Debian Hardware :: Connector Difference Between 3.5 And 5.25 Drives On Drive Select Line?
May 17, 2010
I am trying to read a 5 1/4 in. floppy disk using an Intel D865 PERL motherboard, at 3 GHz. Bios was set to read this floppy. The system Lenny 2.6.31 i386 can't detect the 5.25 drive. Drive select seems not to be responding on the 5.25 drive. When connecting a 3 1/2 in. drive to the same motherboard connector (after changing the BIOS setting appropriately), r/w is ok under both linux and XP. I have tried three floppy 5.25 drives and different cables. All known to be ok on another box. I have tried XP and another linux, Etch. I have installed the latest available Bios upgrade from Intel. Upgraded from 0061 to 0089 bios versions. Is this a possible connector difference between 3.5 and 5.25 drives on the drive select line? The cable drive end connectors are different between the two drives.
View 5 Replies
ADVERTISEMENT
Apr 6, 2016
I got assigned to a project, where the installation is done over ansible. As I'm new in linux, python, django, ansible I wanted to try this out on a empty linux debian.
Code: Select alluname -a
Linux DebianABC 3.16.0-4 amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29) x86 64 Gnu/Linux
When I now run my ansible playbook it tries to install mysql and suddenly I get an error:
Code: Select all:stderr: DEPRECATION: --allow-external has been deprecated and will be removed in the future. Due to changes in the repository protocol, it no longer has any effect.
DEPRECATION: --allow-unverified has been deprecated and will be removed in the future. Due to changes in the repository protocol, it no longer has any effect.
Could not find a version that satisfies the requirement mysql-connector-python==1.0.12 (from -r /home/abc/abcTest/requirements.pip (line 36)) (from versions: )
No matching distribution found for mysql-connector-python==1.0.12 (from -r /home/abc/abcTest/requirements.pip (line 36))
FATAL: all hosts have already failed -- aborting
So I checked the target machine and tried to run
pip install -vvv -r requirement.txt mysql-connector-python
As version 1.0.12 is an old version, I was searching and tried the following: [URL] ....
But also if I run the installation by direct download I have the same error message:
Code: Select allabc@DebianABC:/home/abc/abcTest$ pip install -r requirements.pip -vvv mysql-connector-python
Collecting http://cdn.mysql.com//Downloads/Connector-Python/mysql-connector-python-1.0.12.tar.gz (from -r requirements.pip (line 36))
Starting new HTTP connection (1): cdn.mysql.com
"GET //Downloads/Connector-Python/mysql-connector-python-1.0.12.tar.gz HTTP/1.1" 200 230923
[Code] ....
I was reading about the version requirements from PEP: [URL] .... but as the version looks ok, this should not be the problem.
View 0 Replies
View Related
May 9, 2010
upgraded from karmic through update managerANDnone of of my external drives cd drive or flash drives are picked upad to go back to karmic and will remain there for a whil
View 9 Replies
View Related
Nov 23, 2010
I was thinking as we have an option for invert selection , is there any option for invert deletion from command line. We can invert select and then pass the output to deletion, but i dont know how to invert select from the command line.
View 5 Replies
View Related
Jan 22, 2010
This is a Fix message - it is a type of protocol for transmitting financial dataeach number followed by a = sign is a tag - each tag means something. some tage are moe important than other.
8=FIX.4.1^9=0235^35=D^34=10^43=N^49=VENDOR^50=CUSTOME^ 56=BROKER^52=19980930- 09:25:58^1=XQCCFUND^11=10^21=1^55=EK^48=277461109^22= 1^54=1^38=10000^40=2^44=76.750000^59=0^10=165 18
[code]....
View 9 Replies
View Related
Jan 19, 2010
Is there are fundamental difference in using NFSv4 instead of NFS while mounting drives?What advantages NFSv4 has versus NFS mounting?
View 1 Replies
View Related
Feb 8, 2010
I want to select the fields which the 'top' command shows from the command-line. I can do that in the interactive mode when I press 'F', but I would love to do it via parameters (or with a configuration file, if it doesn't work otherwise).The fields I'd want to leave out are triggered by these letters: AHIOQTWMBackground:I installed the "compa" Gnome applet and want to always see what program currently uses up most ressources. For example, Pidgin sometimes starts using up 100% of 1 CPU and I have to kill it and start it again. I can already filter 1 or 2 programs from the 'top' command using the 'head' and 'tail' commands, but there are too many fields for my purposes by default. I could make a C program that filters those fields I need, but I think there must be a simpler solution.
View 2 Replies
View Related
Apr 19, 2010
1/ I haven't catch the difference between dwdiff, diff or dircomp If one wants to only output files (JPEG, doc, etc.), which have been created, absent or modified The command:
diff -r -q
works well, any advantage for another command? Subtilities between commands for issues like:
* identical content, but renamed files
* identical names & date & weight, but different content (virus)
2/ Is there a way to tell diff to store in a specific directory all missmatched files?
Something as
diff - r -q oldBackup actualData /media/sda1/discrepant
Where diff would store in media/sda1/discrepant all files which are new or modified after comparison between oldBackup and actualData
View 1 Replies
View Related
Jun 9, 2011
so I setup a raid ten system and I was wondering what that difference between the active and spare drives is ? if I have 4 active drives then 2 the two stripes are then mirrored right?
root@wolfden:~# cat /proc/mdstat
Personalities : [raid0] [raid10]
md1 : active raid10 sda2[0] sdd2[3] sdc2[2] sdb2[1]
[code]....
View 2 Replies
View Related
Mar 26, 2010
Example: In rc2.d I have S99test. In it: Code: #!/bin/sh mplayer -playlist "/music/Thom Yorke - The Eraser" Reboot; hear the loveliness; press pause (lirc setup)...still loveliness.
Login as root; "pkill mplay";hear nothing; "/etc/rc2.d/S99test"; more loveliness; press pause...silence! I know that i the former case, mplayer is assigned (for lack of a proper term) to a session, e.g. tty1. Not so in the latter. But why should a program like mplayer not receive (or ignore?) input from lircd, simply because it doesn't have a session? And how can I get mplayer (or any program run from boot scripts) to work with other programs (like lircd)?
View 1 Replies
View Related
Feb 18, 2010
so i have a few shell scripts that execute wonderfully when i type them at the command line but they fail when they are run from cron.
for example, if i run a script from command line that contains
Code:
shopt -s nullglob
to prevent problems with for f in *.mp4 type loops, it works fine from terminal command line but when called from cron, it gives an error->
Code:
/home/centralsqwall/Videos/videochecker.sh: 91: shopt: not found
a couple other random errors as well...
so there is some difference in the shell from cron and the terminal?
i'm running ubuntu 9.10, #!/bin/bash
what are the commands i should be using to echo my environment or simulate cron environment from the terminal?
View 3 Replies
View Related
Oct 15, 2010
I want to try installing from a USB drive. I can create a USB start up easy enough. The problem is when I go into my my laptops BIOS and boot order set up there is no option listed to select the USB in the boot order. The "closest" option is "Floppy Diskette" which of course I don't even have!
How to set the USB drive as the first boot option or might it not be possible on this machine?
View 5 Replies
View Related
May 25, 2010
I dont know what to do, since noone responded me, I think I need to do this. My problems are in my previous post, all I am asking for a little advice on how can I remove all that is in my PC throught the command line(I can't get further)
View 3 Replies
View Related
Dec 4, 2010
I'm not sure what to make of this. I have setup an Ubuntu 10.10 server with two software raids.md0 is a four disk raid5 - 3TBmd1 is a two disk mirror - 300GBI think I have a drive failing (and am going to replace it regardless, but I have to take an outage), what appears to happen is it comes on-line with one id (/dev/sda) then something happens AFTER the rebuild completes and the drive changes to another id (in this case /dev/sdh) and puts the array in a failed state.Is this some sort of protection mechanism to prevent degradation to the array? When setting this up, presumably before the disk started to fail, Ids seemed to jump from reboot to reboot and caused me all kinds of issues.Also, neither device appears to return info after the change.
Code:
bwoods@MediaServer:~$ cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
[code]....
View 2 Replies
View Related
Feb 25, 2010
so the safest way to go about this is to assume I know nothing. I mean, I have a rough Idea of what a kernel is, no idea what a shell is, etc. I do consider myself computer savvy, but know NOTHING about linux and thats why I'm Diving in, hopefully not too much, this is just to give you an idea of what we're working with here.
After several install attempts I kept getting a blank screen. Whether it be black,white, or the default gnome desktop (without any icons, and simple things like ctrl+alt+backspace just doesn't work, or anything else for that matter) I was ending up with a blank screen. Driver for moniter....maybe....but I did succesfully install it once, and it worked like a charm...shutdown properly, and the next day after work...Boom, same thing after startup.today I started from scratch and re-installed....samething, until I hit the power button, went from the dvd(iso) and did a fail safe, now my resolution is much better than it was the first time..Actual questions.....what did I do to fix it when failsafe never worked before?
Is there a way to save these settings, so I don't run into the problem again, because I don't even want to turn of my computer at this point?If i'm trying to dive in and learn the command line actions, is there any substancial difference between gnome terminal or hitting "c" to bring up the command line?
View 9 Replies
View Related
May 11, 2011
I'm a "new" Linux user, have been using Ubuntu for the last year with no problem but I decided to try out a different distribution to get more experience. So I decided to go with openSUSE (which I have been using on a VirtualMachine back at work). I have download the ISO, created an liveUSB (because my laptop dvd isn't working properly) and wanted to install openSUSE on the hard drive partition where currently Ubuntu is. So, I suppose that in order to do this I should choose the option "Import mount points" and select the Linux partitions (drive and swap) and that would be it.
View 2 Replies
View Related
Jul 14, 2010
setup a number of shared drives for accessing music, movies, photos and general files (documents, pdf files etc). now while a gui would be great, how to use the command line to setup these shared drives and also how to make the available in both windows and linux.
View 6 Replies
View Related
May 26, 2010
I am currently running Ubuntu 1004 but I have the OS installed on a USB 2.0 hard drive because my normal hard drive caved. However I am having problems because there is a SEVERE lag on my system. So my question is if I buy like a 16 GB USB 2.0 and use that instead of my 4GB one will it make a performance difference? My laptop is the Dell Latitude D600(1GB RAM, 1.6 Ghz Processor, ATI Mobility Radeon 9000) and I AM NOT in the market for a new laptop or a new hard drive. Edit: What about buying an external hard drive and using that instead of USB's?
View 2 Replies
View Related
May 25, 2010
What is the difference between vfloppy and virtual floppy disk drive?
View 1 Replies
View Related
Jun 20, 2011
I installed Tomcat (apt-get install tomcat6 tomcat6-admin tomcat6-common tomcat6-user tomcat6-docs tomcat6-examples) and it runs without problems.
I installed MySQL (apt-get install mysql-server) and it seems to run without problems too.
I changed the default JRE (update-java-alternatives -s java-6-sun).
The weird thing is - if I put the connector-jar into my web application (WEB-INF/lib), the connection works. If I put the connector-jar into usr/share/java, it does not work. If I write the jar location into the CLASSPATH and try "java com.mysql.jdbc.Driver", I get a NoSuchMethodError:Main, which means, that the jar is found?!
The datasource in the tomcat context.xml is:
<Resource name="jdbc/myresource" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="username" password="password" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql://localhost:3306/myschema" />
How can I make the database connection work without putting the jar into the WEB-INF/lib folder of the web application?
View 2 Replies
View Related
May 24, 2015
I've installed Debian 8 from the minimum CD. All is well. I'd like to compile PHP 5.6.9 from source. The current version installed on Debian is 5.6.7.I've attempted to remove 5.6.7 using
Code: Select allapt-get remove php
and
Code: Select allapt-get remove php5
to no avail. I've compiled PHP 5.6.9 from source on the machine, but php -v is still showing 5.6.7.I know this probably sounds silly, but I have this installed in a VM to mimic my clients server.How do I remove the current version of PHP on the system?
View 2 Replies
View Related
Mar 16, 2010
I'm trying to do a standard mod_jk setup--get apache to forward requests to Tomcat. I must admit that I'm not so familiar with the details of mod_jk, but I got this working before when I had used tomcat 6 directly from apache's website, but now that I've switched to the version in Ubuntu's repositories I can't get it working.
The log for mod_jk says:
Code:
[Mon Mar 15 23:59:41 2010] [5575:3004840816] [error] ajp_send_request::jk_ajp_common.c (1359): (ajp13_worker) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=111)
[Mon Mar 15 23:59:41 2010] [5575:3004840816] [error]
[Code].....
View 1 Replies
View Related
Apr 2, 2011
I installed ubuntu 10.10 on a desktop to use for a media server, and plus some. Everything worked! I proceeded to install the nVidia driver for the 9800gt After it was installed I rebooted per the notification after installation.So now my computer loads directly into terminal and I can't start the GUI. I tried startx but it gave that whole warning about the "nopowerconnectorcheck".
So I've done my research and I bought a 650w psu. Still no dice. I know that there is a way to turn off the power connector check but I have no Idea how.
View 2 Replies
View Related
Aug 11, 2010
making/buying a 3 pin j2 serial connector for my computer to connect to a programable chip
View 1 Replies
View Related
Jun 12, 2011
I'm trying to use MySQL's JDBC connector for java but even though I set the CLASSPATH variable, java cannot find the com.mysql.jdbc.Driver class.
Code:
[jordan@Jordan-Laptop java-stuff]$ ls /usr/share/java
cal10n geronimo-jta.jar java_cup-runtime.jar
[code]...
View 14 Replies
View Related
Aug 6, 2010
Is there a difference between using GPT partition table when formating hard drives and MS-DOS partition table? What are the advantages/disadvantages of using either?
View 2 Replies
View Related
Jan 29, 2011
I installed Ubuntu 10.10 (although in the System->About Ubuntu is mentioned that I have Ubuntu 11.04 - the Natty Narwhal, I don't know why) and I can not make the microphone from my headset to work. I used to have the Ubuntu 8.04 (I think so) and the mic used to work normally.
Everyone proposes to change the Connector in the Sound Settings but I do not have such option (you can see the attached image). What should I do?
View 3 Replies
View Related
Jul 20, 2011
I'm using Ubuntu 11.04. I'm trying to get a Cisco Valet Connector AM10 to work. It's one of those ZeroCD USB devices that is both storage and modem. Using this link:
[URL]
I filled out usb_modeswitch like this:
Code:
# Configuration for the usb_modeswitch package, a mode switching tool for
# USB devices providing multiple states or modes
#
[code]....
View 9 Replies
View Related
Sep 11, 2010
I'm running CentOS 5.5 on a Shuttle SG41J1 PLUS barebones system. All is working well, except the sound. I get sound only on the front connector (meant for headsets). With XP on that box I get sound on both the front and the rear connectors. Under XP I see the dialog as attached to this post. It even knows where I have something plugged in. Under CentOS I have two devices listed:0: HDA Intel (Alsa Mixer) 1: IDT ID 76c1 (OSS Mixer) The second one is marked active (*).Any idea on how to make the sound work for the rear connector too ?
View 1 Replies
View Related
Feb 21, 2011
I am trying to install Lenny and get to the point where it says to select programs at which it freezes.
View 7 Replies
View Related
