Fedora Hardware :: Ata3 Ata5 Which Are Real Disks Affected
Jun 17, 2011
I started to have a particular problem with my hard drivers, I can hear how they do a weird noise, like the one that a hard disk does when you start your PC, but it's very often once per second while I use my computer, if the computer is idle nothing happens. Sometimes it says that the error it is on ata3, sometimes it is on ata5
[code]...
What could be the problem? I have 4 SATA disks, in 2 of these disks I have in each one a partition of 250 GB and are mirror under mdadm as raid1. What about the names ata3 ata5 which are the real disks affected?
View 14 Replies
ADVERTISEMENT
May 16, 2011
I notice a bunch of weird what appear to be hard drive related error messages on my Linux server:
Code:
May 16 19:07:38 ghost kernel: [ 3495.452698] ata3.00: configured for UDMA/33
May 16 19:07:38 ghost kernel: [ 3495.452706] ata3: EH complete
May 16 19:07:40 ghost kernel: [ 3497.380640] ata3.00: configured for UDMA/33
May 16 19:07:40 ghost kernel: [ 3497.380648] ata3: EH complete
May 16 19:07:44 ghost kernel: [ 3501.732973] ata3.00: configured for UDMA/33
please use /proc/5073/oom_score_adj instead.
I don't know if this could be an indication that my hard drive(s) are about to fail. Can someone tell me if there's a way to test the drives or understand what's causing this error?
View 6 Replies
View Related
Dec 23, 2010
I've modified the Radiance theme and installed it, and everything looks wonderful except for one thing. Certain programs have ugly windows and progress bars, as if all window effects were disabled for those windows. The progress bar in GIMP is not affected.
View 2 Replies
View Related
Apr 26, 2011
I have embedded linux (apm distributive). I modify /etc/hosts file and that changes not affected.
What could be the problem?
Example
/etc/hosts
127.0.0.1 localhost
127.0.0.1 hana-009
ping hana-009
ping: bad address 'hana-009'
View 7 Replies
View Related
Aug 8, 2010
I have Ubuntu 10.04 but I installed KDE for a try(which I'm not liking by the way >_>)I can use the volume control in GNOME still and I can control it with PusleAudio but I can't use my keyboard buttons for Pulse, only KMix. In Kmix though I can't find a master channel for HDMI.
View 2 Replies
View Related
Mar 26, 2011
I sometimes experience rather significant visual artifacts in Maverick. Some programs are more affected than others, but the problem is systemwide. It's most obvious when trying to read a pdf-file, as you can see in the attachments.
Interestingly, video never seems to be affected; even when the artifacts are so bad I can barely see what I'm doing, watching a movie in VLC works without problem (although the VLC GUI itself is affected).
The problem doesn't appear every session, but it is common. Approximately every third session is affected, and once the artifacts appear they remain until I restart the computer.
View 2 Replies
View Related
Jun 25, 2010
Just switched my laptop from that other operating system to openSUSE11.2. Everything works great except for one odd little bug. Both my speakers and headphones have output, are affected by the volume control and it even detects when I plug in headphones and stops output to the speakers. However the moment I adjust the volume, output to my headphones stops, and my speakers start.
Following is my multimedia information: [URL]
~> rpm -qa '*alsa*'
alsa-plugins-pulse-32bit-1.0.21-3.3.x86_64
alsa-plugins-pulse-1.0.21-3.3.x86_64
alsa-plugins-32bit-1.0.21-3.3.x86_64
alsa-1.0.21-3.2.x86_64
alsa-plugins-1.0.21-3.3.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-oss-1.0.17-25.2.x86_64
alsa-oss-32bit-1.0.17-25.2.x86_64 .....
View 9 Replies
View Related
May 3, 2010
I've just update my computer to Ubuntu Lucid and I'm having some problems.After a random time, my mouse and keyboard stop working and I get the following lines on dmesg (I have to get this using a ssh connection):
ata5: lost interrupt (Status 0x51)
[ 980.000034] ata5.00: qc timeout (cmd 0xa0)
[ 980.000046] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[code]....
View 9 Replies
View Related
May 23, 2011
need to find what device "ata5" is on my computer.When booting my box today I noticed the following message in the dmesg log:
Code:
ata5: softreset failed (timeout)
Not sure what this is all about, but I would very much like to find which disk this message relates to - however, for the life of me I can't find out which block device it is.
View 10 Replies
View Related
Feb 25, 2010
I have servers which contain SATA disks and SAS disks. I was testing the speed of writing on these servers and I recognized that SAS 10.000 disks much more slowly than the SATA 7200. What do you think about this slowness? What are the reasons of this slowness?
I am giving the below rates (values) which I took from my test (from my comparisons between SAS 10.000 and SATA 7200);
dd if=/dev/zero of=bigfile.txt bs=1024 count=1000000 when this comment was run in SAS disk server, I took this output(10.000 rpm)
(a new server,2 CPU 8 core and 8 gb ram)
1000000+0 records in
1000000+0 records out
1024000000 bytes (1.0 GB) copied, 12.9662 s, 79.0 MB/s (I have not used this server yet) (hw raid1)
[Code].....
View 3 Replies
View Related
Mar 31, 2010
I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)
Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?
View 2 Replies
View Related
Aug 21, 2010
I am newbie to linux, I am dealing with Fedora core 13. I have already succeedded in building an ad hoc network and a WLAN network. My next step is to get some networking statistics such delay, throughput, etc. So, I need traffic to flow through the network for both multimedia traffic and bulk data traffic. How to send files between nodes on the network (I found commands ftp, rcp but do not know whether they are the correct choice for this). ID their any application to perform this?
Also, I want to perform some video streaming between two nodes to study the behavior of real time data transfer. Is thier any application to perform this?
View 4 Replies
View Related
Mar 10, 2010
I have a directory full of symlinks. I want to zip them as if there were the real files. If I just zip them as usual, the resulting zip file does not contain the files at all! Is there any way to do this?
View 3 Replies
View Related
May 31, 2010
I've just installed FC 13 and trying to get Real Player installed. After downloading it from Real installing it gives this error
rpm -ivh RealPlayer11GOLD.rpm
Preparing... ########################################### [100%]
1:realplay ########################################### [100%]
postinst called with unknown argument `2'
warning: %post(realplay-11.0.2.1744-1.i386) scriptlet failed, exit status 1
Then it thinks it's installed because it doesn't install again have to force it the second time. Can't remove it though because that doesn't think it's there.
View 2 Replies
View Related
Sep 27, 2010
How to check or find the real package name which must be installed for errors below:
There are to many package name if i search using (example) "yum search PythonLibs" or "yum search Threads" or "yum search Libintl". Even sometimes, the yum cannot find what we looking for exactly.
View 5 Replies
View Related
Jul 15, 2010
I have installed linux on a virtual machine in Oracle VM VirtualBox because I want to run linux while running windows at the same time. I was wondering if there is any difference between a real linux system and a virtual one for learning purposes.
View 5 Replies
View Related
Aug 21, 2011
On my machine I currently have 2 internal HD's - sata 3 & running in ahci mode. The bios confirms that they are running at 6G/s. For typical every day use, running apps & such, all seems fine & the machine seems speedy. But when I go to transfer large folders, (20G+) I'm only seeing 70M/s top speed, with 20 to 40 being the norm. (Shoot, I got 20M/s transferring to a usb 2.0 drive.) It doesn't matter if this is from partition to partition on the same drive (A or B) or between drives, or the direction.
So my question is, shouldn't this be giving a LOT faster speeds? Even if the drives ARE at the low end of the speed chart, per say? (WD CAVIAR BLUE 500G & 250G 7200RPM) This also doesn't matter what OS's I'm using either. Also, what ARE the the real world speeds on this? What are YOU ALL getting?
View 6 Replies
View Related
Nov 2, 2009
I have a problem i.e; how to install real player in fedora linux 5.
View 1 Replies
View Related
Mar 7, 2011
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
View 1 Replies
View Related
May 10, 2010
I'm so sorry to bother people, but I'm totally at a loss.I've searched the forum and have not found the answer.My NetworkManager icon is missing from the notification bar. Ive tried rt clicking on the top panel >add to pannel>notification area....yet it is still missing.I know that NetworkManager is installed, yet I cant even access it to connect to a wireless network. I'm able to connect to Eth0.I cant tell if my wireless card drivers are setup or not and if that makes a difference.
View 4 Replies
View Related
Oct 16, 2010
i am trying to install real player in linux but it's showing that it;s already installed after using its rpm
but no icon is there..
View 5 Replies
View Related
Mar 23, 2010
what the recommended way to set up real-time (or near real-time) folder synchronization among 2+ servers. I looked a rsync but that doesn't sound real-time and it looks like its something that you might put in a cron once an hour.
View 1 Replies
View Related
Dec 18, 2010
I am using fedora 14 and after i have installed RealPlayer11GOLD.rpm , i didnot work and it give me the following error
./realplay: /opt/real/RealPlayer/realplay.bin: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
View 14 Replies
View Related
Mar 23, 2011
I'm using a fedora install mainly for audio work and have everything working well out of the box. My setup is simple:
-Direct cable from Guitar 1/4" > Sound Card input>Rakarrack Guitar Effects>Ardour>System Out
(Occasionally I put a synth/plugin like Zynaddsubfx or jackrack before or after rakarrack depending on what sound I'm going for)
-Jack for all audio transport with synthesizers
I have real time support with Jack and all other programs except Rakarrack. When I launch Rakarrack in the terminal, I get this message:
Code:
rakarrack 0.6.1 - Copyright (c) Josep Andreu - Ryan Billing - Douglas McClendon - Arnout Engelen
Try 'rakarrack --help' for command-line options.
Cannot lock down memory area (Cannot allocate memory)
Cannot use real-time scheduling (RR/15)(1: Operation not permitted)
AcquireRealTime error
However, running rakarrack in root does not display this output, and I assume it has no problem getting real-time scheduling in that case. I did some google searches but the only similar issues that I find are that people can't get RT support in jack except in my instance, I do have RT scheduling with jack, but for some reason I can't get it in rakarrack unless I'm root.
[Edit] I actually have to run jackd and rakarrack in root to get rakarrack to use real time scheduling. But, it isn't necessary for any other jack compatible program that I know of. I'm actually not getting any real time scheduling with any jack application, even though Jack is reporting to be running in Real Time. However, running everything in root fixes the issue even though I would prefer to not have to run as root.
View 2 Replies
View Related
Jun 11, 2011
i am not sure if this hardware section is the proper place to put this question but my problem is like this. I want to record headphone mic input in a local file every time my system boots up and broadcast the real-time audio or rather multicast it through local LAN
View 1 Replies
View Related
Jul 7, 2011
I`d like to know what happens when with the disks the we include in the installation process of Fedora 15.Obviously, the HD we choose to be the system is entirely formated and reconfigured. But what about the others?hat does happen to them? I`m asking this because I have included two brand new disks of 2 TB, one of them with 900.000 files and the other empty, both of them formated with ext4, and completely functional on Fedora 14.However, after the upgrade, in the very first Fedora 15 boot, these disks disapeared from "places", and could not be mounted even via terminal. Opening the Gnome Disk Utility, I found out they had been changed to VLM (instead of ext4) and that they also lost their original lable. I am starting to be concerned because all the data there was important to me.
View 3 Replies
View Related
Aug 21, 2009
After a motherboard crash I have a problem. i have a LVM2 partition that is placed on 2 different physical disks that i need to read. Since I am pretty new to Linux/Fedora a friend helped me to install the system on my old system so i am not sure if the disk is formatted as ext2,ext3 or xfs. How do I mount these 2 disks to be able to read the files? when i run fdisk -l I got:
[code]...
View 2 Replies
View Related
Oct 26, 2009
I am setting up my first disk share between linux machines using just mount to test ( as with mounting win disks) and it doesn't mount. I get messages like "special device - does not exist" Should I be doing fstab entries from the start or what should I do?. One machine is F11 the other f10 if that makes a difference. I can link one linux to windows on the other machine.
View 8 Replies
View Related
Nov 4, 2009
I have 600GB striping disks with 3 ntfs partitions, 2 ext4 partitions and 1 swap partion containing ubundu 9.10 and 120 GB free space. When I try to create new ext4 partitions with the fedora dvd I get the message: Could not allocate requested partitions. Not enough free space on disks, no matter how small the partitions I try to create. I created logical partitions.
View 3 Replies
View Related
Nov 18, 2009
Fedora 12 seems to have made all my ntfs disks and partitions into LVM Linux (whatever that is) In all the time i've used other distros I've never seen this before .... I m getting them back to original state and accessable again, but have no idea what to do.....
[Code]....
I need help with:
1. get them back to original partition system
2. get them mountable
A question though, the information/files i had on these drives/partitions is it lost ? or is it still there?
View 7 Replies
View Related
