When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
About two weeks ago I enabled KDE factory repo to get the latest KDE 4.4. Everything was fine until a recent update, which caused sound working only in some applications. Sound now works when tried in System Settings and Yast->Sound, but it does not work in Firefox, VLC, Skype, and so on.
I ve installed ubuntu 10.10 on hp g62 amd64, but on skype mic doesnt work. I ve tried playing with pulseaudio controller and everything is unmuted as well as in alsamixer. how can I solve it? i think there is some problem with alsa, because when i restart skype mic work by few minutes but after that not.
After update to latest phonon (4.4.0-37) - with kde 4.4.1., it doesn't recognize pulseaudio anymore. I am using xine backend, but I can't find 'PulseAudio Server' device entry in phonon configuration
Is there special pulseaudio configuration so phonon will regonize it? code...
I have amd64 Debian Jessie and i386 Debian Jessie installed on my laptop. I wanted to start x86 app that is installed on my x86 OS from my amd64 OS using chroot.
My mounts inside chroot: Code: Select all/dev/sda7 on / type ext4 (rw,relatime,data=ordered) /dev/sda5 on /tmp type ext4 (rw,relatime,errors=remount-ro,data=ordered) /dev/sda5 on /etc/resolv.conf type ext4 (rw,relatime,errors=remount-ro,data=ordered) tmpfs on /dev/shm type tmpfs (rw,relatime) proc on /proc type proc (rw,relatime) devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000) none on /sys/fs/cgroup type tmpfs (rw,relatime,size=4k,mode=755) systemd on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd) /dev/sda5 on /var/lib/dbus/machine-id type ext4 (rw,relatime,errors=remount-ro,data=ordered)
sda5 is host OS and sda7 is guest OS
when I start any x86 app I can see "failed to create secure directory (/run/user/1000/pulse) permission denied" how to make pulseaudio to work inside chroot?
I am using a couple of Debian Distro (Sid and Lenny) add some Ubuntu into the mix. I made the switch because I was amazed and satisfied with Debian --> once installed, everything works. For me that's okay for o so many years now. I don't question a lot because it just works and I do my job on it satisfactorily. Namely programming the LAMP style programming. Lately I have been using Debian to communicate over the internet -- using Skype and Pidgin and other such things, not to mention listening to music, watching movies, just using the default applications when I originally install Debian.
Along the way, I need to configure something -- that is desktop related -- like the screen resolution of a new LCD monitor replacing the old one and such. Now about my sound -- I'm not touching it because it is working. But that is not the case always. Now I have a constant error -- it is irritating. Rhythmbox don't make a sound always when I have open a web browser (iceweasel, chrome, epiphany) and a site with multimedia object on it -- like a video or something. So how do I correct this? How do I know, too what I am using -- ALSA or Pulseaudio?
I have a problem on a fresh install of Jessie with KDE. I have three soundcards. In Wheezy I used pavucontrol once for each application to change the sink from the internal to the external soundcard, and that setting would stick each time I rebooted the system (audio would go on the external soundcard). Now each time I reboot the audio gets routed to the internal soundcard and I have to use pavucontrol each time to route the audio back to the external one. URL...
and none of them has worked. I don't know if it's a related issue, but the settings I choose in the for Phonon in the KDE multimedia settings don't stick either. I select the external soundcard as default device and upon reboot the internal one is on top on the preferences list.
I've noticed in pulseaudio have many options to make my sound discoverable via upnp/dlna server. I've got a ps3 and a Pinnacle Soundbridge, suitable for this protocol and working fine with mt-daapd or ushare.But I would like to use mplayer and making the sound available to my devices. I've activated the options in Pulseaudio (paprefs) but can't play music in my client device and I can't see the server in the lan.this is my config:sound Preferences
I'm having a problem with Pulseaudio for quite some time, I already made some topics about it. But still no solution. The thing is, I can't use my keyboard volume control, it's only manipulating my ALSA configuration. Not my main Pulseaudio volume. Here is some information about my sound card:
$ pacmd list-cards Welcome to PulseAudio! Use "help" for usage information. >>> 3 card(s) available. index: 0 name: <alsa_card.pci-0000_00_1b.0> driver: <module-alsa-card.c> owner module: 4 [Code].....
I got a problem with gstreamer programs and pulseaudio. I am running Debian Squeeze and needed to install pulseaudio to get better bluetooth-headset support. After installing everything every application except gstreamer applications could access the sound server the right way. Even flash and sdl are running via ALSA routing to pulse.
If I start programs running with gstreamer they crash with a segmantation fault. Totem does not start anyway. If I run it in the terminal it crashes immediately with a segmantation error. The debug mode prints out $ totem --debug
(totem:3450): Totem-DEBUG: Received SaveYourself(SmSaveLocal, !Shutdown, SmInteractStyleNone, !Fast) in state idle (totem:3450): Totem-DEBUG: Setting initial properties
[Code]....
I have installed the gstreamer plugin for pulseaudio and the gstreamer-plugins-good and bad. I started gstreamer-properties and choosed the right output driver. When testing the peep comes out of the right output.
Via google I founded some bugs, that were similiar to mine. But they had made the mistake not to install the plugins. I also can not choose ALSA in gstreamer and do the routing way. The programs using gstreamer simply crashing. I tried exaile. It also crashes the same way like rhythmbox. Is it a real bug? Or can I do something against that. VLC and kaffeine running very well. But I would be sad about not being able to use rhythmbox. I like that fast program. Or is there a way to get rhythmbox tto not using gstreamer?
This is Debian 8. Pulseaudio uses 44100hz by default, with 48000hz as the 'alternate sample rate'. The hda sound driver on this (and seems most) audio hardware supports 44100, 48000, 96000 and 192000 sample rates. Anything else, pulseaudio resamples it. High quality resampling settings use more cpu resources, so it's best to use one of the supported sample rates, when possible. This is done by default for 44100 and 48000, but if you want to use 96000, for example, you have to set it in /etc/pulse/daemon.conf as "alternate-sample-rate = 96000". But this causes 48000 audio to be resampled.
44100 and 48000 defaults make sense since this is the majority of audio content these days, but I do have some 96000hz audio. I know there were reasons why it was limited to one alternate, but I could get around the issues. So, is there a way to configure more than one alternate sample rate for pulse audio?
I'm having a problem all the sudden with amixer. set Master 5% used to control the pulse audio master volume. Suddenly, it will only raise and lower the headphone volume. Pulseaudio works, but I no longer have a master volume at all.
I have recently acquired a Lenovo Q150 machine and attempting to use it as a HTPC. I've been reading that with this platform a newer kernel is required to make wireless, sound and a few other tweaks work correctly--so I bumped up to testing repositories to upgrade to the 2.6.38 kernel.[URL]...
The audio on this device has been more than a pain. I'm currently using XBMC to play media on this device and after setting the outputs to custom: plughw:1,9 sound is played correctly. I found this out by using alsamixer, selecting the sound card with the F6 key (Nvidia 1) unmutting all outputs, quiting, and running speaker-test -D plughw:1,X where X is the sub-device from the output of aplay -l until sound could be heard from the receiver.
Now my problem is that applications like mplayer, and iceweasel won't output any sound. I'd prefer not to use the optical out on the device and would like to send sound over HDMI. Has anyone had any luck getting it to work as it should?
I've also installed pulseaudio, not too sure if this is really needed. I've also used module assistant before upgrading to compile alsa from source, it worked but i just decided to upgrade the kernel instead of dealing with m-a every time an update comes through. Linux floppy 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux
I just installed skype 2.1 beta 2 (the deb file) from the skype website, but the only option I see under Sound Devices -> Recording is "PulseAudio Server (local)" This doesn't work for me, as the skype test calls don't actually record anything I say. I use skype a lot and FINALLY got it working under karmic, but I needed to upgrade to lucid and now it's broken.
When I open Sound preferences and look at the Applications section, Skype shows up as recording when I run its test call... but no sound is recorded? How is it possible that my sound card picks up something recording but doesn't actually record it when I'm in skype?
I've had nothing but trouble with Pulseaudio in Fedora 14. I had managed to get rid of it in Fedora 10 with the command: su -c "yum remove alsa-plugins-pulseaudio pulseaudio" I just don't want to have to deal with Pulseaudio anymore. It does not like my sound card and gets in the way. Is there a Linux distribution that does not use Pulseaudio ?
Sometimes, in fact quite frequently, when I boot up my system, PulseAudio does not work. ('Connection Refused'). If I log out of my normal account, log in as root, log out of root, and log back in to my normal account, this seems to reset Pulse Audio and it works again. Seems like a security glitch, but I can't be sure.
I read about PulseAudio and thought it might be nice to try (especially the way you could individually control the volume of all applications seems nice), so I installed it and it worked fine.
I rebooted, and now it doesn't work again. Before, when I opened pavucontrol and went to the "Output Devices" tab, it showed the actual output sevices I have. Now it only lists one called "dummy output".
So what's the problem? Also, can I start it before X11 (I guess that putting "pulseaudio --start" in ~/.bash_profile should do it)?
I have some very deep-rooted problems in my system as a result of trying to get pSX, pulseaudio, and flash to all work in harmony after my update from 10.04 to 10.10. I've written about it in other threads, but they never seem to come to conclusion, and the solutions suggested only make things worse.
I'd like to keep my current data while setting sound, flash, and boot options back to the system default for 10.10. In other words, a reinstall without a format.
Is there a way to accomplish this? I have a lot of stuff I really don't want to lose and no way to back it all up.
I removed pulseaudio save for the libs, and now I can't lock down my desktop with ctrl+alt+l anymore. I can still lock the system with the menu (System > Lock Screen), but it's kind of annoying. Removing pulseaudio has cleared up all of my mplayer stutter issues, but I would like to be able to use the keyboard shortcut keys. Here's the command I used to strip out pulseaudio:
I`ve problem with my microphone on fedora 14 with Gnome 2. When i try to use alsamixer command there everything is ok. I tried pulseaudio and HDA nvidia sound cards, but microphone don`t work. How to fix this problem?
first off, I wanna say that Fedora 12 really impresses me. I am a longtime Ubuntu User and Fedora really suprised me especially in terms of speed. Unfortunately my sound is not working. I had this problem a long time in Ubuntu, too. Then I discovered that I only had to switch off Exchange Front/ Surround in the alsamixer and everything worked fine. However, with the arrival of PulseAudio I don't get any sound from my speakers.
I went through some Guides but nothing seems to work. When I play an audio file I can see the amplitude going up and down in the Volume Meter of PulseAudio. So I think PulseAudio is working on the application side.
with Code: alsamixer -c 0 I can see that everything is set as it was in the passed for my soundcard. Exchange Front / Surround is switched off. Code: cat /proc/asound/
[Code]...
I hope you have any suggestions. Usually I look through the net till I find a solution. This time, however, I don't really know what to search for, since I tried everything I found except getting rid of PulseAudio which is my last option.
I cannot get sound to work with my new installed Opensuse 11.2. If I check yast (sound card configuration), I can play a nice testsound. However, Kde (I am using kde 4.4.2) does not issue any sound at all.
In the 11.4 product highlights it says: "...availability of PulseAudio in a Plasma Desktop session by default", but what does this mean to the average KDE user? The SUSE-Wiki has no entry for pulse nor pulseaudio.
While basic sound works fine out of the box for me, I am confused between Phonon, KMix and PulseAudio. Each does something else:KMix is now entirely useless, right? Phonon only allows me to select which sound device is used for which input. PulseAudio allows me to select indivdual volume per Application through pavucontrol, but it does not replace phonon nor Kmix There is no KDE Plasmoid/Systray thingy for configuring volume with PulseAudio? Is there no single application/plasmoid to handle all sound options in one go?
I think it is pretty bad that pavucontrol is not even installed for KDE-users by default, and it took me a while to figure it out. Or is there another application that a KDE-user should rather use by default?
I mean things work fine, such as using Phonon to automatically choose my Bluetooth headset for voice communication while music and games at the same time automatically use the speakers for output. Changing volume with pavucontrol works, but why do I need separate things for that?
This is not meant as a rant! I am just wondering whether the PulseAudio/KDE-Integration is just work-in-progress, or whether I am missing something important here entirely. After all, 11.4 and KDE 4.6 looks pretty polished to me overall, and so the audio situation sticks out as odd to me.
I tried Disabling PulseAudio via Yast (didnot remove the packages), and the channels came back in KMix, but then the native apps of KDE, if I can call them so, like Kaffeine started playing 5.1 movie tracks in stereo! In VLC at the same time I had to choose manually 5.1, but then stereo tracks didn't played. Enabled PulseAudio back. Selected Analog Surround 5.1 Output (Phonon->Speaker Setup), backend is GStreamer. Installed the VLC Pulse support package (vlc-aout-pulse). Selected Pulse as the Output Module in VLC. Now Kaffeine plays 5.1 and stereo tracks properly as well as VLC now Automatically switches to 5.1 playback if the track in movie is 5.1 and also plays stereo tracks properly. I guess with PulseAudio we will need all audio/video apps to have some kind of PulseAudio support (built-in/plug-in) or else we will face probs. Now I need them all channels (master, front, centre, rear and LFE). Especially I need LFE (bass) which is too high by default, and I run alsamixer to minimise LFE channel, but as soon as I play a movie or music it is back to 100% automatically.
When I first installed 11.4 I was unable to access the usb webcam mic on Skype. I use Tumbleweed and after a couple of KDE updates I was able to access the webcam mic in Skype. I did this by setting the webcam mic as the first device to use in either pavucontrol or systemsettings>multimedia>phonon>audio capture. There have been many KDE updates since then and now I am back to having no mic in Skype. I will set my webcam mic as described above but pavucontrol will no longer save my changes. It is permanently stuck using internal audio analog stereo as the first capture device. My webcam mic is listed but it is four down on the list and Skype will not access it.
This tutorial is meant for Ubuntu 9.10 Karmic Koala, but it might work in earlier or later versions as well. I wrote this tutorial mostly because it took me a full day of work using lots of help from people on #mpd and #pulseaudio from the FreeNode IRC server.The goal is to get the MPD daemon working using PulseAudio, but without it being dependent on the X server or a session. To do that we must configure PulseAudio to run in system-wide daemon mode (which is not recommended by the developers, but in this case we do not have a choice). This means it will be using the /etc/pulse/system.pa config file instead of the usual /etc/pulse/default.pa. We must also make sure the appropriate user/group permissions are set, or PulseAudio will be rejecting the connections.The result will be an interrupt-less music environment, not dependent on the X server. Meaning we can for example log out and log in without the music having to stop for even a second. Switching TTYs (Ctrl+Alt+Fx) will also keep the music playing (not possible by default). All that and PulseAudio will still be able to detect and configure all your devices automatically.
Instructions: Make sure you add your username to the following system groups: pulse, pulse-access and audio.Do that by going to System --> Administration --> Users and Groups.Click the unlock button (the one with a picture of some keys), then click Manage Groups. In the list of groups that pops up, for each of the previously mentioned groups click "Properties" and select all the users that you want to have this functionality.
I seem to be having a problem with my sound. Every time I start my computer, I hear the sound played at the login screen and the sound played when I login. Right then, every time, the sound cracks up and stops before it finishes. Running "ubuntu-bug audio" shows that ALSA works fine but pulseaudio does not. For reference, "pacmd list" says that there are 0 sinks, 0 sources and 0 caches.
Edit: Solved by a really stupid mistake: loose 3.5mm audio cable. Don't do that. your sound and you're on a desktop computer, go, right now, and check to make sure that you haven't made the same mistake as me.
Woke up this morning and updated my main myth machine, and now mythfrontend won't start. I get this message:
Code: 2009-05-12 07:57:50.003 Closing DB connection named 'DBManager0' 2009-05-12 07:57:50.006 Primary screen 0. 2009-05-12 07:57:50.008 Connected to database 'mythconverg' at host: ***.***.*.*** 2009-05-12 07:57:50.010 Using screen 0, 1680x1050 at 0,0 2009-05-12 07:57:50.069 AudioPulseUtil, Error: Failure to suspend: Invalid argument 2009-05-12 07:57:50.070 AudioPulseUtil, Error: Failure to suspend: Invalid argument 2009-05-12 07:57:50.070 ERROR: ***Pulse Audio is running!!!!*** 2009-05-12 07:57:50.070 ERROR: But MythTV was not able to suspend it. EXITING!
So, I googled about, and found this thread on a mythtv dev mailing list: No Start with Pulse Audio (Changeset 20310) | MythTV | Dev Apparently, the new mythtv .21-fixes is incorporating the .22 pulseaudio check. Myth checks for pulse and exits if it can't kill it. I had sound issues with 11.1 before, and tried to remove pulseaudio but created bigger headaches for myself by doing so. Interestingly, if you log into a mythtv session from the xdm, mythfrontend will run. So, pulse isn't loaded at the session level. But, I'd like some other workaround that allows me my normal desktop at the same time!!
