I may not searched deeply enough but is somewhere desribed what variables are available in debian/rules package build script generated by dh_make ? I know about CURDIR f.E. but what about package Version (defined in debian/control) ?
View 2 RepliesI recently tossed Ubuntu for Debian Unstable for my personal machines and I'm having trouble building Emerald into a package. I've already configured and installed the package (using the usual ./configure, make, make install) but I wanted to make a deb for future use (for myself and for others). However every time I try to run dpkg-build I get the following error message.
dh_install -pemerald --sourcedir=debian/tmp
dh_install: emerald missing files (usr/bin/*), aborting
make: *** [binary-install/emerald] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2
[Code]...
I'm using Debian 8 and I have ipset v6.23 and iptables v1.4.21. I put a rule with ipset in rules.v4 file and then I restart the iptables with netfilter-persistent service. When I reboot the iptables list is empty. But if in the file I don't put a rule with ipset, after reboot the iptables list is correct.
View 4 Replies View RelatedI have SSD drives without SCT support, because of this I want to tune /sys/block/device-name/device/timeout in order to force mdadm put these drives offline. So, I can see my drive like this:
/dev/disk/by-id/ata-OCZ-SABER1000_A22MJ061512000074.
Where can I tune /sys/block/device-name/device/timeout from 30 to 7 sec only for these drive? I don't want to use rc.local.
Can I create right udev rules for it in /etc/udev/rules.d?
I want to avoid any conflict with /lib/udev/rules.d.
Code: Select all# udevadm monitor --environment --udev
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
UDEV [9302.549485] add   /devices/pci0000:00/0000:00:01.2/0000:03:00.0/host0/target0:0:0 (scsi)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:01.2/0000:03:00.0/host0/target0:0:0
DEVTYPE=scsi_target
SEQNUM=5210
SUBSYSTEM=scsi
[Code] ....
I'm having some trouble with the configuration of the iptables. I want to setup a network server to serve as Fail Over (for my 2 ISPs), DHCP and DNS. I have 3 network cards, 2 connected to ISP's routers and 1 that serves as UPLINK for my switch.
I want to add some Iptables rules so I can achieve what I want to do. The problem is that the rules I try to use, they have to effect.... they don't load, here are the rules I am trying to add:
#iptables --table nat --append POSTROUTING --out-interface eth1 -j MASQUERADE
#iptables --table nat --append POSTROUTING --out-interface eth2 -j MASQUERADE
#iptables --table nat --append POSTROUTING --out-interface eth2 -j SNAT --to EXTIP
When I try to check to see if it loads, with the command:
#iptables -L
It returns empty
I'm trying to allow non-root account to use avrdude to program mucrocontrollers. There are many articles online about how to do that, but it seems not to work for me. Every time i try to execute avrdude it says "permission denied". Here's "$ udevadm info --name=/dev/bus/usb/002/011 --attribute-walk" says looking at device '/devices/pci0000:00/0000:00:1d.1/usb2/2-1':
KERNEL=="2-1"
SUBSYSTEM=="usb"
DRIVER=="usb"
ATTR{configuration}==""
[code]....
However, after restarting udev, replugging the device, even rebooting the computer I still get "permission denied". The Vendor and Product match, so what's the problem?
I'm newbie on Debian, and I just installed Debian 8.2. (I used to run openSuse, and I see Debian is quite different.)
Where should I set environment variables (like PATH or JAVA_HOME) in order to affect all users?
I read some documentation about that, but It is not clear for me, the difference among "/etc/environment", "/etc/bash.bashrc" and "/etc/profile".
(In openSuse, I used to create a file "/etc/bash.bashrc.local" and set the environment variables there, in order these settings are not lost with updates.)
After yesterdays upgrade of Squeeze, my Synaptics touchpad's udev configuration is ignored on my EeePC. It was working fine before. Are there any changes in how it is supposed to be configured or is it just broken?
View 3 Replies View RelatedI edited /etc/profile to look like:
# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
if [ "`id -u`" -eq 0 ]; then
[code]....
When i type env, it just shows: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin It also shows JAVA_HOME, CLASSPATH and others were set up. Trying to get updatetool in glassfish usable for any user and during any session. I did the export command in a shell, and it worked, but not after closing the session. how to do environment variables.
I'm trying to use these cookie cutter rules that I found. But every time I use them, after a few seconds my wifi connection goes dead. The exception was the first time I used then. Which lasted me a couple of minutes.
By dead I mean I can no longer open a webpage or ping google.
iptables -N LOGGING
iptables -A INPUT -j LOGGING
iptables -A OUTPUT -j LOGGING
iptables -A LOGGING -m limit --limit 2/min -j LOG --log-prefix "IPTables-Dropped: " --log-level 4
iptables -A LOGGING -j DROP
I need to create filename 70-android.rules in the directory /etc/udev/rules.d/I have Adm privileges in my user account properties, but when I use sudo to create this file the Ubuntu OS does not allow me the privilege... I am running Ubuntu 10.04 LTS and here's the Terminal output below:daddy@gatomon-laptop:/etc/udev/rules.d$ sudo cat > 70-android.rulesbash: 70-android.rules: Permission denieddaddy@gatomon-laptop:/etc/udev$ ls -ltotal 8drwxr-xr-x 2 root root 4096 2011-03-16 18:03 rules.d-rw-r--r-- 1 root root 218 2010-04-19 04:30 udev.conf
View 2 Replies View Relatedmkvmerge -o <filename without extension>_TV.mkv -S <filename> && mkvextract tracks <filename> 3:<filename without extension>.*** && perl /home/brian/Desktop/ass2srt.pl <filename without extension>.*** && rm <filename without extension>.***
Doing these commands for multiple command line file inputs is the goal. So I can just type ./script.sh *.mkv in my terminal.This is what I have so far, but it doesn't work whatsoever.
I just installed ufw and made some rules :-
Code: Select all$ sudo ufw enable
$ sudo ufw default deny
$ sudo ufw allow 80,443/tcp
Now this gives the following :-
Code: Select allRule added
Rule added (v6)
Now is there anyway to tell it to NOT add the v6 rules (of course over time v6 will become the new standard and I'll have to upgrade my router and all) but till my ISP doesn't I just want to make it easy for myself.
I could install gufw and just take that rule out but wanted to know if there was a way to do that via CLI .
Still training with packaging. Here: [url]
I found the lintian reports about blackbox.
Most of them i could get sorted (via wild edits in the debian/{rules,control} files.
I am stuck at this error: [url]
I was told to read dh_link, but it doesn't say much.
My main problem is that i don't understand the rules file.
Hence a short question: If i got a rules which looks like this: #!/usr/bin/make -f
If i try it with gtk-theme-switch and with gtk2-engines-magicchicken i get syntax like the first example (blackbox -unedited,if i must i can replace it with the edited version), my working example-files use the syntax of the second example.
Since I have been using grub-legacy in quite an unorthodox manner, and ironically, getting benefits that an otherwise obedient user wouldn't even dream of getting, this question may, most probably, pose a challenge to all those who don't understand the filthy tricks of grub. So, here I am, trying to install grub, in a manner, that makes it independent of all operating systems on my computer. As I understand it, a bootloader is so important, especially when it is used to boot multiple OSs, that I deem it mandatory for it to be installed in a manner making it independent of all operating systems it is used for.
What I did till now:I have a 24 Mega Byte partition to which I copied /boot/grub/*I run the command: # grub-install --root-directory=/mounted-partition-holding-the-copied-files '(hd0)'Grub boots, but the menus are not displayed presenting me with a cute shell with limited commands. My next strategy in this battle, is to copy the device.map and grub.cfg files from a working installation - a sort of a heart transplant.
I'm trying to build the package "minitunes" [url] but when I attempt the code:
The build exits with the code dpkg-buildpackage: error: fakeroot debian/rules binary gave error exit status 2
This actually happens when I try to build any package with "dh_make" so I'm wondering if it is because of my debian/rules file, which I'm not so certain how to edit.
What should actually be in such a file? I have mine posted below for the minitunes package debian/rules:
I have a certain number, let's say $n, of input files *.inp for a software i use.
For each of them I'll get an output file, *.out.
These output files are, all together, an input for a second software I use.
For this reasons, I collect all the output files in a folder, let's say pop_folder.
Before I run the second software I have to make sure that the first one runs successfully and all .out files joined the pop_folder.
I'm trying something like that:
It seems that my if condition is true despite the actual values of $n and $m.
How can we do a file replacing string on debian/rules file using sed and bash variable ? I don't seem to be able to do so. I have tried below under the install section with arch dependent amd64, as far as I know all the bash commands are allowed to be executed in debian/rules file.
I have tried this :
Code: Select all
debian/rules file
ipaddr=`<long command to find ipaddr>`
myVar=`hostname`
sed -i -e 's/somestring/'$myVar'/g' $(configs)*
sed -i -e "s/somestring/$myVar/g" $(configs)*
[Code]...
Nothing works. Sed works but the hostname replacement doesn't work.
I am using Debian Squeeze on my laptop an now I want to write udev rules. I bought an USB enclosure for my old Desktop HDD drive (Debian lenny ). But when I plug it in only the first primary partition gets mounted so I can not copy the data from my old desktop to the laptop. the output of mount shows that the following disk was mounted/dev/sdb1 on /media/disk type ext3 (rw,nosuid,nodev,uhelper=hal)
I can cd into /media/disk/etc and cat fstab shows the following:
# /etc/fstab: static file system information.
#
[code]...
I'm trying to compile Ardour on jessie amd64 using the Debian source code (there's already an ardour package but I want to use different compile options). I've applied the Debian patches and have all the required dependencies installed.
Scons quits with a KeyError message from python2.7 saying that os.environ['DEB_HOST_ARCH_OS'] is not defined.
Checking with 'dpkg-archtecture -l' shows that DEB_HOST_ARCH_OS=linux, but 'print os.environ["DEB_HOST_ARCH_OS"]' in python says that name 'os' is not defined. The scons script has 'import os' at the top so it should be seeing it.
How do I make this visible to python (I'm assuming this problem is specific to the jessie python2.7 installation and not python in general)?
I'm trying to write udev rules to make it easier to recognize the network cards in my server. After a reboot it doesn't seem to take place, what am I doing wrong? I'm running Debian Squeeze stable.
Code:
$ uname -a
Linux debian 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64 GNU/Linux
Code:
# ls -l /etc/udev/rules.d/
total 4
[Code]...
I should create a sqeeze image and install it on other computers.Udev should detect network card (NIC) module and load it automatically at startup.How I understand /lib/udev/rules.d/75-persistent-net-generator.rules runs when udev starts, then writes to /etc/udev/rules.d/70-persistent-net.rules.The problem is, udev searches for this NIC on other hardware and the network cannot start.I can solve this problem easily using a startup script to delete /etc/udev/rules.d/70-persistent-net.rules file.
View 2 Replies View RelatedI installed debian 8 on a usb drive using this guide. I used a debian 8.2 64-bit image with mate. It has all worked as I wanted it to. However recently I needed to change the PATH variable, and create another environment variable. I have not been able to do neither. What I have tryed (from google):
1. adding "export PATH=$PATH:/xxxx/" to etc/profile or to /home/user/.profile
2. adding ":/xxxx/" to a point in /etc/profile where the PATH variable is set
3. creating a script in /etc/profile.d which run "export PATH=$PATH:/xxxx/"
(where xxxx is the the location i want to add)
im using Debian (lenny) with 2.6.26 kernel, I'm trying to write udev rules in order to automount my usb pendrive, so I added this rules in udev:
SUBSYSTEM=="block", SUBSYSTEMS=="scsi",ATTRS{vendor}=="OTi ",
ATTRS{model}=="Flash Disk ", NAME="penna128M",RUN="/usr/bin/
pmount /dev/penna128M"
I use pmount to install the device as normal user If i connect my device to the usb port I don't see nothing in /media/penna128M, BUT giving at the prompt cat /etc/mtab the last line is:
/dev/penna128M /media/penna128M vfat rw,noexec,nosuid,nodev 0 0
The line in fstab about this pendrive is:
/dev/penna128M /media/penna128Mvfatdefaults,user,owner,auto00
I've created live squeeze usb-hdd and if I boot first time the udev system writes the MAC address of the network interfaces into /etc/udev/rules.d/70-persistent-net.rules.Because I use full persistence, the file is there on the next boot and I don't get network running automatically on other computers. My problem is, howto remove 70-persistent-net.rules every time during the startup?
View 5 Replies View RelatedAfter a system update a couple of days back - which as far as I can remember included some xorg packages - neither of the policy files I have written for my keyboard, synaptics touchpad and mouse work.Below are the files and the Xorg log file.
99-x11-keyboard.fdi
<?xml version="1.0" encoding="UTF-8"?>
<deviceinfo version="0.2">
[code]...
Consolidate several lines of a CSV file with firewall rules, in order to parse them easier?
I have a .csv file, which I created using an HTML export from a Check Point firewall. The objective is to have all the firewall configuration lines where a given host is present. I have to do this for a few hundred, manually is not a reasonable option. I'm going to write a simple Python script for this.
The problem is that the output from the Check Point firewall is complicated to work with. If a firewall rule works with several source or destination hosts, services or other configurations, instead of having them separated with a symbol other than a comma, I get a new line.
This prevents me from exporting the line where the host is present, since I would be missing info.
Let me show you an example, hostnames are modified, of course:
NO.;NAME;SOURCE;DESTINATION;VPN**;SERVICE;ACTION;TRACK;INSTALL ON;TIME;COMMENT
1;;fwxcluster;mcast_vrrp;;vrrp;accept;Log;fwxcluster;Any;"VRRP;;*Comment suppressed*
;;;;;igmp;;;;;
2;;fwxcluster;fwxcluster;;FireWall;accept;Log;fwxcluster;Any;"Management FWg;*Comment suppressed*
;;fwmgmpe;fwmgmpe;;ssh;;;;;
;;fwmgm;fwmgm;;;;;;;
3;NTP;G_NTP_Clients;cmm_ntpserver_pe01;;ntp;accept;None;fwxcluster;Any;*Comment suppressed*
;;;cmm_ntpserver_pe02;;;;;;;
I am trying to create scripts to move files over from one directory to an ftp server and there is this one file with spaces that bash is see each word as being a file, here is the variable i am trying to use:
Code: Select allLOCL = '/mnt/cifs/"File name with spaces"/'
cd $LOCL
ls -l
I need assistance with my Snort Installation. I used Bodhi Zazen's Network Intrusion Detection System post and found it easier than the previous time I had done it. I am currently running Ubuntu 10.04 server and Snort 2.8.6.1 with BASE 1.4.5. I followed Bodhi Zazen's instructions and when I tested snort it ended with a Fatal Error due to ERROR: /etc/snort/rules/exploit.rules(264) => 'fast_pattern' does not take an argument
Fatal Error, Quitting.. Here is the entire output once I ran the test command: snort -c /etc/snort/snort.con -T Running in Test mode
[Code]...
UUIDs make fstab hard to read, so.. Is it possible to use udev rules to prevent HDs to change device, instead of using UUID in /etc/fstab?
View 2 Replies View Related