Debian Configuration :: Sorting When Locale Is Set To UTF-8 In Squeeze?
May 6, 2011I have a problem with sorting when locale is set to UTF-8 in Squeeze. Example:
echo -e "Ä…
a
b
c
[Code].....
ADVERTISEMENT
Debian Configuration :: Cannot Change Locale
Jul 12, 2015I have setup a VPS @ Strato with Linux Wheezy.Since I'am in the Netherlands I got a Dutch language package installed.I like to setup into englisch all the way.Via dpkg-reconfigure locales I have installed en_GB.UTF-8 UTF8 language packages and deïnstaled nl_NL.utf8
Generating locales (this might take a while)...
en_GB.UTF-8... done
Generation complete.
But a lot of the commands are still in Dutch like: h2458377:~# uitgelogd.And quite often I got:
-su: warning: setlocale: LC_ALL: cannot change locale (nl_NL.utf8)
How do I get ripped off this error?Just working with/on the command line
Debian Configuration :: Squeeze D-u - Kernel Configuration Skipped
Jul 6, 2010I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
Debian Configuration :: TightVNC Configuration On The Squeeze?
Feb 8, 2011I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
Ubuntu Installation :: Can't Create Japanese Locale: Get A Segmentation Fault On Generating Locale?
Oct 13, 2010Maverick 10.10 is unable to create Japanese locales on my wife's laptop (Acer Aspire 3000). This machine previously had no such problem. The install is a fresh install, since the machine froze during the upgrade (no fault of Ubuntu's). A possible complication is that it froze several times more during the install, and I have gone through many recovery boots and iterations of dpkg configure. All relevant packages are installed, I believe. Everything else works. Through System, Administration, Language Support, I have installed all components of English and Japanese. Currently English is selected. Japanese should appear in the list but does not. Japanese text appears properly, and I can write in Japanese,But all the menus are in English. Fine by me, but my wife will want Japanese when she uses the computer again (not soon).This mostly likely is a glibc/libc6 problem, as far as I can tell. I can't find any other Ubuntu user with this problem recently.And now, some outputs:1. dpkg-reconfigure locales
sudo dpkg-reconfigure locales
Generating locales...
en_AG.UTF-8... done
[code].....
Fedora :: Change ONLY The Locale Numeric Configuration?
Feb 11, 2011I have Fedora 12 on my laptop with locale settings set to spanish-argentina
Code:
locale
LANG=es_AR.UTF-8
[code]....
Ubuntu :: Push Locale Configuration To A Lot Of Clients?
Sep 1, 2011I want to ask a question regarding on the "locale" problem. I've searched a lot on Google, but I think there is no detailed information and logic explained this topic well. Someone may suggest use Preference->Administration->Language Support to add or change whatever language I want. I can't use this way beacuse:
1. I need try to push locale configuration to a lot of linux clients.
2. I want to know the detailed information of how to configure.
I have tried to find the most helpful page on the Internet and read some "man locale":
[Code]...
Debian Configuration :: Dropbox Install For Debian Squeeze From Source Code
Feb 19, 2011how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View RelatedDebian Configuration :: Installed Firestarter Firewall On Debian Squeeze?
Apr 5, 2011I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedDebian Configuration :: Using Tor In Squeeze?
Aug 28, 2011When I activate Tor in Iceweasel, it forbids me access to the internet completely. Even attempting Google results in "Iceweasel is configured to use proxy server that is refusing connection".
I have seen this in Lenny, too - it was caused by activating Tor without having installed privoxy. I installed privoxy and everything was okay. In Squeeze, Tor is using polipo. Polipo is installed and running. I have not played with settings of polipo or Tor, the configuration is the same as it was after installation.
What can be wrong? I am a rather an user than a networking guru. I am connected to internet by means of DHCP, no local lans, no special routings, no additional proxies. I have already tired to reinstall polipo.
Debian Configuration :: ATI Driver For Squeeze
Feb 15, 2010Just installed squeeze on a new laptop(had been runny Lenny on my older one with no issues, but no sound or wireless on the new one).I decided to install the ATI drive for my Radeon Mobility 4500(or some close revision) because the fan is constantly running and based on some other postings, it seems that it could be the graphics card causing it.Downloaded the driver from ATI's site and it seemed to install fine but when starting X.
View 11 Replies View RelatedDebian Configuration :: Downgrade From Sid To Squeeze
Jun 20, 2010When I try to downgrade from sid squeeze I don't get GDM running just a login promt after a reboot.Have also reinstalled nvidia driver but still only login promt.I did aptitude update and aptitude full-upgrade after changing sources.list from sid to squeeze.
View 2 Replies View RelatedDebian Configuration :: NTFS In Squeeze?
Oct 19, 2010Got a problem mounting my Windows partition in Squeeze. It keeps refusing to mount it for me in Dolphin. I am a member of the disk and fuse groups, /dev/fuse is owned by root:fuse, and /sbin/mount.ntfs points to /sbin/mount.ntfs-3g, which in turn points to the ntfs-3g executable. I kind of need this ASAP. I am supposed to be finishing with this machine in 35min, and I am dead in the water without the ability to copy some files from the Squeeze ext4 partition over.
View 14 Replies View RelatedDebian Configuration :: Kernel BUG In Squeeze 2.6.32-5-686 ?
Oct 21, 2010I installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.
The most interesting line from dmesg is:
Here is the full output from dmesg:
I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.
Debian Configuration :: Can't Hibernate On Squeeze
Dec 20, 2010I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :
[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[3506.405310] PM: Device usb1 failed to freeze: error -2
This is the result in pm-suspend.log :
Initial commandline parameters:
[Code]....
Debian Configuration :: Squeeze And Php 5.3.x - Reverting To 5.2.x?
Feb 6, 2011I have upgraded my server to Debian 6.0 Squeeze but it looks like some of my sites are not compatible with PHP 5.3.x so I would like to revert to previous 5.2.6 version.So my question is what to do?a) Remove PHP 5.3.x from system via apt-get and install my old 5.2.6 from old archives at /var/cache/apt/archivesorb) just try to update from archives PHP to 5.2.6?
-rw-r--r--. 1 root root 2413316 May 11 2008 libapache2-mod-php5_5.2.0-8+etch11_i386.deb
-rw-r--r--. 1 root root 2413290 Oct 6 2008 libapache2-
[code]...
Debian Configuration :: No Knetworkmanager In Squeeze?
Feb 6, 2011As a long time user of some other distributions I decided to switch to Debian and installed 6.0 from amd64 kde cd image.Upon logging to KDE I discovered thatant locate knetworkmanager anywhere,it doesnt autostart and I could not find it anywhere else.I am connecting through a wireless network to the Internet so I cant connect through the Ethernet to download it through apt-get for example,if it is not installed by default.lly confused,knetworkmanager is standard tool in KDE but I cant find it in Debian 6.0
View 9 Replies View RelatedDebian :: Trying Out Squeeze / Configuration Could Not Be Loaded
Dec 14, 2010A couple days ago I installed Debian Lenny (netinst) to my friend's laptop, a IBM Thinkpad T23. Got a black screen after gdm loaded and the laptop seemed frozen. Decided to upgrade to squeeze. I edited the apt sources file and changed all the instances of lenny to squeeze, and then upgraded.Had the same display problem, but found a web site that suggested disabling acpi. So I did that, got the sound working, (needed cs46xx firmware), and all seems to be running fine.I get some weird udev messages at boot time, but I have a feeling that's due to how I upgraded. I can't copy and paste since the messages aren't in my system log. If anybody wants more information about it, I can supply it. pgrep shows two instances of udev running so it appears the messages are only warnings.When upgrading to squeeze, I used tds.net debian mirror links. Earlier today I switched to Debian's official US repo URLs and had to upgrade about 250 packages after reloading package data.
Now, when I click on System -> Administration -> Time and Date.After a couple seconds I get a dialog box that says "The configuration data could not be loaded" in bold black letters. Underneath that in smaller letters, "You are not allowed to access the system configuration" I receive that same error when accessing "services" and "users and groups."But I can access the synaptic package manager and update manager from the administration submenu.
Debian Configuration :: Missing CD / DVD Device In Squeeze
Apr 3, 2010I've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.
View 9 Replies View RelatedDebian Configuration :: Does Live-helper Not Like Sid Or Squeeze?
Apr 13, 2010I have been trying to build a Debian-live-version for some time using live-helper. It works fine if I choose lenny as distribution. With sid I always get into trouble.Sometimes live-helper does't find any aufs-modules but it stops looking for them if I keep the options as simple as above.What is the problem of live-helper's to build on sid or squeeze (which I have met similar troubles with)?
View 10 Replies View RelatedDebian Configuration :: Prevent Squeeze From Being Like The Borg?
May 28, 2010Alright, first Squeeze wouldn't create an initial RAM disk even with "--initrd" specified. Now I don't need one and it's creating one for me even though I don't want one! How do I stop this? I'm beginning to feel like I am using Windows in the sense that it's doing things on its own. Don't make me a RAM disk unless I say so!
View 10 Replies View RelatedDebian Configuration :: Accidentally Upgraded Squeeze To Sid?
Jun 16, 2010I just noticed that I had a sid line on my sources.list, at the end of all squeeze lines, and I've been updating more or less regularly. Does the ordering imply some sort of "preference", so that the first lines are preferred over the subsequent ones, or is it all about the latest version?After removing that line, and taking a look at my installed packages with synaptic, all the "latest versions" of the packages seem to be the ones that are already installed, and I click on properties, and there are no older versions available, only "##.##-### (testing)". Emphasis on "testing", rather than "sid" or "unstable". Of course I didn't check all of them, but about a dozen, and none deviated from that pattern. However, I went to double check on the web pages about the packages, and it seems that many of the squeeze's packages are at the same version of sid. I couldn't yet find one that is not.perhaps the sole fact that the sid line was on sources.list is enough to know that something happened -- as I don't recall having ever set up those configuration files about preferred sources/pins or however it's called), and suggestions on how to proceed? My hunch would be to just downgrade things gradually as they eventually fail (as I did with geeqie, which is why I suspect that there is some mess), but leave everything alone. Not try to fix what is not quite broken. And if it fails too often, go full-blown sid.
View 14 Replies View RelatedDebian Configuration :: CUPS Not Working In Squeeze?
Jul 6, 2010I don't print much, but tonight needed to print and found that none of the printers were listed in Okular or Openoffice, then when I tried to open Cups Administration http://localhost:631/ I got the error message Connection to Server Refused
View 4 Replies View RelatedDebian Configuration :: Sloow Nfs After Upgrade To Squeeze?
Aug 22, 20101) old a1300 laptop: P3 800, 256 MiB RAM, HDD, PC-CARD NIC. from lspci: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) with debian (i386), previously lenny, now squeeze. running as server.
[Code]...
Smaller files seem to transfer faster, but I have no idea why. I've checked with ethtool that both NICs are running at 1000Mb/s, and both are connected to the same Gigabit switch. The HDD in the laptop had previously provided (nfs) transfer speeds of 12-13 MiB/s. The options in fstab on the client are what I've changed them to since, while trying to fix the problem. Can't remember exactly what they were, but rsize, wsize and nfsvers are some I put there trying to fix it.
I had considered buying a new, faster HDD for the laptop, but that is certainly out of the question until this is resolved. Edit: Is this the right place to ask about this? I did wonder if the 'General Questions' category was a better fit.
Debian Configuration :: Cannot Change Prompt In Squeeze
Dec 3, 2010I looked into my shell 'profile' on my running lenny and copied the PS1 definition over to my [virtual] new squeeze machine, but astoundingly, the prompt does not change!
The prompt always remains to be like this:${debian_chroot:+($debian_chroot)}u@h:w$
This does definitively not stem from 'profile' and I cannot find, where it is defined and how I can override this. If I do it interactively, in a terminal [terminal running in Gnome], it works like expected. In that script, even if I use 'unset PS1',followed by PS1= ... / export PS1, it does not change,Someone with the knowledge and/or a good idea would be great!
Debian Configuration :: Squeeze - Mobile Broadband?
Jan 25, 20111st post in Debian Forums, just came from Arch...and segmentation fault and wine are the 2 special reasons for my return, it's a great distro but i miss the stable part of the deal.I'm a performance guy and i want to know what you use for mobile broadband connection (USB Pen) with exception of course of network manager, even with 8GB of RAM to deal with i want to keep my Debian Squeeze simple, better said:netcfg / wicd for networkpptp client for vpn........ for mobile broadband
View 4 Replies View RelatedDebian Configuration :: Squeeze Server Not Responding?
Feb 5, 2011I have a Mac G3 and Squeeze 2.6.32-5-686 on an ethernet wired. Works fine with Lenny kde but only in one direction with squeeze kde4. Mac pings squeeze box ok but response is "server may be down or offline". Squeeze connects to Mac normally. Squeeze installed with server option. How do I enable eth0? I need some direction
View 11 Replies View RelatedDebian Configuration :: Moving From Testing To Squeeze?
Feb 9, 2011I have an older system that has been running testing for about 4 years. Originally I was running testing for several packages that were not yet available in stable. However, now that this system has a more crucial role in the network I have considered moving it to stable in hopes that it I can gain some insurance on it's uptime. It is important to note that I have never had a problem with the testing distribution and would be quite content to continue running it; I do want to know my options though.
I have not yet updated the system since the stable release of squeeze, I am considering to change my sources from testing to stable and just let apt take care of the rest. Anyone have any experience with such a thing? After searching Google I have found some solutions to force a downgrade, but that is really not what needs to be done here. I suppose I should have switched my sources to squeeze some time ago and this probably would have worked itself out.
A similar question is what happens a couple of years from now when another release happens. Have you had good luck updating from old stable to stable? I've run testing on several machines now for several years and have went through freezes and dist-upgrades several times with no major problems at all. Will I see the same stability if I move to the stable distribution?
Debian Configuration :: Sarg Package In Squeeze?
Feb 9, 2011I just setup a new squeeze debian 6 server, it will work as proxy server with squid. But I have an issue when i want to install sarg (sarg-report), i cannot find the package thru aptitude/apt-get, however it was present in lenny distribution. Is it a miss in squeeze, is it discontinued or should I add a specific entry in /etc/apt/sources.list? (currently squeeze main, squeeze/updates main)
View 3 Replies View RelatedDebian Configuration :: Squeeze: GPT Support In Grub2?
Feb 14, 2011I have just upgraded from Lenny to Squeeze, and followed the D-I recommendation to upgrade to Grub2. However, the server will no longer boot - giving a 'missing operating system' error, so it's not getting very far in the boot loader process. I have read, in various location that Grub2 supports GPT, but my efforts to fix the situation have met with little success.
I have managed to boot the system using SuperGrub2 (recovery live cd) and can start up successfully from there. However, when I try to fix the grub installation using the Debian wiki recommendation, I'm met with:
<host>:/# grub-install /dev/sda
/usr/sbin/grub-setup: warn: This GPT partition label has no BIOS Boot Partition; embedding won't be possible!.
[code]....
The attached disk is 4.5TB of RAID 5 disk behind an Adaptec 5405 if that's useful.