Debian Hardware :: Unable To Find Suitable Destination To Install 32-bit Compatibility Libraries
Feb 24, 2016
I am trying to install some NVIDIA drivers on my machine. I went through the process and got this message:
Code: Select allWARNING: Unable to find a suitable destination to install 32-bit compatibility libraries. Your system may not be set up for 32-bit compatibility. 32-bit compatibility files will not be installed; if you wish to install them, re-run the installation and set a valid directory with the --compat32-libdir option. URL...Where in I ran this in the terminal to create the 32-bit document tree.
Code: Select allsudo apt-get install ia32-libs
E: Package 'ia32-libs' has no installation candidate.
I really just want to get these NVIDIA drivers up and running. I already installed and updated the headers to just be able to half-way install the drivers (the second monitor works now).
The intention is to have this system dual-boot. When i first put it together, i decided to setup a raid5 array spanning 3 sata drives. I installed Windows 7 first, decided i'd get to Linux later. I left 150mb or so at the beginning of the array for /boot, and about 200gb at the end for my linux install. i'm getting to the linux install. My distro of choice is Fedora 12. I start the setup, and at the point where it's time to partition, the installer tells me that its unable to find any suitable storage devices.
I Crtl-Alt-F2 to a console, and fdisk -l. Fdisk reports three individual drives which all have partitions already. All have free space. None make sense. So i turned to google, and found some threads which explain that this chip doesn't run a true raid, rather its what's been referred to as fake raid. Which is that it depends on the windows driver in order to actually present the array to the OS, and that the best way to get by that on linux, is to break the array, and use LVM instead.
That's all well and good, but i lose two things in doing that. First i lose the resiliency of raid 5, and second, well, what does that do to my windows install? I've considered moving all of my data from windows to other machines, and then just starting from scratch, but i'd really much prefer a method of using the chips fake raid in linux. Is there a driver, or module which i can install to make this happen?
Why many Linux distros are trying to use always the latest versions of the libraries and don't save the old libraries for compatibility? I mean, I can see libtiff for example, i can found a libtiff.so.5 on my /usr/lib, but doesn't store a libtiff.so.4 or 3 just for binary applications or games. For this example, I need libtiff.so.4 for uplink.
That should happen too on the old version of sims for linux, some ID games or others.What's wrong with storing old libraries? PD: Yay, my first post on 3 years!
The machine boots, graphics come up, login window shows up, but after login there is only the background window (and mouse). My .xsession looks like this:
so I was trying to do sheduled updates on server, which is doing xen virtualization doing kernel update (to 2.6.18-164.el5xen) i got the following error:
Running Transaction Installing : kernel-xen [1/1] grubby fatal error: unable to find a suitable template
and of course new kernel doesn't appears in grub.conf and don't know what is cause of this problem last kernel i was updateting in August and as i remember everything went just fine:
current kernel: 2.6.18-128.4.1.el5xen #1 SMP Tue Aug 4 21:33:24 EDT 2009 i686 i686 i386 GNU/Linux #cat /boot/grub/grub.conf # grub.conf generated by anaconda
[code]....
also could it be because running kernel is removed?also could it be because of LABEL entry, not /dev/... ( as i found out it was such bug, some years time ago)
i got problem which slows my boot to linux. Before loading Ubuntu logo in console i see fast flash with words: "Warning: unable to find a suitable fs in /proc/mount, is it mounted? Use --subdomainfs to override." What should i do? To fix that warning?
I am running Debian on a g3 mac and when I set the screen resolution to 1024 by 768 I cannot see everything, for instance the scroll bar on iceweasal is hidden, so I switched the resolution to 800 by 600 and then i load up evolution and find that the forward button isn't visible, is there a way to get a custom resolution that works with everything
I tried to build firefox with PGO using Intel C Compiler (icc), but, configure gave this error message.
Code: configure: error: Could not find the following X libraries: -lX11 -lXext -lXt *** Fix above errors and then restart with "make -f client.mk build" When I tried it using gcc, there's no error msg. What can I do? My .mozconfig file is... Code: export CC=icc
I accidentally deleted one of the libraries in /lib or /usr/lib and now when I boot into Debian, it won't load the GUI. I get an error message saying that something failed because the library needed did not exist (I couldn't read it because the text was scrolling by so fast, so I don't know exactly what it said). I need to find an archive or something of all the system libraries for Lenny so I can reinstall them. Is there a place online where I can download them?
As title says, running unetbootin throws this error [URL]...... I can easily find the files myself (go to synaptic > look at installed files > scroll down) and I can't remove/purge because they would require me to remove some important software (XFCE).
I'm having trouble installing software from the source files. From what I can gather the problem lies with not having the correct c libraries installed. My understanding is you use the ./configure, make, and make install commands in a terminal to install. And that the configure command checks to see if you have everything to install. this is the output when I try to configure:
checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p
So I just recently got an HP pro 1005 all in one PC and tried to install Debian 8.2 on it through a bootable Uefi USB, however, when trying to install, there's always an error like this: "The attempt to mount a file system with type ext4 in LVM VG debian-vg, LV root at /failed."
Also, no matter how many times I completely wipe every partition, there's always this message at the start of the installation saying Windows is already installed as BIOS compatibility mode, and asks me if i still want to install as Uefi, I was wondering if that had anything to do with my error.
I checked the drives health and there wasn't any kind of problems, passed all the tests.
I'm still trying to find out if my coby mp3 player will actually play mtv video files as is advertised.
ffmpeg -formats does list mtv but the only command I really ever used was one to convert a vid to an mp3 so I tried Code: ffmpeg -i test.mp4 -acodec copy output.mtv it returns Code: Unable to find a suitable output format for 'output.mtv' I can't find any mtv files online for purchase or free for that matter, so I know this is all pretty obscure but shouldn't there be a way to convert them since ffmpeg lists mtv format?
I am running ubuntu 10.10 on a sony vaio f115. I am trying to install the printers for a brother mfc5460cn. I have used apt-get and aptitude, I have used sudo and sh all to no avail. I always get the same messages: cannot lock administration library (var/lib/pkg/) (11 temporarily unavailable) and cannot get lock/var/lib/dpkg/lock - open (11 temporarily unavailable) How do I gain access to these libraries?
I'm making a program that uses Scapy to sniff for a packet being sent to a certain host, then sending another packet with the Ethernet, IP and TCP headers identical, but a different payload.Whenever I try to run this, however, I get these errors:Code:WARNING: No route found for IPv6 destination :: (no default route?)WARNING: Mac address to reach destination not found. Using broadcast.Does anyone know what I can do to fix these problems?
I've been poking around for the last week trying to find a suitable small business accounting software that will work for us. To make a long story short I stumbled upon SQL-Ledger and it looks like a very good application just what we're looking for... and low and behold its in the repositories! Anyway I installed the SQL-Ledger package but unfortunately there's no way to load or open this app. Synaptic shows its installed but there's no gui or and reference in the menu. Searching using the filter in the menu results in nothing. So I'm assuming SGL-Ledger just needs a gui associated with it to open it right??
I am currently running Lucid,and in every single attempt to play any mp3,it claims that it cannot find a suitable plugin,which is weird because I am nearly 100 percent certain that I did install all of the restricted extras.The funny part is that it is trying to install a Soundblaster Voc plugin?
I'm trying to use nspluginwrapper to run 32bit Flash in Iceweasel. I need some 32bit libraries that aren't included in ia32-libs, like libnss3.so and libssl3.so. However I have no idea how to get them. I've tried aptitude install ia32-libs-libnss3 like it says on the wiki but it just tells me that it can't find ia32-libs-libnss3. I've also tried aptitude install libnss3.so but it gives me the same error. I'm running amd64 Lenny 5.0.5. What should I do?
I have a problem with linux, I got the message "configure can not find x11 libraries" while I was installing xvista program on suse 10.3, Do you know what is the problem?
not trolling for a flame war but I simply added the testing repository earlier and did an apt install of just lottanzb and it ended up taking ages and installed lots of new files and removed things like Epiphany etcetera, and that one command had me having to reinstall as it messed everything up so it wouldn`t work at all even the shell was messing up.I have never had Windows break totally from an install, but first try with Linux and it did so could someone explain why an apt-get install lottanzb would change all my libraries, config files etcetera with the testing version over Lenny stable?
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation
So far I have been using 32 bit ubuntu in my IBM ThinkCentre - 2.5 GB RAM, Intel Pentium Dual Core inside (1.60 GHz X 2) machine. Now I am coming to Debian soon. As a student I am involved in processing lot of satellite imagery for my project work. Therefore a friend recommended me to use 64 bit OS as it would make image processing faster. Is my hardware sufficient for that?
I've got a problem with 'seeing' other machines on my Network. I have two laptops both with F10 on them however I can't ping either of them. They can connect fine to the internet and ping the router, they are both on the same subnet with Firewalls disabled on both machines. When I try to ping it says: "Destination Host Unreachable". I've tried firing up Wireshark to see if that will give me any clue but even that doesn't show any packets whatsoever from the other machine across the Network. It's like they are completely invisible to each other.
I am trying to compile some software written by a colleague in the lab that uses mpicc. When it is compiled on his account, it works fine, but fails on mine (on the same machine). When I type simply
>mpicc
I get the error
/usr/lib64/mpi/mpi-openmpi-intel/usr/bin/mpicc: error while loading shared libraries: libintlc.so.5: cannot open shared object file: No such file or directory
I am hesitant to mess around in .bashrc or .aliases before I have a little more information.
I've been trying for days now to build my first FastCGI application using gcc.
This is the output:
Code:
I believe I wouldn't have to refer to the lib path, but I added the -L flag to be sure.
The directory /usr/lib includes (among others) these files:
Code:
I have tried to follow these instructions. The files in the tar.gz archive provided by FastCGI.com no longer corresponds to the instructions there, but I was still able to run the ./configure and make commands so I believe FastCGI is installed.
But why can not the library be properly linked to? Really hope you can help me out on this one!
where can i find the qt libraries..?? building an rpm failed.
Code: checking for Qt libraries... no :-( configure: error:
I can't find the Qt libraries. It is recommended to set the QTDIR environment variable. Install the Qt libraries, or if you have them installed, override this check with the --with-qt-libraries argument, and I'll take your word for it. i got qt and qt-devel
I have just downloaded, configure'd, make'd and make install'ed the Google Log Library to my computer. It built all required files (as far as I can see) and copied the .so file (libglog.so.0.0.0) to /usr/local/lib. Then it created two symbolic links called "libglog.so.0" and "libglog.so" that point to that shared object file:
Now I'm trying to execute a program that uses the library, but when I start it, I get the error message that it can't open the so-file:
cloud:/home/blam/redirector/redirector2# ./redirector ./redirector: error while loading shared libraries: libglog.so.0: cannot open shared object file: No such file or directory
/usr/local/lib is included in my /etc/ld.so.conf file, and another library that's located in this directory is loaded correctly.
A 32-bit program (Cisco AnyConnect VPN Client) appears to be trying to load a library from /usr/lib even though the 32-bit library is installed in /usr/lib32:
