Debian :: Getting ATI Mobility X600 3D Working
Mar 23, 2011
Leave "/etc/X11/xorg.conf" - EMPTY Turn KMS off in "/etc/modprobe.d/radeon-kms.conf" by changing the 1 to 0 And Voilah after a reboot Squeeze Started using the Mesa DRI R300 for OpenGl I also Have KMS Running after re-installing Squeeze (wont go into how that happened) I opted to not install libosmesa6 7.7 and it's gone fine with KMS enabled - I am Running Squeeze & I am Really at a Loss as to how to get My Hardware Rendering Going From What I can Gather what I need to do Now is make it so my system is loading the
"radeon/r300_dri.so "
$ glxinfo | grep rende
direct rendering: Yes
OpenGL renderer string: Software Rasterizer
Im running a Dell Latitude D810 With ATI Mobility X600 128Meg Card fglrx is completely UNinstalled althou under service settings fglrx-atieventsd was still there and ticked , I have it unticked currently I have these Installed
[Code]...
View 13 Replies
ADVERTISEMENT
May 3, 2010
I am having problems getting xrandr to work on my Thinkpad Z60m.I've tried different xorg configurations, but xrandr does not activate
dual screen mode to where I would have one large desktop. My clean xorg.conf after running xorgsetup is the following:
[code]...
View 10 Replies
View Related
Nov 3, 2010
I have with the Videocard of one of my laptops. This laptop has a Mobility Radeon X600 card (RV380 based). I always had 3D hardware acceleration with mesa (at least in Fedora 12 and 13), but now it doesn't work. Boot seems normal, but reviewing the logs, I see this in the Xorg.0.log (after loading the radeon modues):
[Code]....
I don't have hardware acceleration, so no compositing and no gnome-shell I tried with both 7.9.1 and 7.9.2 versions of mesa-dri-driver (and its libs). The xorg-x11-drv-ati version is 6.13.1-0.3.20100705git37b348059.fc14
View 6 Replies
View Related
May 1, 2011
I've got big problems with ubuntu 11.04 (32 Bit, on Lenovo T500 with ATI Mobility Radeon HD 3650)First of all i have to boot from the installation cd with the option "nomodeset".Also for the first boot from harddisk i have to set this option. After i have installed the proprietary ATI drivers i can boot with the default options but unity won't start....n dmesg i found following messages:Quote:
[ 415.901678] unity_support_t[2357]: segfault at 4 ip b76b2824 sp bfaeee50 error 4 in libGL.so.1.2[b7639000+c9000]
[ 415.905490] unity_support_t[2359]: segfault at 4 ip b75a1824 sp bfd3fa90 error 4 in
[code]....
View 2 Replies
View Related
Dec 20, 2010
When I put my laptop, a Presario X1000 to sleep that uses Radeon Mobility M7 LW [Radeon Mobility 7500], when it comes back up, I get just black and white "nosie" on the screen.
Even after I do cntr+alt+F1 and then cntrl+alt+F7 it still doesn't appear to restore the regular screen.
View 3 Replies
View Related
Jan 31, 2011
I'd installed Puppy and was very happy with the performance on my laptop, but I decided to switch to Debian because of the ap-get feature. I decided to go with JWM instead of one of the default desktop environments, but now I'm having to configure everything manually, and I'm pretty lost. So far, I've got X and JWM installed (though no graphical login, and have to startx manually).
Priority one is to update the video driver and get the best performance possible. I have an ATI Mobility Radeon 7500. I know the fglrx driver doesn't work with this card, but I don't know which package to install. When I type "apt-get install radeon", it spits out "E: Couldn't find package radeon"
View 12 Replies
View Related
May 23, 2011
I have just installed Squeeze on my laptap with a radeon mobility equipped laptop. When it boots, I see the following message:r600_cp: Failed to load firmware "radeon/RV635_pfp.bin".and some others, too, but it stalls at that point, and I cannot use CTRL-ALT-F2 to get a text-based prompt - in fact, I can only seem to get it back with a ALT-SYSRQ (R-E-I-S-V-B) sequence to force a reboot. It is a multi-boot system, with a windows partition, Ubuntu partition, and the new Debian partition. The Ubuntu and Windows partitions will still boot, only the Debian stalls.
When I boot into Ubuntu, I can see the Debian partition, and can see (for instance) the /var/boot/dmesg file, but it only says:"(Nothing has been logged yet.)"So, being new to debian itself (even though, I know, that Ubuntu has a debian base), how can I make it boot without X, which is I presume, the center of the difficulty? Can I change some file on the debian partition using Ubuntu to get the debian partition to boot in text only mode, and then try to fix the radeon driver?
Alternatively, can I put the proper files for the radeon driver *from* the Ubuntu partition *to* the debian partition and expect it to load and boot correctly? I did, at one point, download and install the proprietary ATI driver files on Ubuntu, so can I put them in a proper place on the debian install?
View 5 Replies
View Related
Jun 6, 2011
1- I'm trying to install the ATI Mobility Radeon HD 5470 driver over the non-free repository ...the problem is that until now i didn't found a recent documentation ...and to be honest i don't know which procedure should i use to rightly install the driver .
2- I have two graphic cards (integrated Intel with the i5 processor), and i can't change the default one to the ati! because debian had set the intel card as a native one...! that's why i´ m wondering if just an installation of the non-free drivers will solve this or not! I think every body will ask me how the lspci output looks like so here is it : 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
[Code]...
View 8 Replies
View Related
Apr 23, 2011
I'm using a regular PC not Laptop with ATI Technologies Inc RV380 [Radeon X600 (PCIE)] and Ubuntu 10.04 TLS.
I want to use compiz, so I installed it from Ubuntu software manager, but it is not working. After I understood that it is because of the graphics adapter I downloaded the driver for Linux x86 from ATI's web, and when I tried to install the .run file I got this:
Quote:
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.32-31-generic; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.ipeBWr
Also I installed Catalyst and it said something like no adapters installed.
I read some threads around here and understood that Ati no more provides drivers for Ubuntu 10.04 for my adapter.
View 14 Replies
View Related
Aug 21, 2010
I have come to the conclusion there is no way to adjust brightness for this iMac besides xgamma tweaking.Can someone explain why it is not possible?
View 1 Replies
View Related
Mar 19, 2010
I'm using two monitors with an ATI Radeon X600 card in Ubuntu 9.10. I got the duel monitors to work by running sudo Xorg -configure, but now my desktop effects don't work. How can I get them to work again?
View 6 Replies
View Related
Mar 11, 2011
I am having annoying problems with my fresh installation of Mandriva 2010.2. It uses the xorg-1.7.7 server for my ATI X600 mobility graphics card. (package: x11-server-xorg-1.7.7-1mdv2010.1) There are several - perhaps related, perhaps unrelated - problems:
Problem 1: Random lockups. The Xorg.0.log states:
[Code]....
View 10 Replies
View Related
Sep 20, 2010
I just put in an ATI Radeon x600 on my OpenSuse system I loaded last week. The Xorg log shows that it is using the Radeon module (driver). I am seeing colored/static rectangles covering the green wallpaper and when scrolling in Firefox. Does anyone know how to resolve this issue, and is this the driver I should be using?
View 3 Replies
View Related
Apr 2, 2010
know if it is possible to get an ATI mobility 4 driver for Ubuntu 9.10?
View 1 Replies
View Related
Jul 11, 2010
i want to implement different mobility models in ns2, but i can not it
View 2 Replies
View Related
Apr 13, 2010
I am trying to install and run Netmotion Mobility XE on my machine running Fedora 12, but so far I am having no luck.
View 3 Replies
View Related
Jan 24, 2010
i am gonna to buy a new noetbook hp probook 4510s one with ATI Mobility Radeon HD 4330 graphics card is that card compitable with fedora 12 ?
View 10 Replies
View Related
Apr 26, 2011
i want know how to link mobility file with tcl script? i tried with set val(sc) "test" but getting error message like
[root@localhost example]# ns box.tcl
setting initial variables...
setting other default settings...
removing unecessary packet headers...
[code].....
View 1 Replies
View Related
Feb 10, 2010
I just bought a new ASUS laptop with the Mobility Radeon HD 5470 card.It seems like there's no driver for it yet (the amd.com download wizard is a dead end because I only find the HD 4000 series).
Is there anything I can do to get support for this card? At least I'd like to be able to change resolution. Or do I simply have to wait for a new ATI driver?
View 3 Replies
View Related
Oct 23, 2010
we are considering to purchase a laptop that comes with the ATI Mobility Radeon� HD 5430 Graphics Card with 512 MB Ram but unable to get a test with a live cd know /using this card and can confirm that it is working okay with linux?
View 4 Replies
View Related
Nov 22, 2010
I remember when 11.3 first came out it was an issue.Are the fglrx drivers good now?
View 6 Replies
View Related
Nov 24, 2009
i am new to linux especially to openSUSE 11.2 . I have just installed latest openSUSE 11.2 on my lenovo t60 and when i start desktop effects KDE crashes non stop . After some googling i found that either the driver for Mobility FireGL V5250 is hidden very well or no one use this vga with desktop effects . I have tried using drivers for openSUSE 11.1 but the kde was barely running, everything was very very slow.
View 2 Replies
View Related
Jan 6, 2010
I have a problem with my graphic card. My desktop effects and compiz work fine, but I cant find xorg.conf file (it seems I dont have a driver installed??). I want to play games, but I cant (warsow, and other via wine).. my computer cant start a game.
View 9 Replies
View Related
Mar 6, 2010
installing ATI Mobility Radeon x1400 driver on 9.10?
View 9 Replies
View Related
May 23, 2010
I have an ATI radeon x1300 graphics card on my Toshiba Satellite A100 P542 laptop. I am new to ubuntu. On installation, I was pleased with the mac feel as I use mac at my home. I just cant get the card to work. In the hardware options, my card isn't displayed in proprietary thingy.
I later realised that my graphic driver is no longer supported by ATI and there are no official drivers. So I tried all the alternatives available in Ubuntu software centre. I currently have everything related to ATI, fglrx, xorg etc installed. But seems like all these things are of no use, as my graphics driver still isn't recognized and I cant use Compiz fusion. Leave alone compiz fusion I cannot run good quality videos. The screen gets sluggish when I do that.
View 9 Replies
View Related
Oct 11, 2010
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 3 Replies
View Related
Jul 19, 2010
Does someone have a magick trick to make this card runs well on linux lspci shows this:01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]Ive tryed the ati binaries and its very bad.It takes a delay to switch from window to window and when tryed to play video it plays in slow motion doesnt matter what I do.Some ideas?I dont want 3d things only a good 2d performance.
View 2 Replies
View Related
Aug 5, 2011
How to install SUMO software in Fedora 10. I am not able to get the steps required for installing SUMO in Fedora 10. Also I am not getting the libraries required for SUMO in Fedora 10. I am getting for Fedora 14 and 15. I want source for Fedora 10.
View 5 Replies
View Related
May 4, 2011
I've upgraded (reinstalled) from Slackware 13.1 to 13.37 on an old iMac and have problems with slow graphics.
lspci says this about the graphics card:
Code:
With Slackware 13.1 I had no KMS enabled and graphics speed was okay. It wasn't very good, but okay for everyday work. Now with 13.37 it's extremely slow. glxgears runs with only around 38 fps, no matter what I do. And every now and then when logging off, I get a black screen and no new kdm-login. But I can ssh into that machine and restart X by issuing 'init 3;init 4'.
KMS is enabled (I've also tried disabling it, but then KDE crashes right after logging in) and it's a fresh installation of 13.37 with a 2.6.37.6 kernel.
What can I do?
I have to admin I don't know this video and X stuff very well and I used to have machines with NVIDIA cards.
If there's anything else than the usual Xorg.0.log needed.
To me the log doesn't look like there's any problem whatsoever:
Code:
View 7 Replies
View Related
Nov 4, 2010
HP Compaq 6820s: During the installation of F14 I noticed that the system freezes for a while every few seconds. The installed and rebooted laptop behaves the same way. Disturbing repeated messages in var/log/messages:
Code:
Nov 3 18:20:22 localhost kernel: [ 512.589815] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
Nov 3 18:20:34 localhost kernel: [ 524.463172] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[Code].....
View 3 Replies
View Related
