I get the following output from df.
Code:
Which confuses me. I do not know what is going on.
There seems to be a lot of duplication and I am confused about this.
The contents of /etc/fstab is:
Code:
Using a default terminal and bash, there is no functionality to search the standard output of commands.
One can gain such functionality using other tools, like emacs shell or screen, but I am wondering why such a useful feature is missing, I do remember a simple C-F used to work in terminals.
Is there a way to make the Gnome terminal app support output search? or is there a better terminal app that support searching output natively?
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
Seeing this on two systems that went through F13-F14 upgrade.
version: gnome-applets-2.32.0-1.fc14.x86_64
symptom: via right click on a gnome panel, perform "add to panel" and choose Dwell Click.
Gnome panel bites the dust with SIGSEGV at this point, restarts, and then you've got dwell click on the panel.
Anyone else seeing this, and better yet, have a solution?
after i change font at gnome tweak tool , gnome tweak tool error ,i cant change again font because gnome tweak tool crash
What can i do for change font manual?
screenshoot:[url]
view my toolbar font :
is there some wiki page on GNOME or Fedora that list which graphics cards work without problems on Fedora 15 with GNOME Shell? I have tried 3 older cards and they all failed, so I would like to share this info with others so people know which cards to avoid if they want to use full features of GNOME 3 via GNOME Shell.
View 1 Replies View RelatedI see the gnome 3 was release,It need to burn a CD‚But I want to update Gnome 3 from Gnome 2.32 in my system.
View 2 Replies View RelatedI am coming from about 3 months of Ubuntu/Kubuntu and have learned quite a lot from it and am looking into other linux distros, now I haven't installed Fedora yet, but I have a few questions about it, I have a acer aspire one netbook, how well does Fedora support netbooks (e.g small screens)?
I have a verizon usb760 internet modem (I'm pretty sure it's 3G), will it work "out of the box" with Fedora Graphically wise, what are the differences between gnome/kde in Fedora, than in gnome/kde in Ubuntu? How stable is Fedora 14? I have a 8gb flash drive that I want to put Fedora on to install it rather than a cd, will that work? And the last, does Fedora have a live cd feature like Ubuntu so I can try it before I install?
OR IS IT A FEATURE?
I've managed to ALT-RIGHT-click-add some launchers to the top gnome-panel. When i now click on a launcher the gnome-panel crashes(?) and reappeares, but the program starts without problems. If i do this two times in a row (1 sec diff or so) the gnome-crash screen appears and i've got to log out although all the programs are still running without any problems.
dmesg shows this: [14460.034820] gnome-panel[4428]: segfault at 18 ip 0000003810fc05df sp 00007fffcaae4c30 error 4 in libgtk-3.so.0.0.10[3810e00000+3fb000]
I cant seem to get the sound working and when I click on perference then sounds and go to the output selection it has only dummy output as a option.
View 3 Replies View RelatedI installed KMplayer but I cant play video files...No video output but can get only the audio output...So how to make this work for videos?
View 2 Replies View RelatedRunning 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
How to make internet sharing in Fedora with two inputs & one output.
View 14 Replies View RelatedI booted my Fedora 13 live CD on my Dell server, and configured networking and SSHd. On my desktop I logged into the live cd and started copying over a big file (1.5 GB) (i.e. copying from the desktop computer to the server). After copying about half the fil, the download fails with an error message about the filesystem being read-only.I've seen this exact same behavior on both i386 and x86_64 of the same live CD, but don't know why it's happening. I've also had the same issue when copying small files. In /var/log/messages these messages are repeated many times:
Code:
Dec 20 12:32:23 localhost kernel: Buffer I/O error on device dm-0, logical block 684075
Dec 20 12:32:23 localhost kernel: lost page write due to I/O error on dm-0
[code]....
I am sure that this is very simple but I have installed sound juicer and the gstreamer plug ins. The problem is i still cannot select MP3 as an output output option
View 3 Replies View RelatedI don't know anything about ubuntu. Could you guys help me out. I'm pretty knowledgeable with windows if you guys need a printout of something let me know. My friends getting really frustrated about this. Help!!i
So here's the situation. He plugs his audio jack into his computer and then into the speakers but it still plays from the computer speakers.
I finally got audio working on my ubuntu 9.10 desktop... now I am having sound issues watching movies from a network share.The sound device continually randomly changes to "dummy output device" and then there is no sound output. The sound icon dissapears on the toolbar. To get it back and audio to start working I have to $sudo alsa force-reloadIt seems to happen everytime there is a network delay, the movie will stop for a second and then when it plays the sound is gone
View 1 Replies View RelatedIs possible to have two identical sound card outputs? For example, is I want to use two headphones at the same time.
View 6 Replies View RelatedI noticed that in Fedora 15 Beta when you choose a minimal install then add ONLY the defaults of the "GNOME Desktop" package, you will get this error: gnome-desktop3-3.0.1-2.fc15.x86_64 has a required package:
system-backgrounds-gnome
When I look for gnome-desktop3-3.0.1-2.fc15.x86_64 it is not on any installation menu list. I prefer gnome, but installed KDE and that worked. Any ideas of getting gnome to work?
I'm trying to format the output of ls -l, any help is appreciated
Quote:
[david@barca boot]$ ls
efi
grub
david@barca boot]$ cd efi/
[david@barca efi]# ls
EFI
[david@barca efi]# cd ../grub
[david@barca grub]# ls
device.map
now to long list files in each directory using one line:
Quote:
[david@barca boot]$ ls -l *
efi:
total 2
drwxr-xr-x. 3 root root 1024 May 13 2010 EFI
grub:
total 319
-rw-r--r--. 1 root root 70 Oct 26 17:12 device.map
How can I format the output of ls to get it all in single lines:
Quote:
drwxr-xr-x. 3 root root 1024 May 13 2010 efi/EFI
-rw-r--r--. 1 root root 70 Oct 26 17:12 grub/device.map
Any thoughts?
I'm trying to format the output of ls -l code...
View 2 Replies View Relatedwhen I run netstat -s I get a whole listing of different statistics on udp/tcp. what I would like is to be able to understand those terms e.g. TCPLossFailures and link them with the appropriate TCP/IP terminology. There must be some refernce guide somewhere that shows what these fields mean or what they are tracking.
View 2 Replies View RelatedI have now blown Windows XP away completely and done a clean install into 80Gb hard disk (x86). I know that httpd is running and I've added the snippets to httpd.conf that output server status and server info to the web browser, so I can see that all the required PHP stuff is loaded. So something like http://localhost/server-info works fine but something like http://localhost/helloworld.htm produces the wrong output:
contents of helloworld.htm:
<?php>
print("hello world");
print(phpinfo());
<?>
[Code]....
I've just upgraded from fc9 to fc13 on an Acer Veriton L460. Under fc9, I connected the monitor via the digital interface (allowing the analog monitor input to be connected to a "headless" old fc5 box I can't quite retire yet).
When booting the fc13 distro DVD, the display when black shortly after the boot started. Changing to the analog o/p of the PC restored the display allowing fc13 to be installed (obviously replacing fc9). Sadly, booting the new install is the same: no DVI output; I have to use analog.
[Code]...
I'm not sure where to have posted this but I can't seem to get sound.
After typing ' lspci ' I got the following code...
I'm using a LCD monitor through the HDMI port, and I have no sound, nor through the audio port. (Both of).
Also, I have tried Alsamixer but nothing is on mute and I turned them up to the fullest. Here's a screen-shot of what HDMI gives me in alsamixer:
Seems HDMI won't allow me to go over 00 volume?
What am I doing wrong, or have not done?
I am trying to run a java .class file by double-clicking it. So far my attempts at running it have been successful, but I don't' know how to keep the display open to see what the output is.
View 6 Replies View Relatedfirst of all, during last few days I've visited this forum and asked for help, all in trying to fix the problem which I had. I failed to do so, and I am really frustrated now, as it is off very big importance.I'm huge fan of linux and fedora, so it kills me to have to boot to windows to do simple thing.
Problem: I bought DELL Vostro 3300. When I try to connect it through VGA(only output it has) to my monitor (tried different monitors, same effect), my screen wobbles. The higher the resolution -> higher the wobbling is. It is almost impossible to read text due to this. I attached extension which I recorded the wobbling (mp4 extension). Wobbling is even during linux startup, before xorg is loaded.
On lowest resolution wobbling is very little. It's same on different frequncies. I've tried different kernels but with no success.
What's important, it's not faulty hardware, since it works fine on Windows.
The problem has same characteristic as one mentioned here in buglist. In new kernel it's supposed to be fixed as I understand(?) but it's not for me.
I have a problem with the audio output in Fedora 15. It seems 'dirty' to me, like with a lot of distortion. I use for the output a nice USB DAC that seems to run very good with Ubuntu and Windows, strangely with Fedora isn't the same. I say strangely because the sound pipeline must be very similar to that of Ubuntu, no? Kernel, ALSA, Pulseaudio and so on. How could I improve mine audio output? Tried with Flash videos and Audacious audio player. Lowering audio output (like to 50%) greatly improve audio quality! Why is permitted to the system to go over and distort?
View 5 Replies View RelatedI've been searching the forums for a while and can find similar issues, but not the exact issue. So here it is: I recently downloaded the Fedora 11 x86_64 full install DVD iso and burned it to a DVD. It booted up fine and went to the "splash screen" (where you select options) with no problems. I first selected "upgrade or install." There was some text on the screen before the screen lost output ("no signal" displayed on my monitor.) I let it sit like this for about ten minutes hoping it would work to no avail. Next I selected "upgrade or install with default video driver" this time I got to the "check media" screen, checked with no problems, said continue, it said it was loading anaconda...then...boom, same problem
View 2 Replies View RelatedI have a bug where WoW under wine is crashing my computer, and I want to get the data from the console, so I want to put it in a file, but I don't know how! None of the piping tutorials online helped at all.
View 2 Replies View Related