I tried to install Debian on my MyBook Live NAS following this [URL] ..... I was as happy as a sandboy when the SSH login finally was reachable after the process which went through without any errors or problems. But thats not the end - my password is not accepted and so i can't login.
In more technical terms here's my question: I chrooted into a newly debootstrapped system and changed the password using simple 'passwd'. Having done that on another machine i could find out that there are no locales/keyboard settings applied. My guess is that in this case the default US(?) settings and the keyboard layout are used.
Not aware of any issue here i entered a password containing special characters like " and ! and @. After investigating further I found out that in the chroot environment my keyboard layout from the host is used, which is bad because i do not know what environment was set in the originally MyBook system. All the action was done via SSH using kitty.
Disassembly would be the last exit which i would like to avoid. What keyboard layouts are used in chroot without locales set AND which one is used in the openssh login prompt? Is there a way to enter the password in a <ALT> + x format?
I'm rly poundering on the following problem. For our school assignment we need to make a liveCD (just a part of the assignment). I've stripped down a default ubuntu 9.10 . But I need to default keyboard layout to be azerty (belgium). When I run the liveCD in virtualbox and do dpkg -reconfigure console-setup it's all good.
But when I do it in chroot to change the liveCD, it gives an OK etc but when I pack it into an ISO again and run it ... Again US keyboard layout. Even on startup when I change the keymap it doesn't change to azerty... I rly don't know what to try now..
Running Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
I have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (ᠩ ? hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
having problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
when I finally wanted to install Debian to my hardrive. Somehow, how to copy it to USB drive and make it boot-able. Installation process started without problems, but it failed on step called (something like) "Find files in CD-ROM" - what was expectable, since I used USB drive. So I wanted to unmount "/cdrom" and mount my USB drive there instead. I moved to another terminal, and searched for right device. "ls /dev" does not help, since I can't scroll to see other devices. Also kernel messages - can't scroll. Tried to change keyboard layout, still didn't work. I also can't use less, because there is no apt-get installed. Another problem is, that after trying to mount only viewable device (/dev/sda1), mount failed bacause I gave there invalid argument, or directory didn't exist. (Note that I created directory in /mnt/... or /media/... first). So I am asking - how can I remap keyboard to use those page up/down keys?
I have console only on my machine and I have two problems with it:
1) I can't find how to enable programmer dvorak keyboard layout.
2) All the console settings don't stay after reboot, I have to do dpkg-reconfigure console-setup again. But after I do that I loose russian layout that I normally can switch to with Alt+Shift.
I was using a custom layout for my keyboard as I've a UK laptop but still use french accents sometimes. After the update from Wheezy to Jessie my configs disappeared so I have put them back:
- Defining my layout here: /usr/share/X11/xkb/symbols/gb - Adding here: /usr/share/X11/xkb/rules/base.xml and here /usr/share/X11/xkb/rules/evdev.xml in the gb configItem
Code: Select all <variant> <configItem> <name>accentsFR</name> <description>English (UK with french accents)</description> </configItem> </variant>
- Adding the declaration of the layout here /usr/share/X11/xkb/rules/base.lst and here /usr/share/X11/xkb/rules/evdev.lst
Code: Select all accentsFR gb: English (UK with french accents)
So everything looks alright, if I go to System Tools -> Preferences -> Settings -> Keyboard -> Input Source my layout is well selected and I can even see the correct layout by clicking on the keyboard icon (cf my snapshot)
Here is the snapshot of the keyboard input source settings: [URL]....
When I installed Debuntu i picked US as my country, and now when i try to change region/language/keyboard-layout to norwegian, Debuntu only suggests english. How can i install the Norwegian language pack to debuntu?
I know there are many threads regarding this topic.I probably read most of them. At installation time I told Debian to use German keyboard layout (since I am from Germany). Now I want to switch it to American keyboard layout. In X this was no problem. But in the tty consoles I cant get it changed. It does not matter to me if it is system wide or user wide because I am the only user. (system wide would be a little bit more preferrable because it would affect the super user too, I think).I tried dpkg-reconfigure console-data and selecting my desired layout. This changes the Layout to American until reboot
I've Lenny and I've created a customized LIVE USB image with Swiss German keyboard layout using these commands:# lh config -b usb-hdd --bootappend-live "locales=de_CH.UTF-8 keyboard-layouts=ch" --packages-list xfce
# lh_build An binary.img was successfully created, but if I boot from this image, then I still have default US keyboard under xfce.
I just installed Debian 6 and need to change the console keyboard layout (I am not running any sort of gui).I installed 'console-data' and ran:# dpkg-reconfigure console-dataThis assigns my Apple keyboard keys perfectly but it won't survive a reboot, which is really important for entering passwords
What is the general way to switch the keyboard layout? What works for me currently is the custom Section in /etc/X11/xorg.conf.d/kbd.conf. However this section must include Option "Device" "/dev/input/by-path/..." which identifies the current keyboard. This works fine for my laptop keyboard. However when I attach USB keyboard, keyboard switching does not work. I also found somewhere it should be done via /etc/default/keyboard, but that does not work for me at all.
I'm getting a weird charset problem in a chroot'ed system that I kexec'ed into. It is especially noticeable in ncurses programs like aptitude, but it also noticeable in vim. [URL] My locales are configured to en_US.UTF-8, I have choosen my keyboard layout with kbd-config while in the chroot before kexec'ing into it, I've passed the bootkbd= parameter to the kexec'ed kernel, and my TERM variable is set to "linux". I can't try xterm because this chroot system doesn't has X.
EDIT: I just noticed that the keyboard layout I selected is not working properly. All keys work fine except the ones that are specific to my country. Instead of ç I get a weird symbol.
i've just built my own debian distro with simple-cdd, based on the latest release of lenny. everything is working fine, except for:
first, i couldn't set a default keyboard layout up in preseed file. i tried all these settings below, but none of them worked: console-data console-data/keymap/qwerty/layout select US american console-data console-data/keymap/family select qwerty console-common console-data/keymap/family select qwerty
I use czech QWERTZ keyboard layout, but sometimes it accidentaly switches to (probably) english or US qwerty, so I am unable to write our national characters (which share the keys with numbers on laptop), it writes Y instead of Z etc.
So I am unable to write normal text. I looked in keyboard settings, but it seems to be ok:
layout is "česko with <|> key" - HP Pavilion ZT11xx - this seems to be OK and it worked without problems before this accidental switch.
there is no other layout than the mentioned one and in Layout settings (hope this is correct as I have this in Czech) I unchecked all boxes in Layout switching.
I absolutely have no idea where is the problem. Maybe it is some keybinding but did not find anything which could do this.
I use Debian Lenny with added a11y apps like Orca etc. called Vinux. I tried to ask there, but currently wihout success.
how can I set the keyboard layout used by Debian to enter the password of my encrypted filesystem?
After my recent "aptitude upgrade", I have not been able to mount my encrypted filesystem anymore. I have discovered that the keyboard layout used to enter the password has changed. Problem is that with such layout I can't enter some of the characters composing the password. The encrypted filesystem looks intact, since I have been able to mount it and backup my files by means of a live CD. That means that I can edit any system file, if needed.
Every technique I have found to change layout cannot be employed in this case, since they rely on the system being up and running. I've tried editing /etc/default/keyboard, but that does not work.
I installed Gnome 3 Classic but I can't change my input source.in Gnome 3 I can but in Classic version I can't. In Gnome 3 I can see it beside the Clock but In Gnome 3 Classic it doesn't exist. How can I enable it?
I'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
Recently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
I keep using the rescue cd because whenever I choose a keyboard layout the system does not seem to keep it like that.
After rebooting it loads another layout and I can't find which keys to type in that unknown layout. So for the moment, my password is 'tt' because I know it will work in both layout.
I have a belgium azerty keyboard. For the moment the upper option in the keyboard layout screen is USA and the lower option is Belgium. Which is weird since I thought that the upper option was of higher priority. But at least it works like that. At least until I reboot I think
PS: the rescue cd has also a keyboard layout problem. I chose belgium and I end up with a usa layout.
I use 2 keyboard layouts. But when I change setting from the YaST interface in KDE, setting save only for the short time (may be some hours). Then I can't switch between layouts and have to use YaST again. What is it?
I recently got a new keyboard, and went with a Razer RZ03-0018. It's not working. I have Swedish as my default language, but it defaults to... enUS I believe. In System > Preferences > Keyboard > Layouts, I can't find the keyboard listed anywhere, and even though I have it set to "Swedish", I still get that weird enUS layout
I'd like to change around my keyboard layout a bit and can't figure out how. I'd really like to swap f1 and f7, f11 and f2, right alt and escape, backspace and caps lock, and a few of the letter keys. Is there any easy way to do this? (It's a confusing story about why I want to swap the f keys) Gnome, if it matters.
my keyboard layout keep changing from windows to windows. When I am using my French keyboard, I set the keyboard to English and it doesn't make the change for all the open windows, despite having selected the "separate layout for each windows" unselected.Plus if I am in firefox with a French layout go to another windows and come back to the firefox windows, the layout is back to GBR.
I've got an odd problem with the keyboard layout options.
I use caps as an additional control, as set in Keyboard Preferences > Layout > Options. However, I recently came across an issue where Shift + Space does not send space, so I go into the options to set space at any level to fix it, and while the option appears to have been selected, there is no change in behavior.
