I am running a server that has Etch on it. I have only recently been given this responsibility as I am the "IT-guy". I am running postifx, squid, shorewall, courier, samba and other things. The network has about 75 users with emails and data. I do not want to do anything that would risk their data and emails getting lost.
Is it still recommended that I upgrade to Lenny and then Squeeze?
1) old a1300 laptop: P3 800, 256 MiB RAM, HDD, PC-CARD NIC. from lspci: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) with debian (i386), previously lenny, now squeeze. running as server.
[Code]...
Smaller files seem to transfer faster, but I have no idea why. I've checked with ethtool that both NICs are running at 1000Mb/s, and both are connected to the same Gigabit switch. The HDD in the laptop had previously provided (nfs) transfer speeds of 12-13 MiB/s. The options in fstab on the client are what I've changed them to since, while trying to fix the problem. Can't remember exactly what they were, but rsize, wsize and nfsvers are some I put there trying to fix it.
I had considered buying a new, faster HDD for the laptop, but that is certainly out of the question until this is resolved. Edit: Is this the right place to ask about this? I did wonder if the 'General Questions' category was a better fit.
My version of Squeeze was about half a year old when I updated/upgraded it just now. As part of the (longish) process I was advised to run apt-get autoremove, which removed what looked like a stunning amount of material. As another part I noticed a huge number of error messages about nonexistent locale files (I think) whizzing by.
Well, the result has various cosmetic changes and no doubt fewer bugs, but it doesn't have WLAN. I used to see an icon at the top right like two tadpoles chasing each other, turning into a set of green (if I was lucky) or grey (if not) bars. No longer. No tadpoles, no bars, no error message, nothing.
This very recent thread ("Just isntall debian 6.0, wired networking ok but no wireless") looks helpful. However, I don't know what WLAN hardware I've got or how to get a text dump of this kind of thing. 4D696B65 kindly points the person who asked to wiki.debian.org/ipw2200. I don't know whether I have any of these "Intel PRO/Wireless 2100, 2200 and 2915 devices" but I'm encouraged to read there that [the file] is now also available in the nonfree-firmware tarball which we build regularly on cdimage.debian.org. Supply this blob on a CD/floppy/USB drive etc. and d-i will do the right thing. I don't know what either "blob" or "d-i" means, but I was rather hoping that some software or other would look at the hardware, look at the available firmware, and install accordingly (as happened months ago). So got the (small) file; I opened it up; I copied the contents to a CD (even though it's not an ISO). But apt-cdrom add is not interested.
I just upgraded from Lenny to Squeeze and now when I enter startx I get a solid black screen and the computer does not respond to any keyboard input. Ctrl-Alt-Backspace, Ctrl-Alt-Delete, Esc, Alt-F2, Alt-F4, etc. all do nothing. No beeps or anything. I have an NVidia graphics card and have been using the proprietary NVidia drivers. I originally thought the problem might be related to this driver but I tried both the nv and vesa drivers and got the same results.
Attached is my Xorg.log.0 file. It just ends after the GLX extension initialization.I am able to use ssh to login after running startx. Running "ps aux" from the remote machine I did not see a process for X. I copied the output below the Xorg.log.0 file.
I upgraded from lenny to squeeze on a notebook and I can no longer connect to the wireless network. The computer is an LG notebook and the network card is ralink rt2860. I am using Gnome and NetworkManager. The wireless key is WEP hex. It was working fine with lenny till before the upgrade. After the upgrade, the network card stopped working. So, I checked
$ lspci|grep Network
08:00.0 Network controller: RaLink RT2860
Then I reinstalled the driver with apt-get install firmware-ralink wireless-tools Then the network manager tray started working again and saw the network, but cannot connect. It was trying to connect but timed out and kept asking for the password. It is the correct password. I tried deleting the old connection and recreated a new one in the nm. But still does not work.
[Code]...
I try to upgrade Etch to Lenny and get the following problem:
Code:
# apt-get update
# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree... Done
[code]....
I've a very old server with Debian Etch, and now I need to upgrade to Squeeze. I think it's correct to upgrade first to Lenny, so I followed this link:
[URL]
[code]....
Score is -2280
Accept this solution? [Y/n/q/?]
Why is my Xen server (An up-to-date Lenny box) making Xen DomUs as Etch boxes? I run a command such as:
[Code]...
This is 100% replicable. I certainly never asked it to create an Etch VM! I cannot find anything in the docs to change this. And for the record, I did let it finish creating it, and it most definitely made an Etch box.
I'm going on to install my old application running on specific old configuration (debian 4 etch) into my virtual machine...
This time, i'm hurting a new problem while installing postgresql in the release 8.2 (not 8.3, nor 8.4, neither 9.x cause my application will run only on 8.2).
Logging in root, i enter this (like in 2008) :
But today (year 2011 with old etch), when i enter this i got the error message than it cant find this paquets ! off course i did my apt update before.
So, what can i do ? i really need to install the exactly 8.2 release (even 8.2.21 will be good)
I'm trying to upgrade a Debian Etch box to Lenny. I've opened /etc/apt/sources.list, did a global replace etch->lenny. Then I did "apt-get update" as root. After some activity, I got the following message:
W; GPG error: http://security.debian.org lenny/updates Release: the following signatures couldn't be verified because the public key is not available: NO_PUBKEY xxx And then another error of the same nature for the different, FTP site. Then it said I might to run apt-get update to correct that.
<Big Red Flashing Sign that reads, "NEWBIE with two Linux books and very little brain"> I just installed Sarge from a CD onto an old PC and ended up with Debian Linux 3.1, Kernel 2.4.
PC Specs:
Spacewalker Mainboard (AK31V3.1) SocketA AMD Athlon/Duron Processor based DDR Main Board
2x 256MG DDR DIM Q
350w power supply
NVIDIA GeForce AGP8X 6200 Graphics Card 256 MB RAM
Award Modular Bios v6.00PG 12/05/2003
LG Monitor
USB Mouse, Standard keyboard
I did not configure any servers or do any package selections but did manage to get the internet connection working (actually Debian managed that all by itself). I'd like to "upgrade" to Lenny.
Do I need to upgrade to Etch first or can I go straight to Lenny? At what point do I "upgrade" the kernel (before upgrading to Etch/Lenny? After?)
I'm trying to upgrade an etch system to lenny, I've updated my sources list to lenny and ran apt-get update. When I try apt-get install apt
apt-get install apt I get the following:
Reading package lists. Done Building dependency tree. Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation:
The following packages have unmet dependencies. apt: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch10+b1 is to be installed Depends: libstdc++6 (>= 4.2.1) but it is not going to be installed E: Broken packages
if I try apt-get install apt libc6, it wants to upgrade a whole heap of packages - will this be a safe thing to do ?
I've been upgrading a bunch of our servers from sarge to etch and then to lenny, on two of these servers, cron has broken, cronjobs will not run. On another two (that have no significant differences from the others) cron is unaffected I created a simple job to run while I was testing
*/1 * * * * root /usr/local/mailtest-1 in the script is echo test mail from busted server | mail -s "test mail from your busted server" [URL]. and that runs fine if I run it manually, I've added it into /etc/crontab and crontab -e but haven't got a single mail from it. The cron service is running
I tried apt-get remove --purge and then a re-install but it doesn't seem to have worked. All the logs have stopped rotating as well so I'm starting to think that maybe it's not a fault with cron but with some other service that it depends on. However, I've not been able to figure out what that might be.
I have just upgraded my Debian 4.0 box to Debian 5.0. The upgrade is ok and the version of debian is 5.0.6.
Webmin, despite all my efforts, is still displaying 4.0 and when I force it to 5.0 manually, it states: "Warning - Your system is actually running Debian Linux version 4.0."
On my debian web server I curently have ImageMagick 6.3.7 08/07/09 Q16 since this is an old version of imagemagick i wanted to upgrade my system that still runs etch, and afterwards upgrade imagemagick. I can not see what version the current lenny imagemagick package has, but I assume it is newer then 6.3.7, no?
When i ugraded I found out that my apt-sources used stable rather than etch. So I already had a mix of lenny and etch I suppose. I then had > cat /etc/debian_version 4.0 Before I upgraded I changed my apt sources from stable to etch, updated the package-tools and did a dist-upgrade (for details, I followed these instructions). After restarting I have still 4.0 as debian version. Also uname -r is 2.6.17. How can I do a correct update?.
Also my services were not started (ftp,ssh, apache2), so I asked my hoster to start the ssh service. This morning everything was up again, but it seems like nobody there have had a look at this. How do I absolutely ensure that my ssh service is start at boot. It is a remote webserver, so I need at least this service to be running.
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View RelatedI installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedWhen I activate Tor in Iceweasel, it forbids me access to the internet completely. Even attempting Google results in "Iceweasel is configured to use proxy server that is refusing connection".
I have seen this in Lenny, too - it was caused by activating Tor without having installed privoxy. I installed privoxy and everything was okay. In Squeeze, Tor is using polipo. Polipo is installed and running. I have not played with settings of polipo or Tor, the configuration is the same as it was after installation.
What can be wrong? I am a rather an user than a networking guru. I am connected to internet by means of DHCP, no local lans, no special routings, no additional proxies. I have already tired to reinstall polipo.
Just installed squeeze on a new laptop(had been runny Lenny on my older one with no issues, but no sound or wireless on the new one).I decided to install the ATI drive for my Radeon Mobility 4500(or some close revision) because the fan is constantly running and based on some other postings, it seems that it could be the graphics card causing it.Downloaded the driver from ATI's site and it seemed to install fine but when starting X.
View 11 Replies View RelatedWhen I try to downgrade from sid squeeze I don't get GDM running just a login promt after a reboot.Have also reinstalled nvidia driver but still only login promt.I did aptitude update and aptitude full-upgrade after changing sources.list from sid to squeeze.
View 2 Replies View RelatedGot a problem mounting my Windows partition in Squeeze. It keeps refusing to mount it for me in Dolphin. I am a member of the disk and fuse groups, /dev/fuse is owned by root:fuse, and /sbin/mount.ntfs points to /sbin/mount.ntfs-3g, which in turn points to the ntfs-3g executable. I kind of need this ASAP. I am supposed to be finishing with this machine in 35min, and I am dead in the water without the ability to copy some files from the Squeeze ext4 partition over.
View 14 Replies View RelatedI installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.
The most interesting line from dmesg is:
Here is the full output from dmesg:
I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.
I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :
[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[3506.405310] PM: Device usb1 failed to freeze: error -2
This is the result in pm-suspend.log :
Initial commandline parameters:
[Code]....
I have upgraded my server to Debian 6.0 Squeeze but it looks like some of my sites are not compatible with PHP 5.3.x so I would like to revert to previous 5.2.6 version.So my question is what to do?a) Remove PHP 5.3.x from system via apt-get and install my old 5.2.6 from old archives at /var/cache/apt/archivesorb) just try to update from archives PHP to 5.2.6?
-rw-r--r--. 1 root root 2413316 May 11 2008 libapache2-mod-php5_5.2.0-8+etch11_i386.deb
-rw-r--r--. 1 root root 2413290 Oct 6 2008 libapache2-
[code]...
As a long time user of some other distributions I decided to switch to Debian and installed 6.0 from amd64 kde cd image.Upon logging to KDE I discovered thatant locate knetworkmanager anywhere,it doesnt autostart and I could not find it anywhere else.I am connecting through a wireless network to the Internet so I cant connect through the Ethernet to download it through apt-get for example,if it is not installed by default.lly confused,knetworkmanager is standard tool in KDE but I cant find it in Debian 6.0
View 9 Replies View RelatedA couple days ago I installed Debian Lenny (netinst) to my friend's laptop, a IBM Thinkpad T23. Got a black screen after gdm loaded and the laptop seemed frozen. Decided to upgrade to squeeze. I edited the apt sources file and changed all the instances of lenny to squeeze, and then upgraded.Had the same display problem, but found a web site that suggested disabling acpi. So I did that, got the sound working, (needed cs46xx firmware), and all seems to be running fine.I get some weird udev messages at boot time, but I have a feeling that's due to how I upgraded. I can't copy and paste since the messages aren't in my system log. If anybody wants more information about it, I can supply it. pgrep shows two instances of udev running so it appears the messages are only warnings.When upgrading to squeeze, I used tds.net debian mirror links. Earlier today I switched to Debian's official US repo URLs and had to upgrade about 250 packages after reloading package data.
Now, when I click on System -> Administration -> Time and Date.After a couple seconds I get a dialog box that says "The configuration data could not be loaded" in bold black letters. Underneath that in smaller letters, "You are not allowed to access the system configuration" I receive that same error when accessing "services" and "users and groups."But I can access the synaptic package manager and update manager from the administration submenu.
I've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?
View 12 Replies View RelatedI've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.
View 9 Replies View Related