upstart clearly boost startup time (tested on other distro). How to force upstart during netinstall of wheezy ? (I have bad past experience of switching from sysvinit to upstart by upgrade, and would like to avoid this way).
View 14 RepliesI had read that squeeze was to use upstart instead of sysvinit. Anyway, in playing with splashy, I decided to install upstart to see if it would work, which it does just fine. When I check for updates in synaptic, it always wants to remove upstart in favour of sysvinit. I wouldn't have a problem with that except, with sysvinit, squeeze no longer shuts down or starts up.
View 3 Replies View RelatedI'm running the new OpenSuse 11.3 64-bit. how to switch from SysVinit to Upstart?
View 1 Replies View RelatedI've proven that the the D in systemD is for DISASTER.At first, I thought that the dozens of problems I had with startup, shutdown, and services, was due to my upgrading from Fedora 14. But now that I've tried a fresh install, I have a new set of different problems. Basically DBUS broke after I installed Samba, and no combo of reinstalling either of them fixed anything. So here goes my third Fedora 15 install.
During a fresh install, can I de-select systemd and select upstart and sysv instead? systemd is not visible in the GUI installer. Do I need some Kickstart hack or something? Is this possible at all?
it's the installation media or the ISO is broken because i have reburned / redownloaded the fedora14 multiple times with the same result. I even tried burning the disc on a different computer just to make sure the burner is still working. This is the error i am getting when the "Starting installation Process" dialog displayed.
"The file upstart-sysvint.0.65.9.fc14.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source" I remember fedora 13 and below i have to use nousb command or something similar to get fedora installed properly but not for fedora 14. It just pops up with the message above.
I have installed Debian maybe 30 times over the years since about 2003, stable, testing and Sid on two different desktops and two different laptops. The only problem I have ever had is sometimes with a flaky daily build. It is one of my favorite distros.
BUT, I am totally frustrated is trying to install to a USB. I have followed the manual step by step about 6 times in the past two weeks. The result is always the same. The installation fails to find an installation iso image. Yes, I know the iso image and the hd-media vmlinuz and initrd.gz files are supposed to be the same version.
File: debian-testing-i386-netinst.iso from: [url]
Files: vmlinuz and initrd.gz from: [url]
The USB boots to a Language selection screen and proceeds through the Keyboard selection screen with no problems.
The next step which searches for an installation iso image fails.
Skipping that step and trying to load installer components from iso image also fails.
Searching the entire PC for an installation iso image also fails. (I even copied the netinst iso image to the HD root directory.)
I have and old PC and for last years i had Debian Lenny on that and it was working great but after the Squeeze release, i downloaded the first CD image and did a fresh installation but after this it boots up with no problem (i must say since in Squeeze installation the option of creating a floppy diskette was not working properly i use SuperGrubDisk2 to boot the Debian), but few seconds after logging in, the system hangs (or maybe only the X11 since i use a historic nVidia TNT2 Riva graphic card!).
View 3 Replies View RelatedI haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies View RelatedI recently bought a new Samsung netbook N310 and want to install dual-boot Debian lenny along with windows xp home edition. My CPU is like this: Intel Atom CPU N270 1.6GHz which architectures and kernels I should download from the cd installation? there are so many:alpha, amd64, armel, hppa, i386, ia64, mips, mipsel, powerpc, s390, and sparc.
View 4 Replies View Relatedexplain the following issue I have with Debian IA 64:I tried on a PC (Mobo Gigabyte G41M-ES2H, core 2 duo, 4 GB RAM DDR2) the live CD of Debian Lenny IA64 and everything worked just fine, which was a very good thing because none of all other major ia64/i386 distros of Linux (Mandrake, ubuntu, fedora) did so. In a nutshell it seems that the IGP G41 chipset is the cause of these setup failure (Everything is OK when using a PCI-e graphic card that I need in another computer)rd as someone (viewtopic.php?=17&t=49186&p=282839&hilit=G41M+ES2H#p282839) successfully installed Lenny on a very similar mobo. To go to the point what I do not understand is when I launch the iso Cd to now install the same version of Debian, everything freezes at the very beginning of the boot and the screen goes blank.
View 4 Replies View RelatedI've finished the installation of Debian Squeeze using Installer loader from Windows. But the Installer menu is still appear on Windows Boot Manager.
I've try to uninstall the "Installer Loader" from Windows and I got an error message about BCDEDIT (if I'm not wrong), during uninstallation process.
I ignore it, and continue the uninstallation process until complete. But, After I reboot my computer, the Installer menu is still appear on Windows Boot Manager.
I'm using Windows Vista Business SP2.
My laptop is Toshiba Portege 2000. Every time after I installed new ubuntu release, I have to replace the xorg.conf to fix the resolution problem b/c I got 800 x 600 screen only. However, after the 10.04 installation. I only got 1/2 of the screen of resolution. I cannot even see most of my terminal screen.
View 2 Replies View RelatedI am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies View RelatedI am trying to get Debian 6 to work on an hp Z400 - the problem is that it came with a NVIDIA Quadro NVS 295 graphics card; there may be a driver for Linux, but it doesn't matter, because GRUB insists on switching to some sort of graphics mode and the screen just blanks and switches itself off. Is there any way to make sure during installation that GRUB gets configured to stay in character mode only?
View 6 Replies View RelatedAfter a fresh install of 7.7.0 (amd64), I'm unable to boot into Debian. I get the following error constantly when booting in recovery mode:
(snip) [drm] nouveau (snip) PMC - unhandled INTR 0x44000000
A bit of Googling seems to indicate that this is due to my video card (Geforce GTX 750Ti). Unfortunately, my motherboard doesn't have any monitor ports, so I'm forced to use a video card in order to use a monitor. Something I didn't foresee being an issue, but what can you do. How should I resolve this? Is there an ISO that has the (presumably non-free) drivers included? A way I can add the drivers during boot (I am able to boot into my Windows partition by changing the boot order, don't know if I can do anything useful from here)? Or do I have to do something crazy like buy/borrow an older video card just so I can properly boot into Debian, and then install the drivers?
I've got a secondary problem: GRUB has my Debian install as the only option, even though I had Windows 8.1 installed first. I don't know if this is related to the problem above, or it's a known problem with newer versions of Debian and/or Windows (and I have to update the menu.lst or whatever myself), or if it's due to the way I set up partitions. My current setup is:
SSD:
- Windows boot partition
- Windows main partition
- Debian / partition
- Debian swap partition
HDD:
- Debian EFI partition
- Debian /home partition
- Unallocated space (will eventually be a NTFS partition for shared storage)
This is the first time I'm using a motherboard with EFI/UEFI. It's also the first time I have an OS taking up partitions on multiple physical devices. I don't know if either is the cause of GRUB not detecting Windows.
I have downloaded the Wheezy DVD 1 and started the istallation process. The installation time is strangely very short in respect to the Squeeze release, anyway
The GRUB installation step fails. I terminated the installation without a bootloader and rebooted from DVD with the rescue boot option.
Now I asked for a console to try to manually install the bootloader but the following command:
# grub-install /dev/sda1
[where sda1 is my root partition]
gets the following message:
/bin/sh: grub-install: not found
What can I do?
I'm creating a new debian virtual machine. As virtual disks are free, I want to use tree for my new machine. The scheme will be like this:
sda -> /boot
sdb -> /root
sdc -> swap
Currently my new server pc (Mobo - ASRock H97M-ITX/AC) is not connecting to the network and it seems to be due to the network card alx drivers. I have downloaded the compat drivers and backports associated with the issue in other posts and on other forums but haven't been able to get it running.
When I install a usb drive of any type to try and transfer the drivers over I get the messages "443.057769 sd 7:0:0:0: [sdb] Assuming drive cache: write though" & "443.057769 sd 7:0:0:0: [sdb] No Caching mode page found".
I have been looking around these forums and google for the past week or so and have tried re-installing and alternative hardware etc. with no luck.
So I have installed Debian through debootstrap and it seemed to go off without a hitch, the problem came problem came about during the boot process. I am dual-booting with Arch and use Systemd-boot as my bootloader... it finds the kernal and initrd and starts to boot but I run into this problem where it gets to the options part for root and doesn't mount. have done this very same installation on virtualbox with ext4 filesystem and it worked without a hitch.. I know it has something to do with the btrfs subvolumes I'm so new to Debian I haven't made it past this installation process..
here is my lsblk
Code: Select all
sda 8:0 0 /My_Files
sdb 8:32 0 /home
sdc 8:48 0
[code]....
I have installed btrfs-tools and I don't know what the following means... It seems to do the first two fine, vmlinuz and initrd.img but it doesn't find my root because maybe it doesn't recognize the 'rootflags' tag? or Debian doesn't automatically deal with btrfs-subvolumes nicely?
Code:
Select allBegin: checking root file system . . . fsck from util-linux 2.25.2
/sbin/fsck.btrfs: BTRFS file system
mount: mounting PARTUUID=................................................................ on /root failed
Target filesystem doesn't have requested /sbin/init
I'm attempting to install Debian to an NVMe SSD (Samsung 950 Pro), however both Jessie and Stretch images fail to install grub.
Checking the syslog reveals the following error:
grub-probe: error: failed to get canonical path of /dev/nvme0n1p5
Further Information:
Fast-boot is disabled in the UEFI, and boot mode is set to UEFI only, no CSM. I do not see any option for 'Secure Boot' if it's relevant to the issue.Windows 10 has already been installed, which created several partitions. The ESP/EFI partition appears to be on nvme0n1p2I only created one partition for Debian - / on nvme0n1p5, no separate partitions for /boot, /home etc.
Trying to install squeeze again and everything has gone ok including network connection & partitioning & retrieved 916 packages from mirror.
But now installation has stopped completely at: Configuring ca-certificates
And will not proceed further.
Installing Debian on a new laptop and read that Debian-Installer (DI) can create an encrypted partition (/home) during installation.However, when I went through installation and started the manual partitioning (standard, non-lvm) , I am unable to locate the encryption option.
View 8 Replies View RelatedWhen you get to the package installation you get by default:
Desktop Environment
Standard System
Which i disable for my minimal installation.Out of curiosity, can somebody tell me what is installed with the Standard System?
I'm new here especially in Debian . A couple days ago i was try to install stable release of debian lenny. But it's unsuccessful because my network adapter isn't detected or debian can't find a correct driver for it.Is there any way to skip that kind of stuff? It's mean that because i'm not using the network adapter either ( I'm using broadband connection USB ). And the CD 1 is contained gnome already right?
View 14 Replies View RelatedI downloaded the 64bit net installer. I install just the standard, reboot and the machine hard locks on me. It appears to be locking up on Bluetooth.
View 2 Replies View RelatedIs there a way to get rid of the need to feed debian apt-get upgrade the original installation cd-rom? I'd like to have all on the hdd and point there in order to avoid having to take the cd-rom along.
View 7 Replies View RelatedInstalled the latest stable of version of debian off of the website (amd64) (DVD version)
When I installed no network card was detected so I just proceeded to install without the internet access.When it booted up I didn't have sound either.So... is there any way to get my internet and sound to work?I have an ASUS P5G41T Motherboard with Atheros Eithernet and Realtek HD sound.
I'm new to the Debian, but not to Linux. I've previously used Ubuntu for a few years, so I know something about how a successful installation should look like. I'm currently using Windows 7.
I downloaded the debian-6.0.3-amd64-gnome-netinst.iso from [URL] ...., and then made a USB pendrive using the Windows version of Unetbootin. The MD5 sum for the .iso-file was the correct one, b663727d7f5b572c329cea8e2ff5e29c.
I used the usual non-graphical setup, without any special options. The installation process went without hiccups until the "Starting up the partitioner" -screen freezes at "Scanning disks...". The bar stops at 50%. It never progresses any farther, even after an hour. It doesn't give any errors either. After I pressed Alt+F4, the last lines were:
Code: Select allpartman: No matching physical volumes found
partman: No volume groups found
partman: Reading all physical volumes. This may take a while...
partman-lvm: No volumegroups found
Exactly the same happens with firmware-6.0.3-amd64-netinst.iso too, or any of the live versions I tried. The result of graphical installation was also nothing. The USB pendrive created by LinuxLive USB Creator was nonoperative in exactly the same way.
The computer is brand new, without any previous OS installations. My desktop computer has the following parts:
CPU: AMD Phenom II X6 1055T, AM3, 2.8 GHz (HDT55TFBGRBOX)
Motherboard: Gigabyte GA-970A-UD3, AM3+, AMD 970, DDR3, ATX
Videocard: Gigabyte GT 430
Memory: Kingston 2x2 GB, DDR3 1066MHz, CL7 (KVR1066D3N7K2/4G)
Harddrive: Samsung Spinpoint F3 HD103SJ
Powersupply: OCZ 600W ModXstream, ATX 2.2, (OCZ600MXSP-EU)
I have just installed Lenny but I can not see any graphic Desktop. I got only a movil window with the message:Input not supported. Because of it I think the resolution my screen is not fixed right.I tried to re-configure with:# dpkg-reconfigure xserver-xorgbut I can not reconfigure the screen.
View 2 Replies View RelatedI went to the Squeeze download page I am assuming that "ia64" is the Intel 64bit version. Am I correct?Are there any 64bit issues not encountered in the 32bit version? I am asking beforehand so that I am aware of the extra work I will have to do to make it work
View 14 Replies View Related