"drm_fill_in_dev *ERROR* Cannot initialize the agpgart module". I have this problem during boot-up since i first upgraded to Squeeze n it has not gone away after several upgrades. Web search indicates its a kernel problem but no solution found. Is there a solution for this now?
View 2 RepliesI keep getting a warning messaged almost every time I reboot about Ubuntu running in low-graphics mode on a Macbook 5,1. This has been happening since Lucid Beta 1.
Quote:
Failed to initialize the NVIDIA kernel module. Please see the
system's kernel log for additional error messages and
consult the NVIDIA README for details.
[code]....
After I finish loading in low graphics mode I have to run "sudo nvidia-xconfig". Then, the next reboot the graphics card driver is loaded properly. Is anyone else experiencing this problem or have an idea how to correct it? I know it is a long shot, but do you think doing a fresh install of the stable release would work?
I am trying to get my Debian system running. I have an older Dell Precision 490 with two dual core CPUs. It has 16G Ram, an 150G Intel solid state drive, a 230G data drive, and a 600G backup drive. I have two Samsung monitors attached to the NVIDIA Geforce FX 5xx card. I have been using this machine for several years with Etch, then Lenny, running KDE 3.5. I recently needed to upgrade to Squeeze and KDE4 and have had nothing but problems since. I keep having issues with the video drivers, every time I touch anything the drivers seem to upgrade from the legacy 173 to the current 195.
There have been other library compatibility issues as well (gclib) and the machine has not been stable. This morning the system was running very slowly with X running at 100% (from top) and then the entire system froze. After a hard reboot, X did restart. The Xorg.0.log has the following message:
"Failed to initialize the NVIDIA kernel module! Please ensure that there is a supported NVIDIA GPU in this system, and that the NVIDIA device files have been created properly..."
I cannot count how many times I have re-installed squeeze, and do all kinds of fixes to grub, but no joy. Every time, there is this ntoskrnl.exe error, and to re-install it. I thought my WIN XP may be corrupted, so I reinstalled it, and updated it with sp3 and all updates. Then I re-installed squeeze (reformatting all partitions). At the end, the installer ask if I want to install grub to mbr. I replied yes. After reboot, only the 2.6.32.3-amd64 and the recovery kernels show up on the grub screen, no winxp.OK, I booted into squeeze kernel and looked at the /boot/grub/grub.cfg file, and there winxp is not included in /etc/grub.d/30_os-prober section. In terminal, I typed
#os-propber and it found winxp in /dev/sda1
then I typed
#update-grub
and now /etc/grub.d/30_os-prober now show winxp.I rebooted, and winxp shows on the grub screen, and I chose winxp.It came back with "ntoskrnl.exe ...error... re-install ntoskrnl..."Here are the details:
fdisk -l
root@SHUM-AMD64:/home/shum# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
[code]....
I'm trying to get my Intel HM55 GMA HD graphics card to work in Debian Lenny.As the vanilla Xorg didn't have any support for it, I manually compiled the last stable Xorg source (1.7.1 - such a pain) and the Intel driver. But when I try to launch X, I get the following message :
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(EE) intel(0) : /dev/agpgart is either not available, or no memory is available for allocation. Please enable agpgart.
I just finnished my slackware upgrade to current (as you may know from my previous post), and now i am facing another problem.When i type startx i get error:Failed to initialize the GLX module,...,try reinstalling the NVidia driverno screens foundOkay, i thought i should reinstall the Nvidia drivers..And then when i ran the driver install file, i got another error:Unable to load the kernel module 'nvidia.ko'....Kernel module load errorWhat should i do now ? Nothing works! New kernel
View 6 Replies View RelatedI just installed Ubuntu 10.10 and updated it completely. Then allowed it to install the nvidia-current package for my nvidia graphics card. I do see the GLX module load.
Code:
[ 11.298] (II) LoadModule: "glx"
[ 11.298] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[code]....
Every time I start up my Ubuntu 10.04 install, instead of the graphical login screen, I get an error dialog stating the following:
Code:
Ubuntu is running in low-graphics mode. The following error was encountered. You may need to update your configuration to solve this.
Also in the dialog are several lines of text:
Code:
(EE) <date and time> Failed to initialize the NVIDIA kernel module. Please see the system's kernel log for additional error messages and consult the NVIDIA README for details. ***Aborting*** Screen(s) found, but none have a usable configuration.I'm not sure what it means by "kernel log," or where any error logs might be saved. Any tips? Perhaps if I can find such error logs, posting them will help diagnose the problem.
If it matters, I have 2 monitors, an NEC AccuSync 120 CRT and a Samsung BX2440X LCD. I use them in Xinerama mode with the Nvidia drivers under my Ubuntu 9.10 install and have no problems there. To get normal graphics under 10.04, I have to start up in low-graphics mode, kill X server, reinstall the Nvidia proprietary drivers, and restart the X server. Then I have to do it all over again after the next restart, every time I want to run 10.04.It's very annoying.Also possibly relevant: I use the latest 32-bit Nvidia drivers for 10.04, version 256.53.I've found a few other threads where people had problems similar to this, but nothing exactly like my situation nor any real resolution so far. I hope it can be fixed, because there are other things about 10.04 that I really like.
I'm running ubuntu 9.10 64 bit (2.6.31-20-generic) on a Z600 HP. My graphics card is Nvidia quadro NVS450. I am using the Ubuntu Nvidia driver 185.18.36. I am experiencing random, daily system freezes where the system has to be manually rebooted. After installing the crash dump packages I am now getting a crash dump file and it's clear the problem relates to my graphics card.
Is this a red herring or the cause of my problems:
(EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so
(EE) Failed to load module "glx" (loader failed,
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
The NVIDIA X Server Settings shows a message "Failed to query the GLX server vendor".
Here is my xorg.conf file:
$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
Section "ServerLayout"
[Code]...
I have had this error for way too long. This post will be done in parts. I've had it for months now and I'd like to solve it. Every suggestion on linux forums, ubuntu forums, or some XYZ-linux blog seems to either work for just one boot or none at all. since I have updated my kernel on several occasions, I have also re-installed my NVIDIA kernel module by downloading the run file from NVIDIA's website. It also follows instructions from this post. I have installed the linux header files and the xorg-dev files from repository
I have also tried this.
My hardware (Alienway m17x - VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 260M])
Code:
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
[Code].....
Problem: computer and graphics card had been running for months without problem. For some reason, last night, things locked up...wouldn't think it's related, but happened when I noticed I was locked out of creating new folders on my usb attached My Book storage drive. So, from terminal I tried to sudo change permissions to read/write. Everything locked up. Now, every time I reboot it states needing to use low graphics mode "Screen, graphics card, and input device settings could not be detected correctly."
When I check the error log I see: "(EE) Failed to initialize the NVIDIA kernel module.."(EE) NVIDIA(0): ***Aborting* Screens found but none have a usable configuration. Fatal Server Error - no screens found"
If I try to then start in safe low graphics mode or restart X, I get the Ubuntu splash screen with the 5 dots that turn red to show progress...but nothing ever happens. I can switch to VT 1, login at command line, and type "startx" and then the graphical desktop loads just fine. Video playback, etc. is perfect and fine - not in low graphics mode at all. System seems totally normal.
However, I have to go through these steps each time I reboot. Also, I noticed that when I try to boot from Ubuntu Live CD I can't. I get as far as picking English as a language, then screen goes blank and goes to power saving mode (no signal being sent). This greatly concerns me as even though I have a work around for now - getting to command line then startx'ing - if I ever needed to reinstall from the CD, it seems I can't.
Some info on my pc:Running 10.04 on Compaq Presario SR1950NX AMD 64 GeForce 6150 LE/PCI/SSE2/3DNow! <- believe built onto motherboard on what I can do to fix? Is this a sign that something is wrong with my video card?
Trying to install the Suhosin module with the php 5.2.9 c5-testing repo...it won't run with the php 5.2.9 testing build (there isn't an updated suhosin package against the 5.2.9 build)
PHP Warning: PHP Startup: suhosin: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
What's the best way to handle this from an admin best practices standpoint? I want to do everything possible to keep the suhosin module tracked by yum for future updating etc. Is it best to try to find a suhosin rpm that is built for 5.2.9 and install it with yum localinstall? If not, if I build the module myself, what's the best path to keeping yum/rpm in the loop on this install for future updating via yum?
This problem has bothered me in both my previous install of 10.04 and my current one. Intermittently, booting into ubuntu results in ubuntu running in low-graphics mode, informing me that the Nvidia kernel module has failed to initialize.Running nvidia-xconfig does not help. Removing and then reinstalling the nvidia driver in Hardware drivers does not help. I experience the issue with both the 173 and current drivers.I love ubuntu, but this is making me seriously consider exploring other distros. Perhaps this not a bad thing - after I return from this exploration,
View 1 Replies View RelatedThis is the error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf), E:Error occurred while processing libwpeditor-dev (NewFileVer1), E: Problem with MergeList /var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_karmic_universe _binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
For several days I stuck on a problem despite my various searches on the net. I just installed a machine in RC1 Squeeze.
My Partitioning
Disc 1
/ boot RAID 1
/ swap RAID 1 and encrypted
/ RAID 1 and encrypted
[Code]....
I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:
Code:
(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[code]....
Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?
After upgrading to Squeeze, which comes with kernel 2.6.32, my system encountered DRM error and booted up with a blank screen. This happened intermittently. Searches on the Web did not give a definite answer. It seemed there was a bug in the kernel and this was cleared since 2.6.31 but I am using 2.6.32.
View 3 Replies View RelatedI installed ndiswrapper and tried adding a driver. Error: module ndiswrapper not found.So I recompiled my kernel, upgrading to 2.6.33.4 (no, I can't see the logical connection either) After a week, I got the new kernel working ( in the interim I reinstalled debian- it didn't survive my first kernel attempt. don't ask), and reinstalled ndiswrapper. Same problem. So I had a stoke of genius: download the source package!! So I did. Lo and behold, a new directory appeared in /usr/src/ : modules. I took a moment to admire my work, then I jumped in.I 'ls'ed to see what was going on, and found a Makefile. so I typed 'make'. First error: kernel source not found. So I entered the Makefile, found the(clearly marked)variable,and changed it to /usr/src/linux-2.6.33.4 , exited, and redid 'make' Second error: no wireless support in kernel. So I went to src/linux-2.6.33.4 and did a make menuconfig- loaded my current, threw in wireless, and exited.
[Code]...
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
I installed squeeze with 2 drives, one for squeeze (2.6.32-3-amd64 using 120GB hdd), and one for my old winxp. I used LVM with ext4 on /root, /home, and ext2 for /boot. The install gave me grub 1.98.
When booted, screen says
Loading Grub
Welcome to Grub
I just got Squeeze loaded on computer and getting several error message during boot up. Something about 368623 and 368761 PCI Bar 6 collision. This is a first for me on Debian OS. It happens so fast I can barely write it down. Is there a log I can access to see the entire entry?
View 14 Replies View RelatedSo, I installed AGAIN Squeeze
And again boot fails
Now it shows error 15
I tried booting into a LiveCD (ubuntu) to see what is happening
But I can't open grub.cfg file (you're not the owner, it says)
What do I do to boot into my new squeeze?
I have installled eyeD3. It works on the commandline (bash). But I want use it in python3.
I did get this error:
Code: Select all>>> import eyed3
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named eyed3
Why cant I use this module for reading and writing tag information to mp3 files?
I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.
View 5 Replies View RelatedI'm getting the following error when trying to extract a rar file using Squeeze in XFCE.
"Command exited with status 256."
On a fresh install of squeeze, I can't log in to an AIM account with being immediately disconnected and given this error: You have been connecting and disconnecting too frequently. Wait ten minutes and try again. If you continue to try, you will need to wait even longer.
I waited for several hours before trying to reconnect, but got the same message. Searching for the error led me to some bug reports from upwards of three years ago.
Strangely, this error hasn't occurred on any of my other squeeze systems.
I can ping login.oscar.aol.com as well as login.messaging.aol.com; both resolve to 205.188.251.43 for me. I tried changing the "Server" under "Advanced" to this address, but again I got the same error.
sshd is openssh-server 1:5.5p1-6.
I'm getting "Can't open display" all the time when I log in the server through ssh.
penguin@theblue:~$ xeyes
Error: Can't open display: laptop:0.0
penguin@theblue:~$ export DISPLAY=192.168.1.101:0.0
penguin@theblue:~$ echo $DISPLAY
[Code].....
The problem I found is sshd server set DISPLAY to localhost all the time.
Is usplash supposed to work? It hasn't worked correctly in squeeze (for me) for some time. It appears for like 2 seconds never to be seen again. And I never see it at shutdown. I tried splashy, but no splash. Plymouth has been no go with nVidia cards. I don't know if that's changed, but I get no splash with that either. usplash doesn't seem to be in the sid repos. Is it obsolete, or just not packaged yet?
View 5 Replies View RelatedI've been running squeeze for a couple of weeks now, no problems, just some minor sound issues but that is not important ATM.Everything was working fine until this morning i guess, the boot process goes as normal but at one moment it just freezes for no apparent reason it just says Starting K Display Manager:kdm. Has anyone experienced this problem before, or has a solution?
View 3 Replies View Related