Fedora :: Install Python 2.7 On 15?
Jul 29, 2011i want IDLE on my Fedora 15, is this possible?
View 2 Replies
ADVERTISEMENT
General :: Get Apt-get To Install Python Packages For A Different Version Of Python?
Oct 27, 2010in ubuntu 10.10, I have installed python 2.7. I would like to use apt-get to install packages to this version of python but I haven't been able to figure out howThings I have tried without success:changing the symlink at /usr/bin/python to point to /usr/bin/python2.7 - even after doing this apt-get still installs stuff to python2.6.Set up python2.7 as the primary alternative using update-alternatives - doesn't work
View 3 Replies View RelatedFedora :: Can't Install Python 2.6 On 15
Aug 13, 2011I can't install Python 2.6 on Fedora 15 - I have only Python 2.7. Also I can't add EPEL repository to try to install: yum install python26 I didn't find any info about how can I solve this problem.
View 12 Replies View RelatedFedora :: How To Install Sqlite-python
Nov 18, 2009I am trying to install sqlite-python package in my FC11 machine. I couldn't find an rpm to install.
View 2 Replies View RelatedFedora :: Install Python 3 And Idle In 12?
May 28, 2010how can i install python 3 and idle in fedora 12? yum search for any plausible variation on python3 (python-3, Python-3.1, etc.) that i could think of yields nothing, same in add/remove software. so i got the tarball from python.org and followed book instructions on it (summerfield's python 3, p. 4), namely unpack it, run './configure', run 'make' and finally run 'make install'
in my add/remove programs window, for idle, it says i have the one for python 2.6 installed, but i can't find where to open the program. but i'd like to use 3.1.2 python anyway. additional note: if i type python -V i get Python 2.6.x (can't remember the last digit, i think it's 2), and if i type python3 -V i get Python 3.1.2. so, how do i get python 3 installed and idle for python 3 running?
Fedora :: Install The Newest Version Python 3.1.2?
Apr 9, 2010i got per default python 2.6.2 on my fedora 12. how can i install the newest version python 3.1.2?
View 2 Replies View RelatedFedora Installation :: Cannot Install Python-virtualenv?
May 7, 2010I get an error when trying to install python-virtualenv package:
Quote:
# yum install python-virtualenv
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check
[Code]...
AFAIK, python-virtualenv package does not really require any development packages (at least in ubuntu, debian, opensuse). Is it a bug? I didn't find anything with search engines...
Fedora :: Install Python Spider Monkey?
Aug 19, 2011I'm trying to install python spider monkey. I already have pkgconfig and nspr installed however when I runeasy_install python-spidermonkey it says
Running python-spidermonkey-0.0.10/setup.py -q bdist_egg --dist-dir /tmp/easy_install-hjTAdp/python-spidermonkey-0.0.10/egg-dist-tmp-sbqzO9
Traceback (most recent call last):
[code]....
Fedora :: Install Screenlets Under 11 - Getting The Python(abi) Dependency Missing Message
Aug 18, 2009i wanted to install screenlets under fedora 11 but python wont let me, is there a way to do it i keep getting the Python(abi) dependency missing message I've tryed both 32 and the 64 bits version, even the noarch i found here with no results at all
View 14 Replies View RelatedFedora Servers :: Install MySQLbd (a Module For Python To Connect And Access MySQL)?
Sep 28, 2009I was trying to install MySQLbd (a module for python to connect and access MySQL) I followed these steps for installation[URL].. but while I am getting some installation errors. When I try to run $ python set.py build I am getting the following errors (I removed few errors as I can post more than 10000 characters here)
[Code]...
Fedora :: Using Python 2.5 With Python 2.6 With F12?
Nov 30, 2009Fedora 12 officially uses Python 2.6, good. But the Google AppEngine still goes by Python 2.5 and is showing import errors while i try to start the SDK. Here is the stack trace.
[URL]
Programming :: Make Python Programs Run Without Entering The Command Python?
Mar 22, 2009I want to be able to do
sudo ./program.py
instead of always having to do
sudo python program.py
What do I need to change?
Programming :: Python - Get Text File Data Into An Array On Python?
Nov 30, 2009I've already used line split stuff to transform my data into something like this in a text file:
Code:
['1', '1', '3', '20.7505207']
['2', '1', '3', '23.0488319']
['3', '1', '3', '-1.5768747']
['4', '1', '3', '-26.4772491']
[code]....
How can I get this on a python program so I can manipulate it as an array?
CentOS 5 :: Cannot Install YUM And Python Iniparse To Install ImageMagick?
Aug 9, 2009I have logged into root via SSHI followed instructions from here[URL]And here[URL]
View 1 Replies View RelatedSoftware :: Python 3 Want Situation For Python 2 And Become Stop?
Jul 17, 2010Python 3 want situation for python 2?Python 2 become stop?
View 1 Replies View RelatedCentOS 5 :: Yum - Python-devel / Python Dependency
Jan 7, 2011yum dependency problem please? I am running Centos 5.5. I need to install python-devel, but when I do so I get:
[Code]....
Ubuntu :: How To Install Python 2.6.5
Jun 10, 2010I tried to downloaded and installed from the Internet directly but it gives me error message. Also I tried to downloaded it from Ubuntu but when I go to the software package and click on python it show me hundreds of python types. I'm a beginner and I need to use Python for my class this summer, I only need to use python GUI. how to install python on Ubuntu and also how to find it after installation.
View 6 Replies View RelatedUbuntu :: How To Install Python 3.1.2
Jun 19, 2010I've done command line work in Linux, so I need a refresher.I have downloaded and extracted Python 3.1.2. How do I install? All of the HELP and README files are a little vague for me. but when I type in "./configure" in a terminal session, it says "command not found".
View 2 Replies View RelatedUbuntu :: How To Install Python 2.6 On 8.04
Oct 23, 2010how to install Python 2.6 on Ubuntu 8.04, I checked and the latest ver. on the ubuntu repository is 2.5 I need 2.6 I just compiled it using the following guide.[URL] I just didn't get how to set my PATH I followed all the steps that were there exactly.
View 2 Replies View RelatedUbuntu :: 10.10 - How To Install Python
Dec 23, 2010I am super new to Linux and Ubuntu. I am trying to install python and I downloaded it from the website. I do not know how to actually install it though. I have Ubuntu 10.10.
View 6 Replies View RelatedSUSE :: Uninstall 2.6 - Install Python 2.5 ?
Aug 24, 2010I am fairly new to Linux. I have OpenSuse Desktop 11.3. For a software package I need to install, I have to have Python 2.4 or 2.5 - it will not run with Python 2.6. I cannot find any way in Yast to install the older version of Python. So my question is this: How do I first uninstall Python 2.6 so I don't screw anything up, and then install Python 2.5? Is it as simple as using Yast for the uninstall, then finding the tarball for 2.5, unpacking it, ./configure, sudo make, sudo make install?
View 3 Replies View RelatedGeneral :: How To Install Python In RHEL 5?
May 22, 2011I want to install python in RHEL 5.0.
View 2 Replies View RelatedUbuntu :: How To Install Python-xml In Karmic
Feb 8, 2010I need to install python-xml on my kubuntu 9.10 but I cant do it with apt-get.I downloaded it from somewhere else but still I cant install it because of python 2.6.
View 1 Replies View RelatedGeneral :: Install The Python Module For Gnash?
Aug 5, 2011How do I install the Python module for Gnash?
But apart from that, what basic concept am I not understanding about installing packages on Linux?
I am used to installing packages using package managers - mostly apt-get and zypper. I have occasionally installed from source, often with no trouble. However I recently installed Gnash and discovered that it has a Python binding that must be compiled from source and this has led down a rabbithole making me feel stupider at each turn.
First, I attempt do a ./configure --enable-python in the gnash source dir. This ends up failing with an error that
package pygtk-codegen-2.0 isn't found
The lead developer, Rob Savoye, was kind enough to point me at packages.debian.org, telling me I just need to locate this package. After many failed searches, I found that the python-gtk2-dev package contains this ... file? script? Great, but I couldn't figure out how to obtain the python-gtk2-dev package. It doesn't exist in any of my openSUSE configured repositories.
So I headed to the GNOME site and searched, found that the PyGTK package contains pygtk-codegen. Download the tarball, cd, ./configure, and this fails because I don't have GLIB. After some more searching I use zypper to install glib2-devel (libglib-2.0 was already installed), and now PyGTK fails to configure because I don't have GObject.
Find that, download tarball, cd, ./configure, fail. I don't have gobject-introspection-1.0, apparently. I DO have gobject-introspection installed, and it's version is ≥ 1.0, but that's what the script says.
So I will readily admit I am new to Linux, but I have to be missing some basic step here. Can anyone give me a clue about any of the above? Is it normal to have to install one dependency after another like this? Is OpenSUSE the wrong distro? What would make this process not so horrible?
Ubuntu :: Install The MySQLdb Package For Python?
Feb 23, 2010I am trying to install the MySQLdb package for python and the instructions tell me that I need to add mysql_config to my path. This file does not appear to exist in my mysql installation, or anywhere on my machine. I installed mysql-server from the ubuntu package manager, and then did a search of my system for that file.
Code:
sudo find / -name mysql_config
This gave me no results. where I can find this? Is it part of some extra toolkit for mysql?
Ubuntu :: Install The Python-matplotlib Package?
Mar 12, 2010I am trying to install the python-matplotlib package but I get E:broken packages. I have tried the apt-get -f install, apt-get update, apt-get clean all in various permutations but it doesnt solve the problem.I also tried uninstalling the dependednt packages and then reinstalling them but that doesnt work either.
root@ubuntu:~# apt-get install python-matplotlib
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
[Code]...
Ubuntu :: Install Python Program From Source?
Dec 16, 2010I downloaded this programs source and I'm having a hard time figuring out how to install it. I assume it is python source? I tried downloading the debian file but could not figure out how to install it aswell. I downloaded the software from [URL]
View 9 Replies View RelatedServer :: Install Torrentflux That Requires Python?
Jul 14, 2011i am trying to install torrentflux that requires python. but it says python path invalid . though it is installed and path is valid. i have chmoded it to 777 but same problem. I am using centos with LAMP.
here it the screen[URL]...
Slackware :: Adding Python After Initial Install ?
Apr 14, 2011Just installed 13.1 64bit on my laptop. In an effort to keep things slim, I neglected to install the 'D' group....didn't figure I would be doing any developing (call me a literalist). I install Wicd and find that Python is a dependency. What is the easiest way for me to make this happen? Should I just install the python txz or will there be more dependencies that could be solved easier with a script?
View 2 Replies View RelatedProgramming :: Python 2.x - Represent The Same In Python 3.x
Mar 4, 2010I have a function definition in a Python 2.x script which take a tuple as one of its arguments, but 2to3 has no answers nor any of my searching on how to represent the same in Python 3.x
Code:
def blah(self, (string1, string2))