Debian Hardware :: Primusrun Gives A Number Of Errors
Dec 4, 2015
I use Debian 8. My discrete GPU is nVidia GT 640M. My graphics driver is nVidia proprietary driver v. 340.65. I installed bumblebee recently following [URL] .... and no updates are available. glxgears runs fine with primusrun.
When I run
Code: Select allprimusrun vlc
My computer powers off immediately like it was disconnected from all power.
When I run
Code: Select allprimusrun totem
and open a video, it plays with about 1 fps.
I have
Code: Select allrcutree.rcu_idle_gp_delay=1
appended to the GRUB_CMDLINE_LINUX_DEFAULT line in my /etc/default/grub file. In my /etc/bumblebee/bumblebee.conf, I have
Code: Select allDriver = nvidia
KernelDriver = nvidia-current
View 0 Replies
ADVERTISEMENT
Jun 29, 2010
I'm running 64-bit 10.04, upgraded from 9.10. The problem I am experiencing is that any user accounts aside from my main account are problematic. This includes any accounts I add, as well as the GDM guest session.The specific problems that I have thus far experienced are as follows:
1. The desktop loads often improperly. In the latest instance of this the graphics on the right side top panel were randomly chopped-up, leaving parts of my clock on either side of the volume control, among other things. 2. If I make ANY customizations to the desktop at all, the desktop takes nearly a full minute to load on log-in. 3. Flash videos don't work properly on Firefox. Sometimes they only play after refreshing a page, often they will not load at all. Also, attempting to load or play a flash video will sometimes causes Gnome or Firefox to crash. 4. (And this is the one that REALLY has me stumped) Whenever I log into my main accountant after logging out of another account, the IBus control appears in my system tray.However, when I open the IBus preferences the associated check box is (and has always remained) unchecked.Not sure where to go with this one. More than anything, the IBus bug makes me unsure of where to even begin looking for the problem.
View 1 Replies
View Related
Sep 15, 2010
Is there any guestimate of the total number of debian users or debian computers world wide?What about total GNU/Linux users (any distro)?
View 2 Replies
View Related
Oct 29, 2010
I don't want to start any kind of flame war or comparison with any other distros, but I'm curious how many users of Debian there are.For example, there's the popcon system which tells you for each package what percentage of popcon users have that package installed. Which is great, but what total number of users does that equate to? Is there any way to tell whether popcon is used by 90% of Debian users, or 1%, or 0.01%? if popcon says that a package is installed by 0.5% of users, how many is that? Even a rough guesstimate would be interesting.
View 6 Replies
View Related
Sep 21, 2015
cnee makes xnee session file .xns. In that file, each line has 9 numbers. What does each number mean?
I have xnee 3.19. I looked in this pdf file, but could not find the answer.
XWindow System Protocol, XConsortium Standard, XVersion 11, Release 6.8
View 1 Replies
View Related
Sep 17, 2010
Is it possible to setup SSH Daemon to listen on multiple ports and only accept specific groups to a given port? In the past I've created a second SSH Daemon by copying the config file and /etc/init.d/ daemon then configuring each port separately / rules however if I was able to maintain just the one Daemon that would be optimal. Is this possible?
View 1 Replies
View Related
May 8, 2011
way to know how many writings I coulddo on my usb pen, by the moment that the number of writings is limited...
View 12 Replies
View Related
May 18, 2010
I'm new to Debian and I have just installed it on three machines. To begin with they checked about 60 or so repos when doing an update. Then quite quickly this dropped to 48. I have removed the DVD media from the sources list after installation but that was before I saw this drop. It happened after an update as far as I can tell. I didn't think anything of it at the time. By the time all three were set up they were all only checking 48 repos. However I also have a VM, for trying out new stuff, and whilst that has been updated it still remains at about 60 (currently 59).
[Code]...
View 6 Replies
View Related
May 6, 2011
I get error 'invalid magic number' when using this
vmlinuz 2,417,247 bytes
if I use this:
vmlinuz 2,417,312 bytes
then later it complains about kernel mismatch
View 7 Replies
View Related
May 4, 2011
I have system with debian linux installed. i got to know that debian doesent have IPTABLES firewall installed in built. i found the shoerwall firewall installed on system. now i wanted to open port no.7 for application comunication purpose please let me know if any one knows.also one more thing.. if i type command iptables --list i can see list of rules installed on ssytem....confuse which firewall application installed on the system.
View 14 Replies
View Related
Nov 9, 2015
I currently have a problem in running rsync on 64 bit Debian Jessie (although the problem also occurred with 64 bit Debian Wheezy)I am trying to use rsync to archive my home directory (which is on a hard disk) to a USB memory stick. The home directory is about 18GB in size and the memory stick has 32GB.
Unfortunately, rsync hangs after copying a certain number of files and the process eventually has to be killed. Rsync was rerun but hung again at about the same point as before.This has now happened several times. Each time the hang occurs at about the same point.Use of strace after the hang shows that rsync appears to be processing a pdf file at the time, although not always the same pdf file.I originally had the rsync hang problem on a PC which ran 64 bit Wheezy and which used a USB 2.0 port.
I now am running rsync on another PC, which runs 64 bit Jessie and which uses a USB 3.0 port..I have also tried three different USB sticks, two from one manufacturer and the third from another manufacturer.All give similar rsync hangs.
View 11 Replies
View Related
Aug 1, 2011
how one can find the number of packages in the main archive for amd64 distribution on say sid/unstable ? Also if its possible to know the number of packages in amd64 distribution at a specific point in time (whenever I update my index) .
View 1 Replies
View Related
Mar 7, 2011
I have recently switched to Debian and got everything working great except for one thing..When I want to kill some time by playing a game (in wine or native) in fullscreen it works fine except for a big number I get in the left corner of my screen that won't go away until I close the game and open the ATI control center.This is very frustrating and quite annoying. I am using a dual monitor setup and I have tried disabling my 2nd monitor when I play a game but that still causes this problem. Also I am using the drivers I got right off the ATI website.
View 2 Replies
View Related
Feb 11, 2010
What is the maximum number of virtual network interfaces possible?I would like to create around 300 or so. This is needed to simulate a 300 node network.
View 6 Replies
View Related
Jul 16, 2015
I use debian 8 and sometime when I install some packages I see these errors
Code: Select allProcessing triggers for shared-mime-info (1.3-1) ...
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Unknown media type in type 'uri/mms'
Unknown media type in type 'uri/mmst'
Unknown media type in type 'uri/mmsu'
Unknown media type in type 'uri/pnm'
Unknown media type in type 'uri/rtspt'
Unknown media type in type 'uri/rtspu'
Processing triggers for man-db (2.7.0.2-5)
but app or packages installed
View 1 Replies
View Related
Jul 29, 2011
So I recently purchased a Linux Virtual server and I've got everything configured pretty much except for PHP5 for Apache. I keep getting this error when trying apt-get install php5 and apt-get update:
[Code]...
I checked my sources.list file and it's setup correctly, and I even added ftp.us.debian.org but it's still not working.I'm pretty familiar with Linux and can't figure this one out. The server is connected to the internet as I can access my websites from the internet and SSH into the server, and the firewall is configured to allow SSH, HTTP, and FTP. I believe apt uses HTTP and FTP so it shouldn't be blocking anything.
View 1 Replies
View Related
Jul 29, 2010
During my upgrade I had errors. 3 times the same list of errors.
Once they followed:
Once they followed:
Once they followed:
The errors are:
Should I try to do something about it? My computer seems to be functioning normally.
View 5 Replies
View Related
Feb 14, 2011
compName:/home/usrName# apt-get update
I don't have this problem when I take this laptop to work and connect to the network there, so I thought it must be a problem with the way my modem/router is configured. But when I turn off the firewall, the problem persists. Actually, I'm not very knowledgeable about networking issues, so I'm not sure I'm turning off the firewall correctly, but in the config web page for my router, I go to firewall settings, pick the computer by name, and choose an option that says "Allow all applications (DMZplus mode)". I've also rebooted the laptop since changing this option and tried again with the same results.
View 2 Replies
View Related
May 27, 2011
I am running Debian Lenny and if I try to install something with apt-get it behaves normally until near the end when I get this sort of thing:
Code:
And more of the same. The file w3m contains this:
Code:
So what please is the syntax error and how do I correct it? What is the function of /usr/share/menu?
View 8 Replies
View Related
Oct 9, 2010
Been living with apt-get not working for a while now, don't know how it broke but i'm running a 2.6.26.8 kernel for vmware and maybe thats it?
Code:
The following extra packages will be installed:
The following packages will be upgraded:
View 10 Replies
View Related
Feb 21, 2011
I'm suddenly getting GPG errors on Debian testing:
BADSIG AED4B06F473041FA Debian Archive Automatic Signing Key. I tried reinstalling the keyring but no change.
View 8 Replies
View Related
May 21, 2011
Why does unix ps -l whows one number in column "PRI" but in same time ps -o pri shows another number? cpu and nice are zero for those processes
View 1 Replies
View Related
Feb 22, 2010
I',m executing ping, but it didn't work, in order to find the mistake in my network I would like to know how to see the errors:
Code:
18 packets transmitted, 0 received, +12 errors, 100% packet loss, time 17038ms, pipe 4 I want to see this +12 errors. Could I do that?
View 2 Replies
View Related
Feb 26, 2010
I am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....
View 1 Replies
View Related
Dec 28, 2010
I just upgraded to Debian Squeeze (from Lenny) and there are several errors occuring.
The first one is that whenever I want to use mplayer it gives me the following output:
Maybe that has to do with faulty drivers, I'm not sure yet.
What's bugging me a little bit more is whenever I start a shell like konsole or xterm it displays the following:
It roughly translates to:
A third problem is when I try to use something like mplayer or java and then try the tab completion I get yet another error.
Which would be:
So I get "bash: _get_comp_words_by_ref: command not found", however it's not like that with all of my applications. Tab completion after the command "vlc" for example works just fine.
View 14 Replies
View Related
Sep 30, 2015
Since installing debian 8.2 I have had a list of errors appear during the boot, I get the usual Loading, please wait message then a series of random errors.I think I am stuck in initramfs, then typing exit resumes boot. Should I be concerned and can I jump straight into the login screen without typing exit each time?
Here's a photo [URL]
View 7 Replies
View Related
Nov 11, 2015
I have upgraded the packages on wheezy and I see lots of errors
Code: Select allaptitude update aptitude upgrade.
I see Code: Select allErrors were encountered while processing:
mysql-server-5.5
ntp
rsyslog
apache2.2-common
apache2-mpm-prefork
apache2
bind9
corosync
[code]...
Still I am not able to install the dependencies.
View 13 Replies
View Related
Jan 15, 2011
I've been using Linux ( Ubuntu from like 4 months ) the first time of my life and I just love Linux, but I just feel that I need to switch to Debian like its the best and the powerful distro. I've installed Debian pretty well, then when rebooting it. I cant find my Ubuntu distro on the grub loader, then when I enter to my Debian distro. I just have that black screen with the note (out of range), so I've went to Google but as u know I am still a rookie, so I could avoid this problem by using.
alt + ctrl + ( - ), so I went to connecting the internet maybe I could download that nvidia drivers so it may fix the problem, but the most shock is that the internet isn't working with me. I am pretty sure that I've entered the IPs correctly but I really don't know whats the main problem is, with Ubuntu its much easier and it really worked quickly but as I said I just feel something for Debian , something that attract me to it.
View 3 Replies
View Related
Jun 28, 2011
I have Debian 6.0.2 / 64 bits installed on a VPS.I cannot install any package because of this error:
Setting up nfs-common (1:1.2.2-4) ...
insserv: Service portmap has to be enabled to start service nfs-common
insserv: exiting now!
[code]....
View 1 Replies
View Related
Aug 25, 2010
I did an upgrade a while back to lenny, but still get these errors..
Here's what I get when O do apt-get update:
View 14 Replies
View Related
