I tried to install Debian-Squeeze 64-bit from CD [URL] as I thought mistakenly my cpu has 64 bit support. Ofcurse proccess stoped as the kernel wasn't compatible, but only when I removed the 'quiet' parameter I could see the error, when the 'quiet' parameter was passed, process gave no visible error,just stop in the start screen of debian-installer.
View 1 RepliesI downloaded skype 2.2 .deb package on the skype website and tried to install it via sudo dpkg -i skype-debian_2.2.0.25-1_i386.deb and got the following errors:
[code]...
What does the error mean? I am guessing I have a faulty package. old skype can't be used due to segmentation fault error, so I am really hoping for the new upgrade to solve my skype problem.
I want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View RelatedWhen installing squeeze from either a dvd or cd (i've burned loads to see if it was the problem) my computer goes through the installation, until the dreaded step of "selecting and installing software" where the installation stops, and my computer turns itself off because of a kill signal sent to everything. I've tried booting with fb=false, and for some reason acpi=off, and neither of them solved the problem (acpi=off caused my laptop to turn off unexpectedly earlier) (HP 6735s, AMD64 using Turion X2, 4GB Ram)
View 4 Replies View RelatedI am running lenny on my PC ( amd 64 / nvidia graphic ) without any problems. Since last week I tried to change to squeeze - without success. First step - update from lenny to squeeze accordingly to the upgrade description from the Debian homepage. After nearly 2 hours without any error message - Result : System dosen't boot after upgrade.
So I went back to lenny and tried the second step to get Squeeze working. I got the DVD "Debian-6.0.0-amd" and started the installation. After the second screen the keyboard is no longer identified and I cannot go on with the installation.
I am trying to install Squeeze (Debian 6.0.2), KDE environment, desktop PC, older 32-bit single CPU, 40 GB hard drive wholedisk, 2 GB RAM). I am trying to install an encrypted hard drive (takeover installation using entire hard drive).
Each time I try this I seem to run into different problems, and to date I have not succeeded in obtaining graphical installation. My most recent previous thread on my problems is at
viewtopic.php?f=17&t=67113
It contains video controller hardware information. (In that thread I mentioned a desktop and a laptop; I am currently trying to install Squeeze on the desktop PC, not the laptop!)
It seems I will need to request using apt in the shell the Squeeze package firmware-linux-nonfree. I am not familiar with configuring apt from the command line. Can anyone just tell me what I need? (I have many other things I am trying to learn today, so RTFM would not be helpful in this instance.) I am hoping apt will be autoconfigured well enough to get the deb if I simply give the command. Would it be
apt-get install firmware-linux-nonfree
I want to ensure before trying to get apt to install debs over the internet that the key-signing and package verification is working. I hope that all is done automatically by the installer, but does anyone know with certainty? I stress that (as I understand things) checking the GPG signature of a signed deb is different from and complementary with checking the integrity hash; both verifications are crucially important. The reason I ask is that at least under oldstable (Lenny) there was a separate debsig package, which seems to imply that apt does not automatically acquire the ability to check the GPG signature of signed debs.
Someone said that in addition to non-free drivers I might need to obtain firmware. I have never been able to do this successfully, probably because hardware sites assume Windows users and I don't use Windows at all.
I am setting up 4 laptops that are all the same make and model with 64bit squeeze.What is the best way to setup the master laptop? LVM?
Once the master is all configured how we need, what is the best way to clone it to the other laptops? Once all the laptops are cloned what is the best way to refresh or update the other laptops from the master laptop?
I try to update the packages before upgrade to wheezy,looks like when I run apt-get update,it shows error as per below:
W: GPG error: http://fosiki.com stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 379393E0AAEE96F6
rat:~# apt-key adv --keyserver keyserver.fosiki.com --recv-keys 379393E0AAEE96F6
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --
[code]....
I have done a update from Lenny to Squeeze with the update manager within Gnome. And there was a error 126 and the update broke off leaving me with a non working system. The system does start into Debian Squeeze to the command line. Users are in place and a login is possible. X does not work and there a lot of broken and defect packages. I want to repair my system. Is a restore without losing the configuration possible?
View 14 Replies View RelatedI have Debian Squeeze AMD64 bit release. It finds my wired ethernet connection and ues itfine, although nothing shows up in the top right corner under the networking icon.
When I plug my mobile phone in (HTC S620) it always uses this as the main internet connection and then even if disconnected wont use my wired connection until I reboot.
Is there a way to stop it doing this or at least have my wired connction as an option so I can just click to reconnect to my ethernet connection?
I cannot count how many times I have re-installed squeeze, and do all kinds of fixes to grub, but no joy. Every time, there is this ntoskrnl.exe error, and to re-install it. I thought my WIN XP may be corrupted, so I reinstalled it, and updated it with sp3 and all updates. Then I re-installed squeeze (reformatting all partitions). At the end, the installer ask if I want to install grub to mbr. I replied yes. After reboot, only the 2.6.32.3-amd64 and the recovery kernels show up on the grub screen, no winxp.OK, I booted into squeeze kernel and looked at the /boot/grub/grub.cfg file, and there winxp is not included in /etc/grub.d/30_os-prober section. In terminal, I typed
#os-propber and it found winxp in /dev/sda1
then I typed
#update-grub
and now /etc/grub.d/30_os-prober now show winxp.I rebooted, and winxp shows on the grub screen, and I chose winxp.It came back with "ntoskrnl.exe ...error... re-install ntoskrnl..."Here are the details:
fdisk -l
root@SHUM-AMD64:/home/shum# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
[code]....
This is my specific solution to my specific problem. After updating to Squeeze from my prior Lenny distro (amd64 with whole disk encrytion using LVM2, dm-crypt, LUKS) everything went well - at first. I was duped like so many, thinking that all was well and I could remove the legacy-grub (aka: Grub1) and just use grub-pc (aka: Grub2). As soon as I removed the legacy-grub and rebooted my laptop, I was confronted with:
GRUB Loading stage1.5 GRUB loading, please wait..Error 15 At this point I wasn't sure if it was a Grub problem or a deeper encryption problem - especially after reading that some people had missing packages in Squeeze (lvm2, dm-setup, initramfs-tools, etc.)
Okay, the solution for me.
1. download and burn to disk: debian-live-6.0.0-amd64-rescue.iso[URL]..
2. scroll to and press enter/return on: text rescue
3. choose a root directory - for example: /dev/blah/root (I wrote down the list of possible /dev/.... for reference - this helped me remember where and what I had partitioned in Lenny)
4. choose: Execute a shell in /dev/blah/root
5. once in the shell, I discovered I needed to mount a few of those partitions that I had written down in order to get access to grub-probe, update-grub, grub-install, etc. You may not have to if your partitions are minimal. I you need to use other partitions, type (for example):
[Code]...
I was upgrading from lenny to squeeze. At the apt-get dist-upgrade step, at some point (after upgrading and configuring) it tried to create a new certificate for my mail server but creation of the certificate failed, dpkg reported an error and the whole process exited with error. So I rebooted the machine and issued again apt-get dist-upgrade but now the certificate was created successfully . After that it upgraded mysql-client and the process finished.
But I don't know if configuring of the upgraded packages has stopped at the point where dpkg stopped. I suppose so, because very few packages were configured at that point. Is the solution to run dpkg-reconfingure -a (or -u ?) or dpkg --confingure -a or something else ? (dpkg has the PACKAGE STATES)
dpkg --configure --pending gives me no package for configuration.PS: At least I hope that all packages were upgraded and a few were not configured. Is there a way to confirm that all packages were upgraded ?
I have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort.
2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install.
3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files.
4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
I'm a C/C++ Programmer and i need to write, compile and execute programs. I've heard gcc is good for this. But for the life of me i can't figure out how to download and install it.
View 13 Replies View RelatedI have been asked to install Windows 7 on a computer that groans to even run Windows xp properly. As I know, this is like asking for the impossible, I am posting here to have some opinions about the use of Wine in Debian. In particular, I would like to know whether wine makes Debian less secure and more vulnerable to viral, malware, adware, etc infections.
View 1 Replies View RelatedIs it possible to somehow install Debian on-top of Ubuntu (Lucid Lynx)? I would just install Debian, but I am limited to a wireless connection. And currently a live wire connection is just not an option.
View 13 Replies View Relatedinstaller: jre-6u25-linux-x64.bin
extracted in /usr/java/
now, how do i make it recognized by iceweasel?
the reason of me using it instead of openjdk is that i need newer jre for IBM bladecenter manager web interface.
I've tried a few threads about install flash and haven't found the correct one.What is the correct way to install Flash on Debian Squeeze 64bit?
View 14 Replies View RelatedNow I can't install skype:
Code:
dpkg -l | grep skype
root@V-Desk:/home/ventsy#
aptitude install skype
E: Failed to fetch cdrom:[Debian GNU/Linux 6.0.1a _Squeeze_ - Official i386 DVD
[Code]....
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
I've been on numerous websites--with tutorials telling how to install the ATI drivers, I'm running Squeeze 6.0.1 Gnome amd64, the tutorial I am using is located at the ATIProprietary Debian Wiki [URL] when I try the following:
sudo apt-get install fakeroot debhelper build-essential libstdc++5
I get this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package fakeroot is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source.
Package debhelper is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package 'fakeroot' has no installation candidate
E: Package 'debhelper' has no installation candidate
E: Unable to locate package build-essentials
E: Unable to locate package libstdc++5
E: Couldn't find any package by regex 'libstdc++5'
I have a feeling that apt-get is not searching the web, yet searching a CD perhaps? Because when I've tried the apt-get update, I get the following:
Ign cdrom://[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110324-08:54] squeeze Release.gpg
Media change: please insert the disc labeled
'Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110324-08:54'
in the drive '/media/cdrom/' and press enter
After doing that, nothing happens, and my apt-get still doesn't work, everything I try and install like build-essential says it's not found. Also when I
su
nano /ect/apt/sources.lst
the list in nano is empty???
I'm currently running a dual boot with windows xp/debian but as soon as I can get everything working, I'm going to turn this into a full linux system. Also my sound doesn't work, but my sound is HD sound that goes via the video card, I have it hooked up HDMI to my LG tv/monitor, sound works fine on xp. I think once I get the video card drivers installed it should possibly fix my sound issues at the same time.
Just done a Debian Squeeze install after being sick-to-death of Ubuntu crashing. I have tried several different browsers, and all of the have an annoying scrolling action when I scroll down the page.As it's not browser specific, can I assume it's something like X-windows? This is annoying enough to get me to use another distro.
View 3 Replies View RelatedI think about editing and compressing some avi files and want to install cinelerra-cv. However there are some dependency problems it seems...
aptitude install cinelerra-cv cinelerra-doc cinelerra-cv-data
The following NEW packages will be installed:
cinelerra-cv cinelerra-cv-data cinelerra-doc libavcore0{a} libavutil50{a} libfaac0{a} libmjpegtools-1.9{a} libmp3lame0{a} libmpeg3-1{a} libmpeg3hv-1.5.0-1{a} libquicktime1{a} libquicktimehv-1.6.0-1{a} libva-x11-1{a} libva1{a} libx264-112{a} libxvidcore4{a} mpeg3-utils{a} ttf-bitstream-vera{a}
The following packages will be upgraded: libavcodec52 libpostproc51 libswscale0 3 packages upgraded, 18 newly installed, 0 to remove and 5 not upgraded. Need to get 16.5 MB of archives. After unpacking 31.5 MB will be used. The following packages have unmet dependencies: libavformat52: Depends: libavcodec52 (< 4:0.5.2-99) but 5:0.6.1+svn20101128-0.2 is to be installed. or libavcodec-extra-52 (< 4:0.5.2-99) which is a virtual package. The following actions will resolve these dependencies:
[code]....
Normally I say yes and hope for good, but this time... I do not use adobe flash player, but I would still like to watch ..... videos. Would be hard without gnash, right? I use iron portable and iceweasel. Also I use totem a lot, but aptitude seems not being able to resolve this inconsistency automatically. My question is: what would happen, if I just say "y"? gnash is completly away? And is there any way to install newer version of gnash or do whatever to have everything working?
Was wondering if I can upgrade my kernel to squeeze without affecting or hurting my Lenny system?
I want to upgrade the kernel, but leave the system as stable lenny
I know the more recent kernels have better wireless detection,etc
I'm trying to install Debian Squeeze (net install CD) on a PC with an EX100 wireless keyboard and mouse. The system starts the install without any problem, and the keyboard works up to the first blue menu on the Debian installer then stops - the system fails to respond to any key presses.
The mainboard of the system is an Asus M2N68-AM SE2, keyboard / mouse receiver is plugged into one of the USB ports on the back.I've managed to install Ubuntu without problem on this system so I know the PC and keyboard are working fine.
I am installing Wheeze using netinstall.
After the partition step, the installation gives me the following error: Debootsrap Error.
Invalid Release file: no entry for main/binary-amd64/Packages
I have tried several iso's with several cd's but nothing is working.
Could someone give me the steps to installing/enabling the newest Flash 10 in Debian Testing/Squeeze?I want to install via the steps one would do from Adobe's website.IT DOES NOT WORK.IT DIDN'T WORK FOR ME.I just want to install the routine way that is usually done in Linux but when I downloaded it, I was asked to extract it and I have no idea where it got extracted to.Can anyone help?I don't mind starting from scratch.I don't remember how to do this method.I'm used to the 'non-free' package in the repo but Flash 10 is no longer working so I want to use the 'sure' method.
View 5 Replies View RelatedI want to remove pulse and install alsa instead but I can't seem to be able to do it. I tried to search for all packages with "pulse" in their names and purging them but it didn't work because aptitude wanted to remove all of the packages that used pulse with along with pulse.
View 2 Replies View Related