Why htop's bars have different colors? Still can't find an answer... And it's bars don't really correspond to the numbers. Even if CPU is loaded 60%, the bar can be loaded almost 100%.
View 3 RepliesHow do I change the ugly default orange color for the loading bars and stuff? I know how to change things with the window manager, but that only changes the frames and "min, max, close" buttons. I like everything about the theme I have, and the way the window manager is set, except it uses that ugly orange color when things are loading or downloading. How do I change that part? Can I change only that part by itself?
View 2 Replies View RelatedI want to install Gnome Color Chooser so I can edit the task bars text colors and what not. I have Compiz Fusion and Screenlets ready to go as well as my NVIDIA driver installed.
I cant find the latest version pre-packaged as a .rpm. How do I install it from a .tar.gz?
The home page is: [url]
This might be nothing but when booting a computer directly into the console (tty), and running htop, I expect the list of running processes to be very short, but it turns out I have more than 50 instances of /usr/sbin/console-kit-daemon --no-daemon running (see screenshot below). Is this normal?
View 2 Replies View RelatedSo far I want to change two things i want to change both the bars to Black and i want the text to be white i tried google nothing...
View 4 Replies View RelatedI am talking about this :-
Code: Select all[$] sudo cp debian-8.1.0-amd64-netinst.iso /dev/sdb
This is from [URL] ....
I could do two things :-
a. Do a pv and see if that works the same ?
b. Do an alias for pv which is cp
PV seems wrong when trying to copy an .iso image for booting.
Spice server/client configuration. I used remote viewer on debian jessie to connect to a guest virtual machine on kvm and everything works fine. It used a spice server / client and qxl. After I upgraded to debian stretch, I suddenly face issues with black bars in the remote client window. Those black bars appear only on the left and right side of the remote viewer window. Also in full screen mode the black bars sadly appear. Maybe the scaling mode is somehow disabled or my screen resolution of the host was wrong calculated related to that i can change the guest screen resolution but the spice remote client keeps its window size with the black bars. I was trying the last couple of days to resolve this issue, unfortunately without success.
View 10 Replies View RelatedI just recently installed Lenny 5.04 on my computer and when it comes to the desktop the top and bottom bars seem to be set for a lower resolution. They only go about a third of the way across the screen and if set to be at the bottom the bottom bar is only a third of the way down the screen. The logon window fits this format but most other things go full screen (games don't though).
What is it I need to change and as an aside how do I change the screen resolution if I want everything bigger (so I can read it with my old eyes)
I decided to install Debian on my Power Mac G4 (Digital Audio). Everything worked, but the default GeForce 2 only worked at 1024x768 at few colors. Is there any way to fix this?
View 1 Replies View RelatedI have sucessfully installed Debian 8 stable onto a powermac G5 with and Nvidia FX5200 graphics card, and got the graphics up and running using the nouveau.modeset=0 kernel parameter. However, now the screen is showing completely messed up graphics. The kernel parameters that I have set are: nouveau.modeset=0 and video=TV-1:d.
I've now tried other Desktop environments and they too are messed up. Even window maker is messed up.
I've been having trouble with rendering issues in Gnome for the past few weeks, running Sid on x86_64, Occasionally Blue and Grey horizontal bars show up, they go away partially if I scroll up or down, and the bars disappear completely if the window is resized. Select characters/letters will also occasionally become garbled, if I change the font in Gnome Tweak Tool it seems to temporarily fix the issue though.
View 5 Replies View RelatedI installed compiz with nvidia trouble is when I run compiz white bars or lines (bars) appear in open windows (icewease, gedit, etc.). They disappear after a few moment and reappear when scrolling a page. BTW everything works fine with metacity running as window manager.
Here is my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (randy@juliet2) Fri Sep 5 15:03:39 PDT 2008
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (randy@juliet2) Tue Jun 24 10:44:02 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
I have the nvidia driver 173.14.09 installed. Running Debian Lenny stable x64 and turion x2 with a geforce 8200M G graphics card with dual screens. I first installed the debian repos compiz, then upgraded to the tuxfamily repo version. I installed the nvidia driver 190 from nvidia's website and that fixed it!
After I've installed nvidia-vdpau-driver 280.13-1 from debian testing repositories, all the colors on the screen became too bright, except dark colors.
I've tried to change the values from Brightness, Contrast and Gamma, in NVIDIA X Server Settings -> X Server Color Correction, but it doesn't bring everything back to normal.
Either the nvidia driver has problems, or I don't know how to calibrate. But before I installed nvidia-vdpau-driver, I had the nouveau display driver (experimental), and all colors were displayed normally, the same as in Windows 7 and XP.
I was installing some packages yesterday, I think one of them was an update for grub. (I'm using grub 2). When I rebooted, the console text was in green, not the usual white. (using gfxpayload=800x600 i.e. console is in graphics mode). I first thought maybe it was some kind of St. Patrick's day joke, but now I am getting tired of it. How do I set the color scheme back to normal?
View 7 Replies View RelatedI have some problem with dzen2 & conky to show icons and/or colors.In my i3-wm config file i have:exec conky -b -c ~/.conkyrc | i3-wsbar --command "dzen2 -dock -x %x -l"and my conky is correctly displayed on i3-wsbar.But if in my conky I put something like:
^fg(#B64403) mem: $memperc%
or
^fg(red) mem: $memperc%
[code]....
I have a xterm which can have 256 colors. How can I configure the prompt colors and ls output colors to take advantages of the 256 color values?
View 4 Replies View RelatedIs it possible to have htop run automatically after I login? If it's too much to ask, it would be great if that specific htop window is locked on the upper right corner of my screen and is a bit transparent (more opacity).
I'm looking for something similar to this one: [URL]
How can you make htop sort the list of processes by PID?
View 2 Replies View Relatedresult of a command in the terminal. Tried using command > resultfilebut this works with commands like ls which provide a result line by line. But for commands like top, htop and some other the text file adds some string of characters.Example of running htop > test.txt is shown in the attached image. Anybody know how I can remove those characters and get something useful.The problems are those strings of character liek (B and [39m and so on.Also if i open the file on cat if displays fine(well it closes as soon as it opens but i can just see its ok) but on vim and gedit i get the result shown in the image.
View 1 Replies View RelatedWhen I run Htop on my Ubuntu 10.04 machine, the "Mem" line reads 239/992MB.
However, when I run 'top' I get:
Also, when I run 'free', I get:
It seems like Htop tells me I have more than 700MB free, but 'top' and 'free' tell me that I only have about 270MB free.
Can anyone explain to me why there are sometimes 10 or 15 processes with the same title and "stats" listed in htop? I'm guessing there are multiple threads running - but that many of them obviously couldn't be running concurrently.
Is there any sort of performance hit taken if a process uses say, 15 non-concurrent threads vs. 10 non-concurrent threads?
I love using htop, but I have noticed that whenever I sort by a parameter (for example, Shift+m for sorting by Memory usage), the htop stats stop dynamically refreshing. Is this intended? I also notice this with top as well.
View 1 Replies View RelatedRunning 9.04 Xubuntu desktop as server and development environment. I turn off gdm once booted up. When sshing in for other computer I ran htop, and found the following multiple processes:
[Code]....
Is there any good reason why I have multiples of these, or conversely is there a problem by having them? Everything works OK. Apache is only serving up my web development pages which I work on now and then, so its not having to handle external traffic. The server is port forwarded on port 80 through the router.
I just built a server, which displays 8 cores in the i7 processor. However, because of the 2 threads per core, it shows up as an 8 core system. When viewing htop, it shows system loads at 0.29,0.18, and 0.13 for respective averaging times. How would I calculate actual system load for this processor? Would I divide the average by 4 or 8? Or, is there another method?
View 7 Replies View Relatedhtop is my preferred system monitor, but I have a problem with it in Unity: When I open htop from the Applications lens there's no entry in the launcher added for it. This means I can't add it permanently to the launcher. It may have to do with it being a terminal based program, but I was wondering if there is a way to get it permanently added to the launcher?
View 3 Replies View RelatedI'm trying to meter my memory usage. When I use these different programs, they all show me using different amounts of RAM.
View 2 Replies View RelatedJust trying to figure out some stuff with a broken process. A java app seems to sometime get stuck on a loop or something and i'm trying to find out what's causing it using just the following #sysadmin tools at my disposal.
Things like:- htop - find the PID thats causing the High CPU cycles. I'd then want to use /proc/[PID] or lsof -p [PID] or strace [PID] etc. But the PID doesn't exist in 'ps -ef' output so I think htop must be showing me kernel level thread PIDs?
Not sure about the PID's HTOP is actually giving me? I know that some of them are the real PID's that can be accessed through /proc/[pid] etc but others are not but are i assume child processes or more likely threads as child processes are normally shown in a default ps output anyway.
Is someone able to help distinguish to me about what exactly all these other PID's are that I can't manipulate or find apart from when using HTOP.
Actually I suppose to use this "htop" command to get the system utilities like current processor speed ,running programs ,memory usage(ram and swap) to my program. I planned to get it using popen(). I was success popen("top | grep Mem", "r") with top command. But are there a way to take such information using "htop". Or are there any idea of taking current CPU,MEM,Swp usage as well as Tasks and running tasks using htop or other way to C program...
View 1 Replies View RelatedI like to keep top/htop running rkhunter showed up randomly. I didn't launch this. f11, 2 day old install, fully updated.
View 2 Replies View RelatedIs it possible to have htop display a graph in the panel same as System monitor does?
View 4 Replies View Related