We have a networked L7780 and I cannot find the dependancies below to satisfy the hplip (3.9.2) installer. Centos 5.2 Server - full development environment etc. Standard Centos repos + rpmforge.
INSTALL MISSING OPTIONAL DEPENDENCIES ------------------------------------- warning: There are 6 missing OPTIONAL dependencies. note: Installation of dependencies requires an active internet connection. warning: Missing REQUIRED dependency for option 'network': libnetsnmp-devel
I have a program that needs kernel headers. The machine is running CentOS release 5.4 (Final). uname -r output: 2.6.18-164.9.1.el5 When I try to do a - yum install kernel-devel or kernel-headers I get: kernel-headers i386 2.6.18-194.3.1.el5 updates 1.0 M Why don't they match?
I've got a new 5.5 64-bit install that has been updated to 5.6 this morning. While installing nspr-devel through yum i get stuck at the following dependency:
nspr-devel-4.8.6-1.el5.x86_64 from base has depsolving problems --> Missing Dependency: nspr = 4.8.6-1.el5 is needed by package nspr-devel-4.8.6-1.el5.x86_64 (base) nspr-devel-4.8.6-1.el5.i386 from base has depsolving problems
i'm trying to rebuild mplayer and facing the same error - lame-devel package can't be found as when i try to use rpmbuild. I'm not sure why and how to fix it. Here are steps and information:
I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
I am in the process of creating a kickstart configuration file for some RedHat 5.5 and Centos 5.5 servers (Production and test respectively).I have googled about a bit but I cannot find a good list of the bare minimum packages required for a command-line system.If anyone knows how I can trim this list down anymore it would be much appreciated. The aim of this kickstart.cfg is to get the system booted to a bare minimum required to install Chef (Server management software). Chef will then setup Apache, Ruby on rails environment etc.
All this server will need to do is, from a static IP, Host a Ruby on rails app, send emails, send data to a server on the web, accept ssh and occasionally and connect to a SMB/CIFS share This list was taken from the anaconda-ks.cfg file after a RedHat install of what I thought was a pretty minimal system onto a VM but I noticed that cups, the avahi daemonsand gam_server are installed and running which I do not believe are needed for a pure web server.I know that these types of questions are hard to answer without a complete knowledge of the operating environment and what "minimum" is in this case ("@core only? but I wanted yum damnit!")
I am trying to install the mysql workbench and it is looking for libzib-devel. I can not seem to find it in any yum repo. Does anyone know where I could find it?
The OFED installer says that it wants the sysfsutils-devel rpm, and we are not finding it. Do we just need to set up the right yum repository to locate it? OR - has CentOS 5.5 replaced this rpm with libsysfs-devel or similar?
I show # rpm -qa | grep sysfs sysfsutils-2.0.0-6 libsysfs-2.0.0-6
This is on a new Rocks 5.4 installation that includes CentOS 5.5.
Anyone know if a more complete poppler-devel can be found for CentOS 5.5? There seems to be an enormous number of missing files from poppler-devel (page.h and PDFDoc.h are just two examples) resulting in applications that require it refusing to compile.
I'm working on a Fedora 13 server trying to intal some soft following the same steps I did with some other server with Fedora 12 ( not 13, like the new one ).First problem that I found was with 'yum install kernel-devel'
Response: Nothing to do ! Then I tryed 'yum -v info kernel devel' Response: Installed Packages Name : kernel-devel Arch : x86_64 code....
Second problem that is stopping me is 'yum install gcc' Some dpendency problem that can not be solved. Tryed --skeep-broken but nothing is installed.I don't have gcc on my sistem.
from what I understand kernel-devel does not bring in ALL the header files for install modules. so what i would like to know is how to install true headers instead of using kernel-devel. I found one tutorial, but it was way out of date.
I was trying to compile a new (stable) kernel and got an error when I tried "make xconfi packages and uninstalling 81 packages (will attatch pix once home). I'm using Fedora14 with KDE packages and uninstalling 81 packages. I'm using Fedora14 with KDE so much stuff to get qt-devel?
I found out that to compile my new kernel - which requires 'qmake' - I need to install the "qt-devel" package. Doing so - according to the package manager - would require uninstalling 81 packages and downgrading almost 50 other packages.
I'm running under Fedora 14 w/ KDE and it's asking to remove things like Amarok and OpenOffice. Am I missing a step or something?
Sometimes when we update/upgrade packages we get the restart required icon on the desktop panel which means we need to reboot for the update to complete. Is there someway to know which or what package required the reboot to happen ?
On F13 i386 inside Virtualbox. Host is a Win7 x64 box.
This may just be more idle curiosity than anything else since the server still works. . . but it's really bothering me because I can't explain it.
My (limited) understanding is that the devel files are just the source files and shouldn't actually affect peformance.
Yet, prior to installing httpd-devel (and its dependencies), /etc/init.d/httpd restart takes about 2 seconds total. After installing httpd-devel, the "stopping" phase of the httpd restart take 5-7 seconds (which seems really long when you're just sitting there waiting on it.
yum install httpd-devel also installs the following for dependencies: db4-cxx db4-devel cyrus-sasl-devel apr-devel apr-util-devel openldap-devel expat-devel
All but one of those are devel files as well. And here's the real kicker: Uninstalling them through YUM doesn't put things back to normal (even after reboot).
I'm no linux expert. But I wouldn't think installing devel files would have this effect or any effect like this since they're just source code files (?). Can anyone explain what's happening or give me tips on how I can watch the apache process stop and see what's hanging it up?
Just a random question out of curiosity and probably ignorance. But why have updates started requiring a reboot almost every single time recently? I'm using Lucid, but the rate of required reboots was already on the up in Jaunty. As far as I understood, you should only really need to reboot if something's been changed in the Kernel - is that wrong?
Surely the updates can include restarting of demons or just the software if need be, it's starting to become like windows in this respect....
I have a problem to install the VMware Server (VMware-server-2.0.2-203138.x86_64.rpm) on "Fedora 13 Desktop Edition 64-bit".I traied all tips I found, but nothing was OK.Please look my linux configuration and the error messages:
The installation of VMware Server 2.0.2 for Linux completed successfully.Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl". code....
I have a problem installing RRDTool on Centos 5.4 and it will always come up error dependencies cairo-devel and pangocairo but I already installed this packages.
I have a fedora 11 with kernel package: kernel-PAE-2.6.29.6-217.2.3.fc11.i686
I would like to install the devel package for this kernel version, but I can't find it, because in the fedora repo there is only the original kernel (2.6.29.4....) and in the updates repo there is only the newest kernel package (2.6.30....)
Where can I find the packages which are between the fedora and update repos' versions?
So i have a small home server i need to setup. I used to have arch linux installed, but i found it unstable and more difficult to maintain. So i heard about the stability if CentOS and decided to try it out. I got samba setup no problem, but cups i cannot get to work. The orinter driver for my epson workforce 500 requires lsb 3.2 whereas lsb installed in centos is only 3.1. What can i do to fix this? Should i just go with fedora instead?
I have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.
I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.