When I open Iceweasel, terminal eg, the mouse grabs the new windows in the middle so I can move it and i have to click so it releases It, but I do not want that.Is there any way to disable it?I am using Cinnamon if it matters.
View 0 RepliesOne of those things that make yo go "WTF?" After browsing the internet with Firefox, there appears a peculiar problem: if I move the pointer to a certain area of the screen, I can't click (left, right, middle) nor use mouse wheel. The area can be of variable size, but usually it's small, in the lower part of the screen, it's x dimension greater than y one (a horizontally placed rectangle). The problem doesn't go away when I restart Firefox (obviously it does when I reboot). It obstructs any window under it (I can't even click on the desktop where 'it' is). It's as if there is an invisible window that 'steals' focus when I move the mouse over it. I'm on 11.04, Classic Ubuntu (Gnome 2.3x).
A quick UPDATE: dragging an icon and dropping it on the said area behaves as if I dragged an item and dropped it where it doesn't belong (i.e. it just slowly returns to it's original position). Also, I tried killing it with Force Quit applet, but only my desktop reloaded.
I installed today debian wheezy from OpenSUSE system via bootstrap. I have some strange behaviour with kde. At first kde worked fine and the only problem was that if I tried to logout from kde session, instead of kdm shows up, a black screen appear with mouse cursor working. I first ignore this error(because I had some problems with audio) and just reboot from vt console or sometimes restart kdm service. After I solved the audio problem I've searched to find some solution about kdm black screen problem. I found on kde forums a solution about terminate xserver option on kdmrc file, which didn't work in my case, but create another problem.
The problem is that now when I pass the mouse cursor from windows topbars I have glitches on window decorations. So I disable the above option again, reboot but the graphics problems was still there. I tried to uncheck vsync from desktom effects and the resault was all desktop effects to be disabled. Now I cannot re-enable desktop effects any more. But now I can logout and relogin. 3D works fine(glxgears works) but I cannot enable desktop effects. And I think that some effects work, because I see some smooth movements and fade outs when I pass the mouse cursor on kmenu items. My card is ATI radeon HD 4650, and I have the xorg-video-ati driver installed.
I'm trying to setup a webcam surveillance system. Zoneminder didn't work for me regardless of how I tried configuring it, so I gave up and have now settled on a more primitive solution. I've currently got 6 cams and looping streamer (webcam screen grabber) I can grab a picture from each camera with about a 1 second interval. The previous picture is overwritten and using javascript to reload the image continuously in a browser I get the desired "movie" effect I'm after. The problem however is that as soon as I start using streamer on more than two cameras at once I run into this little snag:
Quote:
libv4l2: error turning on stream: No space left on device
ioctl: VIDIOC_STREAMON(int=1): No space left on device
I've been searching around and it seems I need to increase my shared memory. I've done that (tried many different values and "solutions") but the problem remains the same.
My setup is as follows.
1.php (refreshes updated grab from camera 1 every second in the browser)
2.php (refreshes updated grab from camera 2 every second in the browser)
3.php (refreshes updated grab from camera 3 every second in the browser)
etc
etc.
Is it possible to use something like php exec to execute the command that starts 'streamer' that grabs the image from the specific webcam (/dev/video1 for 1.php and so forth) when 1.php is opened in the browser. Is this even possible, or am I just dreaming?
Fresh install of Debian 8.1, have not changed a single setting anywhere. Was scrolling in the web browser and noticed that if I scrolled up or down fast enough the active window changes. Using kde as the desktop environment. Also this has nothing to do with the browser as it happens with anything I have open. Heck trying to scroll in console and having a document open just flips between the two of them. Only way this does not happen is if I scroll slow enough.
View 1 Replies View RelatedA client of mine brought a Dell Inspiron 1501 laptop with Debian Lenny + KDE3.5 installed.The problem is that USB mouse won't work, no matter which USB port is used. If I move the mouse, after 5-6 seconds, the arrow moves a bit and that's all. We have tried 3 different mice; one is mine which works flawlessly on my Linux installation (btw: the laptop has its OS installed by me)USB keyboard works with no issues.I have tried the following but with no results:
1. upgraded BIOS
2. recompiled kernel
3. commented the "blacklist usbmouse" in /etc/modprobe.d/blacklist so it could load the old driver
4. as last resolt I also disabled USB legacy support in BIOS
PS: The OS will not be upgraded to Squeeze because she is not staying in the country and later support for unpleasant suprises is not possible.
I've had a problem now for some time with debian ever since I did an upgrade sometime last year.. My cursor seems possessed.. It opens all sorts of mysterious windows, closes others and darts from screen to screen for no apparent reason..So...I purchased a new debian disk, reinstalled everything even after having reformatted my hard drive a few times under another system that will remain unknown and I STILL have the same problem.. I didn't have this problem under other systems.. I even have a DSL disk I can run from a CD and it runs fine, but for some reason Debian is the only one with this issue.
View 4 Replies View RelatedI am using empathy, for facebook chat desktop pop-up notifications. The problem is, when i close the chat i cannot re opened it from the low bar like the previous version of gnome because when i put the mouse pointer down, off the screen the low bar does not appear.
View 5 Replies View RelatedI would like to change the style of window but not "look".do I need install : GTK + ??
View 4 Replies View RelatedI can't move/resize/decorate/restore the vlc window. It takes up the entire screen (even though it is not in full screen mode) on one of my monitors. I'm using Openbox. This doesn't happen with any other type of window.[URL]..
View 4 Replies View RelatedMy mouse cursor is disappearing when it's not moving, or when I scroll a window with the middle wheel... Then when I move the mouse, the cursor is appearing!
This has started after few things...:
- old video card has died (ati hd4850)
- integrated motherboard video card used (ati hd4250) after solving the black screen (xorg, ati drivers... you know :s )
- since many weeks, computer has not been used before I've plugged a hd7970, solved 1 more time the black screen (.....)
And after many updates + this new video card = cursor is kidding :p
I've tried to change my cursor settings in the GUI config, nothing better.
MATE + XFCE
Problem solved by renaming all cursor files...
I'm trying to make my mouse pointer invisible /transparent (for touchscreen purposes) in Xorg.
View 4 Replies View RelatedI have a very old Pentium 3 that don`t have USB or PS2 suport.
I need to configure a serial mouse.
I did it on debian etch editing xorg.conf. I chage the mouse protocol to "Microsoft" and it works normaly.
But on squeeze it does not exist!
How can I configure it?
Sun VBox
host - Debian 5.0
VM - Ubuntu 10.04 (lucid)
gnome desktop
rdesktop
Running rdesktop to connect the VM on the host connection can be established with VM desktop displayed on the host desktop. But there are 2 mouse pointers on VM desktop. It is difficult to control. One mouse pointer does not work but hanging there. 2 pointers moves simultaneously.
I've been trying out suspend occasionally on Debian Testing to see if it works. After the last time though Gnome won't come back up again, I just get a movable mouse cursor and no panels or right-click options even after rebooting. I can switch to text consoles and kill X but starting it again results in the same behaviour. I noticed there have been a few Gnome and Xorg updates lately.
View 3 Replies View RelatedOften when I leftclick with the mouse it registres it as a double click.I am running Gnome, and in the mouse center, it does not help to move the slider.I know it is a issue with Xorg og Gnome, since it works fine in Windows (dual boot).Any ideas to what the issue is?--edit--I have the same problem, when I use the scroll button to click on items, in exampleiceweacel to open it in a new tap. It opens two tabs, instead for one!-edit--Damn, it is actually the same issue in Windows. Need a new mouse
View 6 Replies View RelatedIt's been a long time since this started, and unfortunately I don't remember when this happened first. It only happens to Iceweasel and Icedove I guess. (I'm not sure!)
Used to happen in GNOME, now the same problem in Fluxbox.
The exact problem, is that when I have Iceweasel or Icedove open, and I'm using them, suddenly when I click nothing happens. But, if I use the keyboard it'll work... When this happens to Iceweasel or Icedove, the whole window manager becomes useless... When I want to close the windows, nothing happens, etc. Only the keyboard will work... Sometimes when I right-click on the navigation toolbar in Iceweasel, or somewhere like that, it'll work, and I'll be able to work for a few minutes... Then this will happen again, and usually, this time right-clicking on the toolbar and those areas will not work either... Even if I close the windows, the window manager will still not respond to mouse clicks... I don't understand what the problem is, but whatever it is, it's very annoying!
I'm trying to find a GUI program (not a terminal command) to bind the 4th and 5th buttons on my mouse to ALT+Tab and Escape. I tried BTNX however I encountered the error "btnx-config needs the file /etc/btnx/events to run". A good example of what I'm looking for with screenshots on it's site is X-Mouse Button Control which I've been using on XP however it's not available for Linux.
View 2 Replies View Relatedxdm which refuses to load a window manager. I run Debian squeeze. xdm tries to execute /etc/X11/xdm/Xsession, which is actually an empty file, and fails with the error 'too many open files'. Afterwards xdm terminates the session and executes Xreset. Here the entries from the log:
Sat May 22 11:27:19 2010 xdm info (pid 2246): sourcing /etc/X11/xdm/Xsetup
Sat May 22 11:27:23 2010 xdm info (pid 2246): sourcing /etc/X11/xdm/Xstartup
Sat May 22 11:27:23 2010 xdm info (pid 2275): executing session /etc/X11/xdm/Xsession
[code]....
I was unable to find anything valuable concerning this problem. This is kind of annoying because I always have to switch to a console, stop X and startx X manually using startx. Then everything works out just fine. Unfortunately I am not yet that familiar with the setup process of X.
I want to known how can I change the windows appareance and not the style.When I execute for exemple a prgram like thunar or iceweasel ... the button the window background are with a depth I want to try to window without a depth like this
[URL]
and not like this
[URL]
I download a lot theme so when I copy this theme in the syle repertory I change it in the open menu and only the titlebar change but not the button, scroll bar ...how do I do to change them ?
I'm deciding to go with a window manager instead of a desktop environment. I want to go simple and lightweight, and I know a lot of you run window managers such as openbox, fluxbox, and some tiling ones like xmonad, awesome and dwm. I want to give xmonad a try. For those of you who run tiling window managers, how do you know what is running in the background? There is no system tray in a screenshot such as this: [URL]. I'll be playing around with xmobar because that seems to be a popular panel with xmonad, and that's what's in that screenshot.
Also, how do you run your programs? You don't run it always from the command line, do you? When I want to run Chromium, I have to start up a terminal and load it that way, having the terminal and the browser open when using the browser. I know other window managers like openbox provide a right click menu, but xmonad doesn't (or does it?). I know a lot of people who use tiling window managers also use a lot of console apps, and I like that feel, but I don't think I'd want text for everything, such as the web.
Previous X was 1.4.2. After aptitude upgraded X Window to 1.7.7, startx crashed complaining: XKB could not find /usr/share/../rules/evdev file. There is no evdev file.
How do I modify xorg.conf to work with evdev? I spent few hours to figure out evdev. It seems it's new style of managing input devices in X Window. The information isn't friendly to migrate from old to this.
When I put Option "AutoAddDevices" "off" in ServerLayout section, it literally froze X Window. X started without mouse/keyboard control. I had to turn off power switch. Now, I can't use X at all unless I move back to 1.4.2.
I have a couple of questions and one problem regarding my AMD64 Testing box. According to this Debian Xorg Wiki : Xorg is the default X Window server since Debian 4.0 (etch). It replaces XFree86 and is maintained in Debian by the XStrikeForce. But...it appears that I don't have Xorg as my X Window server, but rather XFREE86? I just checked my i386 Testing box, it does have /etc/X11/xorg.conf
[Code]...
The problem: I have lost my higher screen resolutions after today's apt-get dist-upgrade. I only have 800x600 and 640x480. I probably won't complain about these resolutions in twenty years or so, but for now, I'd rather get the higher resolutions back, ha.
[Code]...
I installed debian 7 with lightdm and MATE 1.8 (from backports) on a new PC.
Since the first day the mose keeps disappearing. For example when I click on something, the mouse disappears and only comes back when I move it. Sometimes it already disappears when hovering over a button (especially annoying when it happens while you try to resize a window).
That problem did not happen for example in LXDE, which I installed just to test that.
I did install MATE 1.8 on several laptops/PCs so far, never hat that problem. Maybe it's because of quite recent hardware?
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Device 041e (rev 06)
I use the debootstrap to make a base Debian System of the ARM architecture for BananaPro [URL]... , and install the LXDE desktop. But the keyboard and mouse didn't response after the LXDE boot.
If I use the Debian system without the LXDE desktop, and it is normal. Meanwhile, I only installed the framebuffer driver, and can't find the right GPU driver to install.
Is caused by the lack of the GPU driver ? and what should i do ?
I get some error logs from /var/log/Xorg.0.log file,as follows:
Code: Select all[Â Â 17.206] (II) Module shadow: vendor="X.Org Foundation"
[Â Â 17.206]Â Â compiled for 1.12.4, module version = 1.1.0
[Â Â 17.206]Â Â ABI class: X.Org ANSI C Emulation, version 0.4
[Â Â 17.206] (==) Depth 24 pixmap format is 32 bpp
[Â Â 17.207] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[Â Â 17.211] (==) FBDEV(0): Backing store disabled
[Â Â 17.212] (==) FBDEV(0): DPMS enabled
[Code] ....
I have a trackball with only two buttons. And I searched for a way to scroll (wheel simulation) with the trackball.
I already managed to emulate the wheel when holding a trackball button (eg, the right click). I succeed using xinput as described here. But clicking on the right button when rolling with the same hand is not very easy (indeed it is even difficult).
And since I have some media keys (XF86 on the far most left corner of my keyboard it could be very convenient if I can simulate the wheel using a key press.
Unfortunately the evdev option "Option "EmulateWheelButton" allows only to use a mouse button no key from keyboard.
So I found a way to map a keyboard key (in my case the "Audio Player Next Track" shortcut) to the right click using the three steps [URL]..... So pressing the key actually triggers a right click and this works very well ... with two exceptions .
The first one is that I don't know why but this completely disabled my numkeys (the numpad at the right end of the keyboard).
The keys control the mouse. After I checked under the "universal access" I saw that "Control the pointer using the keypad" option was checked. But this could not be a problem and I could be satisfied without the second problem..
Which is that my keyboard simulated right click do not actually enable the wheel emulation since the rightclick should be held down...
When pressing and holding down the real right button of the trackball it works. Even when holding the right click with a regular mouse.
But using my shortcut key I'm unable to generate a keydown event.
Is there a way to map the keyboard key and the mouse button like this :
a key press => a regular right click
a key down => a held right click
a key up => a right click release
I have a problem with mouse and keyboard. Both freeze within 30sec to half an hour after logging into squeeze 64bit (using gnome). My hardware is Asus P7P55D EVO (tested with linux according to ASUS) with Intel i5 760 CPU. I use IBM keyboard and Trust PS2 mouse. I also have MSI HD4350 graphics card, that was at least listed on Ubuntu to be supported, worked fine also with Lenny.
When using same combination with Lenny (64-bit) I never found any problem with either keyboard nor mouse, even running long nights. However there was need to upgrade to Squeeze since it has newer kernel supporting the sensors on board my MB. I used same mouse and keyboard also on Ubuntu 9.10 and had never problems. However when I upgraded to new MB I started with Ubuntu 10.04 64 bit version and experienced same keyboard and mouse freeze as I have now in squeeze. Only way out from this status is hard reset using PC reset button.
I connected with putty to my linux box and found following (while the linux box was on frozen state) from dmesg on keyboard: :/var/log$ dmesg | grep -i keyboard [ 1.064628] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
I rebooted my system about a few days ago to find that whenever X was started, my mouse and keyboard would not function. I am unable to even switch to another tty when this occurs, however alt+sysrq+r will allow me to switch ttys again.
Xorg.0.log
[ 70.287]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[code]....
Spice server/client configuration. I used remote viewer on debian jessie to connect to a guest virtual machine on kvm and everything works fine. It used a spice server / client and qxl. After I upgraded to debian stretch, I suddenly face issues with black bars in the remote client window. Those black bars appear only on the left and right side of the remote viewer window. Also in full screen mode the black bars sadly appear. Maybe the scaling mode is somehow disabled or my screen resolution of the host was wrong calculated related to that i can change the guest screen resolution but the spice remote client keeps its window size with the black bars. I was trying the last couple of days to resolve this issue, unfortunately without success.
View 10 Replies View RelatedI am new to debian. While I am playing a video in vlc or in any other player its playing well in small sized window, but if i am making it full screen the video is getting blur...blinking..getting slow..but sound is okay.
View 1 Replies View Related