Which virtual machine in Red Hat now pushing (championing)? And is it supported on CentOS yet? Does it support multiple cores in the guest and does it take advantage of hardware visualization?
View 4 RepliesI have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View RelatedI want to add more than one Virtual IP to my CentOS machine. I was able to add one ver easily by creating a file ifcfg-eth0:1 and editing the IPADDR field. But I cannot create more by creating a ifcfg:eth0:2, for example.
View 3 Replies View RelatedWhere can i download an image file of centos for running it in wmware ?
View 4 Replies View Relatedwe are going to implement a virtual environment and I would like to install freenx on a virtual machine.
View 2 Replies View RelatedI am newbie to centos. I am trying to install virtual server in my machine. I have installed the Xen virtual machine monitor which comes with CentOS through add/remove software. Here is the problem, I am unable to open connection with Xen hypervisor. Here is the error i am facing:
Unable to open a connection to the Xen hypervisor/daemon. code...
I installed the Centos 5.5 with XEN and put 03 virtual machines (Centos 5.5 too). I did this correctly, but I have a problem. In the virtual machine, I need update the kernel. I used "yum update kernel" and this is downloaded correctly and the menu.lst file is updated too, but the kernel not ran. I ran "grub-install /dev/sda" or "grub-install /dev/xvda" and received a error return. I read the device.map file and i ran "grub-install /dev/sde" and received a error return too.
The errors:
[root@vm01 ~]# grub-install /dev/sda
/dev/sda: Not found or not a block device.
[root@vm01 ~]# grub-install /dev/sde
/dev/sda1 does not have any corresponding BIOS drive.
[root@vm01 ~]# grub-install /dev/xvda
/dev/xvda: Not found or not a block device.
I had set up 4 virtual machines on centos 5.5 system where I directed the image locations to an external storage. I have lost the image files in the storage, but I have the image files that were copied from the virtual machine image location. I want to put up the same system on the same computer by copying these backup images. However, when I copy the image file to the same exact location and start the corresponding virtual machine I get "no bootable disk" error. When I increase the size of the image using "qemu-img" commands, I can get rid of this error, but get "error reading disk" error. Is there a way to overcome these problems, or is it not possible to restore a virtual machine by copying the machine image file under ..../xen/images?
View 1 Replies View RelatedI need start a virtual machine (Virtual Box) when when my server centos is turned on or start.
View 6 Replies View RelatedI am encountering some problems regarding CentOS 5 and I am going to kindly ask your help in debugging further what is happening. I will give as much information as possible about the setup. Here we go. We use on one server of our servers, GOautodial, an inbound/outbound call center application, that it's installed on a CentOS 5.5 (Final).
# cat /etc/*release*
cat: /etc/lsb-release.d: Is a directory
CentOS release 5.5 (Final)
GoAutoDial CE 2.0
# uname -a
Linux xxxxx.com 2.6.18-194.8.1.el5.goPAE #1 SMP Fri Jul 30 05:30:57 EDT 2010 i686 i686 i386 GNU/Linux
Running Fedora 10, I installed CentOS 5 in Virtualbox, but I can't ping the Virtual Machine...
From within CentOS, I can ping my laptop [known as the host?] but from the laptop I can't ping the CentOS Virtual Machine. I tried turning off the firewall on both too... CentOS was able to access the internet through my laptop right away without any configurations too.
Unless someone has an idea to resolve the above, I am also wondering about something else VirtualBox-related:
To see if it was possible to get around the above issue, I was going to install another CentOS virtual machine to see if I can get them to communicate both ways [if at all], but to do so, I think I have to install CentOS AGAIN on another allocated amount of hard disk space. This will take some time, so I was wondering if anyone knew if it was possible to just create a quick duplicate of the previous installation, if you wanted 2 different virtual installations of the same OS.
I'm running CentOS 5.5 x64 and have just installed VMWare Server 1. I am able to create a new Virtual Machine, but when I go to power on the VM in order to install the OS (windows server 2003), either the host crashes/reboots (with "Run in Debugging Mode" turned on) or the VM simply does not start (with that Debugging box unchecked) and in the log there is an error along the lines of VMware Server unrecoverable error (vmx)
View 1 Replies View RelatedI'm trying to set up a virtual machine environment in Centos5.5. My hardware fully supports virtualization, and I'm running qemu as the hypervisor with Virtual Machine Manager as the GUI to manage and create VMs. Host hardware is a Dell PowerEdge T710, with a quad core Xenon processor and four 1TB disks in a raid 6 array.
Within the Virtual Machine Manager when trying to create a new VM, there is the option to not "allocate entire virtual disk now". What format is created when you "allocate entire virtual disk now" and when you don't?
I want to create a qcow2 image format, but it doesn't look like it is supported. Does anybody know how to create a VM with a qcow2 image format?
When you create a blank disk with "qemu-img create -f qcow2 disk.qcow2 3700G", it indeed does create a qcow2 image. However, Virtual Machine Manager is unable to read these images, claiming that it is 15 megs or so in size (which is what it actually occupies in host disk space until you try and put a VM into it).
I have CentOS 5.5 and try to create KVM virtual machine with CentOS 5.5 as a guest. But when I exec command:
virt-install --connect qemu:///system --name test --ram 1024 --file=/var/lib/libvirt/images/test.img --file-size=10 --vnc --cdrom=/var/lib/libvirt/images/CentOS-5.5-x86_64-bin-DVD-1of2.iso --vncport=10000 --accelerate --os-type=linux --nonsparse --livecd --hvm
Ive seen this a hundred times while searching google but I can't seem to get any of the fixes suggested to work for me.
Here are the specs code...
I have other servers on the same network with the same software/hardware that never loses its mount to the windows share, and nightly backups are run through those mounts. So why does the mount on this machine fail when we do a push? The only conclusion that I can come to is there is some sort of time out on the windows server that causes this. The other servers that have this same type mount use their share every night, where as the share on this server gets used once or twice a week. Once the mount hangs I can not unmount it, I have to reboot the server. Once the server is rebooted the push works fine. But then the next week when a push is tried it hangs. What else can I check?
UPDATE: I've also tried NFS mounts and autofs mounts and they hang as well
I enabled logging by echo 1 > cifsFYI and this is what I see in var/log/message code...
Ive removed the actual file names for security concerns. Any one have ideas as to why this is happening? The only other thing I can think of to try is to swap out the NIC but it's at a remote location so I can't do that right now.
Can I copy my virtual box VM windows XP virtual-machine files to another Linux computer and run the machine on that computer while I keep on running it on the original computer?
This question is about technical possibilities, not licences.
how to use CTRL-ALT-DELETE on a virtual Windows machine on my Virtual Box?
View 2 Replies View RelatedHow do I program a virtual machine to auto-start/boot upon boot up of the host system? I am experimenting with SNORT network intrusion detection system and have installed it inside a virtual ubuntu box which I want to start automatically.
View 1 Replies View RelatedI read once that you could use VMWare's converter to convert a physical machine into a virtual machine to run in VirtualBox. Can someone point me in the direction of a tutorial or just give me instructions on how to do this? I was very confused by the converter and how to get the image to work with virtualbox.
View 1 Replies View RelatedI have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies View RelatedI have Linux server with VMware Server 1.0.8. When I creating a virtual machine, I can not "send" a PING to the virtual machine. In the virtual machine, I have installed CentOS 5.3 (32bit). In the virtual machine I have defined the addresses IP. So, whey I can't "sent" a ping to the virtual machie? I have to set something on the Linux server?
View 3 Replies View RelatedWhy i cant install a new virtual machine from dvd/cd only via network install and which install media url i must paste in the option to install debian or Suse or redhat.
View 3 Replies View RelatedI want to create a virtual host and virtual ip in proftpd linux centos. can anyone please help me on this,I'm new in linux.
View 8 Replies View Relatedhow do I set up a virtual machine in Fedora 14? Do I do it through Quemu? I did not see Virtualboxose within the repositories. If some one would be so kind as to instruct me (please simple step by step instructions for setting up a virtual machine or for downloading and installing Virtualboxose or any other version of Virtualbox I would forever be indebted to you. I would like to install Fedora on my laptop instead of Ultimate Edition 2.8 of which I am getting tired of any Ubuntu based distribution.Oh by the way I tried the new Gnome 3.0 shell with Laughlin 15 and I was impressed. I can't wait til it is released. Also could someone point me in the right direction as to where I might ask, request, or just offer suggestions for software packages to be placed within the repositories.
View 8 Replies View RelatedI have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
I'm having some issues with a windows virtual machine. The system is Fedora 11 and the virtual machine is Windows 2008 Server. If I start the virtual machine from the virtual machine manager, it only has a single cpu despite my setting it to eight. If I start the machine from the command line, I can get four cpus but not eight. In both cases windows seem to display the eight cpus in the device manager (or whatever program it is). It has been suggest that windows was imaged on a four core machine before being loaded on the eight core machine and that something in windows is maxing at four cores. But that doesn't explain why the virtual machine manager can only start one cpu. I just played around on my home machine with a fedora 10 live cd and it recognized the two cores on that machine and used them from the virtual machine manager without problem. Also upped it to three cpus without problem.
View 2 Replies View RelatedI have a reader program which runs only in windows. Now I have a windows xp installation iso on one of the partitions. How can I set up a virtual machine environment of windows xp, so that I can run windows programs?
I've tried wine but I cannot figured that out. I think a virtual machine is the choice. but do I also need install those drivers and microsoft stuff, like direct X 10?
I have been unable to create any type of Windows VM in Xen. Every time it tells me that the processor(s) in the machine do not support full virtualization. After some research, I found several articles regarding the vmx setting in /proc/cpuinfo not showing up when the xen kernel is booted versus it showing up in the default kernel. Of course, I am not seeing the vmx extension in /proc/cpuinfo after I boot to the xen kernel. In the other posts where other people are in the same situation, the only resolution is to upgrade to the 2.6.16 xen kernel. I am already past that:
linux-vxke:~ # uname -r
2.6.31.8-0.1-xen
yet I am still unable to create any form of Windows VM. I have even seen that some people are able to create a partially virtualized Windows VM, and they report that the message is only a warning. However, I am unable to get past this message. I am running a Dell Optiplex 760 with an Intel Core 2 Duo E7300, and I have the VT-x setting enabled in the BIOS. Has anyone else seen this situation or have any thoughts on why this is happening?
I have openSUSE 11.2 x64 natively installed on my PC.
What is the best virtual machine that I can run on openSUSE in order to run XP Pro x64 and Windows 7 x64.
By best I mean opensource, lightweight, and stable.