Every thing was running ok in debain squeeze, but last time when i boot the system and connected to the Internet with the dialup connection, the graphical browsers like firefox and epiphany stop working and cannot open the web pages, the error is " Problem loading page", other clients like nslookup, ping, ftp clients and text browser lynx working ok.
View 4 RepliesI seem to have stumbled on a problem regarding internet connectivity. My web browser (Firefox or any other web browsers) can't completely load the desired webpages like yahoo.com or even google.com.But as I read different blogs in this forum, I have convinced myself that there is an internet connection.= when I ping different websites, Iseem to get good responses from those sites. Only when I need to browse the webpage do get no results.= ifconfig seems to respond well enough.= even "route" shows the IP my router/gateway correctly. The problem , I think, lies on the proxy settings or the DSN.
View 3 Replies View Relatedbrowsers consistently hanging and not fully loading web pages. this happens in all the browsers i have tried. Opera and Chromium and Firefox. This only happens in Ubuntu. All the other computer in this house load fine and this windows side of this computer loads the pages the right way. At this point i don't know what to do but keep hitting stop and reload and few time till the page loads. can anyone help with this? Also I have tried to clear the cashes. One question where do the temporary Internet files go so I can manually clean that folder out. And also Firefox isn't to bad and the other browsers I just don't like it that much as I like the opera.
View 2 Replies View RelatedI have openSUSE 11.2 64-bit KDE, I have installed it with lan cable connected, install updates and than switch to wireless.Everything worked great until I went to my girlfreind with laptop, there I can connect to router, use Skype but can't browse pages with firefox, can't install packages with YAST Also wired connection gives the same result but her PC have no problem with Internet.I have traied ifup, deleting /etc/resolv/conf, disabling NetworManager routing options with no succes
View 9 Replies View RelatedI just installed a fresh copy of Ubuntu 10.10 on a HP DV2500 laptop. Everything installed as expected but I am having some wireless issues I was hoping somebody could assist me with. I am able to connect to my network via wireless with no issues. However, when I attempt to browse the internet it will not connect to any pages. Obviously when I connect it via CAT 5 all works as expected. Any ideas on how to solve my wireless issues?
View 1 Replies View RelatedI'm not a Linux noob, but I am far from guru. I'm running a single board computer with a slightly customized Debian Etch (customized by the SBC vendor). No Gnome/KDE/X installed. My application is a control application which uses SDL (Simple DirectMedia Layer) to paint some basic graphics on the VGA. I need to run it as root because the application calls iopl() to access an IO port.If I run my application manually from the command line, life is sweet. From Googling around, I found http://www.debian-administration.org/articles/28, and hence I:1) Created a script in /etc/init.d2) Executed "update-rc.d scriptName defaults" to link the script into the boot sequenceAll very straightforward. My application starts at boot. But when I try to SSH/SFTP into the SBC, I get "Connection refused". So I can't manage the SBC anymore, and this is a big problem. I am not sure if it's relevant, but my application starts before the SSH daemon.My script looked like:
case "$1" in
start)
echo "Starting my application"
[code]...
i updated both browsers i have and lost my secure log-in pages (no padlocks showing ) concerning different Web mail accounts.Just before i did these updates i checked an unrelated thing on-line regarding my sound card of which i kept a copy of and got this message below :
!!ALSA/HDA dmesg
!!------------------
[ 12.762633] cfg80211: Calling CRDA for country: AM
[code]....
So far I've tried it with Iceape and Midori. It crashed both of them. Also crashes Iceweasel and causes flash to crash on Chromium.
View 4 Replies View RelatedIn the Release Notes for Jessie, it is stated that webkit browsers do not receive security updates in a timely manner and so are not secure. It is recommended that one uses a gecko-based browser or Chromium for 'general' web browsing. Yet I haven't read anything about this elsewhere and I'm guessing a lot of people don't read the Release Notes, so perhaps it's only something I would only need to worry about if I worked for MI6?
Anyway, Chromium and Iceweasel are becoming far too sluggish for my computer. I would want to experiment with Konqueror, Midori, Epiphany and Opera, but don't want to do anything insecure. I'm of the understanding that without Mandatory Access Control, exploits in applications often allow attackers to access all of the user's files; I want to avoid that.
On the Opera page on Debian Wiki, it says 'Opera is a non-free (proprietary) software. It isn't supported by Debian. It's probably wiser to use a supported web browser ! '.
I've installed debian and configured the network: I do ping to the gateway and it connects, I ping one distant server directly with the IP and it can see it (but not with ping [URL]), but when I try to use internet it says that maybe the url is wrong, but it is not.
And when I try to update (apt-get update) it give me a bunch of errors :
W: Failed to fetch http://ftp.es.debian.org/debian/dists/s ... elease.gpg Could not resolve 'ftp.es.debian.org'
W: Failed to fetch http://ftp.es.debian.org/debian/dists/s ... ion-en.bz2 Could not resolve 'ftp.es.debian.org'
[Code].....
I just installed Debian Stable on an old HP Mini 110-1033CA netbook. glxinfo indicates that I have Intel 945GME graphics. xserver-xorg-video-intel package is installed but neither google-chrome stable nor Firefox 29 appear to be able to use hardware acceleration. "about:support" and "chrome://gpu" both show that hardware acceleration is unavailable.
How can I get my graphics hardware working?
Code: Select allnathan@hpmini:~$ glxinfo | grep OpenGL
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GME x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 8.0.5
OpenGL extensions:
Code: Select allnathan@hpmini:~$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03)
I know how to manage them from a commandline but I was wondering if there are any graphical partition editors that understand and work with lvm2?
View 1 Replies View RelatedFirst I wanted to install the proprietary software Virtualbox-PURE cuz there is usb support, I need.
Added the Repository and installed it (virtualbox-4.0) and dkms.
Here is my sources.list
$ cat /etc/apt/sources.list
# Debian Hauptrepos
deb [URL] squeeze main contrib non-free
# Debian Update-Repos
deb [URL] main contrib non-free .....
The result of all is:
virtualbox is still not running. I use experimental branch flash is not working now. flashplugin was installed, I restarted my browsers, not working. I tested it with opera, chromium and iceweasel.
My questions are:
How I ever can go back to stable?
How can I make virtualbox run?
How can I make flash run?
I'm using debian squeeze with gnome 2.30.5. When you need more infos or results of commands I give it to you. 2 days of work and nothing is running.
I'm having trouble getting a working java plugin on my Debian Squeeze Amd 64 system. I've tried some of the suggestions from the forums on linuxquestions (specifically http://www.linuxquestions.org/questi...owsers-701947/), but am not having any luck yet.I've installed the sun-java6-{bin,fonts,jre,plugin} packages via Synaptic. When I try to check java on Sun's website, the applet seems to hang.Here's what Iceweasel says on aboutlugins:
Java(TM) Plug-in 1.6.0_18
File name: libnpjp2.so
The next generation Java plug-in for Mozilla browsers.
[code]....
I have a problem with Debian Squeeze. I have installed Squeeze and after that I installed LDAP according tho this guide: [URL]. When I log in and try to start Epiphany or Iceweasel nothing happens. I tried installing Chromium, but this program starts with the message "Chromium didn't shut down correctly". After some waiting it comes with another messages saying "Page(s) unresponsive. I also noticed that Open Office won't startup, other programs don't seem to have a problem.
View 2 Replies View RelatedThe solution for Firefox/Iceweasel at the bottom.
By the way, have you present those websites that have a background video on their divs, wow those are really cool than annoying, I have been looking for a while this morning to find a solution without success so how to block these videos on Firefox and Chromium?
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View RelatedI'm on a Debian Lenny system. I recently installed scim to use the Urdu language and have gotten it to work by following the instructions on this website.
Everything works except that Iceweasel and Epiphany don't display the typed Urdu fonts properly. The characters are there but sometimes they don't join properly.
This problem doesn't occur with other programs such as OpenOffice, etc.
How fonts should be displayed (eg. OpenOffice): [URL]
How fonts are displayed in Iceweasel: ہ ا ں
How do I make Iceweasel and Epiphany behave properly? The characters remain disjointed even if I select the traditional keyboard method of entering text (i.e. via the Keyboard Indicator GNOME applet [India>Urdu]).
I have the appropriate locales installed:
locale -a
C
en_US.utf8
hi_IN
hi_IN.utf8
POSIX
ur_PK
ur_PK.utf8
I've noticed that even though these characters appear disjointed in Iceweasel or Epiphany, they appear normal when I look at the entered text, via Firefox in Windows. That's strange.
The Character Encoding is the same in the browsers on both OS s - UTF8. So clearly this isn't a character encoding issue I guess. There appears to be a problem with the way Urdu fonts are rendered in the Debian version of Firefox (gecko engine issue maybe?).
I just installed wheezy and upgraded to jessie. I had previously gotten sound working in wheezy by installing the flashplugin-nonfree and flashplugin-nonfree-extrasound packages, after configuring my headset in system settings. However, now I can't get sound to play in firefox. I've installed flashplugin-nonfree, flashplugin-nonfree-extrasound, and pulseaudio, still without luck. The volume is turned all the way up in alsamixer, sound tests play fine, and I can play music in VLC without any problems. This leads me to believe it's not a problem with drivers, but with some package I'm missing that will allow firefox to play sound. Sound wasn't working in the default video player either, before I installed the flash plugin. Is there something I'm missing?
Also, sound doesn't play on Konqueror either (KDE browser), which seems to indicate it's a problem with flash and not with firefox itself. After removing the flash plugin and installing pepperflashplugin-nonfree to ensure the pepper plugin was used instead of flash, sound still would not play in chromium, so I reinstalled the flash plugin and still don't have sound in any browser.
In debian lenney I use the dnsmasq as dns resolver, and wvdial to connect to isp, the wvdial connect to the isp but cannot browse the internet with firefox, these are what is done:
Dec 28 21:19:53 salman pppd[8398]: pppd 2.4.4 started by root, uid 0
Dec 28 21:19:53 salman pppd[8398]: Using interface ppp0
Dec 28 21:19:53 salman pppd[8398]: Connect: ppp0 <--> /dev/ttySHSF0
Dec 28 21:19:54 salman pppd[8398]: PAP authentication succeeded
Dec 28 21:19:54 salman kernel: [ 2655.428889] PPP BSD Compression module registered
Dec 28 21:19:54 salman kernel: [ 2655.500676] PPP Deflate Compression module registered .....
Same pc with same isp, modem and dnsmasq working in fedora 12 as I am posting from from fedora 12.
I'v recently migrated from Ubuntu to Debian. however when attempting to browse one of my ntfs partitions I get the following error "Invalid mount option when attempting to mount the volume 'a' a is the name of the ntfs partition i'm trying to browse.I'm using Debian lenny
View 7 Replies View RelatedAfter doing updates to get current with Debian Jessie, I've noticed very annoying network problems going on.
This all happened while also setting up a media server box which led me to much confusion, much of what is described here [URL] ....
I've started this new thread to try to diagnose and properly take care of this specific problem alone:
Browsing the internet becomes very slow, unbearably to the point everything keeps loading up forever. This only happen while having a torrent application opened, the effects are almost immediate, closing the application and browsing resumes as normal.
How about throttling back torrent? This does not work, it even doesn't even need be at top speed. With bare minimum connections and speed will still lead browsing to a crawl.
Even so, every other device on the network is un-affected, router and other PCs continue to browse and respond very well, making it a specific on the computer in question (but also happens on my other debian jessie machine).
Can I even reach the internet? Yes I can, and this is the weird part... I can ping, solve DNS and almost everything else without issues, the only thing affected is actually browsing the internet.
I'd even setup DNS cache with dnsmasq to see if it could speed things up. Disabled ipv6, and trying pretty much every method I could find.
Having pretty much ruled out dns problems and internet connectivity, I'm at a loss for what to look for and try. Only symptom I can describe now is that the browser will start to load up webpage but never completes... but only while torrent is active.
My current setup:
I'm on Debian Jessie, a desktop with eth manually connected. Using dnsmasq for dns caching. Disable ipv6 on the network (by the way, it keeps disabling it self I dunno why).
Running KDE with ktorrent as the client. The same thing happens on my setup media box, also Debian but with deluged running instead.
Browser in question are Firefox and Chrome, both have issues with this.
Turns out it was just a setting in my own router, that apparently limits numbers of connections made, meaning while torrent is working other connections were sure dead.
But it also happens when lots of connections are being made in other ways too. The router in question is Humax HG100R-L2, provided by my ISP. The setting is in the firewall section called IP flood detection.
When in Thundar (on XFCE - Debian 8.2) and I click the "Network" icon in the left sidebar the following message is displayed.
Failed to open "/ on". Specified location is not supported.
In debian lenny I use the dnsmasq as dns resolver, and wvdial to connect to isp, the wvdial connect to the isp but cannot browse the internet with firefox, these are what is done:
Dec 28 21:19:53 jan pppd[8398]: pppd 2.4.4 started by root, uid 0
Dec 28 21:19:53 jan pppd[8398]: Using interface ppp0
Dec 28 21:19:53 jan pppd[8398]: Connect: ppp0 <--> /dev/ttySHSF0
Dec 28 21:19:54 jan pppd[8398]: PAP authentication succeeded
Dec 28 21:19:54 jan kernel: [ 2655.428889] PPP BSD Compression module registered
Dec 28 21:19:54 jan kernel: [ 2655.500676] PPP Deflate Compression module registered
Dec 28 21:19:54 jan pppd[8398]: local IP address 175.106.57.186
Dec 28 21:19:54 jan pppd[8398]: remote IP address 175.106.46.32
Dec 28 21:19:54 jan pppd[8398]: primary DNS address 208.67.222.123 ....
cat /etc/resolv.conf:# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# Do not edit this file by hand -- Your changes will be overwritten
nameserver 192.168.1.1
nameserver 127.0.0.1
nameserver 208.67.222.123 ....
#ping 175.106.46.32
PING 175.106.46.32 (175.106.46.32) 56(84) bytes of data.
64 bytes from 175.106.46.32: icmp_seq=1 ttl=255 time=190 ms
64 bytes from 175.106.46.32: icmp_seq=2 ttl=255 time=249 ms
# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable
From 192.168.1.1 icmp_seq=2 Destination Host Unreachable
this is my /etc/dnsmasq.conf:
dnsmasq.conf
this is the epipheny browser error:
"[URL]" could not be found.
Check that you are connected to the internet, and that the address is correct. If this page used to exist, you may find an archived version: in the Google Cache.
I've configured Debian 8.3 on AMD quad cores Opteron, for change, i've choise XFCE4. The desktop work fine, but thunar doesn't browse my local network, i cannot see my other computer ! I think there are missing an applet ? but whitch it ?
View 2 Replies View RelatedEvery time i try to click it, in the file manager, I get the error failed to open "/ on" The specified location is not supported.
I need to be able to connect to my storage server...
Like the forum for #1I'm using debian 5.0 with a modem to connect to the internetand eth1 to network my home computers. When I try to browse the internet with Konqueror, I have to disable eth1 then wvdial just to browse the internet. How do I fix this?Note: My resolv.conf has my primary DNS address in it, for my ISP (nameserver 67.211.172.29) and so on.
View 2 Replies View RelatedI have a new Debian 5.04/ppc install on a G5 tower and it's not able to browse the local network. The clean install could see the network, then I installed the Samba server, and it hasn't worked since. Samba server never really worked, and I'm guessing I messed something up. I've reinstalled network-manager, and removed / reinstalled samba.
I have a small home network (6 machines) running wired and/or wireless, pc/mac and linux.This machine can PING other machines by name and IP address.This machine can PING itself by name and IP address
Other machines can PING this machine by IP address only, not by name.Nautilus network browser only shows the "Windows Network" icon, which, when clicked, shows an empty window.I've got networking up fine on all my other machines but this one is stumping me.
Just turned on my computer after being away for a month and I am unable to browse the web when connected using my ethernet card.Skype is able to work fine and I am able to ping my router yet both Iceweasel and Chrome are unable to connect to any websites. Apt-get did not work as well, and Chrome states that there is an error with the DNS lookup, which lead me to try:
# /etc/init.d/nscd restart
yet it didn't work. I am able to browse the web normally when connected using the wireless card.