Fedora Hardware :: Can't Configure Wacom Ultrapad
Feb 16, 2010
I've been struggling for 3 days getting my Wacom Ultrapad to work, but without any sucess. I've searched the web but I haven't found any relevant information regarding to Fedora 12. Only some similar problems with other distributions but unfortunately those didn't help. I've also searched the guides and forum posts on "The Linux Wacom Project" without any succes.
The standard hal and X server self config doesn't detect it. So I tried with creating a /etc/X11/xorg.conf file. Basically I took the self generated xorg.conf file and added the appropriate entries:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code]....
I'm completely out of any more places to look for information regarding.
View 3 Replies
ADVERTISEMENT
Feb 4, 2010
I have a wacom graphire3 tablet and two monitors. The tablet is workin properly with out of the box drivers.
As well as the dual monitors configured as twinview through Nvidia X server. But the tablet is mapped for the two screens, then I searched the forums for a proper configuration and it it tells me to edit the xorg.conf file for twinview horizontal but, it don't make any difference. I've "sudo gedit" edited the xorg.conf and nothing happens. Nothing, the tablet is working properly, the system is stable and it's still mapped for two screens.
What can I do? The xorg.conf also isn't listing all my hardware, I can't see the confs for my mouse. I'm on karmic koala.
View 3 Replies
View Related
Jan 31, 2011
A few weeks ago, I was configuring my wacom tablet with the Wacom Control Panel by QB89Dragon, and suddenly xorg crashed. I remember specifically that I was modifying the pressure curve of the pen when it crashed. The screen went black, but the computer stayed on. Since then, every time I start up ubuntu normally, it would show the splash screen, but would then drop me to a black screen. But if I boot up under recovery mode, failsafeX, and generate a new x configuration, and restart X, it will work fine until I restart.
I've tried looking for an xorg.conf, but since I'm running 10.04, I guess it doesn't use an xorg.conf anymore. I tried uninstalling the program I used to configure it, but no go. I tried generating a new configuration with the tablet unplugged, with the tablet plugged in, even with a different tablet. And, since nothing is ever that simple when I do something wrong, nothing so far has worked.
View 3 Replies
View Related
Sep 1, 2010
I have had a wonderful Wacom Bamboo Pen and Touch tablet, and so far it has only worked on my Windows partition.
This being a fairly new tablet model I'm not too surprised that it doesn't work out of the box on Fedora 13. Though several hours of Google last night tells me people have managed to force it into working using some xorg customization and fairy dust work on wacom.ko.
From here directions get vague (usually found amid bug reports -- this one specifically [url] at least one specific problem is the the tablet does not pick up wacom as its driver. In fact it doesn't see anything at all as its driver.
more /proc/bus/usb/devices produces:
Code:
I just don't want to kill my xorg.conf any more with edits it doesn't like.
View 14 Replies
View Related
Feb 2, 2011
I am thinking of getting a graphics tablet for my Fedora box, probably a Wacom Intuos4 or a Bamboo Pen and Touch. I'm looking at those models simply because they seem to be the most popular ones out there. Before I buy I want to know if they work with Fedora 13. The company seems to officially support only Windows and Mac. It is easy to find the drivers and install them? What graphics software do they work with? I've never had a graphics tablet before.
View 4 Replies
View Related
Feb 5, 2011
One set of instructions for the Xf86-input-wacom-0.10.10 had me restart HAL by killing it, killing related processes, and then starting it...
So we're basically on Day 2, 3, i forgot.... while processes run like a snail in Terminal.
Last 4 lines of so many that my eyes are burning just trying to understand what is going on.
Why is HAL taking half a week so far to do this?!
My processor is 2GHz, RAM at 2 Gigs, HD at half a TB, and I have *no* clue if this will work.
Has anyone here been successful with Fedora Core 14 and Wacom? Wacom needs to build a driver similar to Brother's Linux install tool, which basically asks you for your model and then auto-installs the incredibly complex tool.
View 1 Replies
View Related
Feb 10, 2010
I have recently bought a Wacom Bamboo Pen Tablet, and just as recently installed Fedora 12 KDE for its supposed "excellent tablet support".
Well, I have yet to see any of that. Unless the fact that I'm using KDE affects this (and I'm staying KDE, no more GNOME for me!), I see no reason why my tablet should not work. It was working fine in Windows Vista Home Premium 32-bit (though the last time I started up in Windows it said it didn't recognize the device).
None of the applications that I've heard implemented in Fedora to support tablets were installed, but then again they're all probably GNOME apps, am I right? Still, my tablet should at least act as a mouse? I checked KPackageManager, and it said that the latest linuxwacom driver was installed. So why isn't anything working?
It seems as if everything - all this talk about tablet support in F12 - is just for GNOME. About the only thing working with my tablet as I type this is the status light, which indicates it being recognized as a USB device, and it flashes like it should when I tap the surface with the pen, but it seems as if there's nothing to receive the input. I even installed the latest GIMP, and when I checked Input Devices, nothing relating to the tablet was even there! At least on Windows it showed the Pen and the non-existent eraser, though neither worked properly, but it seems as if Fedora 12 doesn't even know it's there!
I shouldn't have to change anything in xorg.conf, because I thought that linuxwacom did it for you?
View 6 Replies
View Related
Jun 12, 2010
I'm looking for a decent program to take notes on my Lenovo tablet laptop. What's your favorite?
View 1 Replies
View Related
Mar 22, 2009
im trying to use my wacom tablet with fedora 10. I have looked around the net trying to find a simple way to install the driver but it is all rather technical would some one be able to give me a basic how to it would be great
View 2 Replies
View Related
May 31, 2010
I've just installed Fedora 13 and I have a question. How do I tune my tablet? I've tried to set threshold and aspect in xorg.conf just like in Fedora 11, but it doesn't work in the current release.
Here's a part of my xorg.conf:
I also tried 'xsetwacom' command, but I get errors.
View 1 Replies
View Related
Nov 30, 2009
I upgraded to Fedora 12 right after release, everything was working fine until update on previous weekend. Looks like it updated Wacom drivers and kernel. Now what I have. I hotplug my tablet in USB, and everything seems fine, I can position a cursor and press buttons, but after I press some button it hangs (LEDs on tablet are responding) I must remove Stylus from proximity in order to make it respond again (while stylus is away LED on tablet switches off for a fraction of second).
If I move mouse during tablet hanging, applications barely respond and if they are it is like mouse button is pressed (selecting text). I tried wacdump, and it's reporting everything's fine (X,Y, Tilt, Pressure everything shows up). I couldn't find evidence that wacom driver is controlling it, but I assume if wacdump is reporting then it is. I have:
Kernel 2.6.31.6-145.fc12.x86_64
linuxwacom.x86_64 0.8.2.2-15.fc12
I didn't touch xorg.conf in sense of tablet, but it worked for me in F11 and until now. I'm trying to make least manual configurations possible. Through exploring /proc/bus/usb/devices and kernel messages I confirmed that wacom drives is handling the tablet. And I noticed that in X's log
(II) config/hal: Adding input device Wacom Intuos3 9x12
(**) Wacom Intuos3 9x12: always reports core events
(**) Wacom Intuos3 9x12 device is /dev/input/event8
(**) Wacom Intuos3 9x12 (Wacom Intuos3 9x12) is not a pad
(**) Wacom Intuos3 9x12 is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 9x12: reading USB link
(**) Wacom Intuos3 9x12: threshold = 61
(**) Wacom Intuos3 9x12: max x = 60960
(**) Wacom Intuos3 9x12: max y = 45720
(**) Wacom Intuos3 9x12: max z = 1023
(**) Option "BaudRate" "9600"
(**) Wacom Intuos3 9x12: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 9x12" (type: Wacom Stylus)
(EE) Wacom Intuos3 9x12: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Intuos3 9x12"
(II) UnloadModule: "wacom"
(EE) config/hal: NewInputDeviceRequest failed (1)
I've encountered quite similar error in openSUSE when was configuring tablet manually in xorg.conf. As I can see problem is with "pad" device, which I disabled in openSUSE in order to make X running. So why is it not working?
View 6 Replies
View Related
Jun 17, 2011
I recently purchased a Wacom Bamboo Pen Only (CTL-460). It's a great device and in Fedora 15 (x86_64) it worked out-of-the-box like a charm!
I don't miss the rubber or the extra keys on the tablet. But I'm having quite some trouble, using the pen as a mouse replacement in all day use. The following is with respect to usage outside GIMP and Inkscape (i.e. Firefox, Nautilus etc). What I would really like to have, is:
+ scrolling by pressing the "first button" and simply _moving_ the pen. Just like with my Thinkpad-Trackpoint: Here I press the middle key and can then scroll just by controlling the Trackpoint. Would already be cool, if I could scroll by pressing the "first button" and touching the tablet. A short tap while pressing the "first button" should still be a "middle click"!
Code:
Found a solution for "jamming at the edge of the screen". Just resized the "area" a bit (smaller) with xsetwacom...
View 1 Replies
View Related
May 12, 2010
I just upgraded to Lucid and reinstalled Wacom driver for my CTH-460 Bamboo, but I cannot set Button1 to PagUp..... I tried these cmd:
1) xsetwacom set "Wacom BambooFun 2FG 4x5 Finger pad" Button1 "key core pgup" But I receive msg: Invalid key 'CORE'
2) xsetwacom set "Wacom BambooFun 2FG 4x5 Finger pad" Button1 "core key pgup" (swapping core and key keywords) But I receive msg: Invalid key 'pgup'
I tested also using pagup instead of pgup with the same results; so I used xsetwacom list mod in order to see which modifiers could be used, but unlikely i got the msg: unknown argument to list
UPDATE: If I send xsetwacom set "Wacom BambooFun 2FG 4x5 Finger pad" Button1 "CORE KEY ALT F2" all works fine! I'm lost.
View 2 Replies
View Related
Apr 11, 2011
Following instructions at [url]
Though, i downloaded and built linuxwacom-0.8.8-11
completes without any problem, then copy
Does this mean the module isn't working?
View 1 Replies
View Related
Mar 24, 2010
I got a bamboo tablet, CTL-460. Supported under linux wacom project. The hardware ID from lsusb is below:
056a:00d4
I also added this line to the right file. (ATM i forget what that file is, but i'll edit it later.) This was found in other posts on forums.opensuse.org
KERNEL=="event*", SYSFS{idVendor}=="056a", NAME="input/%k", SYMLINK="input/wacom"
My question is, now what? the other posts involved recompiling the drivers, kernel, and mixing files and stuff like that. I'd prefer to avoid compiling anything, and use you use X11 wacom packages, which I currently have installed.
I did try editing Xorg.conf to what the official how to says, and it just flat out failed, had to roll it back.
I Figured xorg or one of those similar files has to be edited, modprobe must be probed, and then something to start the tablet when plugged in?
I did try to compile the kernel and stuff, but it was very confusing and didn't work either, clearly.
Anyone here actually gotten the CTL-460 to work? If so, mind posting your xorg.conf and any other files?
View 2 Replies
View Related
Jun 4, 2011
Hello, I have a wacom bamboo pen tablet that was working great until recently. Now when ever I touch the stylus to the tablet it causes the cursor to freeze and lag behind. Running 10.04
View 7 Replies
View Related
Aug 31, 2010
I just got my first ever tablet yesterday and was very eager to set it up...but after spending all day yesterday and today reading various tutorials, I am still at a complete loss as to how to set this up. I have installed the drivers. Apparently, though, I also need to edit a config file to get it to work - a file that I do not have. It's supposed to be either /etc/x11/xorg.conf or /etc/X11/xf86-conf. But I do not have this file...and I don't know what I'm supposed to do.
I'm getting frustrated now because I've never really had hardware issues with Linux before, but getting a tablet was a huge deal for me as a digital artist who feels like an amateur just because I could never afford one...and to have it sitting on my desk for two days unable to use it is very depressing.
View 2 Replies
View Related
Feb 24, 2010
I can't get tablet working under slack, the problem probably is just that no input device gets created. I compiled the driver myself (slack seems to come without wacom driver...).
Here are my settings:
xorg.conf:
Code:
Indeed, /dev/input/wacom does not exist. The control LED on the device is flashing and reacting to the pen.
View 10 Replies
View Related
Aug 27, 2010
I am trying to get my Wacom Bamboo Pen tablet to work on my Ubuntu 10.04 installation. Right now when I plug it in the light lights up and gets brighter when I touch the pen to the surface (as it should), but the mouse does not move. I have installed xserver-xorg-input-wacom package. In researching the problem, I found this thread:[url]
But when I downloaded the kernel driver mentioned in that post, it told me that it was only for xorg servers previous to 1.7, and that I was running too recent a version. From what I can tell, the "proper" version for my xorg server is the version I already have installed from Ubuntu. I am not sure what to do now... should I try to compile the newest driver in the 10.* series from linuxwacom, despite the fact that it seems to be only one minor version away from the current installation I have?
View 1 Replies
View Related
Jan 15, 2010
I recently purchased a Wacom Bamboo CTH-460 and have had endless frustration trying to get it to work.
I started by getting the latest stable source from the Linux Wacom project and trying to compile the drivers and kernel modules from source and installing them, though nothing ever seemed to work. If I do lsmod it shows that the wacom kernel module is loaded but when I do more /proc/bus/usb/devices I end up with this:
And no matter what I try it always says Driver=(none). So that means none of the /dev/input events are getting any data from the tablet, which means there's no way for it to do anything with X. So that is the step I am stuck at.
After some time I came to suspect that perhaps the CTH-460 is too new to be supported, and am now trying to compile drivers from the lastest development source realeased on 12-30-09. It said there was support for 5 new Bamboo tablets. However when I try to make the driver I run into this error:
I'm not sure if that is just an error in the make script or not, and if it is, why no one else has said anything about it.
Maybe I'm going about this all wrong, do I even need a new kernel driver for my tablet model? Do I only need an Xorg driver? What modules and drivers need to be in place before I should at least get the tablet tied to an input event?
View 4 Replies
View Related
Jan 7, 2010
The Linux Wacom Project It says that"December 15, 2009 - Updated serial Tablet PCs support. Added 5 new Bamboo tablets support. - kernel patch submitted by K Gingerich. - xorg by Enrico Ros <enrico.ros@gmail.com. Label 0.8.5-7½. So I install the newest driver(0.8.5-8.1.x86_64) in the opensuse 11.1 x64 from the opensuse.com,but my bamboo pen doesn't work.I run "wacomcpl",there is no device to choose. then I open the file " etcudev ules.d60-wacom.rules":
[Code]...
The idprodut of the Bamboo pen CTL-460 is 00d4, I can't find it in this file. Can this driver support the bamboo pen
View 5 Replies
View Related
Apr 9, 2011
as a kind of luxory item I am thinking of adding a bamboo to my PC. Before putting action behind this, I wonder how much of a hazzle this brings about. Has anybody of you experience with 11.4 in this field? If a hazzle: Can anybody be bothered to compile the driver and provide it as a 1-click on the build service - or even in the official repositories? Would there be full functionality actually after all? BTW, I am aware of the wacom SF-site.
View 9 Replies
View Related
Mar 6, 2010
My Wacom tablet's cursor skips around the screen and makes it impossible to use. Is there a way to use wacom-tools (wacomcpl) to fix this? Or, is there any known way to fix this?
View 4 Replies
View Related
Apr 20, 2010
Quote:
The new Wacom Bamboo Pen (CTL-460) doesn�t work in Ubuntu Lucid out-of-the-box. You need a newer kernel module than the one that comes with Lucid by default. It�s pretty easy to get it working though, you just need to know how.
First, install some compiling tools and header files:
Code:
Code:
Now unpack, configure compile and install it:
Code:
# I know this is the wrong version, but it's the highest available and it works
Code:
The tablet should work now. You can also add the module name to /etc/modules to automatically load it on boot.
He also says (and I can confirm) that the gray lines are the new borders of the tablet. A little annoying, but I imagine one could configure that, too.
View 9 Replies
View Related
Apr 29, 2010
I have a wacom pen and touch tablet and am running 10.4 what is the easy way to install and get it working?
View 9 Replies
View Related
Jul 16, 2010
I've sifted through the forums, tried various how-to's and still am unable to get my intuos 4 working properly in Ubuntu 10.04x64. It's recognized as a device, and the driver seems to be loaded however I don't see anything when I type in "wacomcpl". Furthermore, when I move the pen, it reacts but as soon as I push down on that pad (as a mouse click), it freezes the cursor. When I push down again or push a button it will free the cursor until I release a button. Then it freezes again.
I'm currently using xorg.conf for my configuration.
When I try using "xsetwacom", I receive:
Error (2): WacomConfigOpenDevice: No such device
I've tried compiling and replacing wacom.ko but doesn't seem to affect it.
View 9 Replies
View Related
Sep 15, 2010
When I switch my KVM over to my Ubuntu box, the Wacom tablet causes X to crash about 1 out of every 4 times. I will usually see what I'm supposed to for a split second, get a blank screen and/or command line for a second, then I'm back at the login screen.
Xorg.4.log: (EE) Wacom Graphire4 4x5: Error reading wacom device : No such device
If the tablet is plugged directly into the KVM, it crashes every time. Instead, I have the tablet plugged into my Mac laptop, which is itself plugged into the KVM (TrendNet USB w/audio).
View 3 Replies
View Related
Oct 13, 2010
I have a Fujitsu Stylistic st6012 tablet with a wacom digitizer built in. With UNE 10.04 the stylus was working fine, the buttons/rocker did left and right clicks.After upgrading to 10.10 the stylus was still working, but the buttons were not.I could click by tapping with the stylus, but to access menus in applications, or even shutdown menu, I have to keep pressing the stylus against the tablet. If I just tap, the menu will appear for a brief millisecond and then disappear again. Like what happens when you double-click with a mouse.
After some searching I have managed to get the stylus buttons to work - setting button closest to the tip as leftclick and the other as rightclick.The clicking works as expected inside applications, and when the applications menu-bar is on a line of its own - not on the same line as close, minimise, maximise, tray-icons, shutdown... In applications where the menu is moved up on the same line as close/minimise/maximise.the clicking must be done by click-hold - if I click-release the menu would go away.So that is problem number 1. Not sure if it is Maximus that is creating the top panel?
Next, the even bigger problem:The leftside icons menu introduced with UNE 10.10 is not behaving well with my stylus.Sometimes the very first tap/click on an icon launches that application. Subsequent taps/clicks on ANY icon does nothing. Only nudges the icon,scrolls the bar slightly or nothing at all.Other times not even the first tap/click launches anything. This makes the OS and my tablet utterly useless After getting the stylus buttons to work, rightclicks actually works on the icon-bar (unity?), bringing up the menu with name and Remove from Launcher options. But it does not respond to taps or leftclicks - other than making the rightclick-menu disappear.NOTE: the icons-bar and menus work as they should using an external mouse, so the problem must be related to the wacom stylus.
Here is some values from xsetwacom:
kris@kris-st6012:~$ xsetwacom --get "Serial Wacom Tablet" TPCButton
on
[code]....
View 6 Replies
View Related
Apr 3, 2011
I finished installing a Wacom Bamboo CTL-460 pen & tablet (USB) and it's working. THing is, I'd like to know where/how I can configure what the buttons do. According to my g/f, while browsing she could hold down the equivalent of the mouse's left-click button and use that to quickly scroll down (kind of like the middle button in the mouse but holding it down).
View 1 Replies
View Related
Feb 10, 2010
I am attempting to set up a wacom bamboo tablet with ubuntu 9.04 (latest version for netbooks).
I have followed howto advice however i have failed to produce the wacom.ko from the downloaded driver. The driver from the Linux wacom project is "linuxwacom-0.8.4-4.tar.bz2"
There appears to be a problem when i use ./configure --enable-wacom thereafter make and install fail to produce the required files. Below is the message when configuring the file.
*** WARNING:
*** Unable to guess kernel source directory
*** Looked at /lib/modules/2.6.30.5-ep0/source, /lib/modules/2.6.30.5-ep0/build,
*** /usr/src/linux, /usr/src/linux-2.6.30.5-ep0, and
[ode]....
View 1 Replies
View Related
