I have Debian 7 with LXDE installed on a msi-based-notebook. Immediately after i make the login (in graphics mode), the LED of "num lock key" turns on and lock,making the keyboard impossible to type properly.
I've tried to reconfigure keyboard,but it had no effect. And yes,i have tried to use the "Fn key + num lock" combination, but had no effect too.
Is there a config file to toggle whether the screen is locked after hibernation? I looked all over preferences but if it's there, I missed it. In Ubuntu, the screen was always locked after waking up. In Squeeze, it's going directly to desktop. It's not a biggie but you never know when someone might try to access your account so I kind of liked that it would wake up locked. Maybe it's doing that because I'm the only user on the system?
I've Debian 8 and i have a problem. I lock the screen of my laptop, but when i want to re-log the video and wallpaper start immediatly and also the clock, but, the mouse and the keybord adon't work for about 30 second / 1 minutes.
I use Unison to synch files between my netbook and desktop. Have done for a while without issue. I hadnt used it for a while and now, when doing so, i cannot get it to work.I get the following error message:
Code: Looking for changes Fatal error: Warning: the archives are locked.
I'm having problem with the Samba 3.2.5 file share which host my MS-Word Document the user (user1) already restart her PC but still she cannot open the file from MS Word.
Here's the file and it's status on the samba drive:
I can't log in from a locked screen anymore, such as when returning fromeep or hibernation. I can, however, work around the problem by clicking "switch user" and logging in from the GDM greeting screen. Logging in from a terminal also works.I recently had a problem where /etc/passwd, /etc/groups and some other files were deleted. But I have restored them - otherwise I couldn't log in at all.
I am using Ubuntu 10.04 TLS from a pen-drive (running Ubuntu example). I created a new user account. When I lock desktop it correctly turnout the screen (everything go dark). When I move the mouse Ubuntu returns perfectly. My problem is that in any time I am not asked for password. I want that Ubuntu while locking ask for password to login again. I already tried configuring lock down and lock properties (application) via gconf-editor.
I've got an HP Netbook with Jaunty installed, and I've got an older Dell laptop running Debian.A friend of mine, on several occasions, has told me that when I left my computers unattended he could do some kind of series of key-strokes, and then a window comes up and he says that he can change the password for my account.I've asked him to show me how he does it, but he never will because he doesn't want me to be able to thwart himIs he lying, or is it for real? if it's for real, how do I go about changing it so that it can't happen anymore?
While I was away from my computer a friend changed my keyboard layout to a random layout thinking he could revert it via mouse actions only. Unfortunately, by the time I returned, my screen was locked. Now I cannot unlock my session to get back in to the KDE session to restore the correct keyboard layout.
However, I can log in to a console. In the console (e.g., Ctrl-Alt-F1), the keyboard layout is unchanged, so I can edit any text files and make any other changes required. How can I change the KDE keyboard layout from a console? I'm running Kubuntu 10.04. There is no .kderc file in my home directory. And Xorg.conf doesn't contain the settings either. I'm not sure where else to look.
I just installed Fedora 12 earlier today using preupgrade. Everything seems to work alright, but I do have a couple of problems. I've had this happen twice already, but when I'm booting up, my machine will freeze once the Fedora logo is shown right before I get into the login screen. Another problem I've had is when I do boot into KDE I'll see an ! icon next to the clock telling me that there has been a crash in the kernel.
Edit: Update- It only hangs when I reboot. If I restart in windows and try to boot fedora, it hangs, if I restart in Fedora, it will hang after the restart. The only way I can boot Fedora is from a cold boot
Edit: I seemed to have fixed the problem after searching Google for 20 minutes. I just ran this command as root.. #chcon -t system_dbusd_exec_t /bin/dbus-daemon
I logged in as root. i want to activate screensaver which required password. Installation version is RHEL 5 server. I have installed xlockmore-5.28-1.el5.rf.i386.rpm but when i run xlock comand in terminal window, it shows error e.g. libGL warning: 3D driver claims to not support visual 0x5b xlock: symbol lookup error: xlock: undefined symbol: DPMSQueryExtension
I recently set up a family computer for a friend, and now his son is "experimenting" with the terminal (randomly entering commands). since he could accidentally do something bad, I am supposed to prevent him from using terminals, but only as hi user. I tried vlock and away, but with vlock it says 'this terminal is not a virtual console', and away can't seem to lock all consoles.
I am trying to disable accounts after 5 unsuccessful login attempts. I am following the guidelines in this article:
[URL]
This is on an Oracle Enterprise 5.4 box, which is essentially RHEL 5.4 Here is what my /etc/pam.d/system-auth looks like:
-------- #%PAM-1.0 # This file is auto-generated. # User changes will be destroyed the next time authconfig is run.
[code]....
Unfortunately, the account does not seem to be locked or disabled. As root, runninng 'su test2 -c <some-command>' always sucessfully runs <some-command>, and leaves the failed attempt count at 6. /etc/shadow does not have an * or ! anywhere in the encrypted password for the 'test1' user.
What am I doing wrong? I thought that with the max attempts set to 0 in faillog, that the deny= parameter would be used. I thought I should be using su <user> -c <command> from the root account to test if the disable feature is working.
I have a new Lenovo (thinkpad) x100e laptop. I've recently installed the new Ubuntu 10.02 distro and have found the oddest bug. If my power cord is disconnected (i.e. if I'm running off battery power) then the login window locks up. Conversely, if the power cord _is_ connected then things work as usually. (Also, trying to adjust brightness causes a crash --- but I suspect that this is not odd). Where I should put this information.
Is there a way to set Linux to automatically log in to a specific user account and at the same time lock the screen? I want to save time and trigger various software that always should start up on boot, while leaving the computer unattended during startup (extra important and practical for remote control boots), by enforcing a 'screen lock' so that no-one can see what happens behind the login screen without entering the login credentials.
I am facing one problem, whenever I login to my Linux machine with caps lock key on i.e. ROOT inspite of root (password in lower case letter), I am able to login and after that all letters comes in upper case letter only.
I started a remote VNC connection from my Windows pc to my Ubuntu desktop, got presented with the Ubuntu login screen. Entered my password and accidently clicked the "Switch user" key instead of "Unlock".
The login panel became grey and now I cant do anything (I guess its because there is no other user). When I exit and enter through VNC I allways come back at the same grey screen (see screenshot below).
Is there any way of bypassing this and unlock my ubuntu desktop?
I'm having one of those days, and managed to delete some virtualbox disk images. But the virtual machines are still up and running just fine. So the deleted disk images still exist somewhere.
Is it possible to recover these files? Since they are in use and locked by Virtualbox I guess they still are completely intact and fine on the disk, but that they will be permanently deleted once VirtualBox stops.
I'm using Debian Squeeze. Just noticed that my system time has slipped back an hour and I can't adjust it because even though I give the root password, the buttons remain inactive.I checked a few other apps that need root authorization and found that - System --> Administration --> Network behaves in the same way.
I have a Powerbook G4 1.67Ghz. My problem is that if I sleep my laptop by choosing sleep from the desktop menu in kde then it sleeps and wakes fine but when it wakes the pointer is locked to the x axis and tends to snap back to the same point when I'm not actively manipulating it. This is also the case if my laptop sleeps after 10mins inactivity. If I sleep the laptop by closing the lid this problem does not occur. When it wakes all is working well.
I just downloaded OpenOffice 3.2.1 from the openoffice.org weebsite. I followed the instructions precisely and everytime ended up in the same error message - 'error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Permission denied)'. I am using Fedora 13.
When i connect windows server 2003 from ubuntu these error displayed .When i installing the tsclient, by executing these following command from a Terminal window:
sudo apt-get install tsclient
When i run these command the following error displayed.
E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
I have a HP Pavilion dv4 that is 4 months old. Yesterday it suddenly seemed to restart then once I logged in it turned off. When I tried to turn it on some of the lights came on and the caps lock and num lock started flashing. Since then I have not been able to get it to work correctly.It once seemed to turn on but died again after the login window.I tried to use my live cd but the same thing happened. It started loading once, but then shut down again. Every other time it stayed dead minus the lights
I recently installed Ubuntu 11.04 on an old Sony Vaio laptop. I was following some of the steps here..[url]
The step "Enable Full DVD Playback(Dual Layer DVD Support)" did not finish correctly doh and now I can't use 'sudo apt-get' for anything or the software center or using the 'Update Manager' does not work.
The update manger says it may be caused by an update not finishing correctly which sounds correct as explained above. The apt-get command gives me back the following....'Could not get lock /var/lib/dpkg/lock resource temporarily unavailable' 'unable to lock administration directory /var/lib/dpkg is another process using it?'
I tried the obvious restart but that hasn't worked.
E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/) , are you root?
I have pidgin2.5.2. I want to install pidgin2.6.6.How can I do that?E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
There is a very strange problem I've been having. When I enable either Caps Lock or Num Lock the media controls on my keyboard cease to work. I have Googled this one to death but found nothing. This problem existed in Xubuntu 9.10 and now still exists in Xubuntu 10.04. The keyboard I use is a Logitech Elite Keyboard. I would love to be able to use the Caps Lock and Num Lock without the worry that I am disabling the media controls
I have just burned the latest CD using infraRecorder, as per the instructions on this site, however when I boot from this CD, it spends about 5 minutes moving the red balls across my screen, then all of the sudden it just freezes, and my caps and scroll lock lights start to blink. I've had a look in the forums already but there's nothing about this happening on Boot of the live CD.