Debian Configuration :: Apt Not Finding Source?
Feb 21, 2010
I just finished installing Debian 2.1 on a very old laptop for some light word processing and web browsing, and am trying to get apt working so I can use it and dselect to install packages. Whenever I run apt-get update as a first step, I get stuck at 0% with an eventual timeout (this also happens when running the update step of dselect).
I know that my network card (a Farallon EtherWave) is working because I can ping my local gateway and remote sites. In my sources.list, I have this line for the Debian archive for this release: deb [url]contrib main non-free
Can anyone think of why I can ping the archive successfully, but apt will not read it? Do I need to change some network configuration, or my source line?
View 4 Replies
ADVERTISEMENT
Feb 19, 2011
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies
View Related
Dec 11, 2010
I wonder do we need firewall for home pcs at all?I mean, fine, for servers and stuff, but I have my own laptop station. People have different position on this issue.
View 14 Replies
View Related
Mar 15, 2011
I am using NetworkManager Applet in Gnome to connect to the internet with a 3G modem. After last update few days back it changed the way it was recognizing the modem. I used to click on the NetworkManager Applet icon on the notification area and choose my configured mobile connection from the list. Because, as I said, I am using mobile broadband connection and I have to check via SMS my usage in order not to overcome the GB I am supposed to use (to avoid overpriced charge). In order to use Wammu to send/receive SMS I have to close the internet connection by right clicking on the NetworkManager Applet and uncheck "Enable Mobile Broadband" otherwise Wammu can't use the usb dongle because it's locked by the internet connection. Up to this point all is working exactly the same. Except when I uncheck the "Enable Mobile Broadband" the NetworkManager Applet disappears and I can only get it back with a reboot. Also I tried clicking on the applet and choosing "Disconnect" from the menu. The applet stays there but there are no more options for mobile connection. Only wired connections and VPN (whatever that is). In this case if I disconnect and reconnect the usb dongle it recognise it again. So my question is: Is there a way to make NetworkManager Applet to always stay aware of the usb modem without disconnecting or rebooting? Or at least is there a command that can search for new usb hardware without the described procedure?
View 6 Replies
View Related
Jul 9, 2011
I have a fresh install of Debian Squeeze AMD64 which I'm trying to install KVM on. I have no idea what I'm doing so I figured someone on these forums might be able to explain it. I have already verified VT support and enabled it in the bios. I have googled and read about KVM installation but everything I can find is either confusing or doesn't work. Also I am trying to install it from source because I want to experiment with modifying it later.
View 10 Replies
View Related
Aug 28, 2015
On a fresh installed Debian8.1 whit Mate Desktop. I start Synaptic. Lets show the Source, all empty. I can't install or remove anything. Whats happens?
View 6 Replies
View Related
Feb 21, 2010
Is it possible to put the ISO images for Debian on your system and point the APT config at them with some sort of driver to read them like disks? That would sure save a lot of disk swapping.
View 2 Replies
View Related
Apr 30, 2010
I am using Lenny kernel version 2.6.26-2-686.I am trying to install some drivers and they need kernel source. I installed kernel source through Synaptic, but the driver installer doesn't find it at the place it expects.
1) Where does Lenny keep the kernel source?
2) Are the kernel sources from Debian and www.kernel.org the same?
3) If I want to download the kernel source manually, where do I get it from?
View 7 Replies
View Related
Mar 1, 2016
I just set up a computer with debian (im no linux expert) and now i have trouble with getting the packages for my graphics card (its an RV635)
Im tried to do it like this page says: [URL]....
However when i try to Code: Select allapt-get update he throws an error:
W: Fehlschlag beim Holen von http://httpredir.debian.org/debian/dists/jessie/Release Erwarteter Eintrag »nonfree/binary-amd64/Packages« konnte in Release-Datei nicht gefunden werden (falscher Eintrag in sources.list oder missgebildete Datei)
View 1 Replies
View Related
Feb 25, 2010
why it is that when I download the sendmail debian source package for etch and build it using dpkg-buildpackage -b -nc I get a 645543 byte sendmail executable whereas when I download the sendmail binary that is 703292 bytes.
View 1 Replies
View Related
Jan 27, 2011
how can i manually modify source.list to include debian repository from shell.since xorg isn't installed yet and the cd doesn't work well.
View 5 Replies
View Related
Mar 30, 2011
Building Wine-1.3.16 for Squeeze from Source: Since there isn't a good version of Wine in the repositories, I decided to build my own from source. Here it is. read everything. I DID NOT have Wine previously installed. If you do, you'll have to remove it FIRST.
[code]...
With all the dependencies installed you can begin building Wine. From the terminal:
[code]...
View 13 Replies
View Related
May 12, 2011
I have a Broadcom BCM4312 LP-PHY in this machine. I was informed theres an open source driver for broadcom cards (brcm80211), but it doesn't seem to support this chipset. In the spirit of Debian, is there another driver available?
View 2 Replies
View Related
Jul 16, 2011
If I want to compile a kernel from source (from kernel.org), including all the drivers I need regardless of their origin, I would not need any firmware-*.deb packages, right? Do the firmware packages add anything that is not present in the latest kernel?
View 3 Replies
View Related
Jun 26, 2011
I'm looking for opensource central management software to manage squeeze workstations.
View 4 Replies
View Related
Feb 24, 2010
Apparently, the wireless adapter Realtek 8171 uses the rtl8192se driver, which is currently available only as source from Realtek's website. Is building a driver equal to building a package? Should I follow the same cautions, say these ones?
View 9 Replies
View Related
Apr 30, 2010
I'm attempting to install ndiswrapper-dkms package. The installation fails due to the following error:Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. dpkg reports that the source is installed
[code]....
I've been searching google for the past couple of days but haven't found anything specific. Any ideas to get me going in the right direction?
uname -a reports
Linux debtop 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686 GNU/Linux
View 5 Replies
View Related
Apr 26, 2011
Squeeze-beta was my first foray into Debian, and I love it. I changed my setup to a rolling setup with testing (Wheezy), and have done that for several months. Lately, I got a new kernel, but it reboots to a terminal rather than GUI (I'm a simple laptop user). I think it's because of the NVIDIA drivers, and here is what I've tried (meanwhile, I'm using the previous kernel):
# apt-get install module-assistant nvidia-kernel-common
# m-a auto-install nvidia-kernel${VERSION}-source
A blue screen appears that says:
module-assistant error message Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use.
You can try:
module-assistant prepare
or
apt-get install linux-headers-2.6.38-2-amd64
I have done both, rebooted, and I still get the blue screen. I also see this message:
nvidia-kernel-source was not built successfully, see:
/var/cache/modass/nvidia-kernel-source*buildlog*
...and I have copy/pasted the file below (which omits lines 101-200 because this message is too long then):
/usr/bin/make -f debian/rules clean
make[1]: Entering directory `/usr/src/modules/nvidia-kernel'
test -f debian/control || cp debian/control.template debian/control
[code]....
View 1 Replies
View Related
Apr 28, 2010
I'm trying to install ov51x-jpeg-source using module assistant but it fails with....
make[3]: Entering directory `/usr/src/linux-headers-2.6.26-2-686'
make[3]: Makefile: No such file or directory
make[3]: *** No rule to make target `Makefile'. Stop.
make[3]: Leaving directory `/usr/src/linux-headers-2.6.26-2-686'
make[2]: *** [all] Error 2
[Code]...
it also stops at the same point when trying to install another driver, /usr/src/linux-headers-2.6.26-2-686 does exist
View 8 Replies
View Related
Oct 17, 2010
How i know who is pinging me or trying?
View 1 Replies
View Related
Jul 16, 2010
I noticed a very very high cpu usage on my webserver. All four CPUs were running on 100%.
Top shows several perl processes from apache that run for a long time, with a high %CPU.
Since the server was fc10, I did a fresh installation to fc13, and the fresh installation didn't have this issue. Then I loaded back all the user-data, and it started again.
Several, 4, 6, 8, ... 100 perl processes from apache.
lsof -p with the pid of such a process
Code:
The estabilished connection is sometimes "proud2pirate.com" wich is a non-existing domain.
View 14 Replies
View Related
Nov 16, 2010
I am looking for openssh 5.1 and 4.3 source rpms. Where can i download them ?
View 3 Replies
View Related
Jan 28, 2011
I am trying to decrease volume of noise coming from computer as much possible, till one point from where I don't know exactly what's the source of noise.
"That noise" starts coming out of computer few seconds about booting, not while POST test, and then it's constant. To me it seems like it's coming out of cpu, but not fan. (I have disconnected all hard drives, have gpu with passive cooling installed, and it's still there. Cpu is AM3 socket AMD Phenom II 810 processor, and motherboard is Asus M4A78T-E.
Also, my other computers with Intel and other AMD processors does not produce such a noise.
Does that noise come out of CPU? is it some "computing sign" of processor (assuming that during first seconds of booting are perfectly quiet), or kind of general problem of AMD (or AM3 socket) cpus.
View 14 Replies
View Related
Apr 14, 2011
where can i find linux kernel source code?
View 4 Replies
View Related
Nov 23, 2010
I'm looking to install, and perhaps create a SlackBuild) for an application that I think might be interesting.
The dependencies listed are:
libx11-dev, libxt-dev, libimlib2-dev, giblib-dev, and libxinerama-dev
I've checked to see if the packages are installed w/:
Code:
I've also looked for any existing SlackBuilds, but the only one that showed up in the database is: "giblib"
Where can I look to find these dependencies, their sources, or determine whether they're already installed in Slackware64 13.1?
Also, how would one determine if this can compile for a 64bit, non multi-lib install?
View 3 Replies
View Related
Jun 23, 2010
First of all, I am pretty new to linux and I have 2 install a USB OVer IP software. I downloaded the software for UBUNTU n I really do not know where to find the installer. I want to find the source code in the package too.. its an open source project. So I believe the source codes are included in that .
View 5 Replies
View Related
May 23, 2011
After several days of searching, reading and re-installing, I'm at a complete loss as to why autofs has suddenly stopped working.
Basically, I can see the shared folders on the host computer but as soon as I try to cd into the folders I get "-bash: cd: [directory]: No such file or directory" (where [directory] = shared drive).
The setup was working before and the same exact setup is being used and is fully functional on another computer.
I'm running Ubuntu 11.04
Here is the content of auto.cifs:
Code:
Here is the content of auto.master
Code:
And credentials are stored in /etc/auto.smb.goblin (where goblin = name of windows computer sharing folders).
When I do "ls -l /home/shoryuken/TerraDrive/goblin" I get:
Code:
Now if I try to "cd" into any of the shared drives (like D-Drive, GW_Share or TerraDrive) I get the following:
Code:
A second or subsequent attempt at "ls -l" results in:
Code:
Note the question marks that are now everywhere.
I'm not sure where to look to find out why this is failing. The shared drive are visible, but then disappear when I try to access them. The same exact setup, on another machine works perfectly fine.
View 7 Replies
View Related
Mar 7, 2011
I have a server (RHEL 4.7) with an mqueue that keeps growing over a two or three day interval. Then I have to manually flush the queue by removing all the mail in the spool directory as the sendmail flush command doesn't work. I've looked at the mail queue manually with a sendmail -bp command and it seems to show an occaisional mail item in the queue. On the other hand, there seems to be a lot more non-legitimate emails in the queue spool. how do I find out the source of the email in the main queue? Next, how do I stop it from building the queue? Next, is there anyway to automatically flush the queue once it builds if I need to?
View 2 Replies
View Related
Jun 7, 2011
I have a situation where I need to install the following packages manually:
libstdc++ (including libstdc++6)
glibc
libgcc
All I can find online are rpms... anybody know where I can get these as tarballs?
View 3 Replies
View Related
May 23, 2011
After several days of searching, reading and re-installing, I'm at a complete loss as to why autofs has suddenly stopped working.
Basically, I can see the shared folders on the host computer but as soon as I try to cd into the folders I get "-bash: cd: [directory]: No such file or directory" (where [directory] = shared drive.
The setup used to work and the exact same setup on another computer computer works flawlessly.
I'm running Ubuntu 11.04
Here is the content of auto.cifs:
Code:
Here is the content of auto.master
Code:
And credentials are stored in /etc/auto.smb.goblin (where goblin = name of windows computer sharing folders.
When I do "ls -l /home/shoryuken/TerraDrive/goblin" I get:
Code:
Now if I try to "cd" into any of the shared drives (like D-Drive, GW_Share or TerraDrive) I get the following:
Code:
A second or subsequent attempt at "ls -l" results in:
Code:
Note the question marks that are now everywhere.
I'm not sure where to look to find out why this is failing. The shared drive are visible, but then disappear when I try to access them. The same exact setup, on another machine works perfectly fine.
View 4 Replies
View Related
