CentOS 5 :: Unable To Read USB Drive?

Mar 27, 2009

when i put my USB HD in the box which has centos 5.2 it says Cannot mount volume The volume freeagent drive uses the ntfs filesystem which is not supported by your system.

View 4 Replies


ADVERTISEMENT

SUSE :: Unable To Boot Properly - System Is Unable To Read Startup Information From Hard Drive

Jan 19, 2011

I am running the latest suse release downloaded directly from their website. I ran the installation after buring the dvd and everything seemed to be working fine. after the installation i ran updates and used it for a little bit. When i shut it down that night and went to restart it I got an error that stated the OS wasnt there. I then went through the installation and everything and it retained the information from the installation before (web history etc.) but for some reason every time I reboot or shut it down the system is not able to read the startup information from the hard drive and will not come on without me re installing it.

View 9 Replies View Related

Ubuntu :: Cannot Format FC Hard Drive - Unable To Read

Sep 8, 2010

Below is results from attempt at formatting my hard drive. As you can see a driver is installed, but not working. Perhaps something is missing? Seems a bit odd that a "unable to read" comes back when disk data is reported. The drive just went through a low level format. BTW this is a fiber channel drive. Also on board are 5 scsi drives. Adaptec raid card. Not sure if that would have any relevance, but there you are.

barry@vm1:~$ sudo lshw -C disk
*-disk
description: SCSI Disk
product: ST173404 CLAR72
vendor: SEAGATE
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: 3A98
serial: 3CE0SRYL00007142FHAW
capacity: 67GiB (72GB)
capabilities: 10000rpm
configuration: ansiversion=3
barry@vm1:~$ sudo fdisk /dev/sdb
Unable to read /dev/sdb .....

View 4 Replies View Related

Ubuntu :: Unable To Stop Drive And Read Only File System

Oct 19, 2010

Every time when I right click the USB drive icon and select "Safely remove drive" I always get this error message

FAILED: No such file or directory
even though the icon does disappear from the desk top. I have been ignoring it since the USB drive seems working fine.Now I have a more serious problem. When I tried to copy files onto the USB drive it says "read only file system" and doesn't let me. I tried unplug and plug the USB key but that doesn't help.

View 5 Replies View Related

CentOS 5 :: Mount USB NTFS Drive Read/write?

Apr 6, 2010

After installing the "fuse" and "fuse-ntfs-3g" packages, my ntfs formatted thumb drive mounts read only, as follows:# mount.../dev/sdb1 on /media/disk type fuseblk (rw,noexec,nosuid,nodev,allow_other,default_permissions,blksize=4096)

View 17 Replies View Related

Ubuntu :: Hhd Format Error \ Unable To Read The Folders Or Files In The Drive?

Jan 15, 2010

i was trying to format one drive, accidentally formated another, told the format process to stop, and i'm unable to read the folders or files in the drive. i see some greek, odd symbols... But cant open the folders.

View 8 Replies View Related

General :: Usb Flash Drive Error / Unable To Read Mount Point

Nov 18, 2010

Also I have all files it asks for installed including dostools..Btw I used usb creator, then went to gparted and did something. The system is fat 32 now but with same message, not including ext4 part. Just the mount point message, and something about dosftools and mtools, wihich also are installed.

View 4 Replies View Related

CentOS 5 :: EXT3-fs : Unable To Read Superblock / Enable This?

Sep 27, 2010

I am unable to boot my server and it is erroring with the message "Kernel panic - not syncing: Attempted to kill init!". Here are the details:

I have a brand new Dell PowerEdge T110 server with Quad-Core Xeon CPU and 2GB 1333MHz RAM. I have installed a hard disk (SATA, 7.2rpm) on this machine that I removed from another Dell PowerEdge T100 server with Dual-Core Xeon CPU that was running software RAID 1.

Now when I boot the new T110 server, it displays the following error messages code...

I am running CentOs v5.5 x86-64. If I put the hard disk back into T100, it boots fine. I do not know why it is not working with T110 server.

View 6 Replies View Related

CentOS 5 :: Install The Reiserfs Drivers To Read / Write To External Drive?

Jul 20, 2009

I am trying to install the reiserfs drivers to read/write to my external drive. But keep getting command not found. Although the system can get man pages for modprobe.

modprobe reiserfs
bash: modprobe: command not found

I also need to know how to add myself to the sudoers file. I have already tried visudo but this has not worked.

View 1 Replies View Related

CentOS 5 :: EXT3-fs: Unable To Read Superblock And Kernel Panic

Aug 15, 2011

I got a CentOS server + KDE from a server (which I had no contact until now), he had 2 HD's one for the system and another for files.

I brought the HD system home to try to make it run on a virual machine (VMware) so I can do some testing before you put in practice.

But already converted the VMware HD to the system, it tries to start but it shows some errors and in a message "kernel panic - not syncing: attemped to kill init"

I think the drivers are correct, has edited the file "/ etc / modprobe.conf" edited these entries equal to another I installed CentOS on VMware.

alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptspi
ata_piix alias scsi_hostadapter2

Look at the picture attached the full error.

Link to large image
Link to large image

View 1 Replies View Related

General :: Installing To A Wiped Hard Drive / "unable To Read" Errors?

May 14, 2010

I recently got a computer donated to me for free from my Computer Science class, as the teacher couldn't figure out what the problem was that was preventing him from booting to the startup screen (all I could figure out was that the slot the memory card was in was bad, so I switched slots and got it working). The hard drive on the computer was wiped with a disk nuker called DBAN. Now I would like to install a Linux OS on the computer, but whatever disc or distro I try gives me similar "unable to read" errors. I would like to know if there's anything software-wise I need to do before attempting to replace any hardware. An example of the error I'm getting is as follows (using a mandriva livecd):

/etc/rc.d/rc.sysinit: line 1281: /var/log/dmesy: Read-only file system
SQUASHFS error: sb_bread failed reading block 0xa6e58
SQUASHFS error: unable to read cache block [29b963ea:782]
SQUASHFS error: unable to read directory block [29b963ea:782]

Anyone know what I need to do to get this fixed so that I can install a Linux distro?

View 5 Replies View Related

Ubuntu :: Read A Usb Flash Drive In The Windows O/S I Want To Read Mp3 Player?

Aug 5, 2011

Ubuntu main O/S windows 7 running in Virtualbox how or can i read a usb flash drive in the windows O/S i want to read my mp3 player

View 4 Replies View Related

CentOS 5 :: Unable To Write To USB Drive

Oct 7, 2009

I have have Centos 5.3 which does not save files to USB drives. after copying over file to an empty drive the files are shown on the drive and can be opened and edited but when the drive is removed and reinserted the drive is empty again even though I have told the it to remove the device. I suspect that the file cache is not being flushed correctly. Is there a way of checking this and forcing it to flush the file cache if this is the problem?

View 4 Replies View Related

CentOS 5 Hardware :: Unable To Enable DMA On Boot Drive

Feb 13, 2011

I am running a CentOS Server (v5.5 x64, with latest CentOS kernel)

The problem is that I cannot enable DMA on my boot drive. My boot drive is an IDE SSD. All my other hard drives are SATA:

/dev/hda = IDE/ATA
dev/sda - /dev/sdf = SATA
---
/dev/sda - /dev/sdd = RAID5 for storage
/dev/sde+/dev/sdf = RAID1 for storage

[Code]....

View 6 Replies View Related

Ubuntu :: Unable To Read DVDs, Able To Read CDs?

Mar 15, 2011

The titles says about everything. CD's are perfectly automounted.WhenI insert a DVD however (I tried various DVDs), absolutely nothing happens, as if I would have inserted nothing or a blank DVD.I already read lots of threads and nothing o help... Here are the outputs of a few commands that might or might not be useful.A line I added myself in fstab which appears completely useless:

Code:
/dev/sr0 /media/dvd auto utf8,user,noauto,exec 0 0
Code:

[code]...

View 4 Replies View Related

Ubuntu :: Can't Load A Drive / Volume - "Unable To Mount Location Error Mounting: Mount: /dev/sda1: Can't Read Superblock"

Dec 25, 2010

I have a problem in my ubuntu 10.01 that it can't load a drive/volume in ubuntu. When I tried, it said: "Unable to mount location Error mounting: mount: /dev/sda1: can't read superblock". And when I boot my pc with 'Windows', it said : "UNMOUNTABLE_BOOT_VOLUME" under a blue screen. What can I do to solve this problem?

View 9 Replies View Related

Installation :: 8GB Flash Drive Because My D Drive Doesn't Read DVDs?

Jun 20, 2010

I bought an 8GB flash drive because my D drive doesn't read DVDs. Anyway, my goal is to install Linux ubuntu and have it be my OS (replacing Windows XP). Last night I went to the Ubuntu homepage and downloaded the Ubuntu desktop edition 32-bit and put it on my flash drive. I followed the instructions on how to open and run it, but I was never asked about whether I want Linux to run side by side with Windows or if I want it to replace Windows. It downloaded the whole program, my computer restarted and then (on a black screen) it asked if I wanted to use Windows XP Home Edition or Linux Ubuntu. It's really frustrating because it took a while to download and install it in the first place AND to top that off, when I tried to use Ubuntu it went to a black screen and at the top said that there was an error. So I uninstalled all the ubuntu program and software and now I have a clean slate and want to try this again. I am a complete n00b. Could someone please walk me through how I can go about downloading (w/ links plz), installing and making ubuntu my ONLY OS on my computer via a flash drive? I'm desperate and I don't want to go through all of that and make the same mistake again!

View 9 Replies View Related

Ubuntu :: Hard Drive Set As Read Only?

Jan 19, 2010

I set up a server using ubuntu 9.10, with two hard drives in a hardware Raid 1 setup and with two more drives for recurring backups. The problem is that the two drives for backup are set to read only and won't allow me to change the permissions even when logged in as root. I have tried putting "rw" into the "fstab" file with no luck, I have also tried running "gksudo nautilus" and "fsck -r /dev/sdc" but still have the same message that I don't have the necessary permissions to complete the task.

**I just tried erasing the data on the disk and creating a new partition, the disk utility allowed me to erase the data and create FAT32 partitions with the same permission problems but would not allow an EXT partition or NTFS partition (it would give and error message stating:"Error creating file system: helper exited with exit code 1: helper failed with:mke2fs 1.41.9 (22-Aug-2009)")**

***I fixed the problem by fixing a formating problem in fstab and reformatting the drives to ext4.(the fstab had a problem with the way that I broke up the lines when I input the info for the new drives, and I didn't realize it until I maximized the window in gedit.)***

View 1 Replies View Related

Ubuntu :: USB Drive Appears As Read-only

Mar 6, 2010

I have a Coby MP3 player which functions as a USB drive. It has always worked fine, both on Ubuntu Karmic and on the Windows (booted from another disk).

Now, in Ubuntu, it appears as read-only (but it works fine when I boot into Windows on the same machine). How can I deal with this? It's not a matter of my fstab, which I have never manually edited; the USB device is always auto-detected.

View 4 Replies View Related

Ubuntu :: Burn DVD With A Read Only Drive?

May 3, 2010

Since I started using Linux I've learned that almost anything is possible with a little tweaking, so I was just wondering that if I have a CD-RW/DVD-ROM drive on my laptop, is there any way to make it write to a DVD instead of just reading it? I know it's a long shot, but since the drive can write to a CD, I don't see a reason why it couldn't write to a DVD somehow.

View 7 Replies View Related

Ubuntu :: CD-RW Drive Defined As Read Only?

Jun 22, 2010

I have Ubuntu 10.04 installed on an Armada laptop with a Teac CD-W24E installed. This drive can handle cd, cd-r and cd-rw, however the cd/dvd writer and hence Brasero detects it as read only. So no possibility to write!! Also, when I load a blank disk the cd drive icon disapears from the file browser page . The disk utility program detects the loaded empty disk, but can not format it (read only) With F3b I can write to the drive, but only once (takes up the total disc), no multiple sessions. So where does F3b gets its drive definition from? My question is, is this read only forced by the kernel, or is there a file that i can edit in order to make it read/write and usable by Brasero? I prefer Brasero, because with the latest update it now allows easely multisession while I can stil not achieve it with K3b

View 1 Replies View Related

Ubuntu :: Cannot Read USB Portable Drive

Jan 7, 2011

I removed my old 160Gb laptop drive to install a new 320Gb drive. The 160Gb drive is partitioned as follows: 20Gb unallocated partition, 115Gb ext3 partition (running ubuntu 10.04), and 5Gb swap.

I placed this drive in a portable enclosure so that I could retrieve data from it. The Disk Utility in Ubuntu recognizes the drive but the partitions are not recognized, shows unknown and the only option available is to format the volume. If I place the drive back into my laptop, the drive boots normally and data is accessible.

I have connected other portable USB drives and they work (NTFS formatted), so USB ports are not the problem.

View 1 Replies View Related

Hardware :: Drive Can Read DVDs But Not CDs

Nov 13, 2010

The CD/DVD drive in a friend's Dell laptop can read data on, and boot, from a DVD disk, but cannot read, or boot, from a CD. This problem exists in both Linux and windows.

View 8 Replies View Related

Debian :: USB Drive Corrupted - Cannot Read Superblock

Mar 16, 2011

I have a removable USB pen drive, that all of a sudden, when it got 99% used, stopped working. When I try to mount it (manually) I get "can't read superblock". I know there is a ton about this on Google and I've read a lot of them, but most seem to be about formatting a drive, or fiddling in fstab. I'm trying to run fsck on it, and it finds errors, (among them: two FAT-tables?) but then it just freezes, and CPU goes to 100 % and I let it be like that for 4 minutes, before aborting. Scandisk in windows is rubbish (fails to start), and running "chkdsk /f F:", in windows, results in nothing, the shell crashes immediately. Is it normal for fsck to get stuck and just chew up CPU? It does not seem to be reading from the drive, according to conky. Also, is it possible to run fsck as normal user, (at my work)?

View 2 Replies View Related

Debian :: USB Hard Drive Mounts As Read Only

Jan 4, 2016

Trying to go through some old hard drives I'd saved from a Mac we tossed years ago. Using a Sabrent USB adapter (USB-DSC9) I connected it to the Debian box and it mounts as /media. Here's the weird thing: although I can read all the random stuff, the directory with all my actual documents shows up as "you do not have the permissions necessary to view the contents". When I try to fix this with chmod, it tells me that the drive is read-only. Grr.

How do I mount the drive so that it's not read-only?

View 7 Replies View Related

Fedora Hardware :: Optical Drive Does Not Read Any Cd

Mar 31, 2010

I have a strange problem with my DVD player. The problem: My device seems not to read any CD (it does read DVDs). Prologue: On a previous installation I had the same problem. But after messing up with that system I made a re-install, and the problem was gone. So I wasn't concerned about the problem any longer. That would be fine, but recently I had to make a new re-install to have space for windows. (I know, I'm a sinful man) But now the problem is there again. And it even is there under windows.

Question: In how far is the hardware damaged or is it a software problem since it once worked? Hardware data:

-Systems: Fedora 12 & Vista
-Laptop: Dell Studio 1555
-Drive: Optiarc Model: DVD+-RW AD-7640S Rev: HD18

What I have been doing to fix the problem:

-I made an update of the firmware and bios with the files provided by dell
-cleaned the lenses (with a clean disc)
-checked log files (both windows and linux)

After setting udev to debug logging I received this

[Code]......

View 2 Replies View Related

OpenSUSE Hardware :: Cannot Read My USB Hard Drive

May 7, 2011

I can not see my usb hard drive here is some information
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00021330 .....

View 9 Replies View Related

Ubuntu :: Find A Way To Read C Drive In Windows XP?

Jan 3, 2010

I've loaded Virtual Box on my laptop - - and would like find a way to read my C drive in Windows XP - - can anyone provide assistance?

View 3 Replies View Related

Ubuntu :: Infected USB Pen Drive Read-only - Can't Format

Feb 1, 2010

I got some documents scanned today and had them put in a USB drive. The shopkeeper informed me that it has a virus, yet he transferred the files onto the USB drive. When I put it into my computer ten minutes later, the drive was not getting mounted. I read up and tried installing usbmount. After installing that, I managed to mount the drive. However, the drive was read-only on Ubuntu. On Windows, I found a virus and tried unsuccessfully to delete it (read-only). I tried again on Ubuntu, but didn't manage to delete the infected file (ReCyCleR/sEtuP.exe). I have now backed up all the files on the disk (except, obviously, the ReCyCleR directory). When I try to format the drive using gParted, I get:

[Code]....

View 6 Replies View Related

Ubuntu :: Thumb Drive Insert Cannot Read

Apr 6, 2010

i inserted a thumbdrive on one of the usb slots on my laptop upon inserting it shows:[sdb] Assuming drive cache: Write through[977.113519] sd 5:0:0:0: [sdb] Assuming cache: Write through

how to read the contents of my thumbdrive?Do i need to mount it first or what should be the procedure?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved