Fedora :: FC12 Installation Paused And Not Continuing

Feb 25, 2010

When I install Fedora core 12 from DVD (I downloaded iso file from Internet and burned it to DVD). After the first screen display, I choice the first command (and the other time, I choice the second), and then, the installation began. But, about 1 minute after, the installation paused (may be stopped) and never continue. I don't know why. I installed Windows 7 before and I want to install Fedora 12 as a second OS. My laptop is HP Pavilion dv4.

View 1 Replies


ADVERTISEMENT

Fedora Hardware :: Printer Paused Or Not Connected Message In F15

Jul 28, 2011

I am using a Toshiba Satellite with an HP Officejet7410. I installed the printer last night, printed a test page and went to bed smiling. This morning, I try to print and nothing. Fedora see the printer, but keeps saying it is paused or is not connected. The test page printed out the following.

Officejet-7400-series
HP Officejet 7400 series
franks-lappy
HP Officejet 7400 series, hpcups 3.11.5
8.50 x 11 inches
0.12 x 0.12 to 8.38 x 10.88 inches
3 x 3 to 213 x276 millimeters
hp-officejet 7400_series, ppd
hpcups 3.11.5
This page was produced by CUPS 1.4.6

View 13 Replies View Related

Fedora :: Whenever Skype Makes A Sound Contact Logs In Or Out - Rhythmbox Puts Itself Into Paused Mode

Dec 1, 2009

I recently started having a strange problem: whenever skype makes a sound, e.g. when a contact logs in or out, rhythmbox puts itself into paused mode. this is even reproducible. when I go in to the skype settings, sound devices, and click on "Make a test sound", rhythmbox pauses whatever song it's playing. here's some debug output:

[Code]....

View 14 Replies View Related

Fedora :: Circular Package Dependencies - Error "gcc-4.4.2-7.fc12.i686 Requires Libgomp = 4.4.2-7.fc12"

Apr 18, 2010

I have a tricky problem which I could soIve with a c program. I wrote one and found I didnt have gcc so I tried to install it. I was told I needed to install packages. I acknowledged and an error was generated gcc-4.4.2-7.fc12.i686 requires libgomp = 4.4.2-7.fc12 I try to install libgomp and go round again.

View 2 Replies View Related

Fedora Installation :: Why 13 Clean Installation Ends Up To Lots Of Fc12 Packages

Jun 1, 2010

I did a clean install of fedora 13 on my sys, however when i run

Code:

rpm -qa |grep fc12

lots of and lots of fc12 packages pop up. below is the list. if there is fc13 version of these packages, and if there is (which I suspect for at least some of them there should be) why my sys doesn't update to those packages?

here is the list of fc12 packages:

Code:

~$ rpm -qa |grep fc12
ctan-cm-lgc-fonts-common-0.5-17.fc12.noarch
plexus-compiler-1.5.2-4.3.fc12.noarch
texlive-texmf-errata-fonts-2007-7.fc12.noarch

[code]....

View 5 Replies View Related

Fedora Installation :: Upgrading The Fc12 To F13?

May 13, 2010

I'd like to reproduce the way I got to f12 from f11, but obviously to f13 basically I started out on the f11 rawhide repos, then as f12 got released a yum update updated my fedora-release and then hey presto I was automatically upgraded to f12 final release if I now turn on my rawhide repos, as f13 is nearing completion, will I be updated to the latest f13 release (RC3 I believe) and then as f13 gets released my fedora-release will be updated and i will then be upgraded to f13 final as happened before?I don't want to download a whole dvd iso and then upgrade when f13 is final, I'd like to do a gradual transition ie..

f12 -> f13 RC3 via rawhide
f13 RC3 -> f13 Final via yum update

View 2 Replies View Related

Fedora Installation :: New FC12 Kernel Will Not Boot

Nov 17, 2009

I just upgraded to Fedora 12 x86_64 via yum upgrade. However I have problems with booting. The new FC12 kernel won't boot. Boot output is something like

Code:
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sda to RAID set "sil_ajabaccaaidg
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdb to RAID set "sil_ajabaccaaihe
No root device found Boot has failed

I resized boot partition to 400MB, formatted it as ext4 and recopied all files, modified fstab to update boot partition's UUID. Tried to set a boot flag on boot, still, I can only boot with the old kernel from Fedora 11. Is it a Fedora 12 kernel's bug or something wrong with my setup? I don't use any RAID, and the sil error is present with Fedora 11 kernel also.

View 1 Replies View Related

Fedora Installation :: Using The Live-CD To Install FC12-RC4?

Nov 17, 2009

i am not sure where to post this issue since i am using RC4 of FC12 so posting it here.I am using the Live-CD to install FC12-RC4, it is gnome x86_64. The issue is as follows:I never had this with OpenSuSE. Mandriva & Ubuntu all of which is the latest release. Why the installer has to initialize the hard disk?

View 9 Replies View Related

Fedora Installation :: Upgrade From FC6 - FC12 Woes?

Nov 28, 2009

I decided to upgrade finally. It didn't go smoothly and right now I'm not really sure what is going on. During the install when it was scanning my disks it threw a timeout error but continued anyway. I completed the install but one thing that seemed odd to me is that I wasn't asked about packages or anything and it never prompted me for any other CDs. I wasn't sure what was going on. I did a re-install but same results.

So I figured fine I'll just configure things myself. I went to mount my other partitions and was unable to. I'm not sure what was done but I've not been able to get to my old data. I'm not even sure where to start because things are so different. I ran fdisk -l and I see these devices:

/dev/sda
/dev/sdb
/dev/dm-0
/dev/dm-1

Under /dev/sda It shows /dev/sda1 but tells me that partition 1 does not end on cylinder boundary it then shows /dev/sda2. This has a System of Linux LVM. Same with my /dev/sdb1. I am guessing this is where my 2 old partitions went. I looked up LVM which I didn't know anything about before. Previously I was about to mount my partitions directly so I'm pretty sure they were not LVM. So somehow these got converted?

I don't know what /dev/dm-0 and /dev/dm-1 are but I do get errors on them:

Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1 doesn't contain a valid partition table

Right now I'm trying to simply get to my data once again or determine if it's unrecoverable. At this point I'm at a loss as to how to proceed. I know I didn't tell the install to format anything other than the first partition. Oh and after the two Fedora installs I did take a peek at Unbuntu. I started that install and it told me that the partition I was installing on was too small. So I canceled it. It showed the other partitions but I could see no way to read them.

View 7 Replies View Related

Fedora Installation :: 32-bit OS On 64-bit - FC12 / 11 With I586 Kernel On The Hardware?

Dec 10, 2009

I have some programs, that will only install on i586 architecture (opposed to x86_64). My CPU is 64-bit architecture. Can I install FC12/11 with i586 kernel on the hardware? How? Any disadvantages except the fact that I'm supposedly not able to use the 64-bit feature of the CPU?

View 3 Replies View Related

Fedora Installation :: Fc12 Still Has And Still Picking Up Fc11 Packages?

Mar 4, 2010

What to do? After preupgrade and update fc11->fc12, system has a mixture (oh yeah) of fc11 packages and fc12 new ones. Dependencies problems, and even by removing, reinstalling packages sometimes it's picking up fc11 ones.I tried yum clean etc to no avail. Is there any script or anything to solve this automatically? I suppose the solution is to manually erase all the fc11 packages (assuming they are really installed and not simply reported as such)?

View 14 Replies View Related

Fedora Installation :: How To Get Kernel-devel-2.6.32.11-99.fc12.i686

May 21, 2010

Use 2.6.32.11-99.fc12.i686 kernel,

A package needs same kernel source to build.

Add/Remove Software show only: 2.6.32.12-115.fc12... & 2.6.31.5-127.fc12...

How to get kernel-devel-2.6.32.11-99.fc12.i686?

View 1 Replies View Related

Fedora Installation :: FC12 To FC13 Upgrade Woes?

May 26, 2010

Took an FC12 system to FC13 via 'preupgrade'There was a REALLY old version of gimp-print-cups in RPM, and the installer announced "a fatal error occurred". However, everything else seemed to download properly and I allowed the upgrader to reboot the system.

a) grub boots the kernel, then the kernel can't find root and panics. It does this because it can't root file system with root=UUID= kernel option. If I manually tweek the grub line to use root=/dev/sdx, kernel finds its root and boots up to the next problem.

b) GUI environment not launched. Init scripts die on "error loading modules.dep". Sure enough - one is not there. Ran "depmod" to generate it ,and rebooted. System reboots into GUI, where I login to find the next problem.

c) Evolution won't start. Reason turns out the evolution-data-server from FC12 is still present. Did a check on just how many other FC12 RPM's are present: 1100. Yeah - over 1000. About 850 of the FC12 RPM's also had FC13 replacements installed. Did an "rpm -e" on these. Also had to do some remove action on mkinitrd, nash, plymouth-scripts-0.8.0, and parted-1.9.0 as there are replacements for these utilities under different package names. That cleaned up the system some, to present me with the next problem.

d) yum package repository still linked into FC12. Removed fedora-release-12-2.noarch and then I could "yum install" evolution and a few other packages properly.

I've done one other FC12->FC13 upgrade today, and that went flawlessly. So, I think in general the upgrade works fine. It just looks like if preupgrade finds anything amiss, it doesn't take care of a lot of things and generally leaves you with an unbootable mess to clean up.

View 6 Replies View Related

Fedora Installation :: 13 Upgrade: Remove Fc12 Packages?

Jun 7, 2010

I had a fairly smooth upgrade process using PreUpgrade on my main workstation, but I still have a huge bunch of fc12, some of which have fc13 analogs installed, some of which don't (a total of 317 packages). Also, I still have the Constantine gdm theme, probably as a symptom of these lingering packages. Can I just yum erase these? Do I need to check which have analogs in fc13? I don't know which step of the upgrade I forgot, but it seems I'm stuck somewhere in between, although

Code:

joel@localhost: ~> cat /etc/fedora-release
Fedora release 13 (Goddard)

View 10 Replies View Related

Fedora Installation :: FC12 Kickstart Installation From CD

Sep 8, 2010

I have made the ks.cfg file with system-config-kickstart and placed it in the root Disk1.iso's root directory.I then made the Disk1.iso with the changes done and burnt the whole Installation image on a CD-ROM.The machine was booted with the the Disk1 and it went well till disk partitioning.Then suddenly installation halted with a message: "Unable to read package metadata. This may be due to a missing repodata directory. Please ensure that your install tree has been correctly generated.

View 3 Replies View Related

Fedora Installation :: Install Fc12 From A Hard Drive Partition?

Dec 2, 2009

how do I install fc12 from a hard drive partition? I downloaded thec12 dvd iso file...when I burned this to a DVD it wanted to install from my DVD and not a file on external media.---------- Post added at 08:03 PM CST ---------- Previous post was at 07:53 PM CST ----------this looks like it:[URL]

View 5 Replies View Related

Fedora Installation :: Upgrading To FC12 Due To Conflicts And Dependency Errors

Feb 17, 2010

I've been trying to upgrade my installation for some time now and just can't quite get it right. I would upgrade from the DVD but the installer hangs when it says "Looking for installation images on CD device /dev/sr0". However, that's not really my question. I've resorted to the upgrade instructions as found at [URL]. If I don't use the '--skip-broken' option it complains about the following:

abrt-gui-0.0.11-1.fc12.x86_64 from fedora
abrt-libs-1.0.6-1.fc12.x86_64 from updates
samba-3.4.5-55.fc12.x86_64 from updates
samba-client-3.4.5-55.fc12.x86_64 from updates
samba-common-3.4.5-55.fc12.x86_64 from updates
samba-winbind-3.4.5-55.fc12.x86_64 from updates
samba-winbind-clients-3.4.5-55.fc12.x86_64 from updates

If I use the skip broken option, it then complains about:
Transaction Check Error:
file /usr/share/locale/de/LC_MESSAGES/cryptsetup.mo from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
file /usr/share/locale/sv/LC_MESSAGES/cryptsetup.mo from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586
file /usr/share/man/man8/cryptsetup.8.gz from install of cryptsetup-luks-1.1.0-0.4.fc12.x86_64 conflicts with file from package cryptsetup-luks-1.0.6-7.fc11.i586

I can't seem to remedy this problem. There were other conflicts but I just removed those packages. When I attempt to remove 'cryptsetup-luks' it then tells me it's going to remove something like 200 others which did not sound like a good idea.

View 14 Replies View Related

Fedora Installation :: FC12 Install From Live CD - How To Make The Partitions

Mar 11, 2010

I'm trying to install from the Live CD. I read the sticky about needing a /boot and a / partition. I think that sticky applies to me but I'm not sure; once the Live CD loads, I click the "Install to Hard Drive" icon on the desktop. It thinks for awhile but ultimately doesn't display anything.What I'm not sure about is how exactly I go about making those partitions. My current HD is a Ubuntu system (Karmic Koala), and its network slowness has prompted me to try FC12. I've backed up everything already, I don't need to preserve anything on the existing drive.

I'm looking for the easiest way to get FC12 installed. Should I fool with the partitions? I just download a different install CD i.e. a non-Live one? If so, which one? Do I need all 5 or so CD images? I don't have a DVD burner so downloading the DVD isn't an option. I'm comfortable working from a Linux command line once the system is working, but I don't have much experience "close to the metal" i.e. actually getting a system up and running.

View 1 Replies View Related

Fedora Installation :: DVD FC12 Install / Upgrade Wiped Everything On Disk Old FC11

Nov 24, 2009

Was using preupgrade from FC11x64 to 12x64. Preupgrade caused alot of problems like /boot not enough diskspace. After some searching found the steps and preupgrade proceed happily but after reboot got kernel panic grrr.

Took 3 days to find another machine to download and burn the FC12x64 disk. So I booted via the FC12x64 disk and selected the 1st option to install/upgrade. I thought it is upgrade and so choose replace my existing linux system however it wiped out everything on the disk. I have some important data in my home directory. I think it is in LVM, not a partition like /dev/sda1. How can I recover them? Was using stock settings.

View 3 Replies View Related

Fedora Installation :: FC12 Via USB CDROM In External Enclosure - No Devices Found

Feb 3, 2010

Why is it that FC6 installs just fine from a USB CDROM in an external enclosure but FC12 boots from the CD asks to install or upgrade an existing system but then stops at no devices found and wants the install path for the install image? It appears to see the CDROM, boots then looses its mind and forgets a CDROM was attached.

View 13 Replies View Related

Fedora Installation :: FC12: Yum Update Then Boot Hangs / Preload Daemon?

Feb 17, 2010

Have had a clean perfectly working copy of 2.6.31.6-166 for months and after two updates to 2.6.31.12-174.2.3 and 2.6.31.12-174.2.19, neither of the newer kernel versions will allow machine to boot properly. Start-up hangs at the preload daemon with a flickering screen. To use machine, must use grub chooser and choose the original base kernel.

Running on Tyan h2000m board, opteron 2356, Nvidia 9800 GTX+ and 12GB of dram with SELinux security enabled.

View 2 Replies View Related

Fedora Installation :: FC12 New Install / Top Menu Panel Missing Items

Mar 7, 2010

First off, I have spent several hours searching this and other forums looking for an answer to this, and have tried several things, none of which have fixed this issue. Here is what I'm seeing:I performed a new install of FC12 on a Thinkpad R40, 512Mb RAM, with a 40Gb HDD, 38Gb useable, from a live CD. That leaves a little over 9Gb free for expansion. All went well with the install, but the post-boot upgrade would not complete due to an error with the abrt files. I found a thread discussing this and used the suggested method of performing the updates from a shell, which worked fine. There were LOTS of installations, updates, and replacements, and finally the shell returned "Complete!". After a reboot I was going through the Fedora_12_ User_ Guide.pdf and noticed many items missing from the System Menu as described in section 3.1.1.3 "The System menu". Another thread seemed to address a similar issue with su - then yum groupinstall "GNOME Desktop Environment", which I did. It updated over 870 items, then completed with no errors. At this point I logged out and back in, no change, and then tried a reboot, which also did not change anything. Finally, I'm appealing to the community.

View 3 Replies View Related

Fedora Installation :: FC12 Install Causing Kernel Panic Not Syncing Vfs

Mar 15, 2010

I had FC10 working nicely but decided to move to FC12 to be able to use the latest and greatest... Turning out to be nightmare!

My HDD is partitioned into three:

(hd0, 0) 100MB : used to be original /boot for FC 10
(hd0, 1) 120GB : /home
(hd0, 2) 30GB : /
> First thing tried: preupgrade

Using this preupgrade setup happend and asked to reboot. However, upton reboot got locked in stage2. So this option was abondoned.

> Second thing tried: installation CDs

Using this method formatted (hd0,2) and installed FC12 on (hd0,2). However, did not change anything on (hd0,0). This still held all the upgrade information from the previous trial. Now, when I rebooted after the install there was a kernel panic with error "kernel panic not syncing vfs". Thinking it might due to the (hd0,0) partition and errors in my install, I abandoned this.

> Third thing tried: installation CDs

Using this method I formatted both (hd0,0) and (hd0,2). The install was similar to above but now (hd0,0) was also formatted and after install was empty. But upton reboot I still got the "kernel panic not syncing vfs" message. I dug through google and saw references to problems in grub.conf and lo behold there were problems with my grub.conf. I don't see the initrd line at all nor do I see the initrd*.img file in my disk. The grub.conf is:

---
default=0
timeout=0
splashimage=(hd0,2)/boot/grub/splash.xpm.gz
hiddenmenu

[Code].....

View 3 Replies View Related

Debian Configuration :: Computer Hangs For 15 Seconds Before Continuing?

Aug 6, 2011

At boot time, my computer hangs for 15 seconds before continuing. This is the message that I receive:Starting the hotplug events dispatcher: udevderror binding udev control socket 1...(warning).Waiting 15 seconds and trying to continue anyway...(warning).

View 1 Replies View Related

Fedora Installation :: FC12 X86_64 Dell Optiplex 760 Install USB Keyboard Fail

Nov 18, 2009

When attempting to install FC12 x86_64 on a Dell Optiplex 760, my USB devices stop working after initial boot. I see anaconda, but am unable to change anything since my keyboard, mouse and any other USB devices are not powering up after kernel boot.

View 13 Replies View Related

Fedora Installation :: Upgrading To FC12 - Access Port 631 Through Firefox Wouldn't Open

Feb 8, 2010

I only began using Linux with the release of FC8. I've upgraded into every new version (upgrade, no clean installs), after the new versions had been out a while. I struggle with command lines, updates, cups and other very cool tools that are only difficult because they have so many options. I'm Windows guy at work, a system admin and db administrator, plus the company expert on Excel. But, all in all, I hate Windows, and I'm loving Fedora, even if I struggle.

This last upgrade really kicked me in the pants. The first thing I noticed was all of my software sources were gone. I did some research around the forum and tried a few things, but it's still not working. Unfortunately, I may have uninstalled Yum in the process, but not rpm. I've tried to re-install the yum packages, but still no luck.

This morning before leaving for work I noticed that a boot log indicated that cups had failed. I went in to restart the service (through gui) and it said it was running. So I stopped the service and re-started. I tried to access port 631 through Firefox and it wouldn't open. I need to check the firewall to see if it's an open port, but beyond that I don't know.

Now I'm wondering if I should just do a clean install. I haven't done this, mainly because I didn't want to hassle with setting up my printer again (although, it's a Brother and they have the drivers and good instructions), and I didn't want to lose any emails that I've received via Thunderbird. The printer is really a non-issue now, as I'll have to set it up anyway. I have a backup of the /usr folder and all the documents. Question is, if I restore the Thunderbird folder after a clean install, would it bring back my email?

View 3 Replies View Related

Fedora Installation :: FC12 New Install Network Manager Not Showing Activate Or Device?

Mar 17, 2010

I just brought up FC12 on our VSphere to begin testing..The nic did not configure properly for some reason.. I was able to go to command line, and do an "ifup ifcfg-eth0" and DHCP got an address. Go into GNOME - System-Administration - Network , or system-config-network the "Activate/Deactivate" is greyed out. Also, GNOME - System-Administration - Network Device Control show NO device..

View 1 Replies View Related

Programming :: Waiting For File To Copy Before Continuing Processing (Python)

Mar 25, 2010

I have a Python script that copies a couple of DLL's and EXE to a directory before running the EXE. It can be a fresh copy or the files can already be in the target directory and are then overwritten. The script uses shutil.copy() to copy the files and that works but as the files are copying processing continues and the script tries to run the files mid copy, causing an error.

I need a way to wait for the files to finish copying before the script continues. Putting the thread to sleep isn't good enough, calling os.system("copy ...") also doesn't work, using os.path.exist() won't work because the file will exist during the copy.

View 2 Replies View Related

Fedora Installation :: FC12 4 Monitor Video - Edit The Config File And Make To Other Two Work

Feb 9, 2010

I recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.

View 3 Replies View Related

Fedora Installation :: Yum Dependency Error: Package: Abrt-1.0.7-1.fc12.i686 (updates-testing)

Feb 20, 2010

i tried running (yum update, also yum install vlc) and i get these error

Code:

Error: Package: abrt-1.0.7-1.fc12.i686 (updates-testing)
Requires: librpm.so.0
Removing: rpm-libs-4.7.1-6.fc12.i686 (@anaconda-InstallationRepo-200911081854.i386)

[code]....

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved