Debian Configuration :: Ignoring Bad Line 1 'powernow-k8'

Jun 12, 2010

I have defoptions=quiet in my menu.list file and it keeps printing

ignoring bad line 1 'powernow-k8' across the screen during boot. The thing is that I have removed that line from /etc/modprobe.d/options, so why do I keep getting the warning?

View 5 Replies


ADVERTISEMENT

Debian Configuration :: 2.6.32-5 686-bigmem Powernow-k8 No Such Device

Mar 16, 2011

I newly installed Debian 6.0 I choose for the 2.6.32-5 686-bigmem kernel because I have 6Gb of RAM Now I want to use Cool n Quiet When I try to do modprobe powernow-k8 I get a 'no such device' message I have an Athlon64 X2 6000+ cpu. Am I using the correct kernel for this?

View 1 Replies View Related

Debian Configuration :: Exim Ignoring External Connections?

May 25, 2011

I have exim setup on squeeze to run as an "internet site". Outgoing mail works fine but it seems to just ignore incoming smtp requests on port 25. I can see the incoming connection via tcpdump but exim doesn't seem to talk. If I connect via telnet it rather quickly says connection refused. Is there something additional I need in the Exim conf?

View 1 Replies View Related

Debian Configuration :: Booting Into A Command Line With No X

Jun 7, 2011

I wanted to be able to have a boot option to just use a command line with no X running at all. What I did was remove the gdm3 link in rc5.d . Then in /boot/grub/grug.cfg I made a new menuentry that is exactly the same as the default but I changed this line:

linux /boot/vmlinuz-2.6.32-5-686 root=UUID=3e926e70-cb92-4847-997c-37aabda532ff ro quiet to this line: linux /boot/vmlinuz-2.6.32-5-686 root=UUID=3e926e70-cb92-4847-997c-37aabda532ff ro 5

This worked. It gave me a command line interface with no X running.

My question is is this the recommended way in Debian? If not what is?

I have been using Linux for a very long time but I used mostly Slackware. I tried Redhat for awhile but really hated bluecruve, shows how long I have been using Linux. I have played with other distros but I always went back to Slack. But I really dislike KDE4 so Slack is no longer an option. KDE4 reminds me of a 12 year old girl that got a big box of makeup and had to use every bit of it. I now am using Debian on my laptop. And as aside I gave my 16 year old daughter a laptop for her birthday. She used the included version of windows 7 for awhile but then asked me what would be a good Linux distro for her. I showed her distrowatch and told her to look at the top distros. She then asked me to help her put on Debian. She loves it. She is a very good musician and song righter, She actually gets paid for doing that at 16, and really likes the programs in Linux to work with sound files. She also does MIDI stuff with our Yamaha Clavinova.

Now we are trying to do things the Debian way and it is a little different then other distros. So did I do the command line thing they way it's recommended in Debian. I have looked on line but all I could find was working in a shell and that is not what I was looking for.

View 2 Replies View Related

Slackware :: Nfs "ignoring Line Due To No Section"?

Apr 3, 2011

I see this message in Current every time I mount some remote nfs v3 shares, whether manually or from fstab.All I find on the web are multiple copies of a post when the patch was submitted containing that message.I don't know C++ and don't know what the message means.I don't see the message when booting 13.1 and connecting to the same remote nfs v3 shares.Adding /etc/nfsmounts.conf and "nfsvers=3" in the mount parameters does not eliminate the message.The message seems harmless. The shares get connected. Still, who likes superfluous messages during booting?

View 2 Replies View Related

Debian Configuration :: Command Line Based Ppp Dialer?

Mar 13, 2010

I use Huawei EC1260 modem for mobile broadband connection. What are the command line shell based ppp dialing applications available apart from wvdial? insight how to use pppd/chat directly.Actually wvdial is working on debian very well with this modem. But I need to use it on an arm le based system, where wvdial does not work properly because of setcontext(), getcontext() dependency on arm platforms.

View 2 Replies View Related

Debian Configuration :: Jessie Upgrade Ssh Command Line Reboot

Nov 13, 2015

I've upgraded a server on our LAN from fully functioning Wheezy to Jessie. All seems fine except remote administering using Putty from my windows workstation when issuing reboot from command line, it goes down and reboots but stops at login prompt asking for username and password and does not come back on the LAN network. This server does not normally have a monitor or keyboard so my ability to remote admin this server in effect is disabled.

If I log on, it will come back on the LAN network. I've checked the logs but can't see any errors. Is it in the configuration of Jessie somewhere or perhaps a Grub issue. I have 5 other production Wheezy servers that I intend to update to Jessie once I understand how to deal with this problem.

View 4 Replies View Related

Debian Configuration :: Can't Send Email From Command Line Using Mail

Mar 17, 2010

I'm running a desktop-less version of Debian via Sun VirtualBox. The reason I'm doing this is because I don't have enough graphics or RAM power to have a desktop environment running on top of my current desktop; also, I want to learn Linux through the command prompt. I'm running the AMD64 version of Debian; I'm not sure if that's relevant.

My main goal is to be able to email useful files from the virtual Debian to my main computer, so that I can save them for later if I ever decide to do a "real" installation of Debian on this computer. I realize now that there's probably some "easy" way to do this by reading the virtual machine's hard drive, but at this point, my curiosity wants to see this issue resolved. I started off wanting to find a command-line program to send my email with, and one was built-in. The syntax ~$ sudo mail -s "Subject" email@yahoo.com "This is a test email."

C^D
Cc:C^D ~$

is what I found. I tried it, and (unsurprisingly), it failed. I then learned that the mail command calls exim4, or something along those lines, so I needed to configure exim4. Soon thereafter, I learned that Yahoo's SMTP wasn't public, but Google's was. So, I found this web page which described how to configure exim4 to allow for email to be sent to a Gmail account. I made one, and followed the page word-for-word.

I sudo-mailled a test email to my Gmail account, and nothing happened. I waited a bit longer, and still, nothing happened. Finally, I started looking around, and found out about the exim4 logs in /var/log/exim4. In my mainlog, I think that it's telling me that Google denied my connection: <date><time><random numbers and letters> == **********.gmail.com R=send_via_gmail t=gmail_smtp defer (111): Connection refused

So, now, I'm just stuck. I don't know what I did wrong, I checked my exim4.conf.template twice for spelling errors, but I don't think I made any. At this point, I can only hope that someone else has had a similar problem, or knows what I'm doing wrong (or haven't done yet).

View 14 Replies View Related

Debian Configuration :: Check Battery Levels Command Line?

Feb 12, 2011

since I am on a Dell inspiron 1545 laptop, being able to display my battery charge is critical. After some extensive googling, I found I need a command 'acpi', which does not exist on my computer. I cannot seem to find it in the packages database; the closest thing being 'acpi-support' apt-get install also can't find it.

I tried cat /proc/acpi/battery/BAT0/state, but that only shows me if the battery is discharging or charging and doesn't give me an actual percentage.

View 1 Replies View Related

Debian Configuration :: Dhclient.eth0.leases Line Semicolon Expected?

Dec 24, 2010

Any hints why I'm getting the following message: dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1 dhclient: Copyright 2004-2010 Internet Systems Consortium. dhclient: All rights reserved.

[Code]...

View 9 Replies View Related

Debian Multimedia :: Continue Apt-get Install Ignoring Errors

Nov 28, 2015

I am trying to instsal Gnome. While installing, 'gnome-getting-started-docs' fails. This is not a critical package, and I would like to see gnome installation / setup continue.

Is it possible with some command line options? I've tried 'apt-get -f install' 'apt-get -m install gnome' and various combinations thereof.

(Error I see is 'dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt).

View 4 Replies View Related

Ubuntu :: Overclocking Not Possible With Powernow-k8?

Jul 16, 2010

Im trying to overclock my system and I cannot find a conclusive answer to this issue.It appears that I need to compile a custom kernel, is there a way around this?So where do I go from here without compiling a custom kernel and removing powernow-k8 from it?Is there a workaround to this? There is no setting in my bios either. ECS NFROCE3-A system board.

View 3 Replies View Related

Fedora X86/64bit :: Powernow-k8 And Incorrect Pstate 0 Frequency

May 1, 2011

If I boot my system with default BIOS settings (no overclocking), the CPU runs at 3.3GHz and powernow-k8 enables a maximum speed of 3.3GHz, as can be seen from the following:

[Code]....

Clearly, for some reason, powernow-k8 is mis-calculating the pstate 0 or maximum speed and this is reflected in the files within /sys/devices/system/cpu/cpu?/cpufreq/ I have tried to update /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq, however despite the file being writeable by root, the change is not maintained. Other than setting the CPU policy to "Performance" rather than "On Demand", is there any way I can force the correct pstate 0 (maximum) CPU speed?

View 2 Replies View Related

OpenSUSE Hardware :: Powernow-k8 With 11.2-64 - Cannot Lower The Speed Of The CPU-cores

Nov 19, 2009

I am testing version 11.2 (Released version) and have this problem (part of dmesg):

[Code]...

So Opensuse cannot lower the speed of the CPU-cores. I tried updating the BIOS without luck. powernow-K8 under Opensuse version 11.1 (dual-boot) works perfect.

View 5 Replies View Related

Ubuntu :: Lucid - CPU Scaling Not Working Anymore (Powernow-K8)

May 9, 2010

In Lucid I cannot get CPU scaling to work anymore, in previous Ubuntu releases this was not a problem with the same hardware (AMD Phenom 9500 Quad). I used to load module 'powernow-k8' and 'powernowd' to make it work, but it seems 'powernow-k8' is not available in Lucid. Anyone who has cpu scaling working in Lucid?

View 9 Replies View Related

CentOS 5 Hardware :: AMD Opteron Powernow-k8 Wrongs Always Appearing In Console?

Feb 12, 2009

I found two questionss when I installing CentOS 5.2 X86_64 and it made me puzzled。Wrongs are follows:1.Jan 9 20:55:36 Linux kernel: powernow-k8: vid trans failed, vid 0x8, curr 0xaJan 9 20:55:36 Linux kernel: powernow-k8: transition frequency failedThis wrong information always appearing in console, have tried BIOS default setup.2.Jan 15 21:31:14 Linux kernel: Buffer I/O error on device sdb2, logical block 2498412546This wrong information always appearing in starting time, altogether 8 times My system:AMD Opteron 270 x2 (2000Mhz,Socket 940,Dual-core)TYAN S2882-D (AMD 8131+8111 Chipset)Qimonda ECC Reg DDR400 2G x2CentOS 5.2 X86-64

View 5 Replies View Related

Debian Configuration :: ProFTPd Configuration - Use To Host MySQL Databases And A Few Websites

Nov 18, 2010

I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".

It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.

View 6 Replies View Related

Debian Configuration :: Multipath Configuration On 5.0 64 Bit - Doesn't Create The Relative Devices

Jul 20, 2011

i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard

Here is the multipath.conf

[Code]....

So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun

View 1 Replies View Related

Debian Configuration :: Reboot Both The Server And The Client Machines Every Time Change The SAMBA Configuration?

Apr 5, 2010

I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.

My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.

View 1 Replies View Related

Debian Configuration :: Fstab Configuration - Failed To Open /proc/filesystems: No Such File Or Directory

Aug 23, 2011

I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory

[Code]..

View 14 Replies View Related

Debian Configuration :: Fstab Configuration And Timeout - Automatically Continues Booting Even If The Hard Drives Are Not Attached?

Aug 3, 2011

I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)

View 5 Replies View Related

Debian Configuration :: Boot Via PXE, "no Default Or Ui Configuration Directive?

Mar 19, 2011

A week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!

I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)

[Code]...

View 1 Replies View Related

Debian Configuration :: No Longer Allowed To Access The System Configuration

Jul 31, 2011

I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.

View 14 Replies View Related

Fedora :: Ushare Configuration - Last Line Stop Process In The Terminal Via Ctrl+C

May 30, 2009

I just installed ushare on Fedora 10 (yum install ushare is all it took to do), and followed the guidance then to configure sharing for an Xbox 360, [URL] the code below. Notice the last line...due to stopping process in the terminal via Ctrl+C. It appears to me, based on this ending UPNP sharing, that the first line will need to be run each time want to turn on sharing, right? I thought this would simply configure ushare sharing one time, and possibly intiate some sort of file sharing service on each boot, but this appears not to be the case. If I am right, does anyone know how I can develop a script to run at boot to allow ushare to open sharing and keep it open?

[Code]....

View 3 Replies View Related

Debian Configuration :: Coding The Apache2 Charset Configuration?

Mar 5, 2010

I use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.

View 1 Replies View Related

Debian Configuration :: Exim4 Configuration For Local Addresses

Jun 17, 2010

I am working on a Debian 2.6.26-19 Distribution with exim4 as MTA. After a system restart a problem occurred with delivering emails to local addresses. These local addresses use a 1and1 mailserver for email. The MX records for the local domain are set correctly but exim does not use a DNS lookup for these addresses because it identifies them as local addresses. I figured this out by executing the exim4 -d -bt command. The dns lookup part of the result looks like this (I replaced the actual address with placeholders):

[Code]....

The eventual result of the exim4 -d -bt command is: [user]@[domain.ext] is undeliverable: Unrouteable address How can I make sure, that exim4 makes a DNS lookup for the local addresses instead of skipping it? I know that I have to edit a exim4 configuration file, but I could not figure out which and how.

View 1 Replies View Related

Debian Configuration :: Squeeze D-u - Kernel Configuration Skipped

Jul 6, 2010

I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.

I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.

I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.

So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.

However, just in case someone else runs into this:

1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.

2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)

View 14 Replies View Related

Debian Configuration :: Get The Windows One Working Again - Grub Configuration

Oct 3, 2010

I was trying to get the Windows one working again. Here's what fdisk -l reads:

[Code]...

I'll change these or do some grub configurations, if anyone knows what ones can work.

View 1 Replies View Related

Debian Configuration :: Saving Configuration And Packagelist For Reuse?

Nov 14, 2010

I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?

View 4 Replies View Related

Debian Configuration :: Kannel Configuration For Huwei GSM Modem

Jan 24, 2011

To configure SMS gateway using Kannel configuration for Huwei GSM Modem

dmesg gives attached modem in my system:

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved