Debian :: Laptop Fan Running Loud After Kernel Upgrade?

Mar 16, 2010

I'm running Debian Squeeze and last night i upgraded to the latest kernel release. Rebooted and noticed that as the system temp rises the fan runs louder(as expected)t unlike before, it no longer gets quieter as the temp drops again. I didn't really think the OS managed that so bit confused why it is happening.I booted into Windows 7 and with the exact same temps the fan drops back down to a quieter state

View 9 Replies


ADVERTISEMENT

Software :: Upgrade A Laptop Running Ubuntu 10.04 To 11.04?

May 23, 2011

upgrade a laptop running Ubuntu 10.04 to 11.04.

Since wifi is the only connection to the Net, I'll have to burn a CD/DVD to perform the upgrade.

how well that works, traps to pay attention to, tips to make it run smoothly, etc.

View 7 Replies View Related

OpenSUSE Multimedia :: HP Dv7 Laptop - Loud "BEEP" PC Speaker?

May 19, 2009

I've got a laptop running OpenSuse 11.1/KDE 4.2. I've got sound working just fine (can play music, etc), but whenever there's a system alert (like when I get a new email in Thunderbird), I hear a loud BEEP, as if it's coming from the PC speaker.

View 6 Replies View Related

Debian :: Upgrade Debian 3 Kernel 2.4.18 To Kernel 2.6 Or Bigmem-kernel?

Nov 11, 2010

We have a Dell 1850 with Debian with 2.4.18 kernel running some critical applications, now the issue is we need to upgrade the memory to 8 GB but the memory is detected by the bios itself, Operating system is not able to detect it, it is showing 3096MB of memory,

After a lot of googling and the artical in linux.com/archive/articles/119287 :: Got more than a gig of RAM and 32-bit Linux? Here's how to use it i came to know the solution i.e

1)I need to install the Bigmem-kernel to detect the ram more than 4Gb,

2) or change some kernel parameters in configuration file and rebuild the kernel

Is there any another solution for this to update operating system to detect the more RAM

View 1 Replies View Related

Debian :: How To Upgrade The Debian 3 Kernel 2.4.18 To Kernel 2.6 Or Bigmem-kernel

Nov 9, 2010

We have a Dell 1850 with Debian 3.0 (woody) with 2.4.18 kernel running some critical applications, now the issue is we need to upgrade the memory to 8 GB but the memory is detected by the bios itself, Operating system is not able to detect it, it is showing 3096MB of memory. i came to know the solution i.e I need to install the Bigmem-kernel to detect the ram more than 4Gb, Any another solution for this to update operating system to detect the more RAM.

View 6 Replies View Related

Debian Installation :: Laptop Unbootable After Running Installer

Apr 3, 2016

I was running Windows 10 on MSI GT70 2OD-064US hoped to dual boot first had three primary partitions shrunk largest one and ran debian-8.3.0-amd64-netinst.iso chose guided install with remaining free space, didn't force UEFI asked if I wanted to install GRUB after finding Windows Vista (loader) I went ahead and installed. Couldn't boot afterwards with dark screen saying no install media, changed BIOS to legacy mode and got grub prompt followed tutorial and entered these commands:

grub> set root=(hd0,5)
grub> linux /vmlinuz root=/dev/sda5
grub> initrd /initrd.img
grub> boot

This caused it to boot without GUI I ran grub-update and restarted back at grub> again. How to get debian to boot or even windows 10 again?

View 5 Replies View Related

Debian Multimedia :: Running Squeeze On Laptop Speakers Do Not Work?

Mar 27, 2011

I'm running Debian Squeeze on my laptop my laptop speakers do not work but when i plug in something into the headphone jack I then have sound (to the speakers plugged into my headphone jack).

View 7 Replies View Related

Debian :: Suspend On Console Without The X Server Running The Laptop Wakes Up To A Blank Screen?

Feb 26, 2011

I'm using a dell latitude d630 with an nvidia quadro 135M card. I'm able to suspend without any problems while running the X server. If I try to suspend on console without the X server running, the laptop wakes up to a blank screen. The screen remains blank and my only resort is to type sudo halt (with the screen off).I'm using the proprietary nvidia driver with the nvidia-kernel package on testing.

View 4 Replies View Related

Debian :: Upgrade Debian Stable Kernel From Squeeze Version?

May 26, 2010

I've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?

View 12 Replies View Related

Debian Hardware :: Constant Loud Crackling Noise From Yoga 2 Pro Speakers

Aug 27, 2015

This is a weird and persistent bug that I've been having. It's persisted across multiple distros (Arch and Debian) and is currently making my computer only usable without sound. I'm beginning to think it's the hardware.

Anyway, the hardware is a Lenovo Yoga 2 Pro laptop. I'm currently running Debian 8. The crackling noise begins shortly after I log in - it happens regardless of whether the audio is muted, or whether anything is currently playing. It's a very, very loud noise - on the level of a vacuum cleaner or similar (maybe, these things are hard to estimate). It sounds sort of like a fast series of crackling pops. If I put the machine to sleep with the power button the crackling will go away for a little bit after I resume - I haven't timed it or anything but I imagine that it takes 30 seconds to start up again (after the computer has woken from sleep).

I can completely eliminate the problem by doing the following:

Code: Select allblacklist snd_hda_codec_hdmi
blacklist snd_hda_intel
blacklist soundcore
blacklist snd_hda_codec_realtek
blacklist snd_hda_codec_generic

[Code] ....

But obviously, this makes the sound on the laptop not work at all. I've been listening to music with my phone, which is an ok workaround, but I'm a programmer and I'd like to be able to watch talks on youtube and so on.

lspci:
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)

[Code] ....

It started happening on Arch after a pretty standard install (i3wm with Xorg, browser, terminal emulator, etc) and I suspected that I had misconfigured something, so I installed Debian - I know other Debian users with this laptop who have not had this issue, and so I figured the default settings would treat me better. No such luck - it started happening again on the clean Debian install. One detail - both installs (the Arch install and the Debian one) use full disk encryption (lvm on LUKS) but I can't think of how that would affect it.

My only thought is that it's some weird power saving mode issue - the soundcard isn't used for a bit, so it cycles to a lower power state, and the bad thing happens.

View 4 Replies View Related

Debian Configuration :: Sid: Laptop Keyboard + Touchpad Not Working After Upgrade?

Apr 13, 2011

on my netbook I have a Debian unstable/sid system. A few days ago I did an apt-get (dist-)upgrade which I think also updated the X-Server. Since then my netbooks keyboard and touchpad are not working as soon as the desktop is started (I think gdm).
The Keyboard works during the Grub selection and also in recovery mode (Root Terminal), so I'm sure its not a hardware problem. Could it be that the X-Server unloads the kernel modules for those two devices?Also if I plug in a USB keyboard or mouce they are working.

View 3 Replies View Related

Debian :: Warning On Running Aptitude Upgrade

Jun 21, 2010

On running aptitude update and then aptitude upgrade following warning notedfollowing packages have been kept back:

[code]...

View 7 Replies View Related

Debian :: Squeeze: Errors Running Upgrade

Nov 20, 2010

I've just tried running an upgrade and I'm getting lots of errors. Anyone having the same problem or know a fix/workaround

View 3 Replies View Related

Debian :: Gdm Won't Come Up After Kernel Upgrade?

Aug 19, 2010

I'm running Lenny with the default kernel 2.6.26. I recently got a wireless card supported by the ath9k driver, so I followed the instructions on this site:http://wiki.debian.org/ath9kwhich had me install a 2.6.32 kernel image from lenny-backports. Everything installed fine without errors, but when I rebooted after the install, after the kernel messages scrolled by and the screen would normally switch to the gdm login screen, all I got was a blank screen with some distorted squares. I used Ctrl-Alt-F1 to switched to a shell and everything looked fine, but when I Ctrl-Alt-F7ed back to X, I got another black screen with distorted images. Any idea what could have caused this from the kernel upgrade, and what I can do?Edit:Here is the end of my /var/log/Xorg.0.log after booting:

(EE) fglrx(0): PPLIB: PPLIB is not initialized!.
(EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
(EE) fglrx(0): ulEventType = 0000000c, ulEventData = 00000001

[code]....

View 14 Replies View Related

Debian Configuration :: Modules Get Mismatched With The Running Kernel Version?

Sep 30, 2010

is there a common reason why modules get mismatched with the running kernel version?why do I always get that uneasy feeling like I'm headed in the wrong direction?

View 4 Replies View Related

Debian Configuration :: Kernel Upgrade 2.6 -> 3.16

Sep 24, 2015

I have a MyBookLive where i installed a Debian 2.6 kernel. The system is running fine so far. Because of an error message when apt-get upgrade (udev) i tried to upgrade to 3.16. Here's what i did:

- apt-get install linux-image-xx
- apt-get install linux-source-xx
- extract the source
- copied the old .config from running 2.6 kernel over to the 3.16 directory
- make oldconfig
- make uImage
- make modules
- make modules_install
- copied uImage to /boot

No error messages because its a headless device - its just not booting up.

View 2 Replies View Related

Debian :: No Log In Screen And GUI After Kernel 2.6.32 Upgrade?

Sep 27, 2010

Upgraded Debian Lenny kernel from 2.6.26 to 2.6.32 along with Firmware to make my new wireless Linksys WMP600N card with ralink rt2860 chip on it work. I followed directions exctly from [URL]. I answed "YES" to all button options as there were statements threats there would be problems if i did not answer "yes". Eveything seemed to go OK. Only thing alarming during procedure was a statement " Config files still contain depreciated device names. The following configuration files still use some device names that may change when using new kernel: Etc/fstab:/dev scdo. I figure this file easely editable later so I did not worry.

Pleaseantly greated with new kernel 2.6.32 to boot but it fails to get to the log in screen to select GUI. I have previously been using Gnome and KDE3.5 back and forth.

I get the following mesages that I somewhat abriviated

Failure to start X server, Likely it is not set up corectly. View X server output? "yes" reports x.org.x server 1.4.2..........build OS debianlenny.... Check http:wiki.x.org to make sure you have latest version. Modual present The x server is now disabled.

I then booted old kernel and updated xorg with synaptic, some 52 packages and retried booting the new kernel with same results.

I have navigated to the /var/init.d directory and tried starting both Gnome and KDE by typing "kdm start" and "gdm start"with similar results. What have I messed up?

View 8 Replies View Related

General :: Debian 5.04 - How To Upgrade Kernel

Jun 2, 2010

I have a site to download a debian5.04, install the version found in the kernel is 2.6.26-2-686, and I ask where another higher version of the kernel of debian download

View 4 Replies View Related

Debian :: Aptitude Upgrade Following Warning Noted On Running Update

Jun 21, 2010

Debian 5.0 32bit On running aptitude update and then aptitude upgrade following warning noted

[code]...

View 4 Replies View Related

Debian :: 5.04 - Adding Repos For Kernel Upgrade?

May 2, 2010

What repos do I need to add to my list to be able to aptitude install a kernel newer that 2.6.28-X? I'd Prefer the latest 2.6.33-2. I'm running deb 5.04 on powerpc architecture with 2.6.26.

View 5 Replies View Related

Debian :: Kernel And XServer Upgrade Options ?

Dec 5, 2010

I'm just wondering what the options are if one wants to try a 'newer' kernel and/or XServer version.

Either on an installed system or virtual machine (for e.g., Squeeze in VirtualBox).

On an installed system, on Debian Sqeeze (or Testing), if one wants to upgrade to 2.6.36 kernel and/or XServer 1.9, what are the options? I noticed that 1.9 is available in experimental so one has to enable and load the experimental package repository?

As for the kernel, I guess there's a few options? One includes installing the liquorix kernel? Best choice/alternative is compiling?

View 10 Replies View Related

Debian Configuration :: Kernel Panic After Upgrade

Nov 2, 2015

I have a system that was upgraded from Debian 7 to 8. Unfortunately it is not able to boot from the new kernel 3.16. Only the old 3.2 kernel is able to boot. I could transfer a backup, install it in Virtualbox, redo the upgrade and I can reproduce the error..The last error before "panic" is this line

Code: Select all 59.073579] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
Loading, please wait...
[   59.226154] systemd-udevd[53]: starting version 215
[   59.326564] random: systemd-udevd urandom read with 4 bits of entropy available
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... /init: .: line 210: can't open '/scripts/init-premount/ORDER'
[   59.552148] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200

The directory is indeed empty. I have reinstalled

Code: Select allapt-get install -reinstall initramfs-tools

and rerun initramfs

Code: Select allupdate-initramfs -c -u

View 5 Replies View Related

Debian :: Squeeze Upgrade Causes Kernel Mess?

Feb 13, 2011

Finally ran the upgrade from lenny to squeeze and ran into a few issues. I have to admit this is the first dist-upgrade I've ever had go this badly (kernel issues, xorg issues, mysql transition problems, mythtv... Yikes!).Anyway, the first problem I'm trying to fix is getting dpkg to like the new squeeze kernel. Here's the errors

Code:
Errors were encountered while processing:
linux-image-2.6.32-5-686

[code]....

View 9 Replies View Related

Debian :: Squeeze Kernel Upgrade Broke Suspend To Ram

Dec 12, 2014

Yesterday, I ran a security update that upgraded my Squeeze kernel from 2.6.32-48squeeze8 to 2.6.32-48squeeze9.

Ever since then, my suspend to ram (STR) function is broken.

The machine will suspend normally, but will not resume. When I try to awaken the machine, I can hear the fan in the tower start up (the subject machine is a desktop computer, please see below for specifics), but the machine seems to be otherwise dead (e.g. the monitor stays blank, pressing the "caps lock" key on my keyboard does not activate said keyboard's "caps lock" led, Ctrl-Alt-F[x] has no effect, etc). My only recourse at that point is a hardware reset (ouch!).

I tried running Code: Select allpm-suspend from a terminal, with no joy. Same result running Code: Select allecho -n "mem" > /sys/power/state from a terminal.

I checked the /var/log/pm-suspend.log file and noticed that each Code: Select all...performing suspend line used to (before said kernel upgrade) be directly followed by a Code: Select all...Awake. line, but, now, all said Code: Select all...performing suspend lines are followed by an Code: Select allInitial commandline parameters... line.

Before this, STR has worked well ever since I first loaded Squeeze on this machine back in 2012.

Code: Select allSqueeze 6.0.10; 2.6.32-5-amd64

Intel i7-980 Gulftown CPU
Asus P6X58D Premium Motherboard
EVGA GeForce GTS-450 Graphics Card
G.SKILL Ripjaw DDR3-1600, PC3-12800, 1.5v RAM (6x4GB sticks, 24GB total)
Crucial RealSSD C300 128GB SSD
Western Digital Caviar Black 1TB HDD
Corsair HX850 PSU

[CODE]

View 14 Replies View Related

Debian :: Volume Group Not Found After Kernel Upgrade

Aug 7, 2015

This is a problem about linux-kernel-3.16-0-4-amd64 and LVM, I guess. I decided to write this here in case other users who installed their debian system with encryption enabled experience this problem with a recent kernel upgrade.

I use debian jessie. Today I gave the command:

Code: Select allapt-get upgrade

There was a linux-kernel upgrade to 3.16-0-4-amd64 among other packages to be upgraded.

After this upgrade my computer cannot boot anymore.

I get following error:

Code: Select allVolume group "ert-debian-vg" not found.
Skipping volume group "ert-debian-vg"
Unable to find LVM "volume ert-debian-vg/root"
Volume group "ert-debian-vg" not found
Skipping volume group "ert-debian-vg"
Unable to find LVM "volume ert-debian-vg/swap_1"
Please unlock disk sd3_crypt:

And it does not accept my password.

I used rescue environment on debian jessie netinst iso and decrypted the partition and took a backup of my /home. Now I have not much to lose if I reinstall my system but I still want to fix this problem if possible.

I have reinstalled the kernel using debian jessie netinst rescue iso but nothing changed.

I have Timeshift snapshots located at /home/Timeshift but timeshift --rescue command cannot find a backup device, it sees the device as crypted. If I could restore a snapshot it would be very easy to go back in time and get rid of this problem. It would not be a real solution, however.

There is not any old kernel option in GRUB menu. So removing the latest one does not seem as an option.

View 4 Replies View Related

Debian Configuration :: Graphic Slow After Kernel Upgrade From 3.16 To 4.1

Sep 24, 2015

Intel Core i7-5500U with Intel HD Graphics.So I updated to the backports kernel and backports intel xorg drivers and I have the weirdest thing.Everything is stuttery even cinnamon desktop effects are no longer smooth. If I boot back to 3.16, everything is butter (except the screen corruption). Even my favorite wine game dropped 25% in fps.

I remember that on windows, if the cpu is too slow (pstate_min_speed), graphics is also stuttery. However, increasing /sys/devices/system/cpu /intel_ pstate/min_perf_pct even to 100% didn't do the trick. I suspect, that this measure is causing it: URL....

how to increase the performance again? I just found out, after running glxgears (with about 40 fps), that xrandr shows an available framerate of 40fps

xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 293mm x 165mm
1920x1080 60.00*+ 59.93 40.00

I guess that's what makes it feel slow. Do you know how to get that back up to 60 (fixed)? It seems like the screen refresh rate set in xrandr has no effect on the problem. When I boot, glxgears runs with 60 fps and everything is fine. After a while, it drops to 40 and the whole desktop keeps stuttering. if I change the resolution with xrandr and then change it back, it goes to 60 again for a while

LVDS_DOWNCLOCK is disabled
Code: Select allsystool -m i915 -av
Module = "i915"

  Attributes:
    coresize            = "1028096"
    initsize            = "0"
    initstate           = "live"
    refcnt              = "5"
    taint               = ""
    uevent              = <store method only>

[code]...

View 5 Replies View Related

Debian Configuration :: X No Longer Starts After Kernel Upgrade / Fix It?

Jan 31, 2010

I have a problem. I'm using the latest Debian stable, Lenny. I am trying to get my usb wifi card working.
The Debian wiki advised me to upgrade my kernel to 2.6.30 using backports, because the drivers for my wifi chip are supposedly in the newer kernel.

So thats what I did. The install went fine. However, after rebooting the computer hangs when it is starting gdm. Only the desktop background appears with some fuzzy stripe over it, the mouse doesn't respond. Pressing ctrl+alt+f1 does nothing. I can only restart with ctrl+alt+del.

I can still use the computer with the old kernel. No problems there. I tryed disabling GDM and rebooting again with the new kernel. It boots up and works fine on command line. However when I type startx it hangs, just like before.

I'm not an expert, but I'm suspecting there might be problems with the graphic drivers in the new kernel.
When I installed lenny at first, X started fine. However 3d acceleration was not functioning. I got help from IRC, I had to install some package to enable direct rendering. Don't remember which one anymore.

Here's what lspci gives for VGA:
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS

View 1 Replies View Related

Debian :: Synaptic Will Not Load The 5 Binary CD's After Kernel Upgrade

Oct 21, 2010

Af few isssues arised after nessisary kernel upgrad to 2.6.32 bpo.5-686 to allow new wireless card to work. Synaptic will not allow the 5 install CD's to load when I do "reload" It reports

[Code]....

View 5 Replies View Related

Debian Installation :: Upgrade / System Broken After Moving To 3.16 Kernel

Apr 28, 2015

I got a rather big problem since an attempt to upgrade.My debian version is 8.0.I upgraded when apt proposed the change. I did that in two steps, with apt-get upgrade and then apt-get dist-upgrade, with the installation of a new kernel. I moved from 3.2.0-4-686-pae to 3.16.0-4-686-pae.Since the upgrade, I can't boot my system any longer.During the boot sequence, this message appears with a countdown (it's copied by hand) :

Code: Select all(1 of 4) a start job is running for dev-disk-byX2du

At the end of the countdown, the boot sequence starts again, and ends up on an invite to log in as root in rescue mode. I can't connect (maybe due to some azerty/qwerty issue, I got a French keyboard. I tried to type in "qwerty mode", with no success (the password is not prompted)).I can connect with the 3.2 kernel however, selecting it form the grub interface. I can't log in in rescue mode either, but with this kernel the boot sequence goes on and I can log as a regular user or as root, at the end of the boot sequence. There is no X, but the system seems to work.What could I do to make the system boot properly with the new kernel, or to go back to the 3.2 version ?

View 14 Replies View Related

Debian Installation :: Kernel Upgrade Required Due To Graphics Card

Jun 7, 2015

I am tryint to install Debian Jessie on my desktop.My system configuration are:

Processor:- i7 4790k
motherboard:- Z97X-UD3H-BK-CF
ram:- 4GB DDR3
graphics card:- AMD radeon R9 200 series.

I am trying to dual boot here (Debian and Windows 7).I am trying to setup server here (trying my hands on first time.)I am getting the following error on the screen when i select to boot from Debian (windows boots up normally when selected in grub) I have attached the image,it states:-Radeon kernel modesetting for r600 or later requires firmware-linux-nonfree

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved