Ubuntu Installation :: Get An ATI Mobility 4 Driver For 9.10?
Apr 2, 2010know if it is possible to get an ATI mobility 4 driver for Ubuntu 9.10?
View 1 Repliesknow if it is possible to get an ATI mobility 4 driver for Ubuntu 9.10?
View 1 Replieswho has installed these drivers on ubuntu will help me to install ? Because I can not coped...
ati mobility radeon x1400 driver
need me 32bit driver... I found only 64 ...
1- I'm trying to install the ATI Mobility Radeon HD 5470 driver over the non-free repository ...the problem is that until now i didn't found a recent documentation ...and to be honest i don't know which procedure should i use to rightly install the driver .
2- I have two graphic cards (integrated Intel with the i5 processor), and i can't change the default one to the ati! because debian had set the intel card as a native one...! that's why i´ m wondering if just an installation of the non-free drivers will solve this or not! I think every body will ask me how the lspci output looks like so here is it : 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
[Code]...
I have recently installed 10.04 on my Fujitsu E8210 laptop and now have a problem with the flickering and noisy screen. I have narrowed down the issue to my ATI mobility Radeon x1400 drivers and seen a suggestion to install Gallium3D drivers. Up 'till now I have installed new kernel from [url].
And now am looking for directions on how to install Gallium3D drivers for my video card.
I have a problem with my graphic card. My desktop effects and compiz work fine, but I cant find xorg.conf file (it seems I dont have a driver installed??). I want to play games, but I cant (warsow, and other via wine).. my computer cant start a game.
View 9 Replies View Relatedinstalling ATI Mobility Radeon x1400 driver on 9.10?
View 9 Replies View RelatedI'd installed Puppy and was very happy with the performance on my laptop, but I decided to switch to Debian because of the ap-get feature. I decided to go with JWM instead of one of the default desktop environments, but now I'm having to configure everything manually, and I'm pretty lost. So far, I've got X and JWM installed (though no graphical login, and have to startx manually).
Priority one is to update the video driver and get the best performance possible. I have an ATI Mobility Radeon 7500. I know the fglrx driver doesn't work with this card, but I don't know which package to install. When I type "apt-get install radeon", it spits out "E: Couldn't find package radeon"
I'm having some graphics driver trouble on my Lenovo Thinkpad T500. I tried getting the ATI Proprietary driver to work (fglrx) but everytime I boot my X just crashes. Now I'm trying to use the open source driver, but i dont think its working becaues a) It doesn't detect that an external monitor is plugged in (for dual-view) and b) when i run glxinfo i get a "Error of failed request: BadRequest" message.
View 3 Replies View Relatedi am new to linux especially to openSUSE 11.2 . I have just installed latest openSUSE 11.2 on my lenovo t60 and when i start desktop effects KDE crashes non stop . After some googling i found that either the driver for Mobility FireGL V5250 is hidden very well or no one use this vga with desktop effects . I have tried using drivers for openSUSE 11.1 but the kde was barely running, everything was very very slow.
View 2 Replies View RelatedI want to install graphic card driver - where can i find it and how can I do that.
View 3 Replies View RelatedI'm having an issue and I'm trying to figure out if the proprietary driver from ATI is actually getting installed correctly or if I'm on the open source driver still. ...and whether or not there's an advantage to one over the other...
I'm on a Sager NP3790 with an ATI Mobility Radeon 9700 graphics card. I've got a fresh install of Ubuntu 10.10 and the basic 2d functions all seem fine, but any games I try to run with OpenGL simplt fail and "glxinfo" yields:
Error: couldn't find RGB GLX visual or fbconfig
lspci -k yields:
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
Subsystem: CLEVO/KAPOK Computer Device 0471
Kernel driver in use: radeon
Kernel modules: radeon, radeonfb
I have downloaded the latest legacy driver from ATI (ati-driver-installer-9-3-x86.x86_64.run) and I've not had any success running that directly. It appears to not knowingly support anything newer than Ubuntu 9.04. I have tried forcing that driver to build itself targeting 9.04 and I've tried installing the .deb packages that it produces, but with no luck there either.
If I recall this laptop's former lives, it has in the past run Eternal Lands without issue back when it was Ubuntu 8.x, but somewhere between a client update from them, some update from ATI or Ubuntu I seem to have lost my OpenGL capabilities.
When I put my laptop, a Presario X1000 to sleep that uses Radeon Mobility M7 LW [Radeon Mobility 7500], when it comes back up, I get just black and white "nosie" on the screen.
Even after I do cntr+alt+F1 and then cntrl+alt+F7 it still doesn't appear to restore the regular screen.
I've got big problems with ubuntu 11.04 (32 Bit, on Lenovo T500 with ATI Mobility Radeon HD 3650)First of all i have to boot from the installation cd with the option "nomodeset".Also for the first boot from harddisk i have to set this option. After i have installed the proprietary ATI drivers i can boot with the default options but unity won't start....n dmesg i found following messages:Quote:
[ 415.901678] unity_support_t[2357]: segfault at 4 ip b76b2824 sp bfaeee50 error 4 in libGL.so.1.2[b7639000+c9000]
[ 415.905490] unity_support_t[2359]: segfault at 4 ip b75a1824 sp bfd3fa90 error 4 in
[code]....
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 4 Replies View RelatedI have just installed Squeeze on my laptap with a radeon mobility equipped laptop. When it boots, I see the following message:r600_cp: Failed to load firmware "radeon/RV635_pfp.bin".and some others, too, but it stalls at that point, and I cannot use CTRL-ALT-F2 to get a text-based prompt - in fact, I can only seem to get it back with a ALT-SYSRQ (R-E-I-S-V-B) sequence to force a reboot. It is a multi-boot system, with a windows partition, Ubuntu partition, and the new Debian partition. The Ubuntu and Windows partitions will still boot, only the Debian stalls.
When I boot into Ubuntu, I can see the Debian partition, and can see (for instance) the /var/boot/dmesg file, but it only says:"(Nothing has been logged yet.)"So, being new to debian itself (even though, I know, that Ubuntu has a debian base), how can I make it boot without X, which is I presume, the center of the difficulty? Can I change some file on the debian partition using Ubuntu to get the debian partition to boot in text only mode, and then try to fix the radeon driver?
Alternatively, can I put the proper files for the radeon driver *from* the Ubuntu partition *to* the debian partition and expect it to load and boot correctly? I did, at one point, download and install the proprietary ATI driver files on Ubuntu, so can I put them in a proper place on the debian install?
I installed Fedora 11 on my HP Pavillon ze5000 laptop that according to Windows has "ATI Mobility Radeon" video. Words on the screen are not readable because words are moving arouInd on the screen very fast (I think horizontally back and forth by a dozen pixels or so).
View 1 Replies View RelatedCan I use the current FGLRX drivers with a Mobility Radon X2300 card on an HP6910p with Lucid?
View 2 Replies View RelatedI have an ATI radeon x1300 graphics card on my Toshiba Satellite A100 P542 laptop. I am new to ubuntu. On installation, I was pleased with the mac feel as I use mac at my home. I just cant get the card to work. In the hardware options, my card isn't displayed in proprietary thingy.
I later realised that my graphic driver is no longer supported by ATI and there are no official drivers. So I tried all the alternatives available in Ubuntu software centre. I currently have everything related to ATI, fglrx, xorg etc installed. But seems like all these things are of no use, as my graphics driver still isn't recognized and I cant use Compiz fusion. Leave alone compiz fusion I cannot run good quality videos. The screen gets sluggish when I do that.
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 3 Replies View RelatedLeave "/etc/X11/xorg.conf" - EMPTY Turn KMS off in "/etc/modprobe.d/radeon-kms.conf" by changing the 1 to 0 And Voilah after a reboot Squeeze Started using the Mesa DRI R300 for OpenGl I also Have KMS Running after re-installing Squeeze (wont go into how that happened) I opted to not install libosmesa6 7.7 and it's gone fine with KMS enabled - I am Running Squeeze & I am Really at a Loss as to how to get My Hardware Rendering Going From What I can Gather what I need to do Now is make it so my system is loading the
"radeon/r300_dri.so "
$ glxinfo | grep rende
direct rendering: Yes
OpenGL renderer string: Software Rasterizer
Im running a Dell Latitude D810 With ATI Mobility X600 128Meg Card fglrx is completely UNinstalled althou under service settings fglrx-atieventsd was still there and ticked , I have it unticked currently I have these Installed
[Code]...
i want to implement different mobility models in ns2, but i can not it
View 2 Replies View RelatedI have ubuntu on a Vaio VGN-A290 with the ATI Mobility Radeon 9600 M10 graphics card. I I installed the Eternal Lands client but it keeps crashing on me. Upon crashing a massage told me that I should make sure the video drivers are up to date. I then went into system --> Administration --> Hardware drivers and it says "no proprietary drivers are in use on this system." So my question is how do I install a driver for the ATI Mobility Radeon 9600 M10?
View 5 Replies View RelatedI am trying to install and run Netmotion Mobility XE on my machine running Fedora 12, but so far I am having no luck.
View 3 Replies View Relatedi am gonna to buy a new noetbook hp probook 4510s one with ATI Mobility Radeon HD 4330 graphics card is that card compitable with fedora 12 ?
View 10 Replies View Relatedi want know how to link mobility file with tcl script? i tried with set val(sc) "test" but getting error message like
[root@localhost example]# ns box.tcl
setting initial variables...
setting other default settings...
removing unecessary packet headers...
[code].....
I'm running Ubuntu 9.10 on an oldish IBM Thinkpad X32 (12.1in 1024x768 LCD, 16MB ATI Radeon). On the initial install of 9.10 I couldn't get any higher resolutions working, following the instructions in [URL]..
1024x768 resolution is running ok but some graphics are noticeably slow - a prime example is the "File Browser", switching from one app to this app, you see a grey window for a second, and then finally the File Manager displays.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Screen "Screen0"
InputDevice "Mouse0" "CorePointer"
[Code]...
I currently have a Hp NC8430 laptop running 10.04 and this one is amazing and love it, but my video card wont allow me to hook up an external monitor. I can enable compiz, but nothing else. When i install the ATI driver from the website for catalyst it allows the external monitor to work, but now compiz wont work? I dont understand what i am doing wrong and would like if someone could help me. My Video car is a ATI mobility Radeon x1600 and is not supported anymore which sucks so if anyone knows of where to get opensource drivers that would be awesome or a way to set this up. I would hate to have to use another distro, but i need external support.
View 8 Replies View RelatedI have installed the fglrx driver from "Hardware Drivers" and it runs fine, until I launch gnome3 or gnome-shell, it then just locks X (its not hard locked, I can CTRL + ALT + 2/3 etc out) but I cant do anything else.
If I use the mesa / xorg driver its fine.
The trouble is I play one game, and I need the fglrx driver for that game, the mesa one corrupts the 3d engine
It wouldnt be a pain, but i am one of the few who seems to find gnome-shell an improvement, and I get really frustrated when it wont work.
Any idea's on what I can try, other than hopfully having a working system when ATI launches the 10.10 driver on its website (although the leaked rc had the same issue) I only recently got a ATI card so I am pretty new when dealing with the ATI cat's.
Installed Ubuntu 10.10 on fresh HP dm4-1050so laptop and encountered problems, this is one of them. Noticed that ATI card is heating heavely with default installation and I would like disable it and switch to use Intel's GMA. Also tested ATI proprietary fglrx driver through Administration->Additional Drivers, after booting got empty screen so I switched back. Afterwards read from documentation that 5450 is not supported, so no wonder. So what is the simplest way of disabling ATI and using only Intel's gma? Here's what I got with lspci -v:
Code:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 1469
Flags: bus master, fast devsel, latency 0, IRQ 45
Memory at c0000000 (64-bit, non-prefetchable) [size=4M]
[Code]...
I'm having problems with my graphics. I have ATI mobility radeon hd 3650 and I get an issue with desktop effects. They can't be enabled even though the card is supported. I had some trouble with installation and used this thread's instructions: http://ubuntuforums.org/showthread.php?p=9133906. I finally seem to have it installed and configured but I still can't use desktop effects. Also this whole process started because I couldn't get minecraft working getting the GLX13 error.
View 1 Replies View Related