I am trying to launch the perl config, but when I do so I can an weird error.It seems to be that it does not regonize perl ?
conf.pl: line 11: =: command not found
conf.pl: line 19: my: command not found
conf.pl: line 20: syntax error near unexpected token `{'
[code]...
I am new here and want to lern CentOS. Current I have installed CentOS 5.5 x64 and Perl 5.8.8. Now i have install Perl 5.12.1 which located to /usr/local/bin/perl. But how I can move it to /usr/bin/perl so root based on Perl 5.12.1?
View 7 Replies View RelatedI recently reinstalled the B module for perl. Now I found out it didn't just do that, it installed a whole new copy of perl into /usr/local/bin/perl. When I type 'which perl' at the terminal, it says '/usr/local/bin/perl' instead of '/usr/bin/perl'. Normally, this wouldn't bother me. But I installed the one in local/bin without threading support. The one that comes with the system already is build with threading support, which is why I want to switch back to the system perl, and possibly remove the one in /usr/local/bin.
So how do I change it so that the result of 'which perl' returns as '/usr/bin/perl'? And what do I have to do to remove /usr/local/bin/perl?
The reason I need threading support is because I'm designing a file copier that copies several chunks of a file simultaneously to speed up the copying process. Guaranteed a useful script if it works.
I'm new in perl programming and linux OS. What is the difference between perl and perl-devel? What does mean devel? Iwant to install Catalyst and before install as required I have to check if make, gcc and perl-devel are installed in my system. make and gcc are installed. But I have to install perl-devel. First I searched for make, gcc and perl-devel in YAST Software Management and search did not find perl-devel. I visited the software.opensuse.org and wrote "perl-devel" and searched. The result was many similar zips with a prefix perl-devel and I can not choose one for needed perl-devel.
[Code]...
I am trying to setup the wlan access for my Fedora 9 system. I installed ndiswrapper. But when I run
Code:
ndiswrapper -l
i am getting the error
Code:
/usr/bin/perl: symbol lookup error: /usr/bin/perl: undefined symbol: PL_use_safe_putenv
I am unable to run perl-cgi script in my cent os Apache server. I have used locate perl command in terminal window and it gives following result:
[code]....
tell which is the path to perl for example "usr/bin perl"
I have a small problem with Perl and Apache.
If I use "#!/usr/bin/perl" in the beginning of a perl script the script won't work if the script is at all complicated. Simple scripts like "Hello World" works.
But if I use "#!/usr/bin/perl -w" in the beginning all scripts work?
If I don't use the -w this is whats in the logs:
(2)No such file or directory: exec of '/home/test.net/html/cgi-bin/uh/meny.pl' failed
Premature end of script headers: meny.pl
When I use the -w in the script the error-log shows me this.
meny.pl: Name "main::http_path_cgi" used only once: possible typo at /home/test.net/html/cgi-bin/uh/meny.pl line 24.
I'm getting the following error when I'm trying to install from 'testing' repo. E: Could not perform immediate configuration on 'perl' I'm doing apt pinning to install XFCE 4.8 on Squeeze. I've already added all the necessary sources and my /etc/apt/preferences file looks like this.
Package: *
Pin: release a=testing
Pin-Priority: 400
Package: *
Pin: release a=unstable
Pin-Priority: 300
Here is what I'm trying to install.
apt-get -t testing install xfce4 xfdesktop4 xfce4-power-manager xfce4-screenshooter xfce4-notifyd thunar thunar-archive-plugin thunar-media-tags-plugin thunar-thumbnailers gvfs-backends gvfs-bin gvfs-fuse xfce4-mixer xfburn terminator
I am on a friend's box and we are atm transitioning from stable to sid on his box. Instead of doing the whole thing at one shot via update-manager we are doing it using the apt tools. Now while upgrading, I'm not able to update any of the perl 5.12 packages, perhaps due to circular dependencies or what. This is the error I'm seeing :-
$ sudo apt-get install perl
[sudo] password for shirish:
Reading package lists... Done
[code]....
I'd like to build a .deb file which will contain my Perl program. I just want it to be deployed with dpkg -i on debian systems later. So it's just a matter of having the good arborescence in my .deb package. For that purpose, in the debian/rules file, I'm declaring some dh_install lines in the install rule.
My issue is that I know how to achieve my goal, but only with writing a ton of dh_install lines (one line, for one file...)
example :
clean:
dh_testdir
dh_clean
install: build
[Code].....
Can anyone provide me information about installing perl modules using CPAN.....
View 1 Replies View RelatedI'm trying to write a Perl script that will convert text to ASCII. I'm particularly interested in converting files created with MS Windows, so I used Notepad to create a few test files.
I have had some success with the following script:
[[ Script Deleted -- see subsequent posts ]]
After coming back /home/ to Debian, I used file to examine the file types:
$ file ansi.txt unicode_big-endian.txt unicode.txt utf8.txt
ansi.txt: ASCII text, with CRLF line terminators
unicode_big-endian.txt: Big-endian UTF-16 Unicode character data, with CRLF line terminators
unicode.txt: Little-endian UTF-16 Unicode character data, with CRLF, CR line terminators
utf8.txt: UTF-8 Unicode (with BOM) text, with CRLF line terminators
After running:
$ uni2ascii.pl -i ansi.txt -c ASCII -o new_ansi.txt
$ uni2ascii.pl -i unicode_big-endian.txt -c utf16 -o new_unicode_big-endian.txt
$ uni2ascii.pl -i unicode.txt -c utf16 -o new_unicode.txt
$ uni2ascii.pl -i utf8.txt -c utf8 -o new_utf8.txt
Everything appears good:
$ file new_ansi.txt new_unicode_big-endian.txt new_unicode.txt new_utf8.txt
new_ansi.txt: ASCII text
new_unicode_big-endian.txt: ASCII text
new_unicode.txt: ASCII text
new_utf8.txt: ASCII text
But the "little-endian file" does not convert properly:
$ md5sum new_ansi.txt new_unicode_big-endian.txt new_unicode.txt new_utf8.txt
c4def7932bc151b9e786b6ca1299162c new_ansi.txt
c4def7932bc151b9e786b6ca1299162c new_unicode_big-endian.txt
5b62a013dced4f2c2c0af45ea6388c1e new_unicode.txt
c4def7932bc151b9e786b6ca1299162c new_utf8.txt
When I use cat to print the new_unicode.txt file in an Emacs terminal, a ^@ appears on the last (empty) line. When I open the new_unicode.txt with KWrite, a warning message tells me that the file is a "binary" and "saving it will result in a corrupt file."
I have a directory of orchestral music .ogg files from a family member. Each track is from a different artist and the CDDB entry adds a ":" character after the artist name in the track title.
Here is an example of what I am referring to:
Code: Select all13_-_Mozart:_Sonata_in_A_major_KV_331.ogg
I would like to parse file names in any given directory and search for the string Code: Select all: and replace it with Code: Select all_ According to this post on stackoverflow, I can use Perl to accomplish this task. I've tried Code: Select allperl -i.bak -pe 's/:/_/' but since I am still learning Perl I'm probably commiting a PEBKAC error.
How would I go about solving this issue with regular expressions using Perl?
As I mentioned on another thread, I have 2 Ubuntus - Jaunty and Meerkat - as separate drives on my secondary IDE channel. I am removing Jaunty. Meerkat blows it away. And is certainly my preferred OS. However I am looking for a replacement for Jaunty that is more flexible in certain key areas than Ubuntu appears to be.I dont want to be restricted to Debian versions of things like Perl, MySQL, PHP and others. I can run LAMPP, but I would prefer to compile and have the versions of my choice as part of a main test system (apart from Meerkat that is).
I have had enough nightmares in Jaunty with things getting broken and spiralling out of control. I want a distro that doesnt rely on the GUI and its attendant utilities, but can run them when called. Meerkat is stable and has resisted me breaking it so far, but I do not want to push my luck. I have too much time invested in it. I intend to use Meerkat as my primary system on the machine, but want an alternative to *PLAY* with.
Funny problem just began occurring in Debian Lenny.
If I use Konqueror to start Konsole (by pressing F4) and then run:
perl -le '{print "hello"}'
The result is:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
hello
If I start Konsole directly, I do not receive any such errors.
I have debian squeeze (and a bit of sid, actually). I wanted to install the newest pidgin, so I added at sources.list the sid repository, and tried to install pidgin, but it needed the newest perl-base 5.12.3-6 (from 5.10.1-17). So I let it upgrade. after that I realized that my mysql server isn't running, and actually this is my problem. So I tried reinstalling it, home:/home/amalia# apt-get install mysql-server-5.1. Reading package lists. Done Building dependency tree Reading state information. Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies:
[code]...
I have been tearing my hair out with this. As part of a backend perl script i am holding the Epoch time as session data using apache session and mysql so i can delete sessions after an expiry period. When I retrieve the time it is about three months old even when i only just set it. The code example below best describes the problem:
View 5 Replies View RelatedI am using Fedora 11 and am interested in starting to use perl. Does Fedora 11 come with perl? If so, how do I invoke it? If not, what is the usual (popular) way of installing and running perl on Fedora 11?
View 2 Replies View RelatedTo install BackupPC I need :
XML::RSS - allows the web interface to use RSS. Nice if you want backup notifications via RSS.
But I cannot find this perl-module in the repo's via yum.
Quote:No package perl-XML-RSS available.
how to install perl-5.8.4.tar.gz in opensuse-11.4. am unable to install it
View 5 Replies View RelatedHow do I use a perl module? Am I suppose to call it from the terminal?
View 2 Replies View RelatedI just downloaded Tk-804.028 and try to install it (according to the README.linux) but I get:
> perl Makefile.PL
/opt/ActivePerl-5.10/bin/perl-static is installed in /opt/ActivePerl-5.10/lib okay
PPM for perl5.010001
Test Compiling config/perlrx.c
Test Compiling config/pmop.c
Test Compiling config/pregcomp2.c
[code]...
Any recommendations on what Perl tutorial to use?
View 1 Replies View RelatedI Installed perl-doc in ubuntu 10.04 using sudo apt-get install perl-doc,in the same way I installed doc for postgreSQL. How to use perl-doc so that I can get from perl-doc.
View 2 Replies View RelatedI want the output of this file to be in a column, not next to each ohter. I tired putting a a newline escape character in a few places, but it breaks the script. It is easy in awk, just ls -ltr | awk '{print $8 }'
casper@casper-laptop:~$ pwd
/home/casper
casper@casper-laptop:~$ ls -ltr > /tmp/outfile
casper@casper-laptop:~$ cat -n /tmp/moreawkreplace
1#!/usr/bin/perl
[Code].....
I am going to install perl GD. But when I run yum, it prompted no such packages.
Code:
# yum install perl-GD
Loaded plugins: refresh-packagekit, rhnplugin
Setting up Install Process
No package perl-GD available.
[Code]....
May I know if these two packages were merged or replaced by others? How can I get them installed?
Why is it so, when everything can be done by using shell? Why people use Perl and in which applications?
View 2 Replies View RelatedI am taking an input from the user for free and Used capacity in a disk. I wish to convert Input entered in MBTB to GB and this is how i am doing it.
Code:
<some code>
print "Enter Total disk space";
$tot = <STDIN>;
convert($tot);
[code]...
how do i pass the value of conv[0] after conversion back to $tot or $use such that they contain only value which is in GB?
I really would like Perl Qt4 bindings. The best I could find is this:[URL]The problem is that the sources would not compile, and the RPMs are for 32-bit machines.Is there really no such thing as good Perl Qt4 bindings?
View 8 Replies View RelatedI am a newbie on linux and just searching everything about perl scripting and modules nearly 3-4 days. I need a perl script but one of not easy to find on searching google. Okay now I need a perl script which create or recreate (edit) id3 tags (artist, comment, album, year, cover) of mp3 files stored on my linux centos server. I installed MP3::Tag version 1.13 pearl module to my server. I Searched tutorials about how to use it, finally I get through reading id3 tag of mp3 file but not achieve to modify it or create a new id3tag.
These are the details:
I have a mp3 file called 1.mp3 this script will process that '1.mp3' file read its id3tag if there is one, than modify or create id3tag for it by my fix artist name for example:
'1.mp3' files id3 tag details are like this
Artist: Dj xx
Year:2010
Title:yyyyy
Comment:eerwer
Cover: x.jpg
Now via this perl script which uses MP3::TAG I will change it's
artist as YYY
Title:ttt
Comment:cool
Cover:t.jpg
these are gonna be my fixed values. I mean all '1.mp3' file will have same artist based on script value.
The reason of this script is I will share Dj podcasts on my server and Dj's would have upload their mp3's which has got different id3 tags and cover pics. etc. I want to create more organized podcasts of them by the way I would trigger this perl script via Cronjob.