an hour... longest I left it). Only thing that works is a 5 second click of death on the powerswitch. Plus an FSCK on at least one occasion after reboot. I have not been able to check if SSH and shutdown possible (on vacation) plus have logs go to a tmpfs (to save my SSD) so no log info. Similarly I cannot confirm if this affects hibernate because I run without a swapfile (SSD again, i.5Gb ram installed and I have never come even close to running out of memory).
But I think I have the culprit anyway:[url]
As described there; shutdown fails if there is a mounted card in the cardreader slot (/dev/mmcblk0) My system has a 4Gb SDHC card in the LH slot with a single XFS filesystem; which has my homedir on it; if I unmount that filesystem (but do not remove the card) shutdown and restore appear to work properly. But if the filesytem is mounted I get the bsod. Linked bug suggests this is restricted to large filesystems (?SDHC?) but I have not fully confirmed, although that matches my situation.
Posting here to see if anyone has any further info/workarounds, to ensure the fedora crew are aware that this appears to affect F12 (and is a regression, F11 suspended fine) and make sure it is documented somewhere. The linked bug also states similar bad suspend activity on other netbooks.
I'll try some other variations (and see if it also happens with USB sticks/RH cardrader, and report back here.
View 6 Replies
View Related
Dec 17, 2010
I am wondering if it would be possible to format an 8g SDHC card in a way that it will be able to be written to and read by an SD reader?
Reading about SDHC vs SD suggests that the only difference is the block/cluster/byte configurations. Is that true?
Could I format the 8g FAT32 SDHC with gparted to a 1g FAT16 partition with the rest of the space left un-formatted so an SD reader could handle it?
View 2 Replies
View Related
Jun 19, 2010
I am using UNE 10.04 and when I place my SDHC card in my netbook's built in sd card reader it doesn't do anything and shows no signs of the cards existence. I am dual booting with windows 7 which does recognize the card.
View 9 Replies
View Related
Jun 18, 2009
Anyone succeed with f11 install on netbook (/ on SDHC, /boot on primary SSD/HDD drive)?
My netbook (AAO) works just fine with f11 Live-on-usb-sick (created with live-usb-creator), but fails to boot fedora from SDHC.
View 1 Replies
View Related
Jan 5, 2011
I have an HPDV7 running 11.3.
I have a new 16GB SDHC memory card.
It is formatted FAT-32 LBA
When I plug the the card into the DV7's internal MMC/SD card slot, it automounts as /dev/mmcbkl0p1.
I can then access files (camera images) on the card with Dolphin, etc.
When I plug the card into an external card reader(USB interface), automount fails and I can see a long string of messages from dmesg. It is attempting to mount it as /dev/sdd, I see numerous I/O errors as it attempts to read various sectors.
The card reader is a Kingston FCR-HS219/1.
The 16GB SDHC card in the Kingston card reader combo works on my WinXP machine, so (apparently) the combo does work.
A 2GB SD card (FAT16) in the Kingston reader works on both WinXP and the HPDV7 11.3 laptop.
View 7 Replies
View Related
Jan 14, 2011
I've installed fedora 14(fresh installation) on extended partition.(~25GB).But I found that I've one standard partition of size 30MB.So should I install fedora on standard partition or LVM?I heard people saying that having home on seperate partition is good.But seperate partition means seperate physical partition or logical partition(also)?
View 2 Replies
View Related
May 24, 2011
After reading a SDHC (camera) card with my computer in a non-HC compatible card reader, i guess i destroyed the partition table.
After getting a SDHC-compatible reader i found it seems there is no part. table on the card and no fdisk(1), badblocks(1) can read that card.
Seems they will wait forever to get a part table.
dmesg says:
How to recover the card?
View 2 Replies
View Related
Mar 6, 2011
I have an 8 gig ssd Dell vostro that has been running ubuntu linux successfully for several months. Linux is the only O.S. on the machine. Wishing to have more room I inserted a new 32 Gig SDHC card in the card slot and did an ext4 format and then did an install using the 10.10 disk that did the original install. Everything seemed to proceed as expected, but it rebooted using the 8 Gig drive. The 32 Gig card appears to have all the proper files. How do I get it to boot from that card?
View 3 Replies
View Related
Jun 12, 2009
I have successfully installed Fedora 11. It works fine with no problem what so ever. My problem is that while using F10 I have created a separate partition for "home". I tried to use the same /home partition for F11 but it did not work. how to achieve this and at what state of the installation.
View 14 Replies
View Related
Feb 7, 2011
I tried to install rawhide by enabling the rawhide repo and doing a yum update. Lets just say it didn't go so well. My system wont start the GUI when I start the computer. It just shows the Fedora boot animation and stays there. So anyway I need to reinstall Fedora 14. I wanted to reinstall Fedora without having to backup and restore all my data (my home directory). So I did some Googleing and found that if I had my home directory on a separate partition that I was set to go. All I had to do was format "/" and just tell it to use the "/home" partition I already had and not to format it and I that was it. So I went to try it myself and found that it was not as straight forward as it seemed. Well at least for me.
I clicked on "lv_root" assuming that was supposed to have "/" as its mount point. I clicked the edit button. I selected "/" as its mount point and told it to format it as ext4. Then I clicked on lv_home and clicked on the edit button. I made its mount point "/home" and clicked "ok". I clicked "Next" and I get this error "Bootable partitions cannot be on a logical volume". What do I need to do to fix this? I assume this has to do with the "lv_" at the beginning of the partition names.
View 5 Replies
View Related
Jul 1, 2011
I have installed Ubuntu Lucid Lynx to dual boot with Vista Business on a Toshiba Port�g� R500. Everything seems to be working great out of the box, but I have a problem with available space on the rather modest (but spectacular performance) 64GB SSD.
1) Current Partitions:
Toshiba includes three partitions on the new 64GB system, to which I have added one primary Linux container partition, enclosing two logical partitions.
- /dev/sda1 TOSHIBA SYSTEM VOLUME: 1.6GB, Partition type "Unknown (0x27)
- /dev/sda2 Windows Vista Business: 49GB, NTFS
- /dev/sda3 HDDRECOVERY: 6.5GB, Hidden HPFS/NTFS (0x17)
- /dev/sda4 Linux Container for sda5 & sda6: 7.6GB, Extended
- /dev/sda5 Ubuntu Filesystem: 6.6GB, ext4
- /dev/sda6 Swap Space: 1.0GB, Linux swap
I'm sure I'll remove Vista eventually, but in the meantime, (along with MS Office) it requires a whopping 32GB just to admire itself, after all the updates and security upgrades have been applied. I shrunk the partition to 49GB to leave space for future updates and upgrades.
Right now, Ubuntu only occupies 2.4GB of it's allocated partition, leaving 3.6GB free (I know, that doesn't add up to 6.6GB, but that must be something to do with GiB vs. GB, ... or magic, maybe). Swap is only 1.0GB, with 2.0GB of RAM, but I don't use Hibernate.
2) Installing /Home on SD Card
Well, I tried this first, since I have a nice 8GB, Class 10 SD Card, and a built in SD Card reader. With the SD Card inserted during installation, I was able to select it and designate it as /Home, but when I tried to restart after insallation was complete, I got an error message before the Ubuntu login screen could appear.
I think what is happening is that it doesn't mount normally when booting. It's not listed as a bootable device in BIOS, but there is a Toshiba Bootable SD Card utility included with Windows, which needs a bootable floppy or something to work. There must be something that allows the BIOS to recognize it as a floppy during boot, or whatever, but any Toshiba Utility isn't going to work with a Linux file system. Puppy doesn't like it either for the Puppy sfs saved user file (although it will usually work if I copy them there manually, rather than allow them to save automatically).
3) Extending /Home to the SD Card
I thought I'd just have to copy stuff to the SD Card manually, as extra storage, when /Home got too crowded and cosy. Then I noticed that as soon as I inserted the SD Card it immediately got added to the total space avaialable shown by the Disk Usage Analyser accessory (which just happened to be open at the time). So now I see 10.8GB total, which is plenty to start out with for me. I assume this is because the SD Card had been formatted to mount as /Home when I first tried that solution, and got recognized as soon as it was inserted in the slot.
Questions:
a) Will this work? Will /Home really use the extra space, or is it just "pretending"?
b) Is there anything special I might need to do?
c) What do I do with the three folders already on the SD Card, obviously put there during the failed attempt to install /Home on the card? (The third folder is hidden: ".ecryptfs".)?
d) Is it acceptable to leave swap with just 1.0GB, since I don't need to hibernate?
e) Anything else I need to consider?
View 9 Replies
View Related
Jan 9, 2010
I ve got Eeebuntu 3.0 installed on one partition, and Fedora 12 installed on another, sharing the same /home partition, and within that, I have them sharing the same user folder. It complicates matters as Eeebuntu (with it's Ubuntu 9.04 base) still has Firefox 3.0.16, and Fedora has 3.5.6 (Adblock no longer works in Eeebuntu, I stupidly upgraded it in Fedora). I want to keep the same partition layout, but resolve these conflicts. Is there any way I can change the /home folder for Fedora, or Eeebuntu so that each one has different settings, but still be on the same /home partition?
View 3 Replies
View Related
May 5, 2009
Having already borked my system once while deciding to nstall Fedora 10 under the influence of a false sense of bravado, alcohol induced, I thought I should ask for a little insight before trying things again. Once I get my system fixed and before consuming alcohol that is.Short version:I thought Id be smart and mount the /home partition I use for openSUSE as /home for Fedora, I mean that why I made /home it own partition right? Well, thatwhen the alcohol took over and I thought I be rilliant(not so much) and just use my SUSE username for Fedora too, since, you know,e already got all my files and settings stored there.
Thus my request for the answer on how to correctly use the same /home partition across multiple OS installations; with the preferred goal of retaining access to email folders, various files, games (WINE) and such no matter what distro I�m using. Would it really be as simple as just not using the same user name for more than one distro? What addtional issues does that solve/create
View 3 Replies
View Related
Sep 25, 2009
I'm planning FC11 x86_64 with a live cd , but I would like to preserve my /home partition that is in ext3 . or is there a way to do an install and keep my /home and convert it after in ext4
View 1 Replies
View Related
Feb 21, 2009
I have just spent dome time using gparted to sort out my partitions. I have a vista partition, a fedora one and a big chunk of unallocated space I wish to use as my data drive.
I want to move my ~ folder to the new partition and have windows/vista access the folder and write to the Documents, Downloads folders etc.
What is the best format to use?
Also I plan to start backing up my partitions to a server, for instance using g4l to save a linux image (maby a windose one too). Is there any benifit in keeping all the hidden files (ones starting with period '.') i.e moving the whole ~ folder or would I be best off leaving the ~ dir and moving the folders I know i use such as ~/Downloads, ~/Documents etc?
And how should i preform the move of all these files? 'mv'? do i need to add any special options?
View 3 Replies
View Related
Mar 15, 2010
Can I create common /home partition for multiple Linux distributions like Fedora, Ubuntu, openSUSE?
View 3 Replies
View Related
Sep 1, 2011
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
View 9 Replies
View Related
May 11, 2011
I was wondering what the best way is to partition multiple distros to share one home partition.
View 8 Replies
View Related
Jan 14, 2010
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies
View Related
Aug 24, 2010
I installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?
View 1 Replies
View Related
Dec 17, 2010
i installed fedora kde 32 bit and iam realy loving it. but i want to resize my home partition as i got a message there is no space in my home folder i downloaded a Disk utility application .... to try and resize .... but looks like i dont know what to do
View 3 Replies
View Related
Sep 22, 2010
I have a small laptop that came pre-loaded with Windows 7. It's an HP dm3-1030US. I would like to run Ubuntu 10.04 on it. It's a small laptop with a 13.3" screen and no CD/DVD so there's no room for a second HDD and I don't want to dual boot "Too many issues" and I don't have the Windows disk in case anything gets messed up. I have run Ubuntu from a Supertalent 16GB SLC thumb drive but ran out of room after a few updates. Does anyone have experience using a 32GB SDHC SLC for Ubuntu? I'am looking at this one: [URL].
View 9 Replies
View Related
Feb 7, 2010
I was surprised not to find an existing thread on this anywhere, as I would expect this to be a common problem: I have the following partitions on my eee PC 100HE:
10GB Windows XP
5GB Linux Mint 8
5GB Ubuntu 9.10 NBR (awesome distro by the way!)
130GB Home partition shared by Linux Mint and Ubuntu NBR
2GB Swap partition shared by Linux Mint and Ubuntu NBR
I installed Ubuntu NBR after Mint. Immediately after install, the panel layout, menus and colour scheme were slightly messed up - presumeably because they had been "adopted" from the Mint settings in the home folder. I corrected them easily, but now I have the same problem in Mint. Is there any way I can get both distros to use the same /home folder, but different settings (i.e. the /home/username/. folders)? Can I get these settings folders put on a different partition for example?
And is this problem due only to the fact that these are 2 Ubuntu-based distros? Or will I have the same problem if/when I replace Mint with another distro, such as Fedora or Moblin?
View 6 Replies
View Related
Dec 1, 2010
Is there a way to setup a separate /home partition during a new installation of Ubuntu? If so, how. I've found guides about how to do it after installation, but it seems there ought to be a way to do it that way from the very beginning.
View 6 Replies
View Related
Jan 14, 2010
I bought a new computer that has Windows preinstalled and I want to install Ubuntu to dual boot. I'm considering making /home on a separate Windows partition in Gparted.. would it slow the performance significantly if I used this setup? I'd like to be able to access my important files regardless of whether I boot into Windows or Linux..
View 4 Replies
View Related
Nov 1, 2010
I'm having some small lagging problems with my upgrade to 10.10. I haven't done a clean install since 9.04 so I'm thinking of doing one... and I have a few questions.Would making a separate partition at installation be worth it? If so how much run should I set for / ? 10gb? more? less?Also should I create a swap partition? I never use hibernate. Actually whats a good reason anyone would use hibernate on a desktop? on a laptop I could see a few instances but anyway it's shutdown or suspend for me[URL]
View 9 Replies
View Related
