I set my swap partition a bit high and now want to shrink it down and possibly merge it with one of my other partitions. I don't have dual boot, just have a second partition on the drive for data. Can I merge these easily?
View 7 Repliesecently I tried to increase the size of my swap partition using GParted, but it wouldn't let me. I wondering if there was another way? Currently it's 795 MB but I want it to be 1GB
View 3 Replies View RelatedCurrently running Slackware64 13.1 on a notebook and for the most part everything works fine. Only problem I am running into is with hibernation, where sometimes it will go into hibernation without a hitch and sometimes it will stall after blanking the screen and never turning off. For the most part pm-suspend.log looks fine every time, whether it goes into hibernation or not. My current system has 12GB of RAM and my swap partition is roughly 12GB. For the most part my RAM usage right before going into hibernation is always under 1.5GB with maybe 600MB floating in the swap partition. Could the size of my swap partition be too small even if RAM usage is nowhere near max?
View 9 Replies View RelatedI am using Kubuntu Amd64 Lucid on my desktop and I have allocated 08.03 GB partition for swap. But today I have noticed that system monitor is showing this as 09.90GB which is incorrect.
I tried deactivating the swap from KDE Partition manager. Even after deactivating swap it still shows the swap as 1.9 GB. So there is clearly 1.9 GB swap added to my system. I am not sure how. Attached screen shot clearly shows the system monitor issue. One possibility is, I have 4 GB (3.7 asper system) RAM comprising two units of 2 GB cards. Is this 1.9 GB read from one of these? I tried to boot the system from Kubuntu AMD64 live CD and then it showed only 8 GB as expected. So not sure whats causing this issue in my installation.
want to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
View 1 Replies View RelatedMy laptop has a 60GB hard drive, which my ex-husband set up with a 20GB partition for Windows XP and a 40GB partition with Suse 11, which suited me fine at the time. However, I'm now finding that I need to install a whole bunch of extra Windows programs relating to my work, and the 20GB partition is no longer sufficient, while I'm hardly using any space at all under Linux.
how I might go about redistributing the space between the two partitions (any other solutions to my lack of space problem also welcome)? Please bear in mind that I'm pretty clueless when it comes to this kind of thing!
Does one need to Check the Swap filesystem, from time to time
View 4 Replies View RelatedHow do you access preferences for changing size of the launcher bar or icon size, etc? I looked through system settings and could not find it.
View 4 Replies View RelatedWhen I setup Intrepid (upgraded to Jaunty now), I chose to create a swap partition. I don't remember the size I specified. Here's what I'm confused about When I do 'cat /proc/meminfo' or 'free' or use the system monitor, it reports my swap size as 1262304 KB (i.e. 1.2GB). But if I do a 'fdisk -l', the partition size is reported as 746991 blocks (of 1024 bytes) and if I use the partition editor it says it's 729.48MB. XP disk mgmt shows it as app. 700MB too
View 9 Replies View RelatedI am very much new user of ubuntu and hardly know anything about linux. What is swap memory? I have dual boot system with windows7 and ubuntu 9.04. My hard disk size is 320GB and RAM is 4GB. Currently swap memory size is 4.3GB. Can I increase swap size? Will it have any advantage? How to do that?
View 2 Replies View RelatedI got back to my laptop after dinner and found a blank screen with one line of text saying something about running out of swap space - I tried all kinds of key combinations but nothing worked to bring the desktop back - eventually I pressed and held the power button to shut it down - I suppose this is Ubuntu's version of the "blue screen of death"?I went to System - Disk Utility to make a 2GB free space right after the swap space. Then I tried to make that 2GB free space a swap space partition but it came back with an error
View 5 Replies View Relateda possibly preposterous question. I am aware that you can designate a swap file or swap partition on your hard drive that linux uses as "memory". Suggested sizes for the swap file that I've seen range up to about 1024MB. Is there a limit to the swap file size that you can set?Basically I am running a perl script that processes a massive B) file (DNA sequence data), etc, and requires around 48 GB of memory to run, maybe a bit less. So, would it be possible to set a swap file to a massive, ridiculous size (~60GB oratever) and successfully run such a script on a desktop?Yes, I am aware that it would massively ow down the process. The thing is, if the perl script normally completes in about half an hour, and I can get it working on a desktop, I don't mind if it takes days or weeks to complete. I really don't. That's because it takes days or weeks to get access to a computer with the required grunt to do it.So, is this a stupid idea? Is it even possible? If so, given a perl script that normally completes in a half hour on a 48G system, if you do this, would it take days? weeks? decades
View 7 Replies View RelatedI recently upgraded my laptop from 10.04, to 10.10. -- And in so doing reinstalled the OS from scratch, and letting the system pick the partition sizes.
Code:
My system:
2GB RAM
160 GB HDD
HP 6910p
Here's the question: The Installer set aside 6GB as Swap space, leaving 154GB as a / partition for everything. I had always thought 2GB was plenty, or as a general rule twice the Physical Memory size, which would only be 4GB swap, not 6.
Can / should I reclaim some of that swap space, if so how much. -- I can using tools like GParted to resize the partitions. -- Or just leave it as is. Unfortunately, the Ubuntu 10.10 installed did not seem to use GParted, so it was a little harder to set up initially.
I had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.
a client brought in an 160GB external HDD and wanted to get the files off it, there appeared to be no partitions on the disk but i thought it may have been formatted to use the whole disk. I tried to mount it as the various FS types the client thought it may have been to no avail.
I ran testdisk on it which told me that it previously had a mac partition table and a 210GB partition on it (which is larger than the disk) could anyone enlighten me as to whether or not this is even possible, and if so how could i retrieve the data?
I am trying to increase my swap size because it seems to be getting full and making my server lock up.
I've tried this: [URL]
But all I get is this:
# lvm lvresize /dev/VolGroup00/LogVol01 -L +8000mb
Extending logical volume LogVol01 to 9.75 GB
Insufficient free space: 250 extents needed, but only 0 available
vgdisplay gives me:
[Code]....
I was reading another thread about someone with a bad partition table and I decided to join this forum. I'm not going to take any drastic actions with the partition (/dev/sda3) in question. I am going to wait for instructions on what to do first. I am not very good with Linux and need some hand holding. System: DELL 4550 Dual-Booted with XP and Ubuntu. Works OK, just no swap. Well, here's what I did: I deleted a partition for Windows XP Pro because it was a trial, and it ran out. I then decided to slide the swap partition for the Ubuntu Linux that I dual-boot into over. (If this was successful, I was going to try expanding the root partition to take up the unused space.) I used Gparted on a CD to do this, as I figured it was safe to do.
I now cannot mount the swap space at bootup (and have to go into a backup version of the OS), although I can use Gparted in Linux to execute the "swapon" command, and it appears that it worked because I now see "swapoff" as an option on the context menu. (I actually don't even need a swap partition, except to hibernate.) If I highlight the swap partition and click on "Drive" on Gparted's menu bar and select "Create Partition Table", it will erase all data on /dev/sda, so how do I fix the bad partition table non-destructively?
Should the swap file be as large as possible or as small as possible providing a person has 8GB of installed ram.
View 14 Replies View RelatedI just installed Lubuntu 10.04 on old PC (CPU: 700 Mhz, RAM: 640 MB). My swap partition is only 474 MB. I was told it should be twice my RAM, if that's true then I'm really low on swap space. Can I expand my swap space? I also have Fedora 13 installed, it has a 1.3 GB swap partition, can I have Lubuntu use this partition?
View 5 Replies View RelatedNeed to increase swap size, currently on LVM2, does we can extended the lvm swap presented or need to create a new one. Which one is recomnded new lvm for swap or extend the lvm already exist ? Below are the swap exists in my server./dev/MU_PROJ/lv_SWAP swap swap pri=42 0 0
View 9 Replies View RelatedI am having issues with Grub 2 after installing Debian 7.8.0.The computer is a HP Pavilion 500-307nb. I made the original harddrive /dev/sdb and inserted a Samsung Evo 840 as /dev/sda. From the original hard drive (/dev/sdb), I wiped the windows partition, but left all other partitions unchanged (in case I would ever want to recover the desktop to its original state). I replaced the wiped windows partition with a swap partition and an LVM partition.These are my hard drive partitions:
/dev/sda (Samsung Evo 840)
Number Start End Size File system Name Flags
1 1049kB 3146kB 2097kB primary bios_grub
2 3146kB 944MB 941MB ext4 boot
3 944MB 94.4GB 93.4GB host lvm
4 94.4GB 1000GB 906GB guests lvm
[code]....
The partition /dev/sda3 has 2 logical volumes with filesystem ext4 that I mount to / and /home.The partition /dev/sda2 is mounted to /boot..When I install like this, Debian installs fine, however Grub2 is not installed correctly.Debian installs grub-pc which seems not able to boot the gpt partition. So I boot the Debian CD in rescue mode and execute:
mount /dev/sda2 /boot
aptitude purge grub-pc
aptitude -y install grub-efi
After rebooting, I come in the grub rescue shell, which says: error: no such device: 986f2176--4a4b-4222-83b9-8636a034b3c7.
When I then enter in the grub rescue shell:
set boot=(hd0,gpt2)
set prefix=(hd0,gpt2)/grub
insmod normal
normal
Grub and Debian start up correctly.why can Grub not start up automatically correctly? Where does the UUID 986f2176--4a4b-4222-83b9-8636a034b3c7 come from? I have reinstalled Grub several times, I have reinstall Debian several times, I have even wiped all partitions from /dev/sda and recreated a new gpt table with parted and manually set the partitions in parted. Still on each reinstallation, Grub fails because it cannot find exactly the same UUID. Since this UUID is always the same, it must be stored somewhere, but it cannot be the partitions, I have wiped them and the partition table several times.
I did though a firmware update of the Samsung Evo 840 before reinstallation, could this be a cause?Also the problem is not in grub.cfg. Grub starts correctly if I enter the commands above in the grub rescue screen and the UUID value does not appear there.
I wonder whether to place swap partition on LVM or on standard fdisk partition which will not be in LVM.What is better and more often used on production ?
View 4 Replies View RelatedI installed Debian 8 Jessie with full disk encryption and chose to have everything on the same partition. After install, I notice that my 8GB laptop has a 16GB swap. Is there a way to reduce the swap to 8GB (or maybe 4) whilst not affecting the encryption?
I have a 1TB HDD so space is not an issue but I dislike such waste. The setup used LVM.
My laptop has 2Gb of ram, 4Gb of swap, 40Gb hdd and an intel pentium 1.40GHz cpu, even when compiling stuff or maxing out everything the 4Gb of swap is never touched, with such a small hdd I'd like to reduce the swap to about 2Gb (just in case) to free up some space, does anyone know what commands/tools are available to accomplish this?
View 3 Replies View RelatedI've recently just installed ubuntu 11.04 but seem to have made a big mistake. During the install process I was asked to specify a location to be used for swap. Not really understanding what this meant I chose another partition on my drive with some free space but also a lot of my data. Needless to say I now cant see that partition. Is there anyway for me to access it? or to at least recover the information I need from there? its about a 200gig partition, and it used to be ntfs.
View 2 Replies View RelatedI know its a long shot, but still...
Is it possible to change size of boot and swap without doing a fresh install?
this is how my volume dist is like - root -30 gb, boot 200 mb, swap 8gb, home - 110 gb
my laptop is an amd turion dual core TL-58, with 2 gb ram and 160 gb hard disk...
and i want to change it to what is generally recommended ie boot to 500mb or 1 gb and swap to 4 gb..
the remaining can be added to home...
Wubi doesn't let me set the swap file size, so on installation it only creates a swap file of a few hundred megabytes. Because of this, i cannot hibernate my netbook (eeePC 1005HA), which has 2 GB of RAM.
Creating a 2 GB swap file alongside of the original one using the tutorial here did work, but hibernate doesn't seem to work with it. For this reason i thought increasing the original swap's size instead of creating more would be a way to solve my problem.
I want to change the swap partition to another partition. Is there a gui that can make this process easier so I don't have to do things like manually editing files?
View 2 Replies View RelatedHow can I change the tab (<tab>) size in Vim editor?
View 2 Replies View RelatedWine is one of the coolest things I've ever seen, but unfortunately it's still not enough to suit my needs as version 1.38 can't install any of the .NET libraries.
I'm trying to boot windows 7 on virtual box, but it seems to demand quite a bit of memory. The "recommended" amount is 512MB, and upon checking my kernel only has 488MB total ram with not much room to spare:
Code:
billy@billy-desktop:~$ free -m
total used free shared buffers cached
Mem: 488 462 25 0 53 193
-/+ buffers/cache: 216 271
Swap: 1939 17 1921
I've tried giving the virtual machine memory sizes in the area of 192-256MB, but that's way too much and the system locks up and aborts from it. Memory sizes in the area of 128MB is just too small and it throws an error that there just isn't enough ram to boot. So the only thing I can do to make this work is to increase the size of the ramdisk for my host OS so I can give more to the virtual machine (not to mention things like flash animations are horribly slow and I'd like to see them get more fluid).
I see that I have 16 ramdisks available to me:
Code:
billy@billy-desktop:~$ ls -l /dev/ram*
brw-rw---- 1 root disk 1, 0 2010-02-17 09:54 /dev/ram0
brw-rw---- 1 root disk 1, 1 2010-02-17 09:54 /dev/ram1
brw-rw---- 1 root disk 1, 10 2010-02-17 09:54 /dev/ram10
[Code]....
I looked at some guides here and there, but apparently my setup isn't quite the same. I don't have a menu.lst file in boot/grub, and I don't have a grub.conf file anywhere. So I don't know what file I'm supposed to edit for this.