Fedora :: Edit Label In Grub
Jul 28, 2011
I just installed Fedora15 on my Netbook, I find it simply the best OS for this kind of PC. Anyway I have a little problem, Before install Fedora, I installed Windows 7. Now when I start my Netbook, Grub starts countdown, so far so good, then I press any key to enter OS selector where Windows is shown under "other" I would like to know if I can change the label "other" in "Windows7". Also, can I remove the Countdown and make grub starts by let me select which OS I want to start?
View 4 Replies
ADVERTISEMENT
Mar 17, 2011
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Aug 12, 2010
I recently installed Fedora 12 on my system. I also have a Windows 7 running, which existed before the Fedora 12 installation.
When I start my computer, I get a screen that says 'Fedora is starting in 3 seconds' and I can either press a key to stop the boot or let it boot Fedora. If I stop the boot, I am taken to a 'choice screen' where I can choose between 'Fedora' and 'Other' with 'Other' being my Windows 7 OS.
Now, here's what I want to do. I want it to be so that, when I start my computer, I am directly taken to that 'choice screen' without the time limit or anything. And then I can choose which OS to boot. Also, is it possible to rename 'Other' to 'Windows 7' ?
How I can edit Grub in order to bring on these changes?
View 4 Replies
View Related
Apr 22, 2010
I dual booted Fedora 12 and Windows 7 and I have to hit the space bar in order to bring up the boot menu asking which OS to use. Then I see "Other" which is Windows 7, so how do I edit this to make it say Windows 7? This is what I see...
Grub edit> chainloader +1
View 14 Replies
View Related
Jul 20, 2011
[URL] my labtop can't adjust brightness by fn key. i updated bios to lastest version but i can't config grub becouse in fedora don't use grub2.
View 3 Replies
View Related
Aug 8, 2011
I'm using Fedora 15 on my Dell Inspiron 17R (dual booting with Win7) I'm trying to edit the GRUB menu after an update, but when I try to gedit the menu.lst file, I'm getting an error.
(gedit:1884): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting. Terminated Is this an error I can resolve? Did I do something to break it
View 1 Replies
View Related
Jan 31, 2010
I'm having trouble umounting partitions.
This is the entry I have in /etc/fstab for backup:
I can mount it ok:
But can't umount it:
View 3 Replies
View Related
Oct 12, 2010
i installed ubuntu inside windows but someone instead of uninstalling it directly deleted the ubuntu folder inside windows ,thinking that the partition will be deleted. but when i restarted the system and command prompt came and said unable to find boot record and i couldn't boot windows as well and a grub prompt came like grub>, then i inserted the windows boot cd and repair the boot record error but my problem is , instead of doing this way, can i do so by grub prompt directly without using winidows cd.
View 1 Replies
View Related
Nov 27, 2010
So I need to become the root user in order to edit a grub file in a seperate partition, so I can get back into this partition. How can I become and stay as root user in the desktop environment? (I know you shouldn't do this, but I need it.)
View 10 Replies
View Related
Jan 31, 2011
I'm trying to set up some shares on this pc and every time I try to edit the /etc/exports file I get this error. I get the same error when I try to edit /boot/grub.conf file or any other files. Does not matter what editor I use. I'm running f14.
View 3 Replies
View Related
May 18, 2011
I have 2 harddisks 1 tb and 160 gb. In 1 tb fedora is installed. In 160 gb windows is installed. 1 tb is the master. 160 gb is not being detected. How to edit grub.conf file to edit the menu?
The content of grub.conf is
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that all kernel and initrd paths are relative to /, e.g.
# root (hd0,1)
# kernel /boot/vmlinuz-version ro root=/dev/sda2
# initrd /boot/initrd-[generic-]version.img
#boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.35.6-45.fc14.i686)
root (hd0,1)
kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=bfc7d406-5ae3-4335-a2d8-37472dcfa7dc rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img
title Other
rootnoverify (hd1,0)
chainloader +1
View 2 Replies
View Related
Feb 18, 2010
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst
Here is what i have
Code:
title Debian GNU/Linux, kernel 2.6.26-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro quiet
initrd /boot/initrd.img-2.6.26-1-686
code....
View 4 Replies
View Related
Jun 2, 2010
I have to configure "Oracle Ent Linux 5" in different two server.
After installing the server ,I observer that the grub loader entry are different like:
Machine 1:
Machine 2:
Here , I don't understand the difference between 'LABEL=/1' and 'LABEL=/' .
View 1 Replies
View Related
Dec 23, 2010
after yesterday's update to kernel 2.6.35.10-72 my grub.conf didn't get updated and ll /boot shows that neither vmlinuz or initramfs exist for that kernel. uname -r though tells me I'm running 2.6.35.10-72.
How can I do that? and on another more reallystic matter how can I generate the missing files so I can manually update grub.conf?
View 2 Replies
View Related
Oct 13, 2009
I have a 21GB mounted partition /media/mydata. On my desktop it's labelled as "21 GB Filesystem". When I open it with Nautilus it's called "mydata". Is there a way of changing that label to "mydata" on the desktop?
View 2 Replies
View Related
Mar 23, 2010
So I ran a software in both KDE and Gnome respectively and it seems both of them have separate displays. By that I mean, one is displaying a part of the string(a Label) and the other is not displaying the string at all. I will include some relevant information such as the software uses SWT kit. Also the string is displayed perfect in Windows. If it's still not clear I will sum it up in a sentence. I am trying to display a label using SWT kit and, its being displayed correctly on Windows,partially correct on KDE(Half of the string) and not displayed on Gnome.
I have tried GridDat.grabExcessHorizontalSpace=true, but it didn't. how to approach the problem otherwise?
View 3 Replies
View Related
Jan 1, 2010
If you know Slackware you know Linux. If you know Red Hat you only know Red Hat".Now I made a decision to install Slackware near Ubuntu and Xp.I've installed Slackware with LILO.Well LILO didn't add Ubuntu.So I needed to install from a LiveCD GRUB.Now I've got another problem:GRUB didn't add Slackware.I made a research and realised that I must to edit /boot/grub/menu.lst. This is my hard disk(XP:sda1,sda5;Ubuntu:sda7,sda8;Slackware: /->sda9 /home->sda10): [URL] This is general code for adding an OS to GRUB:
title Slackware
root (hd0,x)
kernel /<vmlinuz_filename> ro root=/dev/hda<partition>
initrd /<initrd_filename>
[code]....
How can I find initrd for Slackware and I'd like to know how I must to write correct code to add Slackware to GRUB?
View 8 Replies
View Related
Feb 25, 2010
Under both Windows and Fedora 11, my USB flash drive was mounted using the volume label of "RBR Astro". Under Fedora 12, it now gets mounted as "RBR ASTRO". I like my old case. It's a small nuisance, but it also ended up breaking all my links to files/directories that I store on flash. How can I get the flash to mount while preserving case?
View 2 Replies
View Related
Jul 4, 2011
how to wrap the text in the overview for the icons I tell you I love opensource. Straight from some of the guys who wrote gnome shell, and yes the reason it was left out by default is because it has some quirks. Yes it wraps text - however if you have long words - like this_file_has_no_spaces then it will overflow into the icon on either side of it. But most application names have spaces. The obvious place you will see this happening is in recent items where that displays system files etc. The other issue is that when you hover/highlight an icon it will only highlight the first line of text. That's pretty much it and with a few lines of code then you can increase the font size of applications and don't have to worry about names getting cut off
[Code]...
View 4 Replies
View Related
Mar 13, 2010
I need to fix a part of the file and I don't know how to edit it. I'm using the Live CD - I have the install but I need to fix grub.cfg to use it.
View 9 Replies
View Related
May 28, 2010
I had windows 7 installed on my system prior to the installation of Lucid Lynx. The boot loader for windows is installed in /dev/sda1. The main windows installation is in /dev/sda3 Ubuntu is installed in /dev/sda5.
The grub update has added a loader for windows 7 for /dev/sda3 instead of /dev/sda1. How do i change that to /dev/sda1 in grub 2.0 as it says that it is not recommended to edit grub.cfg in grub 2.0. I know i can add something in custom section but I am not a pro in linux hence i'm not sure how to add that
View 6 Replies
View Related
Jul 6, 2010
I had to followed this tutorial on how to Install ubuntu on my Toshiba Satellite M35X-S114. I am stuck on step 2 now. I used one of the options and was able to get Ubuntu Desktop 10.04 onto my laptop. But now on my first restart I have to edit the GRUB menu and change the boot option so I will no longer then the black screen when booting. Only problem is I can't get to the edit GRUB menu. I turn the computer on select Ubuntu to boot. A black screen shows up I hit e to edit then the Ubuntu loading screen comes up (The one that says Ubuntu and has the dots below it) That screen stays up for about a half a second and it goes back to black and hangs there.
View 1 Replies
View Related
Jul 13, 2010
I used Ubuntu a few years back. I simply was not able to make it my main OS since I couldn't get video calling to work reliably enough. Anyways I just installed and noticed my grub menu had many more entries then I have operating systems on my computer. Some reason they came up as duplicates. I have so far gathered they took away my menu.lst, they replaced it with something like etc/general/grub. It appears editing this file doesn't give me the ability to change entries. There are a few I would like to rename, and a few I want to get rid of. There is also some other file that is not supposed to be edited, will I need to edit this or is there another way around it? I found info like this, but it is only adding not removing.
Assuming that you already looked at the grub2 documentation and had trouble figuring out what to do, try this. Use sudo to edit /etc/grub.d/40_custom. It will look like this:
Code:
#!/bin/sh
exec tail -n +3 $0 .....
After making the change, run 'sudo update-grub' to apply the change to your grub config.
TLDR: Grub 2 added extra entries, how do I remove and rename some?
View 5 Replies
View Related
Aug 22, 2010
i have to edit grub etc/default file but when i open it, it is a read only file (i have to put "i915.modeset=1" in it ) i think i need to do it through the terminal
View 4 Replies
View Related
Oct 4, 2010
Since I updated my 10.04 LTS program from 2.6.32-24 to 2.6.32-25, both of these show up at the dual boot start up menu. Back when I had 8.04 LTS, I was able to edit my menu.lst file to delete past versions. How do I remove past versions from the grub.cfg file at present?
View 9 Replies
View Related
Apr 16, 2011
I have GRUB to allow me to boot windows and Ubuntu, i recently noticed that my list of kernels is getting clogged up with all the updates. So i went online to try and find out how to get rid of the unwanted partitions and also how to add new ones - i am going to attempt to hackintosh, and will need to know how to add kernels. What i found out was; the boot menu in GRUB had a file that is supposed to be called 'menu.lst' (Lst not ist), and that all i needed to do was edit this, that it wouldn't delete the kernels, but that i don't need to, i only need to add and remove links to kernels on the GRUB menu. The problem is that after looking, i don't have that menu.lst file, i have a file containing the image files for 'memtest', but not for my GRUB. I am using 10.04, i don't know what version of GRUB im using but i'm using whichever one comes with 10.04. Could someone please point me in the direction of the files i need to edit or what i need to do to add and remove kernels?
View 3 Replies
View Related
Apr 26, 2011
I installed linux yesterday dual boot win7 but the Fn keys and adjusting the brightness wouldnt work so i tried a few workarounds searches in google. however, when i edited one of the grub lines and when i reboot the system, i see the screen messing up and then goes to black (no display at all). how can i fix this one?
View 9 Replies
View Related
Sep 14, 2010
I just installed Debian on the unused part of my HDD. It did not pick up the other OS I have on this PC, but the installer said I could later edit GRUB to make the other OS boot again. I have looked around and done some searches with no luck.
View 14 Replies
View Related
Mar 5, 2010
I'm using HP Pavilion dv2108tx I have ubuntu and Win7 dual boot. The problem is every time I change setting to the BIOS there will be a new list of ubuntu boot came up and now I scroll trough the whole list. Is there anyway to edit GURB boot list.
View 3 Replies
View Related
