Debian Configuration :: Prevent Xfce Desktop From Any Changes?
Feb 8, 2011Howto create usb-hdd using live-helper to prevent xfce desktop from any changes? Normal user shouldn't change any icon on the desktop.
View 8 RepliesHowto create usb-hdd using live-helper to prevent xfce desktop from any changes? Normal user shouldn't change any icon on the desktop.
View 8 RepliesAlright, first Squeeze wouldn't create an initial RAM disk even with "--initrd" specified. Now I don't need one and it's creating one for me even though I don't want one! How do I stop this? I'm beginning to feel like I am using Windows in the sense that it's doing things on its own. Don't make me a RAM disk unless I say so!
View 10 Replies View Relatedi would like to prevent all users other than the user "parker" on my system from using the su or sudo commands. I have not attempted to modify the sudoers file so it just contains the standard root ALL = (ALL) ALL.
View 5 Replies View RelatedI have a PC that have a new Ethernet card that is not yet supported by Debian/Lenny.I downloaded the latests driver from the manufacturer and after a make;make install everything works like a charm.My problem is that one day after a probable update, Debian overrided my new driver by an other one causing my Ethernet card to shut down.After an other make install, everything work again like it should..But how do i do to prevent Debian to update my driver ?
View 1 Replies View RelatedWe have the following server at collocation: [URL]
Provider's technicians were working for 3 hrs but finally were unable to set up hardware RAID1 on it.
What could prevent them from doing it? Is it difficult to set up RAID1? It is mentionned as basic function in specifications.
They said debian not booting after raid configured...
I just a newbie.i want to try customize my desktop.i found a website shown linux desktop very greatfull, like this :but i don't know how to start it.any expert guys please let me know the guiding for me to start this.
View 1 Replies View RelatedI'm trying to prevent GDM/Gnome from turning the screen off prior to login. It's current behavior, under 3.14, slowly fades the screen out and then enters DPMS mode after 10 minutes.I have zeroed out the following dconf settings, under both root and user, but the default behavior persists.
org.gnome.desktop.session idle-delay
org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout
org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout
I have a ppp0 entry with post-up options like this
mapping ppp0
map none photon-plus motorola
map timeout: 12
## map init-time: 12 # for slow drivers
[code]...
If I comment those off then no such problem, hence some how ppp0 executed automatically and there is no [auto ppp0] any where. How can I stop this forcefully ?
The default menus in XFCE don't include many things that I want to use from KDE. How can I get those on the XFCE menus? There is a so-called "menu editor" in the settings menu, but it has no documentation
View 5 Replies View RelatedI'm running Debian sid and currently have xfce 4.8.0 installed. I have the thunar-volman package and it is configured to automount everything (cdrom & usb). I have hal, udev, gamin and autofs installed as well.For some reason though, automount just isn't working. It's starting to annoy me.I can mount the devices manually.I looked around already but most posts just advise you to install hal or something.
View 4 Replies View RelatedI am using Jessie with XFCE and I tried to write a service which executes a script to change my wallpaper. When I try to start the service with systemctl start wallpaper.service it fails and I get the outout below from systemctl status wallpaper.service
I don't think it to be a permissions issue, they are -rw- r-- r--
This service is called by a timer that goes off daily. Below is wallpaper.service
I currently have a Samba share on a Debian 7 system. This share was only ever used by Windows systems on the network.
I just finished setting up a Debian 8 system with Xfce, and now I would like to connect to the share. I already installed gvfs-backends and gvfs-bin. When I go to Thunar file manager, and click browse network, I'm presented with a "Windows Network" shortcut. When clicked it says: Failed to open "Windows Network". Failed to retrieve share list from server: No such file or directory.
I've tried editing .xinitrc to contain ck-launch-session and dbus-launch to no avail. Console kit is installed. I'm using Sid without a login manager, and xfce's suspend and hibernate work fine on my Wheezy computer. Xfce4-session and consolekit are installed. Is this a problem with permissions?
View 3 Replies View RelatedThe laptop runs Debian Squeeze XFCE installed from the Live iso (uname -a gives 2.6.32-5-686 as the kernel) and has Wicd 1.7.0 for network management and uses the ipw2100 wifi firmware/drivers. It connects fine using WEP encryption at home and to unencrypted connections found in a couple of public areas. I have had one problem with a WEP encrypted connection in a cafe (got through encryption, but could not get an IP address. There are workarounds which I will try next time I have coffee there When changing my router to use WPA2, I get 'bad password' errors. There is quite a literature on 'bad password errors' and Wicd and kernel 2.6.32, however a lot of the pages are contradictory. The Wicd log showed this...
2011/06/07 17:25:59 :: WPA_CLI RESULT IS ASSOCIATING
2011/06/07 17:26:00 :: wpa_supplicant authentication may have failed.
2011/06/07 17:26:00 :: connect result is Failed
[code]...
I'm fine using WEP at home, but I need to connect out and about as well and meet WPA2 connections in some locations
Trying to create an icedove desktop shortcut and cannot.
View 1 Replies View Relatedi am trying to install xen on Debian with xfce desktop environment. The instruction for xen at the following link
[URL]
says it is required to do the following:
- The Linux hotplug system (e.g., /sbin/hotplug and related scripts. I have downloaded the package "hotplug-2004_03_29.tar" and uzipped the package. I have the following files/packages:
testusr@debian:~/Downloads/hotplug-2004_03_29$ ls
ChangeLog etc hotplug.spec mkinstalldirs sbin
debian hotplug.8 Makefile README
-------------------------------------
[Code]....
I've squeeze with xfce desktop installed. Howto Display IP address after startup automatically on the xfce desktop?
View 5 Replies View RelatedSince update-manager was removed from Debian Jessie, I am looking for something similar or a way to install update-manager for 8.2. I would like a GUI.
I have tried gnome-packagekit, but some of the commands don't appear to work or it seems incomplete and I don't know of a way to test to make sure that it is working.
Other sites recommended to use smartpm. However, I cannot seem to find the plugin xfce4-smartpm-plugin in [Xfce Goodies] that would work as a notifier.
Unattended-upgrades does not meet my specifications, because to my knowledge there is no GUI configuration for this.
Though Debian Jessie is a great distro, I am finding it difficult to recommend to some newer users because it does lack a GUI updater/notifier at this time.
I upgraded my main PC's Xfce 4.6 to Xfce 4.8 this morning.Now, every time I start Thunar for the first time after a new boot, it takes about 30 seconds to appear, and then about 10 seconds later, a second instance of it appears.After that, Thunar appears instantly every time I start it during that same session. But if I shut-down or restart my PC, Thunar again takes about 30 seconds to start up, and a second instance of it appears about 10 seconds later.
Google searches seem to indicate that people running other distros are also experiencing this problem. On advice in a different forum, I deleted the ~/.config/Thunar folder and restarted my PC, but that didn't help -- it created a new Thunar folder, but the long delay and the double-Thunars are still there every time I run Thunar for the first time in a session.
I am trying to make it in preseed-installation,but a problem have occured.I used
debian-7.6.0-amd64-xfce-CD-1.iso
,and my preseed.cfg is as follows.
Code: Select alld-i debian-installer/language string en
d-i debian-installer/country string JP
d-i debian-installer/locale string en_US.UTF-8
d-i localechooser/supported-locales en_US.UTF-8
d-i console-setup/ask_detect boolean false
d-i console-setup/layoutcode string us
d-i console-setup/charmap select UTF-8
[code]...
Booting debian with xfce desktop (8.2, amd64) using a live cd of iso hybrid. While a wired network can be easily connected using network manager, it fails to recognize the mobile broadband (I am using a USB dongle). The network manager gui disappears after I select `Mobile Broadband'. Moreover, Code: Select allnmcli -p con does not recognize the gsm connection, but Code: Select allnmcli dev status returns that a USB gsm connection is present at ttyUSB3.
View 4 Replies View RelatedMy Googling about this said to make sure xfdesktop was running. I have.Changes made to the panel, to startup and session persist.But number of workplaces, wallpaper, font, theme and so on revert to what they were before. These settings are from when I used Xfce before in Ubuntu 8.04. (My /home dir is on its own partition and I like to keep all my config files for apps I have used and might want to again.)I suspect I might need to delete a config file but I'd rather not undo all of the other settings that do work. Which? Or is it something else?
View 6 Replies View RelatedI have a issue with my host file
127.0.0.1 debianserver
ping debianserver
ping: unknown host debianserver
# hostname
debianserver
[Code]....
I running xfce4.8 and when I start my session I get a warning: xfce wiil not run properly add Debianser to the host...
I have been an Ubuntu user for the past two years and have recently made the switch to Debian, so while not new to GNU/Linux or Debian-like distributions I am still learning on many fronts. Installing squeeze directly caused issues with my Wi-Fi for some reason, so I installed lenny and performed aptitude safe-upgrade (full-upgrade kept breaking the system), and took care of stray packages manually to get a working squeeze system. My desktop environment of choice is Xfce, using XDM.
Ever since the upgrade, both the login prompt and the actual desktop have had a black background with no icons or right-click menu. I am guessing that the issue is a daemon that should be running but isn't, although I have no idea where to begin troubleshooting the issue, which is why I came here. I've uploaded at of my desktop here Right-clicking in the black space doesn't do anything, and changing my wallpaper settings is ineffective.It's not a huge problem for me, as everything else in the system appears to work, but I would like to figure out what the problem is, fix it, and maybe learn something about Debian in the process.
I have just tried XFCE4. Everything is cool except that when i select, let's say, 5 files on Desktop i can't move them simultaneously. I can move just one file. Is this normal behavior of XFCE?
View 1 Replies View RelatedI've Live Lenny with xfce desktop.Howto create application launcher and change icon on xfce desktop?
View 3 Replies View RelatedHowto build live usb-hdd with 2 different keyboard layouts for xfce desktop?
View 2 Replies View Relatedis it possible to leave just xfce as the only desktop and delete gnome or would that disrupt things since gnome is the default? if so, what would be the command to delete gnome and leave a true xfce as the only desktop?
View 6 Replies View RelatedI have a machine running XFCE in a "kiosk" environment. The machine normally runs without a keyboard or mouse, and I remote control it via VNC and SSH.
When the machine starts up, the mouse cursor sits in the center of the screen. I don't want to plug in a mouse or use VNC to move the mouse to the bottom-right corner so that it is not visible, so is there a way to hide the mouse cursor or tell it to move to the lower right when X starts? It would be even cooler if the mouse could be disabled or hidden when no mouse is connected, but re-enabled when someone plugs in a mouse, but that's probably asking too much.
As a normal user I have activated the functions of the Quit applet, i.e. Logout, Shutdown and Restart are active buttons. I am able to restart or shutdown, no problems. But when I use the Logout button I don't get logged out, just returned to the login shell & I am still logged in as my user. I don't have a display manager installed and I do NOT want to use a display manager such as XDM or GDM. How do I get the Logout button to actually logout the user? It appears I am only getting logged out of the x-session, but I want complete logout.
View 6 Replies View Related