Debian :: What New Filesystem In Squeeze?
Aug 10, 2010Squeeeze is now frozen.Lenny has Ext3 as default filesystem and that's fine.But I am unsure if the Ext4 or btrfs is the best - and why.What's the best? Ext4 or btrfs?
View 2 RepliesSqueeeze is now frozen.Lenny has Ext3 as default filesystem and that's fine.But I am unsure if the Ext4 or btrfs is the best - and why.What's the best? Ext4 or btrfs?
View 2 RepliesI'm wondering if anyone knows what will be Squeeze's default filesystem. Will it be the proven ext3 or the newer (sometimes faster, sometimes slower) ext4?
I currently have ext4 and I have nothing to complain about. In fact, my overall experience has been very positive. Ext4 is definitely faster when fsck runs during boot.
What would be the cons of having ext4 as default in Squeeze?
as far as i know Debian "Squeeze" has a disk check utility, but you can't run this on a mounted filesystem. Is there a way to trigger this during boot (before filesystem is mounted) ? I can run this once a month to keep filesystem healthy....
View 2 Replies View RelatedI am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies View RelatedI am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View RelatedBelow is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
I've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?
View 12 Replies View RelatedI installed Debian Squeeze with Gnome today. I'm unable to change from the default icon theme. I can change themes, but the icon theme remains default.Things I've tried:
- I've made a new user account.
- .gtkrc-2.0 in my home is auto-generated, .gtkrc.mine does not exist.
# -- THEME AUTO-WRITTEN DO NOT EDIT include "/usr/share/themes/Darklooks/gtk-2.0/gtkrc" include "/home/haunted/.gtkrc.mine"
# -- THEME AUTO-WRITTEN DO NOT EDIT
- I've tried installing a theme into my /home/.themes.
- I've reinstalled gnome-settings-daemon.
- Tried changing themes then doing a full reboot.
- Cursed it periodically.
I want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View RelatedI have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort.
2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install.
3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files.
4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedI just a newbie.i want to try customize my desktop.i found a website shown linux desktop very greatfull, like this :but i don't know how to start it.any expert guys please let me know the guiding for me to start this.
View 1 Replies View RelatedFound this 'Startup Disk Creator' in Ubuntu,it is useful,how we get it install in Debian Squeeze? There's a Unetbootin for Debian,but it pull in lots of qt stuff,I don't like it.
View 2 Replies View RelatedI have installed Debian Squeeze 6.0.2.1 amd64 from DVD-1.iso (4.4 GB) and I cannot install Synaptic Package Manager or Wine because they are not in the repos.
[Code]...
Fresh install of Debian 6.0 (squeeze) and the memory shows 3.8 GB. I have 6 sticks of 2 gb on the board.
Pertinent dmesg lines: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
3083MB HIGHMEM available.
883MB LOWMEM available.
Bios tests 12 gb of ram fine.
After dist-upgrade a few days ago, X refuses to kick in.
Xorg.0.log reads
Code:
Fatal server error:
no screens found
Please consult the The X.Org Foundation support at http://wiki.x.org
Please also check the log file at "/var/log/Xorg.0.log" for additional information. lshw reads that Xpress 200M is claimed by radeonfb driver.
At this moment, no fglrx packages are installed.
System is Toshiba laptop.
I do not think ATI dropped support, however, even without fglrx, nothing works.
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
Will Debian 6 stable have ext4 filesystem?
View 10 Replies View RelatedThis topic began in the Debian Development forum here I have successfully completed both the install and the after installation configuration. I have a fully functional system on this little baby, inspite of the fact that wireless (Broadcom bcm4312), ethernet (Realtek) and sound were initially broken.
There is a lot of assistance out there on the web. In the previous thread, I was having trouble installing any debian on a usb stick. The issues that needed resolving were 1. Bad stick
2. Incompatible kernels between boot.img and .iso
3. The method of copying .iso to the stick that finally worked was wget My first successful usb install was Lenny. Even though I upgraded the stock system with lenny-backports, I could not get wireless, ethernet or sound working the only connection I could get to the internet was through my 3g stick and that was not performing up to it's capability. I manually configured wvdial to get that working.
I attempted an upgrade to squeeze several times and each time the upgrade trashed the system. I finally found squeeze boot.img and .iso files from an eee pc blog. This allowed a fresh install of Squeeze and I was making progress. The little atom processor would not handle the b43-fwcutter driver, so I compiled one from the Broadcom site written especially for the atom processor. Now I had cable broadband supplied wireless. I got my ethernet working with help from the Gnome site technical specs on Network Manager. Simply changing ifupdown=false to ifupdown=true in the network manager config file.
Sound was activated by help from a blog entitled "Debian on the Dell Mini 9" My head is spinning now or I would be more specific and instructive on all I did to get this baby up and running. If anyone asks, I may do a how-to.
PS: Posted from that Dell Mini 9 running Debian Squeeze.
EDITED: Correction of typing errors.
Debian Lenny worked just great. That was my first experience of Debian. The installer recognised all my hardware and the system was soon up and running brilliantly with a few tweaks. Confident of Debian's reliability, I decided to move to Debian 6 and did a fresh install, with downloads of the new operating system rather than a distribution upgrade. The installation routines have not worked for the same computer system. I don't know if its hardware not being recognised by Debian 6 that were recognised without a problem by Debian 5??
At first, the boot-up flipped at "Waiting for /dev to be fully populated," there was a kernal panic then Debian disappeared. No signal was sent to the monitor and I had to switch off the computer manually
I was able to look into the Debian 6 OS from Arch Linux, installed on different partitions of the same hard-drive. I am able to overwrite the Debian files as root from Arch.
My i686 machine has PATA IDE drives.
Why are 2) dbus and the 3) avahi-demon failing? I need to get them started first so that I can get an internet connection and try and correct the problem with X and the wrong Nvidia driver. Is there some configuration I can do either from Arch, where I am now, or the bash prompt on Debian? Thanks in advance.
I want to install VGA driver on debian squeeze. my VGA is "Intel Corporation 82G33/G31 Express Integrated Graphics Controller".I do not know which driver I must install for this VGA.Does Linux recognize related driver ?
View 3 Replies View RelatedWhen I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
Once in kde, after an undefined time (can be minutes or hours), mouse cursor start to have a fixed shape (if i am in iceweasel on a link, the mouse can get locked with the hand shape). In this state, the mouse cursor can still be moved, but no program can be launched or closed (X) in kde. I still can launch a new console now (ctrl+atl+F2), "ps" don't show any process consuming cpu (all processes are near 0). "sensors" shows 55*C. Other commands as "kill" going to lock, they don't work and at the same time they don't return the cursor to the shell.
View 14 Replies View RelatedOn my squeeze OS I have texlive-latex3 installed and I wanted to install revtex package of the American Physical Society. While trying to install I was prompted to run #unzip revtex4-1-tds.zip -d /usr/local/texlive/texmf-local/ However my machine does not have /usr/local/texlive/texmf-local/ Instead it has /usr/local/share/texmf/ Will it be all right if I insert this location after -d ?
View 1 Replies View Relatedi screwed up a good debian install with wine. before i do it again i want to know what the best way to get and install wine . AMD 64, toshiba L645D laptop with 3G ram. ATI radon openGL . I read several pages and seems they suggest to compile from source (which i can do i think). others say to use aptitude .
View 7 Replies View RelatedI am running Debian Squeeze, apt-get update runs by itself in the background, taking up 100% of one of the two processor cores.
I have kept the system updated.
Heres the output of
Code:
Code:
I have noticed this a couple of times now, i can kill the process and it doesn't show up again ( i haven't noticed it showing up till next reboot).
I don't have update manager to set to automatically install anything, I have set it to "Only notify about available updates".
I have not been able to write to DVDs since the install except for once when luck seemed to play more a part than anything else. Does anyone have a fix for this?Well, after letting it sit and sit and sit, it looks like it does write the data. But, it's writing about 1/2 of a DVD for just 2 500K files.
View 10 Replies View RelatedUser familai with amd64 for computational chemistry and i386 for desktop. Seeking advice from users who succeeded in arranging a laptop with Debian squeeze or lenny, wireless LAN, 3D acceleration video, flash for speech. The laptop WITH STANDARD USA KEYBOARD should be available from European market resellers.
View 1 Replies View RelatedI am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?